rotary transfer used for sale

Type : Reception turntable Diameter : ? 100 cm Mechanical speed variator Materials : stainless steel

· Rotary Die Cutting Machine with Magnetic Cylinder · Easily replaceable die · Automatic feeding with double sheet detection and automatic correction · Double magnetic cylinder with anti-splitting coating · Indicated for slit and semi-cutting in adhesives, labels, cardboard, etc. · High pile suction feeder · Touch screen · Machine with automatic stripping · Front registration TECHNICAL SPECIFICATIONS · Max sheet size: 480 X 740 mm · Min sheet size: 240 X 280 mm · Max final product size: 456 X 720 mm · Min final product size: 50 X 80 mm · Min distance (depends on the material): 5 - 8 mm · Max die size: 480 X 750 mm · Min die size: 160 X 100 mm · Die height: 1 mm · Die cutting accuracy: ± 0,1mm · Material thickness (die cutting): 0,2 - 0,5 mm · Material thickness (max creasing): 0,4 mm · Feeder stack height: 500 mm · Max speed (depends on t ...

Jabsco Hy-line rotary lobe pump, model LH440-3890

Stainless steel rotating valve. Diameter 250 mm. Motor 0,75 kW, IP 55.

Type: Hopper and Rotary vane Materials: stainless steel (hopper) Nominal diameter: 600 mm. Motor power: 0.37Kw Pneumatic transfer Useful tank volume: 230 L

wheel alignment scissor lift 5t, galvanized, Specifications: Stroke underfloor 1,800mm, stroke above-ground 2,160 mm Overall length 5,200 mm, overall width 2,300 mm, ramp height 360 mm, platform length 5,200 mm, Platform width 729 mm, motor power 3 kW, electrical connection 230/400V, 50 Hz, compressed air connection 6-8 bar, Lifting time 45 sec., lowering time 45 sec. Characteristics: Electro-hydraulic drive,2 maintenance-free hydraulic cylinders, No mechanical connections between the rails,Maintenance-free roller lafers, HD unit integrated in the control panel, operation via push buttons with integrated storage option, Integrated hand pump and emergency lowering in case of power failure, Hydraulic synchronization system with automatic level compensation (master-slave system)Pneumatic set-down device with automatic pressure system. Unlocking, non-contact inductive proximity swit ...

Rotary actuator, hydraulic motor HKS rotary actuators Type: DA-H 125 - 180 Rotation angle 180 Operating pressure max. 210 bar Nominal torque max. approx. 5000 Nm Shaft diameter 70 mm Shaft pin length 140 mm Keyway width in the shaft 20 mm Flange diameter 222 mm Centering diameter 150 mm bolt circle 195 mm Connection thread 1/2 flange with 8 mounting holes 18 mm - 2 pieces screw-in fittings from 1/2 to 16S Overall length housing without drive shaft, without centering edge 384 mm Overall length housing with drive shaft 535 mm Weight 70 kg very good condition - New, unused from stock dissolution; used

FHS roller conveyor transfer pusher transfer pusher ejector 90° 4300-510-450RA1960 Make: FHSRunning direction: both directionsRoller width (RB): 450 mmNominal/outer width (NB): 510 mm / 650 mm with chain guidelength: 4300 mm2x oversliderwidth of slider: 1500 mmdiameter rollers: 50 mmroller distance: 75/100/125 mmMotor overslider and roller conveyor: SEW motor 300-500VFrame height: 140 mm/250 with chain guideConveyor speed: freely adjustable with frequency converterScope of delivery: without supports, without side guide 1x Movi-Mot frequency converter, 5x light barriersOptionally available:Side guide on one side and on both sidesSupports Features: angle: 90° KW: 0,18/S1, 0,75/S1 Roll width in mm: 450 Roll division in mm: 75, 100, 125 Conveyor speed m / s: freely adjustable Electric data: 380-500 Engine type: SEW Movi-Mot Nominal / outside width in mm: 510 / 650 Conveying length in mm ( ...

Rotary indexing machine Special machine with several assembly stations Hydraulic press + spot welding machine + much more Production and assembly system in rotary transfer process for front panel AC-DC connection plates rotary indexing machine manufacturer: AKE-technologies GmbH Serial number: 01-45-064 Number of mandate: 11111 Year of construction: 2012 - large rotary indexing table - pressing station with TOX power pack - 2 welding stations for resistance welding - several vibation conveyors - conveyor belts - testing station space requirement L x W x H approx. 3500 x 2750 x 2300 mm net weight approx. 4000 kg; used

Number of drill units 7 Number of tapping units 4 Number of clamps 8

The machine is in good technical condition. Working spindle diameter: 80mm Table dimensions: 900x1120mm By prior arrangement, the possibility of a tour in progress.

in good technical condition. Working spindle diameter: 100m Clamping surface of the table: 1000x1120 A tour is possible by prior arrangement.

The machine is in good technical condition. Working spindle diameter: 80mm Dimensions of the table surface: 1000 x 1090 mm Work spindle conical cavity: Morse 5 Work spindle extension: 710mm Weight: 10,850 kg By prior arrangement, the possibility of a tour in progress.

Type: SR 1600/10000 Location: Czech Republic tour possible good condition

Machine in good technical condition, possibility of testing after agreement. Control system FAGOR year of manufacture 1997 Accessories: rotating knife head + additional dovetails behind the knife head for additional equipment (another knife holder or Morse taper drill equipment).

The machine is in good technical condition. Machine parameters: Table size 4800mm x 1050mm. Travel axes X/Y/Z 4000mm, 990mm, 1300mm Engine power 22/26KW. By prior arrangement, the possibility of a tour in progress.

The machine is in good technical condition. Separating force: 220 kN Travel X: 2500 mm Travel Y: 1250 mm Control system BOSCH Rotary head In operation: 36200 h Accessories: 2 tool cartridges USB interface Weight: 11050 kg Upon prior agreement, the possibility of inspection while in operation.

The machine is in good technical condition. Max. grinding diameter: 605 mm Max. workpiece diameter: 630 mm Spike distance: 5000 mm Maximum workpiece weight: 3000 kg Machine weight: 18000 kg By prior arrangement, the possibility of a tour in progress.

The machine is in good technical condition. Table size 1500x3000mm + accessories for rotary burning of tubes. Source Alpha In -Pegasus 2 burners / small+large By prior arrangement, the possibility of a tour in progress.

table diameter: mm stations: 10 axis stroke (X,Y,Z): 250 / 400 / 400 mm control: Siemens 840D total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Rotary cycle machining center for machining serial parts. 10 stations 31 NC axes Control: Siemens 840D Maximum productivity through parallel work processes on up to 9 stations Loading and unloading can be automated in parallel to the main time Travels X / Y / Z: 250/400 / 400mm 10 planet carriers rotatable 360 ° for clamping devices, incl. Media feed-through for hydraulics and pneumatics 5 stations equipped with 6-fold revolver make Sauter Machine hours as of December 20, 2020 Operating hours 15,024 h Production hours 8,115 h Manufacturing costs: € 1,200,000 The application on customer workpieces can be offered. The data for this ad was created with ModulMWS - the software solution of Log ...

The machine is in good technical condition, it is possible to inspect it in operation by agreement. Circulating diameter: 320 mm Distance between spikes: 1000 mm Max. workpiece weight: 300 kg Power of the main electric motor: 9.5 kW Dimensions L x W x H: 4890 x 2320 x 1720 mm Machine weight: 5100 kg.

Length: 8225mm, width: 3200mm, with documentation.

Max. workpiece diameter: 42mm, connected load: 132kVA, length: 4600mm, width: 7500mm, height: 3000mm, with bar loader.

Mayfran coolant system with Knoll high-pressure pump for internal cooling Scraper Belt Chip Conveyor Mayfran Bar loading magazine 3 m Equipment: 1 x Sawing unit 6 x Feed unit 1 x Turning unit 1 x Grooving Unit 1 x Thread Rolling Unit 16 x Collet SW36 1 x Saw and Turning Bushing SW36 1 x conversion kit of the turning unit up to SW41 1 x Control Pin Turning Station Unit 8 2 x Hydraulic Drill Head 3 x Angle Milling Head

Semi-automatic Year of manufacture/SO/GO: 1988/-/2003 Machine in good technical condition, after agreement possibility of testing. - Possibility of agreement - in case of agreement, in case of consultation, available for consultation - control system NS660, data input and output from PC via communication adapter TRANS - including chip conveyor - including many types of tool holders

The machine is in excellent technical condition. Maximum machined diameter [mm] 1000 Maximum machined diameter above bed [mm] 650 Maximum turning length [mm] 2850 Maximum spindle speed [1/min] 25-850 (gearbox) Spindle motor power [kW] 15 Spindle passage [mm] 105 3-jaw chuck [mm] 500 Number of tools in head 4 32x32 tool quadrant Horse MOHS (morse) 6 Spindle type C11 Spindle motor power [kW] 15 Servomotor X Fanuc 12Nm Servo motor from Fanuc 22Nm Fanuc Oi-FT system plus Czech Accessories: Bezel 350-650mm Chuck 4 jaws 600mm and centering tip Chip conveyor Machine weight 7000kg Overall dimensions (mm) 5450x2000x2000 By prior arrangement, tours in progress are possible.

The machine is in good technical condition. The size of the table - tub for placing the material to be cut is 3000 x 2000mm Control system: Nessap 16 - the machine has a WRYKRYS program in which a cutting program can be created on the computer and then uploaded to the computer at the beam. Accessories: a set of water jets including a hopper for abrasives Voltage 380V Pressure 3200 ATM cutting height 100 mm The water jet is suitable for cutting various materials such as marble, sandstone, glass, tiles, ceramics, plastics, wood, rubber, laminates, sealing and insulating materials, floor coverings. The main advantage is cutting steel, stainless steel and non-ferrous metals, where the cutting edge is not affected by heat. Also suitable for stonework. By prior arrangement, the possibility of a tour in progress.

Transfer machine with electronic arm. • MANUFACTURER: GNUTTI • MODEL: FMF-14-U-130 • YEAR OF CONSTRUCTION: 1993

Equipment: 1x sawing unit, 6x feed unit, 1x turning unit, 1x grooving unit, 1x thread rolling unit, 16x collet chuck SW36, 1x sawing and turning bush SW36, 1x conversion kit of the turning unit up to SW41, 1x control journal turning station unit 8, 2x hydraulic drilling head, 3x angular milling head, documentation, connected load: 24kW, control: Lauer PCS-110, operating hours: 41,918h, with bar magazine, Mayfran coolant system with high pressure pump Knoll for internal cooling, scraper belt chip conveyor Mayfran.

Almost unused used CNC rotary axis from ISEL Automation ! By exception, a competitor's product. From a payment of a complete CNC fraes machine from ISEL due to the switch to a T-Rex CNC Fraes machine from CNC-STEP Top exact product, solid, stable processing. A few years old but top in shot. 100mm Holder for chuck 23mm Throughlet Height 320mm Width: 21 0mm Stabile cast aluminum discharge 4 Screw fasteners on the foot step motor 6.0 Ampere ! Controltable up to 48 volts Please also note our other CNC machines offers;

Hydraulic rotary indexing table with face teeth FIBROTAKT Hydraulic rotary indexing table, rotary table type Y 13 630 FN3RA T6 Fabr. No. 11 136-0840 Year of construction 1981 Table diameter 630 mm Table height = height 250 mm Table passage 50 mm Switching angle 60 Hydraulic working pressure 30 bar - fixed switching step of 6 pitches - Face toothing for highest part accuracies - Hydraulic drive - Table structure with 6 hydraulic clamping devices (inner collets 90/100 mm) Space requirement table L x W x H 700 x 700 x 250 mm Space requirement with structure L x W x H 1380 x 1380 x 800 mm Weight table approx. 600 kg Weight with superstructure 1350 kg good condition; used

Container rotary device, horizontal rotary tables, welding rotary device, welding rotary device, welding device, welding rotary table, welding rotary and tilting table, welding rotary device, welding rotary tilting table, horizontal rotary table -Horizontal turntable: on a solid base frame -Load capacity: kg -Table surface: Ø 2140 mm -Speed: 0.25 rpm -Transport dimensions: 2500/2430/H1065 mm -Weight: 1030 kg

4" PNEUMATIC TRANSFER PUMP

System includes (1) CNC Transfer Machine Gnutti DF-12, connected load: 120kW, weight: 22t (2) Rotary Transfer System Mako RL10 (3) Washing Machine Mako WM3 MZ3, washing pressure: 80bar (4) Chip Shredder ZVD 600-J with VRF 900/6600 filter system, screw pump KTS, VRF vacuum rotary filter, chip conveyor (5) 5x Industrial Robots ABB, system length: 10,858mm, system width: 9798mm, with documentation, on-site inspection is possible.

Enclosure transfer element photovoltaic system GAK transfer element RJ45 for I ´ checker connection Manufacturer Wieland GET solar new, fully assembled Price per piece 400,00 6 STK. in stock

Power rotor diameter: 25mm, Design generation : 3, RPM : 3600 max, Max. inlet.: 7 bar, Power: 0.3-1.1 Flow: 10-30.4 L/min, Max. Discharge pressure: 16 bar BERGEN BRM, WARTSILA, DEUTZ KHD/MWM, MAN B&W, JENBACHER, ABC, PIELSTICK , GUASCOR, MAK, CATERPILLAR, VOLVO, WICHMANN, PUMPS, SACM, SEPERATOR, COMPRESSSOR, FILTER, PUMPS, VACUUM SAVAGE SYSTEM, HEAT EXCHANGER & COOLER. Spares are available and all kinds of spare parts can be given. Please contact us for your questions. EVE International AS E-Posta : info@eveinternational.com.tr Phone : +90 0216 519 2707 Fax : +90 0216 519 2720

Transfer press KRUPP PST-A 160 built in 1980. Technical data of the KRUPP PST-A 160 press: - nominal pressure: 160 tons - cutting force grade 1: 400 KN - force between stands: 1200 KN - number of working steps including cutting stage: 11 - distance between stands: 200 mm - slider stroke: 210 mm - drawing depth: 70 mm - range of jumps, infinitely adjustable: 15-75 / min. - production range of jumps with repeatability of its setting: 25-75 / min. - number of actuation movements: 15-25 / min. - a usable work resource for a jump in the range of 25-75 strokes per minute. : 20,000 J - maximum load on a single step: 500 KN - maximum load of a single step using inserts: 630 KN - maximum width of the tape: approx. 340 mm - maximum diameter of the cut: 120 mm - minimum diameter of the pattern: 30 mm - distance between stands: 2450 mm - height of tool building at the lower posi ...

The scope of delivery includes: 02x Pallet rack beam, used Material colour: RAL 2004 orange Box profile: 145 x 50 x 1.75 mm Truss type: PNB0445 clear width: 3,600 mm 02x Pallet transfer station, used Material colour: RAL 2004 orange Box profile: 145 x 50 x 1.75 mm Truss type: PNB0445 clear width: 900 mm 01x L-angle, used Material colour: RAL 2004 orange Total length: approx. 1,100 mm L-profile: 100 x 50 mm Material thickness: approx. 3.00 mm Borehole grid: 50 / 50 mm 04x Screws M10 x 25 mm ISO4017 04x Nuts M10 self-locking 04x Washers M10 04x locking pins, used Finish: completely galvanized To secure the longitudinal beams against unintentional lifting Technical data for the pallet transfer station: Shelving system: Stow Type: Pal Rack NS Ideally suited for the following dimensions: Stand depth: 1,100 mm / 995 mm Stand profile dime ...

M. No. : 6064/11 6708 Equipment / Additional information: Working width: max. 550 mm Product transport: 5 pieces flat belts - transport elements Departmental equipment: 5 pieces breakout elements with blown air Speed: 1 - 165 m / min, infinitely adjustable Mobility: mobile with wheels and feet

infinitely variable speed control, Motor: 11 kW - 400/880 V - 21.50/12.60 A - 50 Hz - 1475/106 rpm, Mounted on a stainless steel frame. Pump can be moved into the frame for maintenance/cleaning.

CONTROLS   CNC controls Machine in good condition (IBN 11/2018).Equipment:- Evolut automation- Kuka robot teaching and Kanban.Sequence:- Feeding - separation- oriented loading- 8 processing stations (incl. 2 press-fit bushings)- Packing in blister (with robot)

Workpiece dimensions: 140x180mm, load: 21kg, length: 9300mm, width: 3400mm, height: 3500mm.

X-travel: 570mm, y-travel: 320mm, z-travel: 265mm, B-travel: +/-130°, C-travel: 360°, max. workpiece dimensions: 150x150x100mm, connected load: 40kVA, controls: Bosch Rexroth MTX, weight: 16t.