rotary table 4000 used for sale

Inv. Num. : 6701 Type: 4000 kN Producer: Hydraulico Created: 1977 Parameters: Control system: SIEMENS SIMATIC OP Compressive force: 4000 kN Stroke: 800 mm Table height: 680 mm

Inv. Num. : 6637 Type: SRM 125-4000 Producer: Škoda Generated: Parameters: Control system: SIEMENS SINUMERIK 828 D Maximum turning length: 4000 mm Maximum turning diameter over bed: 1250 mm Maximum turning diameter over support: 900 mm Maximum workpiece weight: 14000 kg Turning diameter: 1030 mm Travel speed of the Z-axis and X-axis: 2000 mm/min Rapid traverse X: 3000 mm/min Rapid traverse Z: 6000 mm/min Equipment: Feed drives Siemens DRO Heidenhain

pressure: 1.000 t nominal power: 10.000 kN stroke length max.: 1.650 mm working feed: 62 mm/sec weight of tools max.: 40.000 kg voltage: 400 V total power requirement: 420 kW weight of the machine ca.: 254 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1600 KW, 1935 kVA, 400 V

We are selling our complete containerized Natural Gas power plant based on a MTU 4000 V16 gensets with 1600 KW power output. The power plant has a total working hours from new of 40 800

Recon Part number: 524 030 12 20 EX59403800070/42 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: EX52710100083 CCC 5337 950 0011 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part number: 524 050 00 01 X52405100022 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Ref. -No.: 10369 Manufacturer: MONFORTS Year of construction: 2005 Type of control: CNC Control: MTCK/Euro Turn Storage location: Halberstadt X stroke: 450 mm Z - stroke: 3850 mm Centre Distance: 3970 mm Feed Capacity - Z: 20,7 kN Feed Capacity - X: 10,1 kN Rapid Travel Speed X-Axis: 4 m / min Rapid Travel Speed Z-Axis: 5 m / min Tailstock Quill Diameter: 125 mm Tailstock Quill Stroke: 200 mm Circumference diameter over slideway: 830 mm Circumferential diameter over radial slide: 540 mm spindle taper diameter: 140 (Metrisch) mm Quills Morse taper: MK6 Max swing diameter: 900 mm

Ref. -No.: 10313 Manufacturer: MONFORTS Year of construction: 2001 Type of control: CNC Control: EUROTURN Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 164 01 Machine length: 6200 mm Machine width: 2110 mm Machine Height: 1995 mm Weight Of The Machine Ca.: 7,7 t X stroke: 450 mm Z - stroke: 3850 mm Chuck diameter: 315/400/500 mm Turning Diameter: 630 mm Turning Length: 3000 mm Centre Distance: 3985 mm Spindle Head: DIN 55027 - 11x290 Feed Capacity - Z: 23,9 kN Feed Capacity - X: 11,3 kN Rapid Travel Speed X-Axis: 4 m / min Rapid Travel Speed Z-Axis: 5 m / min Tailstock Quill Diameter: 125 mm Tailstock Quill Stroke: 200 mm Space requirement: 7500 x 3500 mm Circumferential diameter over radial slide: 540 mm mm spindle taper diameter: 140 mm Jaw chuck diameter: 400 mm jaw continuity: 102 mm Quills Morse taper: 6 Max swing diameter: 830 mm travel of the cross slid ...

Turbocharger for MTU Engine 4000 Series Unused from stock. There are several Different Types

Recon Part Number: SEV1X Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

sheet width: 0600 mm coil outside dia.: 1500 mm weight max. in kg: 4000 kg width of sheet max. ca.: 3,60 mm sheet thickness - min.: 0,80 mm diam. of the rolls ca.: 80 mm nomb. of straightening rolls: 7 feed rolls: 2 speed: 5-30 m/min range of expansion ca.: 475-535 mm expansion: hydraulisch pinch roll: hydraulisch total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Decoiler type MS 4000 - Hydraulic spreading - Hydraulic pressure roller from above - Swivel-in limit roller at the front, contact disc at the rear - Auxiliary drive - Reel movable - Coil lifting table Straightening machine type MR 58 Rollers hardened and ground. - Pneumatically ventilated feed roller - Straightening rollers adjustable as a block - Lateral belt guidance at the inlet - Hydraulic band insertion aid - Straightening head can be opened - Large roll basket and transfer table at t ...

Recon Part number: 526 050 00 01 X52605100017 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

CNC Gear Gringing machine HOFLER H4000 Year 1990 Maximum Workpiece Diameter 4000mm Gear Width 1560mm Module 3-32 Number of Teeth 12-768 Maximum Angle of Teeth 35 R/L Grad Pressure Angle 14-31 Degrees Table Diameter 1900mm Table Bore Diameter 750mm Maximum Workpiece Weight 35000kg Grinding Head Stroke 1600mm Ways hydrostatic Coolant, Filtration System Way Covers: rubber roll-up, metal telescopic and bellows neoprene Power 3 PH / 60 Hz / 230 – 460 V Equipped with: Reutlinger balancer Oil mist extraction system HOFLER TPF-40/1100 measuring machine Year: 1990 Max. Gear Diameter: 4000mm Both machines are in Excellent condition This machine was used to grind the gears for the US nuclear submarine transmissions (gearboxes). The machine was originally purchased new by General Electric for the Lynn Massachusetts Facility. We purchased it from them in excellent c ...

Commonrail Pump Used from experimental setup. Few hours

NOVAR ACTIVE 4000 CNC milling machine built in 2002 in Italy is the perfect choice for even the most intensive production challenges. The machine allows for efficient machining of large-sized workpieces with a maximum weight of 10 tonnes with reliable components in the form of cutting tools and a high-speed spindle. The installed HEIDENHAIN TNC 426M CNC control additionally guarantees seamless operation of the machine and utilisation of its full potential and capabilities. The NOVAR ACTIVE CNC bed milling machine has been continuously serviced and has new bearings on the spindle. The total weight of the machine is 27000 kg. Technical parameters of the NOVAR ACTIVE 4000 milling machine - CNC control: HEIDENHAIN TNC 426M - feeds in the X/Y/Z axis: 3500/1100/1400 mm - rapid traverse in the X/Y/Z axis: 8000/10000/10000 mm/min - work table surface (L x W): 4000 x 1000 mm - maximum wor ...

bearing diameter: 120 mm motor: Synchronmotor Nominal turning speed: 3000 1/min Maximum turning speed: 4000 1/min Torque: 76,4 Nm current: 38 A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

New Part number: 526 070 12 01 EX52607300010 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list.

New X52407500024 X52407500050 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Recon Part number: 002 180 34 01 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

As good as new Part Numbers: 524 020 36 05 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Aluminium angled conveyor belt with substructure incl. adjustable feet as well as machine feet for levelling unevenness horizontal area: 1,500mm Rising Area: 4,000mm Angle of inclination in bend 45° Discharge height: 3,000mm Height of horizontal: 200mm Execution: Aluminum construction - 2-fold profile reinforced 90x45mm Drive roller + deflection roller S235 steel welded and machined Ø100x420mm convex overtightened, shaft fixed with tension bearings. Propulsion: Slip-on geared motor 0.55KW, speed 0.3m/sec Connection 230/400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU incl. corrugated edge PU petrol matt Conveyor belt width: 400mm 2 pcs. corrugated edges 50 high, 35mm wide, high-frequency welded 28 T-40 cleats, approx. 400mm pitch Belt mate ...

As good as new Part number: 524 020 37 05 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Silo 4 m³ volume, payload 4200 kg, Net weight 720 kg Diameter 1800 mm, Height 2400 / 3430 mm Spout height 1100 mm Outlet NW 250 Inspection/filling lid in silo roof NW 500 Silo butterfly valve Platform + Vertical Ladder

As good as new Part number: 524 020 38 05 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

As good as new Part number: 524 020 39 05 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Brand NN Year of Make: 2021, New/Unused Dimensions LxWxH (mm) 10.000 length ( 4000kg) Number of units in stock 5000 Terms of sale Contact us

automatic baler Manufacturer: HÖMA Type: BP 4000 PA Year of construction: 08/1991 Technical Data: Press force: 40 t Filling opening: 1,350 x 820 mm Bale size: 755 x 900 x 600 - 1,200 mm Bale weight: up to approx. 400 kg Setting: 4-fold horizontal Transport dimensions: Length: approx. 5,650 mm Width: approx. 2,200 mm Height: approx. 2,350 mm Weight: approx. 6,180 kg

Working widths: 4000 mm Roller width: 4200 mm Number of rollers: 2 Stück Supporting roller - dia: 490 mm Roller covering - soft rubber: 75 Grad shore Swimming roll - dia: 340 mm Roller covering - soft rubber: 75 Grad shore Pressure line: 50 N / mm Pressure total: 21 to Liquor trough with guide roll: heb + senkbar Cloth guiding system: Leitwalze vor der Fuge Drive side: Links Operting side: Links Compensator: pneum. Entlastung Drive shaft: Durchmesser 70 mm required power: 30 m/min =10 kW Hydraulic unit for combined pressure: • 2-Bowl-Finishing-Padder with 1 Swimming roll (S-Roll), • with double-trough for double-dipping • can be used as full-bath-dipping or indirect back swash • machine can be compeletely overhauled before delivery (The picture is showing a scheme of this padder type) • in addition a new frequency drive is possible for the adaption of this machine into a co ...

Robot Laser Welding and Cutting Cell / Laser cutting and welding cell Year of manufacture 2018 Wenige Arbeitsstunden / not many working hours Robot Fanuc M-710iC/70 Control CNC: Fanuc R-30iB) + MFP Payload / lifting max: 70 kg Repeatability: ± 0.04 mm Working range: 2050 mm IP54 Fiberlaser source: IPG Photonics Model YLS-4000-S2T-Y16 Power: 4kW Cooling system. Two outputs optical and permanent connections of welding and welding Laser Cutting Heads / Two outputs optical and permanent connections of welding and laser cutting heads. Source dimensions: 856 x 806 x 1206 mm; Weight / weight: 330 kg; Power supply: 400–460 V/3P + PE at 50–60 Hz; Operating current at: 4000 W and 400 VAC: 20 A Laserschneidekopf / laser cutting head: HIGHYAG BIMO-FSC Laserschweißkopf / laser welding head: IPG Photonics. FLWO-D30 Vertical Welding: Fronius 7000 Doppe ...

Used Feintool HFA 4000 equipped with Feeder Line Saronni total force 2500-4000 kN blank holder force 200-2000 kN back pressure force 100-1000 kN shearing force 1000-3700 kN safety distance 14 mm FEEDER LINE brand SARONNI year 2006 - completely overhauled in 2012

table length: 4000 mm table width: 2000 mm : 28 mm table height: 815 mm : kg weight of the machine ca.: 1,3 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Ribbed underside for reinforcement. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Commonrail Injection Pump ( New from stock ) For MTU engines : 12 V 4000

Packaging machine Paper machine, Upmatic 4000 PA for pack sizes from 1.5 kg to 10 kg Dimensions of the paper bags 600 x 300 x 180 mm to 600 x 300 x 180 mm Capacity for quantities of 5 kg: approx. 20 bags/min. 230 V / 400 V at 50 Hz Power consumption approx. 3 kW Air pressure 3 bar Air consumption approx. 390 l/min. Weight 700 kg Dimensions 2785 x 1890 x 2200 mm Controls Moeller PS4-341 Control panel MV4-150-TA1 Magazine capacity: 300 paper bags Documentation available Upmatic Computer Scale 2007 Computerized Partial Batch Weighing Machine Weighing range 1.0 to 25 kg Power capacity for quantities of 2.5 kg approx. 30 cycles/min. 230 V / 400 V at 50 Hz. 3 phases + neutral conductor Power consumption approx. 4 kW Air pressure 6 bar Air consumption approx. 2.6 litres/cycle Weight approx. 1100 kg Dimensions 2425 x 1777 x 2053 mm Control, control panel Moeller MI D ...

Prägepresse / Hot Foil Stamping Press Gierlich P 4000 Serial-No. 8296 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Key data: 1200 KW

Output power 1286 kw Voltage 400 V Frequency 50 Hz Generator Stamford , Base rating 1416 kw

clamping force: 4.000 kN injection volume: 4.000 cm³ screw diameter: -- mm platen size: 800 x 710 mm Condition: used, Specification: Rubber Injection Molding Machine - second-hand clamping unit: - Clamping force: 4000 kN - heating platen size: 800 x 710 mm - ejection device: 2-layer Injection unit: - Injection volume max.: 4,000 cm³ - Original screw 1005.10.008 B/c The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Transnorm Rising falling Incline belt conveyor with leading belt GF 25000+4000-1000-900 RA2288 Technical data: Conveyor length (NL): 29000 mm ( 25000 mm riser segment + 4000 mm forerun) frame width (NB): 1000 mm, 1100 mm with motor belt width (GuB): 900 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,2 Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW2,2 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 29000 ( 25000 + 4000 ) Nominal / outside widt ...

grinding length: 4000 mm grinding width: 1100 mm workpiece height: 1100 mm total power requirement: kW weight of the machine ca.: 21 t dimensions of the machine ca.: m Modernisierte Präzisions-Flach-und Führungsbahnschleifmaschine aus Überholungsbetrieb. Geschliffen wurden unter anderem Betten für neue KERN Drehmaschinen. -Digitalanzeigen nachgerüstet -Umbau auf Kugelrollspindeln in der Querachse -Schleifspindel für Umfangsschliff -schwenkbare Schleifspindel für Untergriffe -Originalschabbild in der Längsachse -Elektrik erneuert -Aufspannfläche 4300 x 1500 mm Bei Nutzung einer Grube können wesentlich höhere Werkstücke geschliffen werden! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Horizontal broaching machine RAWT 25 x 4000 x 500 company Hoffmann Year of manufacture 2000 Max. Operating pressure: 70bar, filling quantity hydraulic fluid: 630l, with loading gantry and sliding guide with carriage Find more here - /

Dematic conveyor system Accumulating roller 40000-500-440 RA2344 The roller conveyor shown does not correspond exactly to the illustration in the advertisement, but is the same model and is in the same condition. Only the dimensions differ. Further information Manufacturer: Dematic Type: Accumulating roller conveyor Year of construction: unknown Conveyor length (FL): 40000 mm Condition: good (used) Roller width (RB): 440 mm Nominal/outer width (NB): 500 mm Accumulation slot size: 700 mm Stowage slot control: Plug and Play, electro-pneumatic Roller pitch: 125 mm Drive types: SEW Eurodrive head drive Conveying speed: approx. 0.3 m/s Optionally available e.g: Frequency inverter for stepless speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good (used) scope of delivery: without supports and side  ...

Key data: 850 KW

2 X MTU 8V 4000 L63 Trigeneration Plants Hours: 34,000 Year: 2013 Fuel: NAT GAS Control Panel: MTU Capacity: 2 X 850kW Voltage: 400 HZ: 50 Service History: At 21,000 hours, major maintenance was performed relating to: pistons, liners, turbo overhaul, and intercooler replacement. At 42,000 hours, another maintenance is scheduled identical to the 21,000-hour one + connecting rod replacement. At 31,500 hours, the generator was overhauled with bearing replacement. The "exchange" overhaul is scheduled at 63,000 hours. STOPPED IN MARCH 2024 Scope of supply: Complete Trigeneration Plant. The trigeneration plant consists of two endothermic engines fueled by methane gas, each having the following main characteristics: • Chemical power input 2,130 kW • Electrical power 849 kW • Engine jacket heat recovery 511 kW at 78/90°C • Diathermic oil boiler from exhaust ...

1984 Messer Griesheim Statosec KSP 4000 CNC Blow Cutting Torch: Technical Condition: operational Manual: Attached Specifications: Technical data: Fuel: acetylene or propane gas Number of burners: 4 (programmable 1 burner) Sheet thickness: 8 - 200 mm. Sheet dimensions: 3000 x 6000 mm. The burners are driven by a steel belt. Space requirement: 4900 mm wide 9400 mm long 5000 mm high High speed: 6000 mm/min. Cutting speed: 10 - 1000 mm/min. Drives: DC servo motors Programme control: Burny 10 LCD plus Programmable on the machine tool and has a programming workstation. workstation. Programme: Burny 10 OEM Plus Year of manufacture: 1984. Find more here - / Contact us at -

Specifications: Maximum cutting width: 4050 mm Maximum cutting capacity steel St40: 13 mm Maximum cutting capacity stainless steel: 8 mm Cutting gap adjustment Cutting angle adjustment adjustable rip fence Dimensions (length x width x height): approx. 4600 x 2400 x 2450 mm Weight: approx. 20 tons

X-Hub 4000mm Y-Hub 900mm Z-Hub 950mm Weight: 18.500kg Headstock Range: 100 – 12,000 rpm Spindle design: SK40 Tool Stations: 66pcs. Control Type: iTNC530 Release date

Manufacturer: Butler Model: Elgamill TE 4000 Condition: Used Type of Machine: Horizontal Bed-Type Milling Machine Plate Size: 4340 × 1000 Table Size: 1000 × 1000 Control System: Siemens 810 M Spindle Hub: 480 × 360 Tool Holder Spaces: 130 Travel (X, Y, Z): 4000 × 1600 × 1000 Max Weight: 10500 kg Find more here - / Contact us at -

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm control: MSX 501 Mori Seiki work table:: table surface area: 700 x 450 mm max. table load: 350 kg number of T-slots: 4 T-slot - width: 18 mm T-slot - distance: 100 mm Main spindle: Number of revolutions: 12.000 U/min power capacity - main spindel: 18,5 / 15 / 11 kW tool taper: BT 40 max. Torque: 110,5 Nm diameter of forward milling spindle bearing: 70 feeds: rapid travel x/y/z: 20.000 mm/min feed speeds: 1 - 20.000 mm/min Tipp feed: 15 Steps / 0 - 1.260 mm/min Tool-Presetter:: Number of Toolpositions in magazine: 40 Pos. Max. mould width: 80 mm max. tool-dia with free toolbox: 125 mm max. tool length: 250 mm max. tool weight: 8 kg change-time chip to chip: 2,8 sec change-time tool to tool: 1,0 sec total power requirement: 34 kVA weight of the machine ca.: 7,2 t dimensions of the machine ca.: 2,8 x 3,0 x 2,9 m Documents: Chip conveyo ...

Specifications: Working length: 4060 mm Bending capacity: 3.0 mm Control with bending simulation: MULTIBEND 901 grafik 2D Automatic adjustment of the bending angle depending on material thickness Bending angle adjustment: 0 – 180° Backgauge motorized adjustable: 10 -1500 mm Max. opening bending beam: 300 mm Bending and lower beam adjustment range : 80 mm Motor power: 7.5 kW Dimensions (length x width x height): approx. 5500 x 4050 x 2600 mm Weight: approx. 6.8 tons

Specifications: hydr. Four Roll Round Bending Machine Working width: 4000 mm Max. bending power: 10.0 mm Max. bend: 8.0 mm Diameter upper roller: 305 mm Diameter of side lower rollers: 305 mm Diameter middle lower roller: 265 mm Conical bending device by inclined position of the two side rollers Hardened rollers Hydraulic Safety Chucks Lateral bending aid on the right side Mobile control panel Dimensions (length x width x height): approx. 7300 x 1600 x 1600 mm Net weight: approx. 17 tons

Working area X 4000 mm, Y 2000 mm, Z 115 mm Weight 16000 kg parameters L x W x H: approx: 9800 mm x 5300 mm x 2000 mm Siemens Sinumerik 840 D type of laser TruFlow 4000 W max thickness 20 mm 4000 mm x 1250 mm feed 3400 mm Dismantling, loading, crane is not in price of machine - plus price per all services NC: 88631 - Resonator/HD pump 1: 87603 - Beam on/pump 2: 53667