rotary transfer used for sale

linear axis:: - travel -x axis: - mm weight max. in kg: - kg total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

longitudinal feed: - mm slides vertical travel: - mm grip- and swivelling device: - weight max. in kg: - kg Control: Sinumerik total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Special price for pickup EXW / EX Foundation from the Osterburken site Linear/gantry axis system in heavy-duty industrial design Long horizontal X-axis 2 vertical linear axes / Z-axes Two separate handling units Rack-and-pinion drive on the horizontal axis Servo motors and gearboxes Power transmission via energy chains Pneumatic components and gripper technology Sensors and limit switches Complete cabling Separate industrial control cabinet Siemens SINAMICS servo drive technology Multiple SINAMICS motor modules / power modules Siemens industrial control and operator components Operator panel on the control cabinet Safety and switching technology Various decentralized I/O and ...

Type: 4 m transfer roller conveyor • Model: N899/2101 • Construction: Aluminum wheel with aluminum driver; aluminum frame guide accepts length and meter sticks easily; includes iron wheel and iron frame sections for durability. • Application: Ideal for supporting material handling near hacksaws or other cutting equipment. Designed for easy integration and manual transfer in fabrication and workshop environments.in very good condition, ready to work Auction-ID: A7-50988-92

CONTROLS   PLC SIEMENS SIMATIC OP 47-12 PRESS FORCES   total force (nominal): 200 to PRESS TABLE   table surface (left-right): 2440 mm   table surface (front-back): 1500 mm SLIDE   table surface (left-right): 1500 mm   table surface (front-back): 1100 mm   stroke: 180 mm SLIDE (MECHAN. PRESS)   slide adjustment: 150 mm   stroke rate (min.): 20 /min   stroke rate (max.): 120 /min   main drive power: 45 kW OVERALL SPECIFICATIONS (COIL LINES)   sheet thickness max.: 2.5 mm DECOILER   sheet width max.: 300 mm   sheet width (min): 30 mm   coil weight max.: 3 to   max. diameter of coil: 1500 mm   mandrel expansion range from: 460 mm   mandrel expansion range up to: 530 mm LEVELLER UNIT   sheet width max.: 30 mm   sheet width (min): 300 mm   number of leveller rolls: 9   diameter of leveller rolls: 30 mm   number of intermediate rolls: 11   feed  ...

USED WIRTH & GRUFFAT C128 TRANSFER MACHINE Serial No.: 1230 Year: 1995 Equipped with 1 SIEMENS PLC 1 Plate / 8 clamping stations W20 7 Pumping units - horizontal and cross drilling Dimensions and weight 1600x1500xH2400mm - weight 950 kg Auction-ID: A1-50950-81

USED WIRTH & GRUFFAT C212 TRANSFER MACHINE Year: 1990 Equipped with 1 10-station tray with clamp clamping 9 Units 1 External lubrication tank with paper filter 1 SIEMENS PLC Dimensions and weight 2800x2300xH2400mm - weight2500kg + 1 pallet 2400x1200xH500mm - weight 300kg + loader 2000x1000xH2000mm - weight 800kg + conveyor 3000x1600xH1400mm - weight 400 kg Auction-ID: A1-50950-82

The 12V submersible pump can be used for fast refueling of diesel fuel, transfer of water and fluid oils from storage tanks to various vehicles without leakage. Auction-ID: A7-50799-412

The 12V submersible pump can be used for fast refueling of diesel fuel, transfer of water and fluid oils from storage tanks to various vehicles without leakage. Auction-ID: A7-50799-312

The 12V submersible pump can be used for fast refueling of diesel fuel, transfer of water and fluid oils from storage tanks to various vehicles without leakage. Auction-ID: A7-50799-459

7x used VAT vacuum valves Model: 5x 02005 | 2x 03112 Auction-ID: A1-50936-58

Motorized Transfer Control Handles for Steris C-MAX Tables Enable effortless and safe patient transfer. Compatible with Steris Cmax S, Cmax T, Cmax L and other operating tables Condition: Good, functionally tested Auction-ID: A1-51275-62

ALM TAB 302 – Operating Table Transfer Cart Manufacturer: ALM Model: TAB 302 Part Number: 549274999 Condition: Good, Functional Tested Auction-ID: A1-51275-72

ALM Transferis – Wireless Infrared Remote Control for Operating Table Manufacturer: ALM Model: Transferis Condition: Good, Functional Tested Auction-ID: A1-51275-73

Stainless steel transfer pump for liquid product Stainless steel protective guard Height-adjustable stainless steel legs Equipped: - Wheel rotor diameter 170 mm - Inlet port: 50 mm diameter, clamp connection - Outlet port: diameter 65 mm, clamp connection - Motor drive Capacity: Approximately 11 m3/hour depending on the nature of the product Engine power: 5.5 kW Auction-ID: A1-51318-211

Vanton FLEX-I-LINER rotary peristaltic pumps transfer samples or dose ultra-pure acids, caustics, solvents, salts, chlorides, and chemicals, even viscous fluids up to 6,000 SSU (1,300 centistokes). - Their gentle pumping action allows the pumping of latex emulsions and other shear-sensitive liquids. These seal-free self-priming pumps work in both directions, dry or wet, in any position. Flow rates from 0.1 to 26 L/min (33 gpm) to 9 m³/h (40 gpm) at pressures up to 310 kPa (45 psig). Temperatures up to 121°C (250°F). ABB brand engine. Engine power 0.37 Kw. Inlet and outlet connection with a diameter of 20 mm. Auction-ID: A1-51318-242

Stainless steel transfer pump for liquid, thick and foaming product Equipped: - Stainless steel jacketed pump casing - Food-grade rubber rotor - Stainless steel pigtail stator - Inlet port: 25 mm diameter reduced to 10 mm - Outlet port: 25 mm diameter reduced to 10 mm - Motor-inverter drive Chassis mounted with casters Capacity: - Maximum flow rate from 2 to 40 liters/hour depending on the nature of the product - Max pressure: 6 bar Engine power: 0.25 kW at 1425 rpm Auction-ID: A1-51318-244

This is a Product Pump with the Balance tank for viscous products ie. yoghurt, pastes, cream, etc. It is designed to transfer the product from A To B without overheating or beating the product. This is located on skid with an extra high speed volume pump for the CIP wash down of the system. Control panel is included in the line., Product Pump: For viscous Products , CIP: Special CIP Pump on the skid , Stainless steel: Yes , Electricals: 3 phase / 400v /50-60hz , Available: Immediately

Material: aluminum. Platform height: 83cm. Platform dimensions: 80x80cm. Auction-ID: A1-42990-1037

Material: Galvanized steel. Platform height: 154cm. Platform dimensions: 178x103cm. Auction-ID: A1-42990-1038

Performs western transfers simply, efficiently, and reliably, in seven minutes and without liquid buffers THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-51527-36

ALM Transferis – Electric Operating Table Manufacturer: ALM Model: Transferis Auction-ID: A1-51618-24

Material: Galvanized steel. Platform height: 121cm. Platform dimensions: 102x92cm. Auction-ID: A1-42990-1039

Material: Galvanized steel. Platform height: 148cm. Platform dimensions: 100x112cm. Auction-ID: A1-42990-1035

pressure:1000 t table length:4000 mm table width:1600 mm Controls:SIEMENS S7-1500F PRESS DESIGN:. - frame design : Transfer press :. - Drive type : mechnical :. - openings in uprights : yes :. - opening in table : yes :. - moving bolster : yes :. - number of tables:2 PRESS FORCES:. - total force (nominal):1000 to PRESS TABLE:. - clamping surface (left-right):4000 mm - clamping surface (front-back):1600 mm - height above floor level:600 mm - autom. tool clamping device : yes :. RAM:. - stroke:400 mm RAM (MECHAN. PRESS):. - ram adjustment:300 mm - ram adjustment:100 mm - number of strokes min:8 /min - number of strokes max:50 /min - hydraulic overload protection : yes :. TOOL ASSEMBLY DIMENSIONS:. - shut height (stroke down, adjustment up):900 mm - shut height (stroke down, adjustment up):766 mm - distance between columns (H-frame):4250 mm - Free passage between side c ...

Almost unused used CNC rotary axis from ISEL Automation ! By exception, a competitor's product. From a payment of a complete CNC fraes machine from ISEL due to the switch to a T-Rex CNC Fraes machine from CNC-STEP Top exact product, solid, stable processing. A few years old but top in shot. 100mm Holder for chuck 23mm Throughlet Height 320mm Width: 21 0mm Stabile cast aluminum discharge 4 Screw fasteners on the foot step motor 6.0 Ampere ! Controltable up to 48 volts Please also note our other CNC machines offers;

BOSCH Professional GBH 3-28 FE rotary hammer. 720 W, impact energy 3.3 J, 0-4000 blows per minute, 0-800 rpm, weight 3.3 kg. Drilling capacity: concrete 4-28 mm, masonry core bits up to 80 mm, steel 13 mm, wood 30 mm. New old stock item. Further technical specifications are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-58

All unused Auction-ID: A7-51245-76

Type: 62416, rotary wheel valve with pre-valve flat slider, drive via spur gear motor with 3 kW / 42 rpm. Little ran.

Type: 9.3-456, Y.O.M.: 1991, inlet: 400 mm x 400 mm, overhauled, without motor.

Stainless steel pumps, Hilge, Fristam, various versions and sizes

Stainless steel pumps, Hilge, Fristam, various versions and sizes, various models, partly new

Cat.-No. 13-0290 in very good condition Operating pressure test at 2.0 bar Test medium: water at 22 ° C at 1 bar pressure Capacity: 2400 l / h Engine power: 2.20 kW, 50 Hz Connections: inlet and discharge pressure DN 65, thread according to DIN 32676 -can be converted against extra charge With frequency inverter infinitely variable (surcharge) on request Dimensions and weight: Length: 850 mm width: 380 mm height: 770 mm weight: 125 kg Note: 100% pump all prices apply ex works plus gesetzl.MwSt tested with warranty. Delivery: from 97753 Karlstadt Karlsburg freight expenses: reserved to standard equipment sale

1 of second-hand but unused! Thiele rotary placer (coupon feeder). Type 400. New 1985. Maximum speed 400 coupons/minute. Min/max coupon size: 38x38 - 152x152 mm. Size adjustable. Wired for 115V/60Hz.

intake cross section: 1,600 x 1,200 mm motor power: 2 x 45 kW knife width: 55 mm knife number: 56 pieces rotor flight circle: 655 mm Planetary gearbox

; very good

; see pictures

Material: steel Engine: 7,5 kW Weight: 8500 kg Length x Width x Height: 7500 mm x 2000 mm x 3000 mm With working platform Turning pipe: 44 U/min Length 5950 mm, diameter 1700 mm; two draft. Very good condition, overhauled. Are you looking for something else? Write us below! WE PROJECT AND BUILD YOUR ENTIRE PLANT EXACTLY FOR YOUR NEEDS FROM USED AND NEW MACHINES.

Kat. No. 12-1170 in a very good condition Measurements and weight: LxBxH: 140 x 64 x 117 cm weight: 160 kg type: SRZ4 / 055LD Serial No. 279503 4,4 kW DN 65 130 l/min., 7800 l/h 7,5 bar For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

This rotary valve was used, was only used for spare parts storage for a foreign project and was therefore never in use. The rotary conveyor thus has no operating hours and is in a new condition. The rotary valve, with square inlet, is suitable for the controlled supply and dosing of powdered and granulated bulk materials from silos, funnels, pneumatic conveyor systems, filter systems and cyclones. Name: Rotary valve Manufacturer: Sunds MDF Type: LAF-200 Year of construction: 2010 Material: Normal steel Drive motor: 11 kW Dimensions: L 3400 x W 2200 x H 2370 mm Empty weight: approx. 4500 kg Speed: 1475 / 22 Condition: Used Tech. Documentation: No Note: Inlet L: 1980 mm x W: 1180 mm, Outlet L: 2180 mm X W: 1000 mm, 7 chambers. The rotary valve has no operating hours and is in a new condition. Price: On request

Cat. No. 12-1120 in very good condition Type 125VT-DS Model: HTIRM Size: NW 65 Serial-No. 1251149 Original Price: Euro 30.000,- Measurements and Weight: LxWxH: 166 x 52 x 102 cm Weight: 330 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Blow-through lock, all-out lock, cell lock, rotary valve, cell wheel lock, dosing lock used AZO GmbH Type: Z100/5 F 4.6 Inlet approx.: Ø 250 mm Height approx. 450 mm Cell wheel Ø approx. 300 mm Rotary wheel width approx. 250 mm Wing height approx. 15 mm approx. 8 cells Hole circle flange Ø approx. 335 mm with intake filter NW 100 EIT-4181 geared motor Sew 0.18/0.66 kW 7.3/30 rpm 380 V Total dimensions approx.: 1800 x 400 x 450 mm The lock was used in the food industry. Presumably for transport and dosage of flour. used Rotary Valve, Rotary Airlock, Dosing Valve, Dosing System Changes and errors in the technical data, information and prices as well as intermediate sale reserved.