128,237 used machines on RESALE, but how to find them? Machine Search
Upright stack delivery with pressing unit; working condition
PLC – controlled (touch screen) multifunctional press with multiple functions Firstly, our multi-function press is a vacuum press, three-dimensional film deformation with or without membrane. Vacuum chamber size 2,340 x 1,340 mm Maximum workpiece height 60 mm Equipped with a vacuum diaphragm at the top and bottom. The press is equipped with a powerful vacuum system and a vacuum tank, which guarantees a constant and uniform supply of vacuum to the working chamber. Drive power vacuum pump 4.5 kW Vacuum tank volume 500 liters Vacuum pump flow rate 100 m³/hour Two pieces of air heat exchanger, each with a heating capacity of 3 kW. Secondly, our multi-function press is a hydraulic plate press with ten pieces of press cylinder and 200 tons pressing force – Suitable for different applications - - Cold and hot pressing - Single-sided and double-sided veneer pressing ...
Manufacturer: Busch Type: Mink MI 1502 BP Engine: 18.5 KW ; DS 400V Status: Used, partial performance: 6 months Volume flow: 500 m3/h compression pressure: +1.2 bar Accessory: additional suction filter (changed) ; Operating manual delivery time: approx. 1-2 Where.; ready for use
wire diameter: 3,0 - 5,5 mm nail length: 15 - 80 mm output: 150/300 St./min. -for steel pins-; very good
DENER SERVOBRAKE 4015 CNC press brake which was built in Turkey in 2016, guarantees the highest quality of workpiece machining with simultaneous low energy consumption and low operating costs. Distinguished by its sturdy construction and state-of-the-art technology, the machine is equipped with a powerful electric drive based on servomotors and belts with a multi-belt system. Replacing the standard hydraulic system with an electric drive makes the SERVOBRAKE DENER DDM 4015 servo press brake much easier to maintain and faster than conventional hydraulic presses. This is possible because the machine is free of hydraulic oil, filters, seals and other hydraulic components. The electric drive also eliminates the occurrence of the so-called deflection arrow and its compensation through even force distribution on the slider. The DENER servo electric press brake is also equipped with an in ...
Rotary tablet press Killian, model T300-32 EU-B Year of construction: 1996 One pair presser rollers respectively for pre-pressure and main pressure. Designed for high press speeds; operated mainly from the front using the hour hand wheels, the controls and via the terminal. Excellent, in full working condition. Technical Information: - Height with hopper: 1852mm (height without hopper: 1692mm) - Machine weight: 1950kg - Max tablet diameter: 16mm - Max fill depth: 16mm - Max output: 240,000 tablets per hour - Max operating pressure 80kN - B type machine – EUR B - 32 stations - Fill System - force feeder Electrical upgrade in 2010 – new PLC and touch screen HMI.
Pelessierpresse Hanau, for pressing wagon wheels on axle, gemaess pictures
Used Goodnature cold press, model X-1. Year of production 2014. Capacity up to 1,000 bottles per day. Power supply 220V 50Hz X-1 is a professional press capable of producing a thousand bottles of cold-pressed juice per day. X-1 is used by successful cold-pressed juice producers, nut milk producers and cider producers. The machine is almost unused. She worked several times. The bags have been the same since new - they show minimal wear. It's like brand new. Everything works fine without any problems. Perfect machine for small juice producers, large grocery stores or juice shops. It can also work in the production of nut milk or cider. The machine is very easy to clean and maintain. Comes with 3 different shredding discs and 2 bags. Original user manual. The juice is squeezed gently but firmly. The operator sets the pressure and controls the time. It can work fast with lower effi ...
Table 1750 x 920 mm, fixed stroke 101 mm, see pictures and description,; All right
Printing capacity max. 25 t, table 600 x 600 mm, stroke max. 350 mm
Festo offers a pressure regulator valve battery with switch-on valve, pressure gauges, silencer, mounting brackets, angled 3/8" push-in fitting outputs and a through-ground, angled 3/8" push-in fitting input. The complete battery is in absolute top condition, it is an unused part of the stock. The following is pre-screwed ready for use: - 528988 Pressure Control Valve Battery LRB-3/8-D-7-0-K4-MIDI - 162809 Switch-on valve HE-3/8-D-MIDI - 4 x 359873 pressure gauge 0-10bar MA-50-10-1/4 - 159593 HFOE-D-MIDI/MAXI mounting bracket - 165004 Silencer UC-1/4 - 4 angled 3/8" push-in fittings on the outputs - Through-ground, angled 3/8" input
Hydr. Re-entry press, pressure line max. 50 t, table 600 x 550 mm >>
Hydraulic pressure filter, 200bar, 34P-0014, Parker, used - overhauled Special price (The cheapest current new price in the market is more mthan € 3000 excl. VAT) If you have a VAT number, we will gladly issue you an invoice without VAT. Used part - overhauled! The part was purchased from a company's spare parts warehouse, has been overhauled, reconditioned and is fully functional. Manufacturer Type designation: 34P-0014 Max. operating pressure 200 bar 565L/min Micron Rating 20Q G1 1/4" incl. new filter element Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude ...
Pressure: 65 tons -Stroke: 140 mm -Table size: 720 x 600 mm -Plunger surface: 500 x 300 mm -Tappet adjustment: 80 mm -Strokes: 20-40 per min. -. Weight: 6000 kg -Dimensions (L x W x H): height 3.1 m -Clamping hole ø 60 x 80 mm More info on request
Hydraulic pressure filter, 200bar, 34P-0016, Parker, used - overhauled Special price (The cheapest current new price in the market is more mthan € 3000 excl. VAT) If you have a VAT number, we will gladly issue you an invoice without VAT. Used part - overhauled! The part was purchased from a company's spare parts warehouse, has been overhauled, reconditioned and is fully functional. Manufacturer Type designation: 34P-0016 Max. operating pressure 200 bar 565L/min Micron Rating 20Q G1 1/4" incl. new filter element Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclud ...
Tech. Data Nominal press force 1000 kN at maximum stroke adjustment - commute 6.5 mm 1250 kN at maximum stroke adjustment - commute 3.5 mm Strokes with endurance 125/83/63 Hube/min Usable stroke rate 50 50 38 / min. Throat depth 320 mm, clamp 380 mm Stroke adjustment 10-120 mm, Stosselverstellung 80 mm Stosselflaeche 800 x 320 mm, recording journal 50 / 85 Tabletop table top hole, 900 x 630 mm 230 mm, Durchfalloch in the table 300 / 400 x 250 mm Drive - 7,5 / 5,5 kW Bulk 1350 x 2080 x 2780 mm, Btto 8900 kg
PLASOMAT PMS 63 CP eccentric press was manufactured in Poland in 2004. In order to meet all production requirements, the machine features a large area slider with the possibility of adjusting the height and number of strokes in the control cabinet. In addition, a stable, deformation-resistant monolithic structure combined with a high pressing force of 63 tonnes ensures the highest accuracy and precision in machining. All this makes the PMS 63 CP press the ideal choice for both small batch and high volume production. The offer includes additional equipment, consisting of among others 8 anti-vibration pads and an intermediate table. Technical specifications of the PLASOMAT PMS 63 CP press - maximum press force: 63 t (630 kN) - work table dimensions (L x W): 800 x 560 mm - number of slider strokes: 65-85/min - maximum slider stroke: 110 mm - minimum slider stroke: 8 mm - slider adj ...
HENKE UNI 2000-6000 Built in 1995 Format: 400x400 2-speed 400x600 2-speed 1. Distributor for attachment 2. Doser 3. Settling device 4. Chain conveyor 5. Roller conveyor 6. Plate destacker 7. Cleaning device 8. Plate oiler 9. Pawl conveyor 10. Stacking device 11. Plate removal device with rotating device 12. Control for UNI 2000 13. Belt conveyor with lifting 14. Belt conveyor 15. Plate Displays 16. Carrier chain conveyor 17. Push-off device with roller table 18. Autom. Control for packaging 19. Fader Puller HENKE UNI 2000-6000 Year of production: 1995 Sizes: 400x400 2x 400x600 2x 1. First layer distributor 2. Dozer 3. Take-off device 4. Chain conveyer 5. Roll conveyer 6. Destacking device 7. Cleaning device 8. Oiling device 9. Slap converter 10. Stacking device with rotating device 11. Arm with rotating device 12. Control for UNI 2000 1 ...
various hand spindle presses small More: Foot pendulum press Jantsch
Printing capacity max. 300 t, table 1500 x 1000 mm, stroke max. 500 mm
automatic baler Manufacturer: PAAL Type: KONTI 275 C Year of construction 1996 specifications: Press force: 65 t Specific pressing force: 7.88 kg/cm² Channel format: 750 x 1,100 mm Bale weight: 450 - 600 kg, depending on material and bale length Filling opening: 1,550 x 1,020 mm Drive power: 45 + 30 kW Throughput: 380 m³/h Pressing capacity: - approx. 13.0 t/h at department store (35 kg/m³ bulk density) - approx. 23.0 t/h for mixed paper (60 kg/m³ bulk density) - approx. 35.0 t/h for collected goods (100 kg/m³ bulk density) Setting: 4-fold vertical Machine weight: approx. 21.0 t Optionally with feeding belt according to photos
Cordmasspress built 1970 diverse thorns All data without information
automatic baler Manufacturer: PAAL Type: KONTI 275 D Year of construction: 2002 Operating hours: approx. 30,000 hours Main parts of the press: 1 automatic channel press 1 automatic lacing 1 hydraulic system 1 electrical control specifications: Press force: 75 t at 300 bar Specific pressing force: 9.09 kg/cm² Duct cross-section (h x w): 750 x 1,100 mm Filling opening: 1,020 x 1,550mm Number of binding wires: 4 pieces vertical Drive power: 1 x 75 kW Throughput: up to approx. 350 m³/h Hydraulic oil tank volume: 2,200 l Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Other features: - Automatic cutting edge release - Large digit display for bale length and fault indication
Qty. 1 Second-hand die cutter with flexo printing press Mfc.: M&M Mediterránea de Maquinaria Type: WRC 98 1150-1600/DISTENCO Built: 1999 Flexo printing press with 3 colours Capacity: 50,000 boxes in 1 shift Input material: cardboard of max. dimensions: 1,150 mm x 1,600 mm Output material: boxes (for pizza) Included in the scope: approximately 15 tools for different sizes of boxes New electronics The complete die cutter with flexo printer will require approximately loading on 2 trucks. The box production process is as follows: Ready-made cardboard formats are inserted into the machine, the machine prints up to 3 colours, cuts the box and sends it on with a conveyor and stacks it.
Capacity , ton: 800 Stroke, mm: 320 Strokes/min: 20 Shut height, mm: 900 Bed to ram adjustment stroke, mm: 320 Bed dimensions, mm: 2500x1600 Main drive motor power, kW: 75 Overall dimensions, mm: 4220x3500x8356 Weight, ton: 96,6
Te Coop: Danfoss Druk druk transmitter MBS 3000 0-6 bar
Te Coop: Labom Druk transmitter CE 1110 Druk 0-25 bar
Frame press Hess economic hydraulic 3600 x 2250 mm L x W x H: 400 x 100 x 270 cm Weight approx. 1100 kg year 1987 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Laboratory Heating Press EHSP20H – Used Demonstration Machine Table press / electric screw press with pressing pressure 20 KN (2 tons) With heating device up to 200 °C from above and below. Press drive with screw jack gear, reduction ratio 1 : 12, spindle diameter 32 mm, Pitch 6 mm, pressing area approx. 100 150 mm, clear height and stroke approx. 300 mm. Geared motor 0.37 KW, 1,390 rpm, 4-pole, with spur gear i = 1 : 5, Speed 150 mm / min. Max. dynamic load 20 kN. With reversing control, control box and motor protection plug. Sturdy press frame made of steel. Undertable made of high-quality aluminium profiles 4545 mm, table surface 600600 mm, Table top made of multiplex board. Total weight approx. 100 kg. The table press has a pressing pressure of 20 kN (dynamic load). Typical applications are pressing work with exact lining. Suitable for pressing bonding, embo ...
Maximum force ton-force 400 Slider stroke length mm 250 Slider stroke length to lower position mm 12 Slider strokes per minute 25 Number of single turn-on 19 Maximum distance between table and slider (in lower position of slider) mm 510 Adjustment mm 160 The sizes of a under-forginig plate mm 1000 Table overall dimensions: mm ·from front to rear 1000 ·from left to right 1000 The sizes of an aperture in a table mm 630 Slider overall dimensions mm 800 x 800 window dimensions in cheeks mm 600 Total power of electric motors kW 43,3 Press overall dimensions mm ·length 3470 ·width 3140 ·height 5940 Press weight without hydropneumatic pillow kg 31 400
Te Koop: Samson for Type: 3804 Druk: 0.016 - 0.4 bar maximum druk 0.76 bar. Prijs is incl. BTW
Hydraulic press brake. Working length: 3.000mm. Pressing force: 200Tn. Back gauge.
Laboratory heating press REITZ EHSP5H – used demonstration machine Heating press with pressing pressure 5 KN (0.5 tons) With heating device up to 200 °C from above and below. - Electric screw press press press force 5 KN (0.5 to) - Screw jack with spindle 20 mm, pitch 5 mm - Gear reduction ratio 1 : 10, 0.5 mm spindle travel per revolution - Clear width approx. 60 mm - Pressing area 100150mm - Heating device with temperature control, 2 heating plates 100 x 150 mm - With TECO electric motor 0.18 KW - With reversing contactor control (up – down buttons) and emergency stop - Motor protection plug against overload, with main switch - Machine table made of aluminum profiles and multiplex plate 700 700 mm - Total weight approx. 100 kg . Suitable for foil bonding and embossing. Due to self-locking of the spindle, long holding time with constant pressure. The scr ...
High pressure cleaner, Cold water high pressure cleaner Manufacturer: Karcher Type: HD 700 Year of construction 1998 maximum pressure: 140 bar 9.5 L / min Drive: electric With hose package All information without guarantee
BEYELER PR6 ROBOT 60 X 2550 MM CNC press brake was built in 2001 in Germany. This extremely powerful and reliable machine is used for precision bending of workpieces with a maximum length of 2550 mm. The sturdy construction in combination with a press force of 60 tonnes and a perfectly optimised CNC control makes the machine ideal for a wide variety of applications in unit and series production. The BEYELER PR6 Robot press brake weighs 7200 kg. Technical specifications of the BEYELER PR6 ROBOT 60 X 2550 MM press brake - CNC control - press force: 60 t (600 kN) - maximum bending length: 2550 mm - bending speed: 1-10 mm/s - return speed: 200 mm/s - slider stroke: 265 mm - maximum response time: 110 ms - minimum safety distance: 350 mm - motor power: 5.5 kW - maximum air pressure: 8 bar - power supply: 3x 400 V; 50 Hz - dimensions (L x W x H): 3000 x 2100 x 2700 mm - weight ...
ULTRAPRAS UPV100TT SPECIAL hydraulic press built in 2022 Poland is the perfect choice for a range of demanding cold metal forming operations. This highly efficient and versatile machine can perform such operations as precision bending, profiling, flattening, bending, hole punching and stamping. Inside the robust design, there is a power unit-powered hydraulic piston with a diameter of 220 mm, which performs all these machining processes with a high press force of 100 tonnes. In addition, the entire working area is protected by light curtains, thanks to which the UltraPras four-column press also offers a high level of operational safety. During its service life, the machine has operated for just 595 hours and completed a total of 37042 work cycles. The UPV 100 TT SPECJAL 100t hydraulic press weighs 6500 kg. Technical specifications of the ULTRAPRAS UPV100TT SPECIAL press - maximum pre ...
used
It is a special hydraulic chip press designed to achieve the best compaction quality with maximum flexibility in application. It is designed for the recycling and compaction of metal chips (which are shredded if necessary) from machining by converting them into cylindrical briquettes. When it comes to disposing of metal chips, the Styrotec briquetting press saves a lot of money and increases profits by turning waste into a resource. It can be installed both indoors and outdoors. Your benefit: - Volume reduction of up to 90%, which gives you more free space in the warehouse - Higher sales price leads to a quick return on investment - Reduction of handling and transport costs by up to 80% (in-house and during disposal) - Reduction of recycling costs of up to 90% through better recyclability - Reduction of environmental impact Production (general): 20-50 kg/h Briquette diamet ...
Description of the chip press: Powerful metal chip press with chip shredder for long turnings. The area of application is the processing of large quantities of milled and turning chips. Materials: aluminum, steel, cast iron Drip pan as oil tank Geared motor for optimal agitator operation Hydraulic Compression Cylinder Hydraulic press cylinder with two coaxial sections Diameter of briquettes 60 mm Automatic briquette length adjustment with displacement transducers Inductive Proximity Sensors Pre-compaction cylinder in conjunction with special compression hydraulic cylinder that compacts the material in the bushing-bulkhead unit Briquette ejection system, consisting of a compression chamber and a bulkhead with special anti-wear treatment Highly efficient closed-circuit oil cooling system consisting of an air/oil heat exchanger Hydraulic system with B ...
ULTRAPRAS WKR70H hydraulic press built in 2021 by the Polish company SAKOMET is designed for even the most demanding cold metal forming operations. The operations, such as precise cutting, stamping, punching and extruding of workpieces, are performed with a force of 16 tonnes using a hydraulic cylinder with a diameter of 100 mm. Induction limiters additionally allow adjustment of the piston advance and retraction limits, making the machine adaptable to the working range of various tools. In turn, centrally beneath the piston is a large cross-cut work table with a 90mm diameter bore. The UltraPras WKR 70H 16t hydraulic press weighs 420 kg. Technical specifications of the ULTRAPRAS WKR70H press - press force: 16 t - piston stroke: 70 mm - piston diameter: 100 mm - maximum working speed: 9.8 mm/s - minimum working speed: 2 mm/s - return speed: 20 mm/s - work table dimensions (L x ...
maximum number of results exceeded
please refine your search
