rotary 500 used for sale

Drive motor 37kw (can be enlarged to max. 75kw) Rotor diameter 500 mm Width 600 mm 5 knives bevel cut Hinged housing, with 2 stator blades, Inlet opening 500 x 600 mm

used baler Manufacturer: PAAL Type: DOKON 500 with twine tying Year of construction: May 2014 Technical data: Binding: 5-fold horizontal Press weight up to: approx. 30 t Press force: 122 t Specific pressing force: 9.90 kg/cm² Filling opening: approx. 2,000 x 1,020 mm Channel cross-section: 1,100 x 1,100 mm Drive power: 1 x 45 kW Throughput: 250 m³/h Pressing services: at 100 kg/m³ bulk density: approx. 25 t/h at 150 kg/m³ bulk density: approx. 30 t/h at 200 kg/m³ bulk density: approx. 35 t/h Binding: 5-fold horizontal Transport dimensions: Length: 13,300 mm Width: 2,600 mm Height: 3,300 mm without yarn unwinding devices, without control cabinet, without binding twine, without feed belt, without a personal protection system, without conveyor belt hopper and without walking surface with vertical la ...

Product Identifier: FVB-1, 2400 dpi, Fiery EXP50 RIP, Speed: 50 Pages/Minute, Resolution: 600x600 dpi, Paper Capacity: Dual 2000 Sheet Paper Drawer

Transnorm conveyor belt GF 2600-600-500 RA2237 Technical data: Make: Transnorm Conveyor length (NL): 2600 mm Frame width (NB): 600 mm, 700 mm with motor Belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Support feet: optionally available Conveyor speed (v m/s): please contact us Drive: SEW geared motor, R17 DT71D4/TH Electrical data: 50Hz V380-500, kW 0.37 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2008 condition: good (used) Conveying length in mm: 2600 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conv ...

Transnorm conveyor belt GF 2670-600-500 RA2068 Technical data: Conveyor length (NL): 2670 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,67 Drive: SEW gear motor R17 DT71D4/Th Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 2670 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor speed m / s: 0 ...

Availability: as of now Machine dimensions (LxWxH): 0.8 x 0.8 x 2.0 m Weight: 150 kg Bottle drying system was operated without technical problems until 04.2026. The dismantling was then carried out by qualified personnel. Consisting of: - 1 Paxton high-performance centrifugal blower XT 500 4kW - 2 stainless steel heavy-duty air blades 580mm lg. - 2 stainless steel air blade holders for Adjustment in 3 levels - 1 stainless steel base frame with attached Blower - 1 stainless steel air distributor 2 x DN 76 mm - 1 soundproof enclosure for XT 500 blower - 4 stainless steel covers on all sides as Splash guard Additional equipment: - 1 pc. Geset stainless steel nozzle 40 x2 mm incl. piping and hose For lid blow-off before inkjet The Gesete XT 500 bottle drying machine was manufactured in 2014 and is designed for drying bottles in front of a labeling machine (Etima) ...

Used GANDRA TEC 500 + Bag-in-Box filling machine: 3L/ 5L / 10L / 20L Automatic. For automatic hot or cold bottling of fruit and vegetable juices, wines, etc. Supported packaging: 3 l, 5 l, 10 l, 20 l. The bags are introduced automatically from a belt or manually. Vacuum generation and nitrogen injection after pouring are standard. Equipped with a filled bag counter and a liter counter. Filled bags are collected manually in machines. Producer: Gandra Model: TEC 500+ Year of production: 2017 She recently poured NFC apple juice Capacity: Up to 500 3 liter bags per hour • Power supply 400V/50Hz; 2 kW • Air pressure 6 bar • Installed power – 1.5 kW 2 pcs available

Used line for processing green bean by Femia. New 2007. capacity: 5000 kg/h. The line consists of: 1. Descaler. 2. Rinser. 3. Rod splitter. 4. Rod cutter. 5. Aerator. 6. Vibrating distributor. 7. Bean tip cutters. 4 pcs. 8. Conveyors.

Transnorm conveyor belt GF 11380-600-500 RA2095 Technical data: Conveyor length (NL): 11380 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, SA37/T DRS71M4/MM07/LN Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change,13 - 32 m/min Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 11380 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engin ...

Crane bottle, crane hook, load hook, single hook, lower bottle, lifting bottle -Manufacturer: Demag, crane hook lower block -Load capacity: 500 kg -Hook opening: 32 mm -Dimensions: see photos -Dimensions: 240/90/60 mm -Weight: 1.7 kg

Code: 0444 Brand: STROMAB Model: TR 500 MATRIX 4 - CE Standard Automatic cut-off saw equipped with pusher Matrix 4 - with defects removal and 4 optimizing criterials - CE Standard For the sizing and end-trimming of boards, strips, squares of solid wood or timber products Blade diameter 500 mm - Motor Hp 10 – Blade revolutions n° 3000 Cutting dimensions : With thickness 60 mm cutting width mm 360 – With thickness 100 mm cutting width mm 325 – With thickness 115 mm cutting width mm 300 – With thickness 135 mm cutting width mm 250 Worktable height mm 1000 Speed from right to left Electronic programmed pusher Matrix 1 for programmed cutting in sequence Technical data MATRIX: Automatic or semi-automatic cutting cycles Stored cutting cycles 99 Programmable measures for each cycle 15 Useful stroke mt. 7 Positioning speed mt/min 0-40 Max return speed mt/min ...

Key data: 500 mm, 350 mm, 250 mm

Type: Wire EDM Machine Ident Number: 22604 Category: Wire EDM Machines / EDM Manufacturer: Sodick Model: VZ 500 L Year of construction: 2010 Travel: 500 x 350 x 250 mm [ X x Y x Z ] max. workpiece size X: 960 mm max. workpiece size Y: 670 mm max. workpiece size Z: 245 mm max. workpiece weight: 850 kg with automatic wire threading Cutting in a water bath U/V axes +/- 80 x 80 mm Taper 15° at 120 mm height Control LN2W

Tube cutting machine manufactured in 2015. This TRUMPF TruLaser Tube 5000 features a working range of 6500 mm in the X-axis and 310 mm in the Y-axis, with a maximum workpiece length of 3000 mm. It supports various tube diameters and has a maximum workpiece weight of 130 kg. If you are looking to get high-quality tube cutting capabilities, consider the TRUMPF TruLaser Tube 5000 machine we have for sale. Contact us for further details.

The DYNAJET 500th HELI Blue Performance is designed for professional users who need a high-performance, trailer-based high-pressure waterjet system for demanding industrial applications. With hot and cold water operation up to 500 bar and a maximum flow rate of 30 l/min, it is ideal for tasks such as surface preparation, paint and rust removal, concrete renovation and maritime maintenance. Its robust trailer design is designed for demanding daily operations and transport between job sites. The single-axis design supports easy maneuverability, while the integrated single-point lifting eye allows for efficient lifting and positioning when crane handling is required. The Targa design separates the motor, pump and burner area from the operator area, which supports safe and ergonomic operation while reducing noise pollution at the operator station. The colour display provides a clear ov ...

This 3-axis DAEWOO MYNX 500 was manufactured in 2000. It features an X-axis stroke of 1,020 mm, Y-axis stroke of 510 mm, and Z-axis stroke of 575 mm. The machine includes a table dimension of 1,200 x 500 mm and a spindle speed of 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the DAEWOO MYNX 500 vertical machining centre we have for sale. Contact us for further details.

Type: Milling Machine/Machining Center Ident Number: 22592 Category: Milling Machines Manufacturer: Exeron Model: HSC 500 Year of construction: 2016 Travel: 620 x 570 x 350 mm [ X x Y x Z ] HSC Machine Number of axles: 3 Spindle mount: HKS 40-E Spindle speed: 42000 rpm max. workpiece weight: 350 kg ITNC 530 Software 30-speed WZ changer Spindle HSK40 Blumlaser Tool Measurement Renishaw Probes Aspirator Oil mist extraction Minimum quantity lubrication

1. Equipment Overview Equipment: Siemens SGT-500 Gas Turbine Packages Quantity: Two (2) units available Condition: New Surplus / Zero Operating Hours Manufacturing & Storage: Manufactured in 2007 Never operated – zero operating hours Preserved and stored according to OEM preservation procedures Originally supplied for a cancelled FPSO project Certification: Marine Rated DNV (Det Norske Veritas) Certified 2. Gas Turbine Technical Data Model: Siemens SGT-500 Configuration: Single-shaft industrial gas turbine Fuel: Dual Fuel (Natural Gas / Diesel) Frequency capability: 50 / 60 Hz ISO Power Output (Indicative): Natural Gas: approximately 17.4 MW Diesel: approximately 17.0 MW Performance: Specific Fuel Consumption: Natural Gas: 221 g/kWh Diesel: 262 g/kWh Heat Rate: Natural Gas: 11,066 kJ/kWh Diesel: 11,200 kJ/kWh  ...

A stationary oil lubricated, belt driven reciprocating compressor from Mark with an air receiver is offered. Motor power: 7.5kW (10hp), intake capacity: 1300l/min, max. operating pressure: 10bar, air receiver volume: 500l, compressed air connection: G 1/2. Dimensions X/Y/Z: approx. 1910mm/600mm/1230mm, weight: approx. 330kg. Inspection possible by prior arrangement.

Type: Milling Machine/Machining Center Ident Number: 22367 Category: Milling Machines Manufacturer: Mikron Model: HSM 500 Year of construction: 2006 Travel: 500 x 450 x 360 mm [ X x Y x Z ] HSC Machine Number of axles: 3 Control: Heidenhain iTNC 530 Spindle mount: HSK 32 E Spindle speed: 54000 rpm Table size X: 550 mm Table size Y: 450 mm max. workpiece weight: 200 kg Tool changer: 40 speed Conveyor Laser probes for tools Probe PS 32 Infrared / HSK 32 E Minimal lubrication Oil Mist Extraction Device APS Advanced Process System ITC Intelligent Heat Control Mobile handwheel

Specifications: Workspace X axis: 500 mm Y axis: 400 mm Z axis: 300 mm Working spindle Tool holder: ISO 40 Auto. Feeds: 0.2 - 0.6 - 0.12 mm/min Spindle speeds: 20 - 4000 1/min, directly programmable Feed range: X / Y / Z = 1 - 3000 mm/min Rigid table: 700 x 350 mm, 5 T-slots Rigid table: max. load capacity of 250 kg Connection: 400 V Weight, approx.: 1900 kg Machine dimensions, approx.: 2400 x 1850 x 1850 mm Dimensions: 3200 x 4100 mm, height 1920 mm Equipment: - CNC control - Rigid table - Milling head swivels +/- 90° - Hydr. Clamping device - Coolant device - Emergency stop push button

Lippert Belt Conveyor Riser with arch and straight GF 6640-650-500 RA1420 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 6640 mm (ascending conveyor 5390mm + arch 500mm + upper straight 750mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection  ...

Key data: 500 kN

Injection moulding machine Arburg 270 D 500-210 with control cabinet, functional, built in 1990, power 20kW, weight 1,850 kg, Clamping force 500 kn

A Daiß + Partner CNC automatic band saw with a double-miter twin-column design is offered. Cutting capacity X/Y: 500mm/320mm, saw blade dimensions: 4700mm/34mm/1.1mm, feed length: 2000mm, rapid traverse: approx. 12m/min, blade speed: 15-105m/min, CNC control: PS 210. Equipment: powered chip brush, Power-Box hydraulic cutting pressure adjustment, Micro-Cooler coolant spray system, hydraulic saw blade tensioning and saw blade breakage monitoring. An on-site inspection is possible.

The steam boiler plant was put into operation in February 1992 and has been running smoothly for the entire service life since then. The steam boiler has a capacity of NW 7170 ltr and is operated with a maximum operating overpressure of 10 bar. It can run on oil and gas. The steam boiler was regularly serviced and inspected by the TÜV. The last TÜV inspection took place in 2018 without any complaints. The steam boiler has been filled with treated water since its decommissioning in 2019 and can be dismantled and transported away immediately. The closure took place due to a plant closure. The complete documentation is available in the original. Further information, including price, can be requested by calling 0345 6868-0 or infonovachem

Key data: 2000

Nozzle spacing: 100 mm Screw diameter: H260: 38 H470: 45 mm Injectable volume:H260: 168 H470: 278 cm3 Injection Pressure: H260: 1564 H470: 1659 Column width: 610 x 610 mm Mould thickness: 280-760 mm Opening stroke: 560 mm Cores:: 2 Robot Interface: Yes Possibility of a GROSFILLEY swivel base

Key data: 510 mm, 510 mm, 510 mm

Inv. Num. : 7409 Type: ARROW 500 Producer: CINCINNATI MILACRON Created: 1996 Parameters: Control system: ACRAMATIC A 2100 Number of stacking positions: 21 Work table length: 700 mm Work table width: 520 mm Maximum table load (uniform): 350 kg Maximum vertical spindle speed: 6000 1/min X-axis travel: 510 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Cone: CAT 40 Machine height: 2650 mm Machine length: 2700 mm Machine width: 2000 mm Machine weight: 3050 kg Equipment: Tool Holder

Heraeus Kendro WU 6100 High Temperature Convection Oven - 500°C - 95 L Heat circulating air drying oven for precise thermal testing of high-quality materials and for demanding thermal processes in the high-temperature range. For precise heat treatment processes up to 500 °C. Provides precise and uniform temperature distribution as well as exact adherence to the selected temperature. Manufacturer: Heraeus – Kendro (Thermo Fisher Scientific Brand). Made in Germany. Technical data: Interior volume: 95 L Temperature range up to 500°C External dimensions (WxHxD): 985 x 840 x 905 mm Internal dimensions (WxHxD): 475 x 475 x 420 mm Weight empty 195 kg 400 V. 50/60 Hz. 11.4 A. 5.4 kW. Equipment: Temperature controller with digital display (thermicon P) Over- and under-temperature protection Throttle valve for infinitely variable fresh and exhaust air regulation Time  ...

LWB Steinl Injection Machine Type VCE -T 500/160 T Clamp power 500 KN Injection volume 160 cm3 Year 2006 6 Bar 400 v 50 hz 26 KW

; Gross weight [kg]: 2924; Engine: Caterpillar C13; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 721

cutting width: max. 375 mm Cutting height: max. 125 mm Saw blade diameter: 500 mm Motor output: 5,5 kW turning speeds: 2800 U/min Required air-pressure: 6-8 bar Dimensions (L/W/H): 530x869x1217 mm SALVAMAC Legend 500 fast semi-automatic chop saw -------------------------------------------------- - Maximum cutting area Option A: 220x125/310x50mm Option B: 350x80/375x50mm (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Engine power of the saw motor 5.5 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system to ...

Technical data for the pallet racking system: Shelving system: Dexion Type: P 90 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 15,100 mm Number of shelves per row of shelves: 05 pcs. Number of levels plus floor level: 06 pcs. Volume Specifications: Pallet spaces per field: 21 pcs. Pallet spaces per row: 105 pcs. Total pallet spaces: 105 pcs. Started from: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 900 kg The scope of delivery includes: 06x Pallet rack stand, used Material colour: sendzimir galvanized Type: 100|30 Profile dimensions: 100 x 100 x 3 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled (bolted truss) 12,500 mm high 1,100 mm deep 60x Pallet rack crossbeam, used Material colou ...

; Gross weight [kg]: 690

turning diameter over bed: 400 mm turning diameter over slide rest: - mm turning length: 1000 mm total power requirement: 9 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2,51,21,6 m Machine has been partially overhauled Among other things engine renewed ( 8.000 EUR ) The repair was not completed due to plant closure The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

From an operational resolution: Zagro UVB Z 500 S YEAR OF MANUFACTURE unknown 380 VOlt Emergency stop Saw rollers Ø 500 mm Cutting length 700 mm Cutting width 450 mm Cutting heights 530 / 650 mm Saw blade lengths 3720 / 3920 / 4120 mm Table size 1000 x 800 mm AC 230 V / 16 A Width 1000 mm Total height 1800 mm Total weight 180 kg ----Engine cover is missing--see photo---

diameter: 0 mm workpiece length: 0 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Crack testing device for large series of workpieces The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 500 mm throat: 485 mm workpiece height: mm total power requirement: 2 kW weight of the machine ca.: 1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 24000 kg length: 5000 mm width: 2500 mm loading area height: 700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: heavy version -Material: Cast iron -Dimensions: see photos / technical drawing -Quantity: 1x mounting cube available -Dimensions: 500/300/H300 mm -Weight: 89.7 kg

NON-FERROUS METAL SORTER - with vibrating feed conveyor and magnetic drums - For sorting e.g. iron, aluminium and copper - Conveyor width 500 mm - 14-pole concentric separation drum - Sturdy PVC strap - With control cabinet, 2 frequency converters for the band and the separation drum - Color according to customer requirements - New machine made in the EU

We offer a highly productive 3D printer for industrial series production The system was finally used with aluminum powder AISi10MG The 3D printer has already been dismantled by the manufacturer Disassembly logs are available as well as functional logs that prove that the machine was in operation before dismantling All axles are professionally secured The machine can be transported on a normal standard truck TruPrint 5000 G4 Serial Number S0731C0008 Year of construction 08/2018 Time-of-Flight Laser Laser 1 Beam on On: 5165 hrs Laser 2 Beam on On: 5096 hrs Laser 3 Beam on on: 5023 hrs Trumpf TruPrint 5000 with Powder Bed Monitoring and Melt Poll Monotoring options included Filter system Accessories: 2pcs. Build Cylinder 3pcs. Dosing cylinder 1 pc. overflow tank used 1 Pc. Overflow Tank NEW Manuals 4 Heat Exchangers NEW 2 pcs Easy Filter NEW 3 pcs NTRON SIL ...

This 5-axis Mazak VARIAXIS I 500 was manufactured in 2006. It features an X-axis travel of 510 mm, Y-axis travel of 510 mm, and Z-axis travel of 460 mm. The machine includes a tool magazine capacity of 60 tools and a maximum spindle speed of 12,000 rpm. If you are looking to get high-quality milling capabilities, consider the Mazak VARIAXIS I 500 vertical machining centre we have for sale. Contact us for further details.

A small Alfred Reith bench punch is available. Punching force: 50kN, max. round hole diameter: 60mm, max. square hole dimensions X/Y: 46mm/46mm, max. mild steel sheet thickness: 3mm, max. stainless steel sheet thickness: 2mm, max. aluminum thickness: 4mm, throat depth: 500mm, stroke: 66mm, weight: approx. 200kg. Documentation available. An on-site inspection is possible.

Complete solution for the transport of bulk materials such as shredded material, wood chips, wood pellets, granules, etc. Aluminium angled conveyor belt incl. substructure horizontal area 2,500mm (customizable) Rising area 5,000mm (customizable) Angle in bend 35, 40 or 45° Feed height: horizontal (individual) Drop height individually adjustable Construction: height-adjustable (to be moved) Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Propulsion: Motor 1.1KW ( adjustable ), speed approx. 0.3m/sec Connection 220/240V, 50Hz IP54 protection Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x25mm T-50 cleats - 400mm pitch 2-ply particularly transversely stable Permanently mounted overbelt magnetic  ...

Voran Pasteurizer 500l/h Gas Used Subject to prior sale!

Lippert belt conveyor GF 24500-650-500 RA1462 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 24.500 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 64 mm Drive drum (AT): Ø = 81 mm Belt: Type NNT-10 ENBU Year of construc ...

x-travel: 4.300 mm y-travel: 1.500 mm z-travel: 1.800 mm Control: HEIDENHAIN TNC 530 table-size: 5.000 x 2.250 mm T-slots: 9 T-slot - distance: 250 mm T-slot - width: 28 mm rapid traverse: 15.000 mm/min feeds: 10.000 mm/min milling head: 45° Automatisch UAD milling head: 0,1 º- 0,1 º conus- taper: ISO-50 DIN 69871 AD-50 number of spindle speeds: 60 - 6.000 U/min/rpm transmission ratio: 2 spindle drive: 28 kW Internal cooling system: 20 bar chip conveyor: Inkl. handwheel: Inkl. total power requirement: 36 kW weight of the machine ca.: 40.1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.