rotary die cutter used for sale

Swivel drive, pneumatic cylinder, wing drive, swivel module -Type: DMSI - Angle measuring system: integrated -Swivel angle: 0° - 270° -Number: 1x available -Price: per piece -Dimensions: 110/110/H270 mm -Weight: 9 kg

Rotary kiln, gas oven, pyrolysis oven, thermolyse furnace used Manufacture: REIDHAMMER Type: DRA 10/150-G-650; DRA 8/100-G-650 Built in 2015 Temperature max 650° C Natural gas Furnace chamber approx. 8 x 2 x 2.2 m Filling volume 1.77; 0.63 m3 Dimensions total approx.: 17 x 2 x 3 m

Rotary axis drive, drive, limit switch -Manufacturer: Telemecanique -Type: ZCE01 -Quantity: 5 available Price: per piece -Minimum order quantity: complete -Weight: 0.05 kg

Manufacturer Düchting Type centrifugal pump LHK 125x5 Unused / Refurbished Flow rate 180 m3/h Head 150m Step number 5 Weight approx. 550kg Special price

Rotary unit, rotary device, turning table, conveyor belt, container rotary device, welding rotary device, welding device -Drive motor: 0.15/0.60 kW -Speed: 15/64 rpm -sealed: slewing ring -Device is: pneumatically tiltable -Dimensions: 2520/800/H380 mm -Weight: 524 kg

Incremental rotary encoder with solid shaft -Type: ZI 58 -Voltage: +11-27 VDC -Weight: 0.5 kg

table length: 590 mm table width: 590 mm table load: 200 Kg table turning speeds: 0,23 - 2,3 U/min table height: 650 mm total power requirement: 0,55 kW weight of the machine ca.: 600 Kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1000 mm table width: 1000 mm table load: 1,5 t flange diameter: 700 mm turning speed: max. 0,04 U/min weight of the machine ca.: 1,2 t dimensions of machine L x W x H: 1,60 x 2,0 x 1,50 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 450 mm y-travel: 400 mm z-travel: 320 mm tool taper: HSK 63 spindle turning speed range: 0 - 10000 U/min rapid traverse: 30 m/min System for processing fittings, valve housings, etc. consisting of 1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 1-0 / 1-V, YOM 2010, with 2 pcs. 3-axis machining modules, each with 8-pos. tool turret, travel paths module 1: X1 / Y1 / Z1 = 450/400/320 mm, travel paths module 2: X2 / Y2 / Z2 = 450/400/320 mm, tool fixture HSK 63, rotary table with 2 integrated workpiece carriers á 400 mmø (B axis per workpiece carrier 360 x 1 °), coolant through spindle Acc.: chip conveyor, coolant device connected by ABB handling robot with 1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 2-0 / 1-V, YOM 2003, with 3 pcs. 3-axis machining modules, each with 8-po ...

table diameter: 450 mm table load: waagerecht 300 Kg table load: senkrecht 150 Kg table turning speeds: 0,2- 2 U/min voltage: 230 V / 50 Hz total power requirement: 0,55 kW weight of the machine ca.: 80 KG dimensions of the machine ca.: 0,65 x 0,5 x 1,0 m • unused stock machine • manual tilt adjustment • Start-Stop by foot switch • with CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Metering rotary valve, rotary valve, metering valve, rotary valve for screw conveyor, screw conveyor, screw conveyor, conveyor technology, screw conveyor -Impeller: for cellular wheel sluice, 8-wing -Cell wheel: Ø 200 x 220 mm, dimensions see photos -Total dimensions: 625/200/H200 mm -Weight: 12.1 kg

table diameter: 1000 mm table load: 0,6 t swivelling range: 0 - 90 Grad turning speeds: 0,1 - 1,25 U/min max. torque on the faceplate: 900 Nm table pass: 200 mm welding current: 500 Ampere total power requirement: 0,37 + 0,75 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Absolute encoder, encoder, encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, resolver, incremental encoder -Manufacturer: Heidenhain, incremental rotary encoder encoder in original packaging -Type: ROD 426 -Art.No.: 376846-L2 -Dimensions of box: 180/130/H90 mm -Weight: 0.4 kg

Absolute encoder, encoder, encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, resolver, rotary pulse encoder, tacho generator -Manufacturer: Noris, rotary encoder tachogenerator -Type: GE121 -Speed: 1500 rpm -Dimensions of box: 210/115/H100 mm -Weight: 1.6 kg

Absolute encoder, encoder, encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, resolver, rotary encoder -Manufacturer: TR Electronic, Incremental Encoder -Type: E-58-A -Shaft: Ø 6 x 12 mm -Quantity: 1x encoder available -Dimension: 85/57/H70 mm -Weight: 0.3 kg

Absolute encoder, encoder, encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, resolver, rotary encoder -Manufacturer: TR Electronic, rotary encoder encoder -Type: IE58A -Art.No: 219-00074 -Shaft: Ø 6 x 12 mm -Dimension: 85/58/H70 mm -Weight: 0.4 kg

Absolute encoder, encoder, encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, resolver, rotary encoder -Manufacturer: IVO, incremental encoder -Type: GI 355.060C215 -Voltage: 10-30V -Shaft: Ø 10 x 20 mm -Quantity: 1x encoder available -Dimension: Ø 58/ 92 mm -Weight: 0.2 kg

Absolute encoder, encoder, encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, resolver, incremental encoder -Manufacturer: Heidenhain, incremental encoder encoder OVP -Type: ROD 426 -Art.No.: 295438-1C -Shaft: Ø 6 x 10 mm -Dimensions of box: 180/130/H90 mm -Weight: 0.5 kg

Absolute encoder, encoder, encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, resolver, incremental encoder -Manufacturer: Point, Incremental Rotary Encoder -Type: EI281B500ZE5LP/LD1 -Hollow shaft: Ø 15 x 26 mm -Dimension: 80/61/H48 mm -Weight: 0.3 kg

Printing plate deal Grafoteam TAT 48; good condition; we overhaul before delivery; Max. Plate format 1630x1300mm, min.510x400mm; Interface connection possible. Turn around table Grafoteam TAT 48; good condition; will be rebuilt before shipping; max.plate size 1630x1300mm, min.510x400mm; possible to connect with other machine.

USED KORSCH MODELO PH 230 ROTARY PRESS REF.: E6431

Specifications: - max. Load capacity 10000 kg - Flat discs 1400 x 1400 mm - Flat disc hydr. swivel 0 - 90 / 135 ° - Rotary movement infinitely variable 0.05 - 1.2 rpm - Right - + left-hand running controllable - Welding current transmission approx. 500 A - Drive 400 V - Table height at horiz. Position approx. 2500 mm - E. handheld remote button - Space requirement approx. W 2000 x H 2500 x D 2700 mm - Weight approx. 5200 kg

Specifications: - max. Load capacity 750 kg - Face disc diameter 750 mm - Hollow continuous spindle 65 mm - Face disc motorically swivel 0 - 90 ° - Rotational movement electr. infinitely variable 0.05 - 2.0 m/min - Right - + Left - Run - E. – Foot switch + hand remote control - Welding current transmission approx. 500 A - Drive 400 V - Table height with horizontal position 1050 mm - 3. Cheek lining - Space requirement approx. W 1600 x H 1050 x D 1600 mm - Weight approx. 400 kg

Absolute encoder, encoder, encoders, absolute encoders, absolute encoders, function encoders, resolvers, incremental encoders -Manufacturer: Heidenhain, Incremental Encoder -Type: ROD 620 -Version: 77622 004 -Shaft: Ø 6 x 10 mm -Dimensions: 90/80/H70 mm -Weight: 0.4 kg

Part-turn actuator, pneumatic cylinder, rotary vane actuator, swivel module -Manufacturer: Rotech, TCR module for rotary actuator unused -Type: TCR3MVAZ -Number: 2x module available -Price: per piece -Dimensions: 160/70/H105 mm -Weight: 0.4 kg/piece

Machine vice base plate, clamping plate, vise plate, rotary table -Rotary table: Turntable for vise -T- Round groove: 20 mm, dimensions see photos -Degree display -Dimensions: 350/320/H45 mm -Weight: 20 kg

Rotary feedthrough, rotary valve, rotary distributor -for hydraulics -Number: 2x large opening -Number: 8x control cable, smaller bore -Dimensions: 350 x 400 mm -Weight: 45 kg

Specifications: - Load capacity 100 kg - Face disc diameter 400 mm - Faceplate infinitely tiltable - Table height with horizontal position approx. 470 mm - Rotational movement electr. infinitely variable 0 - 2.5 m/min - Welding current transmission 400 A - Drive 400 V - Right - Left rotation - Foot switch with foot roller controller for speed regulation - Ground cable - Space requirement approx. W 700 x H 700 x D 600 mm - Weight approx. 100 kg

REF-2357 WORTHINGTON CREYSSENSAC ROTARY-SCREW AIR COMPRESSOR Rotary-screw air compressor. Manufacturer: Worthington Creyssensac. Brand: ROLLAIR. Model: ROLLAIR 75. Compressor: - Rated power: 55kW/75HP - Refrigerated air volume: 9,000m3/h - Sound level: ± 70dB - Weight: ± 1,400kg - Compressed air outlet Ø: 2” - Operating pressure: 12.5 bar Compressor motor: - Manufacturer: LEROY SOMER - Model: AP180LGU-T - Power: 55kW/75HP - 2,945 Rpm - 400V/100A Complete with instruction manual.

Incremental rotary encoder with solid shaft -Type: 42 6 Factory no.: 0584 -Impulses: 113 U -Dimensions: 115 Ø 95 mm -Weight: 2 kg

Absolute rotary encoder, incremental rotary encoder with solid shaft -Type: BVS58N-011AVR0NN-0013 -Factory no.: 113845 -No.: 0425903 -Quantity: 3 available -Price: per package -Weight: 0.5 kg

Absolute encoder, incremental encoder with solid shaft -Type: 127 BA Series: 71 Price: per piece Quantity: 5 available -Weight: 0.5 kg

Rotary actuator for air flaps, air flap rotary actuator -Hollow shaft mount: Ø 32 mm -230 VAC -Protection class: IP 54 -20 Nm 90° -Weight: 1.7 kg

Rotary actuator for air flaps, air flap rotary actuator -Hollow shaft mounting: approx. Ø 32 mm -24 VAC -Protection class: IP 54 -20 Nm 90° Price: per piece Quantity: 1 available -Weight: 1.8 kg

Rontech TR A4 rotary feeder for BVM; State as is; suitable for BVM packaging machines; Format max. 420x297mm, min.120x100mm; Product thickness up to 5mm; Capacity up to 200 products/min. Rotation feeder Rontech TR A4 for BVM; condition as is; used for BVM packaging machines; size max.420x297mm, min.120x100mm; thiknes up to 5mm; speed up to 200 products/min.

Seitz Enzinger Noll rotary vacuum filter with 15 m2 filter area. Filter run to the last, because of the purchase of a larger machine.

The Kaeser ASV60 is a high-quality rotary screw vacuum pump designed for efficient and reliable vacuum generation in industrial applications. Engineered for continuous operation, this unit delivers stable vacuum performance with low energy consumption and minimal maintenance requirements. Built with robust components and advanced screw technology, the ASV60 ensures long service life and dependable operation even in demanding production environments. Key Features: Rotary screw vacuum pump technology Designed for continuous industrial operation High efficiency and energy-saving performance Low noise and vibration levels Reliable and low-maintenance design Integrated control system

NC Rotary Table Brand FIBRO, type 11.13.6.15.5.11.11.4.0120 T2 Diameter 800 mm Height: 240mm The indicated retail price is net.

On offer is an Aerzen rotary lobe blower from 2022, used in very good condition. Technical data: Manufacturer: Aerzener Maschinenfabrik GmbH Description: Rotary lobe blower Model No.: GM10S Year of Make: 2022 Suction pressure: 1.013 bar Final pressure: 1,613 bar Nominal motor power: 15 kW Weight: 451 kg There are 2 devices, the price is per device. The blower is currently at our customer's site in Pasewalk and is being sold due to restructuring. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are net prices in EURO ex works. Since these are used assets, we sell them without guarantee or warranty as well as the right to take back. The offers are subject to change, subject to errors and subject to any prior sale. Our t ...

CompAir L90-7.5A rotary screw compressor was built in 2016 in Germany by Gardner Denver Deutschland GmbH. The device is designed to produce compressed air used in many industries as a power source for machines and technological processes. The CompAir L90-7.5A compresses air to the required pressure by means of an advanced compression system based on two rotating screws. This system provides the highest quality compressed air at low rotational speed to help minimise energy consumption and achieve maximum performance of the unit. The integrated oil filter and oil regulation valve reduce the number of external components, simplifying maintenance and reducing operating costs. The innovative design of the fail-safe shaft seal, in turn, increases operational reliability and minimises downtime of the machine. The CompAir L90 screw compressor is operated via a DELCOS XL controller with touchs ...

AFT Rotary slicer Stainless, 12 station rotary slicer, suitable for tomatoes, eggs and other fruits, mobile, 3Ph

Rotary unit, rotary device, turning table, turning unit -Roller conveyor length: 850 mm -Rollers: Ø 80-120 mm -Roller spacing: 190 mm -Roller width: 220 mm

Elmo Rietschle oil-lubricated rotary vane vacuum pump complete with 15 kW/50Hz 3~motor, 700 m³/h, 0.10 mbar(abs), completely overhauled

Regal RP12/T twin head rotary filling machine suitable for coleslaw and potato salad type products into square containers. The anticipated production speed is between 60 - 65 containers / minute. The machine will also be capable of running rectangular pots in the future, although an additional set of change parts will need to be purchased. 1.1.1 – PRODUCT SPECIFICATION DETAILS Machine Layout Container Dispense: A twin head positive separation container dispense complete with vacuum assist pull-out arms, to dispense 2 containers each index into the rotary table. The stack will have its own container detection system which will initiate the shift register on the machine. Container Detection: Container detection will be done on the station after the de-nester via 2 visual sensors. Filling Assembly: A twin head, volumetric filling assembly suitable for filling coleslaw and p ...

PAL FP8 Rotary filler Serial: FP8MC00016 2016, The FP8 is a compact rotary filling and closing machine. Whilst fully automatic in its operation this is a simple and flexible machine to use. It can seal a pre-cut or reel fed lid to a pre-formed pot with production speeds of up to 55 pots per minute, depending on the product consistency and fill volume. Product changeovers are quick and easy due to light, simple to change table quadrants and pre-set recipes in the HMI screen.

PAL FP8 Rotary filler Serial: FP8MC00024 2017, The FP8 is a compact rotary filling and closing machine. Whilst fully automatic in its operation this is a simple and flexible machine to use. It can seal a pre-cut or reel fed lid to a pre-formed pot with production speeds of up to 55 pots per minute, depending on the product consistency and fill volume. Product changeovers are quick and easy due to light, simple to change table quadrants and pre-set recipes in the HMI screen.

NC – controlled precision rotary table face grinding machine with vertical grinding spindle and cup grinding wheel - brand new Rotary table diameter 400 mm Largest grindable diameter 400 mm Rotary table speeds 0 to 50 rpm infinitely variable Maximum workpiece weight 75 kg Cup grinding wheel Ø 200 mm x H 80 mm Grinding wheel speed 280 to 2,800 rpm infinitely variable Maximum workpiece height 170 mm Smallest programmable infeed dimension of the grinding wheel 0.001 mm Grinding wheel drive power 3 kW Rotary table drive power 0.5 kW Weight approx. 650 kg

crate tipper functional, for crates up to max 100120cm floor dimension

5 swivel manifolds 8-fold, electric, 160 t/h Tel. 01715213204