rota used for sale

DH Robotics RGI-14 Rotary Gripper Gripping force (per jaw): 10~35 N Stroke (both sides): 14 mm Rotation torque: 0.25 N.m Rotation range: Infinite Mechanical specifications Maximum speed of rotation: 1500 deg/s Repeatability of rotation: ± 0.02 deg Backlash of rotation: ± 1 deg Position repeatability (gripping): ± 0.02 mm Opening/closing time: 0.2 s/0.2 s Weight: 1.1kg  Electrical specifications Communication interface: Modbus RTU(RS 485), Digital I/O Nominal voltage: 24 V DC ± 10% Nominal current: 1.1 A Peak current: 2 A Ingress protection rating: IP 20 Recommended operating environment : 0~40°C,

DH Robotics RGI-30 Rotary Gripper Gripping force (per jaw): 10~35 N Stroke (both sides): 14 mm Rotation torque: 0.25 N.m Rotation range: Infinite Mechanical specifications Maximum speed of rotation: 1500 deg/s Repeatability of rotation: ± 0.02 deg Backlash of rotation: ± 1 deg Position repeatability (gripping): ± 0.02 mm Opening/closing time: 0.2 s/0.2 s Weight: 1.2 kg  Electrical specifications Communication interface: Modbus RTU(RS 485), Digital I/O Nominal voltage: 24 V DC ± 10% Nominal current: 1.1 A Peak current: 2 A Ingress protection rating: IP 20 Recommended operating environment : 0~40°C,

Weiler Nachlathe (could be a hamlet FDU260) Converted with speed switching for thread cutting incl. hand lever cross support

weight max.: 1000 kg table turning speeds: 180 - 1800 mm/min. roll diameter: 200 x 50 mm workpiece diameter: 50 - 1500 mm volt: 230 V / 50 Hz range L-W-H: 950 x 220 x 344 mm Mitlauf weight: 100 kg range L-W-H: 1270 x 310 x 344 mm Antrieb Furnishing: - Consists of a drive unit and a follower unit. - Clean, fluid turning movement even in the lower speed range. - PU rollers. - The container diameter can be adjusted quickly and easily using socket pins. - Hand remote control (3 meters) to set the speed and right / Counterclockwise rotation. - foot switch. - Compact, stable structure, easy to handle. Scope of delivery: - 1 control (integrated) - 1 foot switch - 1 wired remote control - Operating instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 3000 kg. table turning speeds: 120 - 1200 mm/min. roll diameter: 250 x 75 mm workpiece diameter: 150 - 2000 mm volt: 230 V / 50 Hz range L-W-H: 1210 x 300 x 480 mm Mitläufer weight: 154 kg range L-W-H: 1510 x 500 x 480 mm Antrieb Furnishing: - Consists of a drive unit and a follower unit. - Clean, fluid turning movement even in the lower speed range. - PU rollers. - The container diameter can be adjusted quickly and easily using socket pins. - Hand remote control for setting the speed and clockwise - counter clockwise rotation. - foot switch. - Compact, stable structure, easy to handle. Scope of delivery: - 1 control (integrated) - 1 foot switch - 1 wired remote control - Operating instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rotary table, round dividing table, circular dividing table WMW C 315 k ( C315k ) TGL28561/01 Table diameter: Ø 315 mm Table height: 135 mm Slot width: 14 / 25 mm Groove depth: 24 mm Centering hole in table: Ø 23 mm Mounting holes in footplate: Ø 21 x 25 mm ( U-shape ) used, tested ! Dimensions: 560 x 395 x 135 mm

Rotary encoders, rotary encoders, pulse generators, encoders AMK CMB TD35/250 Pulse generator: HP HEDS-6310 Shaft: Ø 15 mm Wavelength: 22 mm Toothed pulley: Ø 96 mm, width: 15 mm foot: 120 x 45 mm spare part for lathe CMB TD35/250 !, among others used, tested ! Dimensions ( without cable ): 270 x 120 x 140 mm

dimensions: 3500 x 3000 mm max load: 50 ton longitudinal travel: 2700 mm rated torque of turning motor: 22 mkg circular feed: 0,0006 gt; 0,6 rpm rated torque of longitudinal travel: 9,4 mkg 13 T-slots (width 36 mmnbsp; H7) power: 50 kVa weight: 31 ton

Centrifugal pump Manufacturer: Hilge Type Euro Hygia I Adapta Serial number 22/01/131256 Flow rate 6 m³ Delivery altitude 39 m Power: 3.0 kW Speed 2,900 rpm Inlet DN 40 Outlet DN 30 Flange connection Frequency converter Housing drain Pharmaceuticals, WFI Water

Centrifugal pump Manufacturer: Hilge Type Euro Hygia I Adapta Serial number 22/04/138796 Flow rate 6 m³ Delivery altitude 39 m Power: 3.0 kW Speed 2,900 rpm Inlet DN 40 Outlet DN 30 Flange connection Frequency converter Housing drain Pharmaceuticals, WFI Water

Offer 23207 Specifications: - Load capacity 2500 kg - Face plate dimensions 750 x 750 mm - Face plate can be swivelled up to 135 ° via geared motor - Rotary movement electr. infinitely variable - Footswitch for right-hand rotation - left-hand rotation - Welding current transmission 650 A - Drive 400 V - Table height in horizontal position 1090 mm - Space requirement approx. W 1150 x D 1250 x H 1090 mm - Weight approx. 1.2 t

Conveyor belt, belt conveyor, conveyor belt, belt conveyor -Belt width: 2x 32 mm -Conveyor belt length: 1500 mm -Drive: 0.37 kW -Speed: 71 rpm -Conveyor belt: rotatable -Height: adjustable -Number: 4x conveyor belts available -Price: per piece -Dimensions: 1500/800/H950 mm -Weight: approx. 300 kg

Conveyor belt, belt conveyor, conveyor belt, belt conveyor -Belt width: 2x 50 mm -Width: adjustable -Conveyor belt length: 1440 mm -Drive: 0.37 kW -Speed: 71 rpm -Conveyor belt rotatable via servo motor -Height: adjustable -Dimensions: 1440/550/H950 mm -Weight: approx. 150 kg

Incremental rotary encoder with solid shaft -Type: IG09M -Voltage: + 10 - + 30 VDC -Weight: 0.4 kg

Rotary actuator for switch-disconnector, lockable EFEN 172 H 0003-2 ( 172H00032 ) 29.550.0030 aperture: 100 x 100 mm New ! Dimensions (packaging): 200 x 150 x 100 mm

Rotary Drive, Actuator, 90° Rotary Drive BERNARD ASP 25 ( ASP25 ) 150 Nm 0,0,25 rpm 0,03 KW 400 V hollow shaft: Ø 20 mm Flange diameter: Ø 125 mm New ! Dimensions: 470 x 340 x 320 mm

Positioning unit PAGUS stroke: 100 mm, rotation: 330° lifting motor: KEB 57/2.200.4,2 Rotary motor: PHYTRON ZSH 57-200-4,2 Rod diameter: Ø 30 mm Flange diameter: Ø 45 mm bolt circle diameter: Ø 55 mm hole diameter: Ø 4.5 mm with guide frame, 70 mm height adjustable used, tested ! Dimensions: 530 x 250 x 230 mm

Rotary table, swivel and swivel WMW Ø 450 mm swivel 360° x 90° Groove width: 14 / 25 mm foot size: 400 x 500 mm used, tested ! Dimensions: 860 x 800 x 400 mm

Rotary table DSZ MKA 250 Ø 250 mm Table height: 115 mm Slot width: 14 / 20 mm Dimensions: 340 x 410 x 150 mm

Rotary encoders, rotary encoders, pulse generators, encoders, with centrifugal switch HÜBNER POG 10 DN 1000 I ( POG10DN1000 I ) 1000 pulses / revolution U: 9 - 30 V DC n: max. 7200 rpm shaft: Ø 11 mm Flange: Ø 115 mm centrifugal switch: FSL Switching speed at start-up: 890 rpm Breaking capacity: 230 V AC, 6 A 125 V DC, 1 A IP65 New ! Dimensions: 185 x 115 x 145 mm

Rotary encoders, rotary encoders, pulse generators, encoders, with centrifugal switch HÜBNER POG 10 DN 1000 I ( POG10DN1000 I ) 1000 pulses / revolutionbr /br /br /br /1000 pulses / revolution U: 9 - 30 V DC n: max. 7200 rpm hollow shaft: Ø 18 mm Flange: Ø 144 mm centrifugal switch: FSL Switching speed at start-up: 890 rpm Switching capacity: 230 V AC, 6 A 125 V DC, 1 A IP65 New ! Dimensions: 325 x 145 x 145 mm

Rotary encoders, rotary encoders, pulse generators, encoders, with centrifugal switch BAUMER BHB 05.05A1024-22-5 ( BHB05.05A1024-22-5 ) hollow shaft: Ø 30 mm, depth: 10 mm flange: Ø 144 mm approx. 0.3 m connection cable housing: Ø 100 x 45 mm Material: Aluminium used, tested ! Dimensions: 135 x 120 x 76 mm

Rotary pulse encoders, rotary encoders, pulse generators, encoders HÜBNER POG 10 D 1024 ( POG10D1024 ) 1024 pulses / revolution U: 9 - 30 V DC n: max. 7000 rpm shaft: Ø 11 mm flange: Ø 115 mm used, tested ! Dimensions: 140 x 115 x 145 mm

Rotary encoders, rotary encoders, pulse generators, encoders, with intermediate flange HÜBNER POG 10 D 1024 ( POG10D1024 ) 1024 pulses / revolution < &br /> U: 9 - 30 V DC n: max. 7000 rpm hollow shaft: Ø 11 mm flange: Ø 150 mm used, tested ! Dimensions: 172 x 150 x 150 mm

Centering vice PAGUS jaw height: 50 mm wingspan: 0...95 mm on table with graduation 360° rotatable Dimensions: 330 x 255 x 160 mm

Round Dividing Table, Rotary Table WMW (SEMPUCO Greiz) RmM 315 - 3007 Ø 315 mm Table height: 155 mm Slot width: 14 / 24 mm Dimensions: 625 x 490 x 155 mm

Rotary table PAGUS Ø 300mm used, tested ! Dimensions: 60 x 60 x 25 cm

Round Dividing Table, Rotary Table, Circular Dividing Table TOS SM500 Ø 500 mm 360° Division used, tested ! Dimensions: 700 x 700 x 200 mm

Rotary table with 3-jaw chuck PAGUS Ø 250 mm Table height: 170 mm groove width 12 mm used, tested ! Dimensions: 350 x 300 x 170 mm

Milling table mounting, rotatable and tiltable PAGUS ±45° rotatable ±30° tiltable used, tested ! Dimensions: 380 x 275 x 230 mm

Rotary actuator, swivel motor HSK-DREH-ANTRIEBE Gmbh HKS40360 Item no.: 100418000017 p: max. 210 bar shaft diameter: Ø 22 mm Flange diameter: Ø 98 mm used ! Dimensions: 225 x 100 x 110 mm

Rotary union for coolant DEUBLIN 2520-243 Flange diameter: Ø 108 mm bolt circle diameter: Ø 91 mm 4x bore: Ø 11 mm used, tested ! Dimensions: 156 x 108 x 108 mm

Rotary actuator, swivel motor HSK-DREH-ANTRIEBE Gmbh HDZ63-10/180°D Art.-No.: 0312860 - H 96543.53 Swenk angle: max. 180 ° p: max. 210 bar shaft diameter: Ø 35 mm flange diameter: Ø 128 mm used ! Dimensions: 315 x 130 x 155 mm

Rotary union for coolant DEUBLIN 1105-429-556 Housing diameter: Ø 44 mm used, tested ! Dimensions: 107 x 50 x 44 mm

hydraulic slewing actuator, rotary actuator SÜDHYDRAULIK LÜBECK, KORK-STEINBACH GmbH HDK75.87H Drawing No.: 7008.0001 Shaft diameter: Ø 40 mm Wavelength: 87 mm 2x Groove width: 12 mm Flange diameter: Ø 100 / 180 mm bolt circle diameter: Ø 155 mm 8x Tapped hole: M10 x 1.5, depth: 27 mm spare part for machining center HELLER BEA 05 DC used, tested ! Dimensions: 275 x 180 x 190 mm

In-line limit switch EUCHNER RGBF 16 ( RGBF16 ) D12-796 10 A 250 V IP67 New ! Dimensions: 240 x 122 x 105 mm

Swivel heart assortment, swivel heart, with fixed inner diameter, 323 pieces PAGUS inner diameter: Ø 2,0 - 44 mm 137 pieces in the inner diameter range: Ø 2.0 - 10 mm 118 pieces in the inner diameter range: Ø 10 - 20 mm 68 pieces in the inner diameter range: Ø 20 - 44 mm e.g. for cylindrical grinding machines Packed in three stacking containers, dimensions: 380 x 285 x 45 mm used, checked ! other quantities on request. Dimensions ( packaging ): 380 x 285 x 120 mm

Rotary actuator FTW, PRODUCTION TECHNOLOGY Weißenfels DR400 AV Rotation angle: 360° turntable: Ø 420 mm Fastening flange: 530 x 505 mm Drive ring: Ø 128 / 108 mm Guide bolt: Ø 65 mm Flange for drive: Ø 80 / 130 mm, Bolt circle diameter: Ø 165 mm spare part for machining center HECKERT CWK400 D ! used, tested ! Dimensions: 530 x 515 x 450 mm

Optical Rotary Table, Round Dividing Table, Circular Dividing Table WMW, CARL ZEISS Ø 315 mm Table height: 135 mm Slot width: 10 / 19 mm Groove depth: 18 mm Centering hole in the table: Ø 18 mm with optical fine display ! 12 V AC 50 W used, tested ! Dimensions: 530 x 410 x 135 mm

Rotary Table, Round Dividing Table, Circular Dividing Table WMW C 315 k ( C315k ) TGL28561/01 Table diameter: Ø 315 mm Table height: 135 mm Groove width: 14 / 25 mm Groove depth: 24 mm Centering hole in table: Ø 24 mm Mounting holes in footplate: Ø 21 x 25 mm ( U-shape ) used, tested ! Dimensions: 560 x 395 x 155 mm

Rotary table with 4 jaw chucks PAGUS Diameter: Ø 160 mm Table height: 160 mm Rotary chuck 360° rotatable (manual, without gearbox ) with 15° detents (small lever ) two levers for clamping the lathe chuck used, tested ! Dimensions: 390 x 330 x 160 mm

Container turning device, roller block PAGUS load capacity: approx. 10 t per trestle 3 pieces wheel diameter Ø 320 mm without drive ! Weight: 3 x 950 kg Dimensions: 3 x 2020 x 870 x 1100 mm

Rotary table PAGUS Ø 800 mm Table height: 160 mm 4 grooves: 50 mm Dimensions: diameter 930 x 470 mm

Rotary table for lathe chuck PAGUS diameter lathe chuck: max. Ø 200 mm bolt circle lathe chuck: 140 - 180 mm Flange: Ø 130 mm table height: 70 mm 360° rotatable Base plate: 290 x 220 mm used, tested ! Dimensions: 350 x 300 x 80 mm

Round Dividing Table, Rotary Table, Circular Dividing Table PAGUS Ø 250 mm Table height: 98 mm Slot width: 14 / 25 mm Groove depth: 23 mm used, tested ! Dimensions: 400 x 350 x 100 mm

Round dividing table, rotary table, circular dividing table with 3-jaw chuck WMW Rotary table: D 315 K TGL 28561/02 Ø 315 mm Table height: 135 mm groove width: 14 / 25 mm with 3 jaw chuck: DH 200x3 TGL 30-2332 Ø 200 mm used, tested ! Dimensions: 690 x 540 x 290 mm

Round tablewith 3 jaw chucks PAGUS diameter: Ø 130 mm hole diameter: Ø 28 mm height with jaws: 135 mm 360° rotatable used, tested ! Dimensions: 320 x 265 x 135 mm

Rotary lobe pump Manafacture: Waukesha Type 030 U1 Serial number 2429727 - 100000 Power: 1.5 kW Speed 1,400 rpm Inlet DN 40 Outlet DN 40 Gearbox i=14,155 Sealing water

Round Dividing Table, Rotary Table, Circular Dividing Table WMW RT400S Ø 400 mm Table height: 200 mm Groove width: 18 / 32 mm Groove depth: 32 mm Footprint: 430 x 400 mm used, tested ! Dimensions: 600 x 510 x 200 mm

Round table, round dividing table, circular dividing table PAGUS Ø 250 mm Table height: 100 mm Slot width: 14 / 24 mm Groove depth: 23 mm Centering hole in table: Ø 20 mm Mounting holes in base plate: Ø 15 x 24 mm ( U-shape ) used, checked! Dimensions: 400 x 350 x 100 mm