We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,376 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
used
unknow A9020411 (12-14)-
used
Operator Panel
used
unknow GE.570205.0002.00, part of the set-
used
Main Rack
used
BARCO HULPFUNCTIE 16 DIG OUTP
used
BARCO FLOPamp;KBRD INTF MNC95
used
Type: 62416, rotary wheel valve with pre-valve flat slider, drive via spur gear motor with 3 kW / 42 rpm. Little ran.
used
Type: 9.3-456, Y.O.M.: 1991, inlet: 400 mm x 400 mm, overhauled, without motor.
used
Built: 1991, inlet: 400 mm x 400 mm opening, overhauled, without drive.
used
Inlet: 380 mm x 480 mm, wheel with upstream slide valve, driven by cylindrical gear drive with 3 kW / 42 RPM, only few funning hours.
used
Cat.-No. 13-0290 in very good condition Operating pressure test at 2.0 bar Test medium: water at 22 ° C at 1 bar pressure Capacity: 2400 l / h Engine power: 2.20 kW, 50 Hz Connections: inlet and discharge pressure DN 65, thread according to DIN 32676 -can be converted against extra charge With frequency inverter infinitely variable (surcharge) on request Dimensions and weight: Length: 850 mm width: 380 mm height: 770 mm weight: 125 kg Note: 100% pump all prices apply ex works plus gesetzl.MwSt tested with warranty. Delivery: from 97753 Karlstadt Karlsburg freight expenses: reserved to standard equipment sale
used
Workspace tip height 102 mm centre distance - with normal headstock with 450 mm - reduction gear headstock 375 mm - over the cheek 200 mm - over the slide 120 mm spindle poles spindle nose for collets type Schaublin W25 spindle bore 25 mm collets passage 20 mm reduction ratio of 1:5 Raedergetriebes cheek height x width x length 168 x 130 x 1000 mm cheek from cast iron, trapezoidal profile as lathe 102 N and dovetail, hardened and ground. Sledge greatest way on the cheek width 400 mm runner - length 90 mm top runner above 80 194 mm way manual adjustment 20 mm shank of tools 12 x 12 mm cross slide width length 94 300 mm way manual adjustment 100 mm bed slide length of leadership on the cheek 250 mm screw lead screw for longitudinal turning and threading, Ø 40 mm screw hardened, Ground thread, slope 4 mm speed range RPM 270 3000 rpm turning 0.02 0.3 mm / Rev. Tapping largest slope ...
used
132 kW, max. 7,5 bar, 24,2 m3/min, New srew.
used
Stainless steel pumps, Hilge, Fristam, various versions and sizes
used
Stainless steel pumps, Hilge, Fristam, various versions and sizes, various models, partly new
used
160 kW, max. 7,5 bar, 27,4 m3/min, year 1998.
used
132 kW, max. 11 bar, 20,3 m3/min. Air end new in 2001 and has 38000 working hours.
used
55,0 kW, max. 10 bar, 7,4 m3/min, YOM 1991
used
200,0 kW, max. 10,00 bar, 30,00 m3/min. Oil-free, water cooled. Excellent condition.
used
200,0 kW, max. 7,5 bar, 36,18 m3/min. Condition like new. 2 pieces available.
used
90,0 kW, max. 8,0 bar, 15,12 m3/min. With built-in compressed-air dryer refrigerant R 404a. Oil, oil filter, air filter and oil separator are new.
used
Rotary screw air compressor Atlas Copco 200 kW, max. 20 bar, 21,66 m3/min. New elektronikon controller at 20000 total hours. Real working hours 21409
used
110,0 kW, max. 8,5 bar, 18,72 m3/min.
used
75 kW, max. 10,0 bar, 10,35 m3/min.
used
250 kW, max. 10,0 bar, 35,88 m3/min.
used
160,0 kW, max. 7,50 bar, 27,40 m3/min, oil-free, air cooled.
used
Rotary Screw air compressor, 75.00 kW, 3 x GA 808 and 1 x GA 810
used
75,0 kW, max. 10,0 bar, 14,02 m3/min. With frequency inverter. Volume flow 14,02 m3/min at 7 bar.
used
1 of second-hand but unused! Thiele rotary placer (coupon feeder). Type 400. New 1985. Maximum speed 400 coupons/minute. Min/max coupon size: 38x38 - 152x152 mm. Size adjustable. Wired for 115V/60Hz.
used
90,0 kW, 10,0 bar, 15,0 m3/min. With frequency inverter. Volume flow 2,4 - 15 m3/min at 7,5 bar.
used
110 kW, max. 12,0 bar, 16,10 m3/min. Volume flow 16,1 m3/min at 10 bar.
used
90,0 kW, 8,0 bar, 12,78 m3/min. oil-free, air cooled.
used
75,0 kW, max. 13,0 bar, 13,80 m3/min. With built-in frequency inverter. Volume flow 2,0 - 13,8 m3/min.
used
75,0 kW, max. 8,50 bar, 12,28 m3/min. With built-in frequency inverter. Volume flow 2,89 - 12,28 m3/min.
used
45,0 kW, max. 10,0 bar, 6,10 m3/min. With frequency inverter. Volume flow 1,5 - 6,1 m3/min. New air end in 2008 at 51000 working hours.
used
45,0 kW, max. 7,50 bar, 6,06 m3/min. Oil-free, air cooled.
used
75,0 kW, max. 7,50 bar, 13,80 m3/min. Condition like new.
used
132,0 kW, max. 9,0 bar, 22,90 m3/min. With energy recovery. Condition like new.
used
160 kW, max. 7,50 bar, 30,30 m3/min. With built-in compressed-air dryer.
used
315 kW, max. 10,0 bar, 41,20 m3/min. Oil-free, water cooled. Voltage 3300V, 3ph, 50 Hz. New controller Elektronikon Mk4.
used
160,0 kW, max. 7,50 bar, 22,70 m3/min. Oil-free, air cooled
used
75,0 kW, max. 7,50 bar, 12,90 m3/min.
used
132 kW, max. 10 bar, 18,3 m3/min. Oil-free, water cooled
used
160 kW, max. 10 bar, 25,10 m3/min.
used
75 kW, max. 10 bar, 11 m3/min. 2 pieces available.
used
90 kW, max. 8 bar, 14,98 m3/min.
used
400 kW, max. 8 bar, 61,32 m3/min. Oil-free, water cooled. Air ends (screws) have 16000 working hours.
used
160 kW, max. 7,5 bar, 26,88 m3/min.
used
75 kW, max. 8,60 bar, 11,20 m3/min. Oil-free, air cooled.