4321 offers

maximum number of results exceeded > 1000
please refine your search

Category: 109: other metal working machines
New in: 2001
Price: request quote
Location: Land-de DE 44369 Dortmund, Deusener Str. 3
Seller: VEI-Engineering GmbH

Vacuum furnace, make Ipsen suitable for sintering type: VUTK y.o.m.: 2001 power: 571 kVA useful dimensions (h x l x w): 1050 x 1650 x 1000 mm charge: 3000 kg gross working temperature: vacuum operation 500°C - 1350°C convection operation150°C - 850°C pumps: rotary vane pump Leybold SOGEVAC SV 1200 roots pump Leybold RUVAC RA 5001 process controller: Demig heating chamber: was revised in 2012 heat exchanger: was renewed in 2016 rotary vane pump: completely overhauled in 2018

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make DMN-WESTINGHOUSE, Type AL 250 2D, No RVNL136780, New 2014, Rotary valve , House material stainless steel , Rotor material stainless steel , Rotor diameter 250mm, Rotor width 310mm, Inlet dia.250mm, Inlet flange sizes 406x250 stc.350, Outlet dia.250mm, Outlet flange sizes 406x250 stc.350, Daylight 450mm, With motor 1.1 KW, 219-241/380-420Volt, Rotor speed 25 rpm, Outer laying bearings , Air purged sealings , Capacity 19 Ltr/rev, Floorspace 1.2x0.6 M, Total height 0.45 MROTATING VALVESROTARY VALVES > ROTATING VALVES What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspe ...

Category: 604: textile finishing machines
New in: 1989
Price: request quote
Location: Land-au AU 0
Seller: Euro Impex Inc.

JOHANNES ZIMMER ROTARY SCREEN PRINTING MACHINE 14 COLOURS WIDTH 200CM REPEAT 640 YEAR 1989 3 CHMABER GAS DRYER MACHINE IS IN WORKING FOR KNITTED FAVRIC EXCELLENT CONDITION STILL IN PRODUCTION WITH SCREEN WASHING EQUIPMENT ELECTRIC SYSTEM 3 PHASE 400VOLT 50HZ

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make DMN-WESTINGHOUSE, No 148765/2A 20DV AX, Rotary valve for air transport , House material stainless steel , Rotor material stainless steel , Rotor diameter dia.175mm, Rotor width 200mm, Inlet dia.180, Inlet flange sizes 315x175 stc.270mm, Outlet dia.65mm, Outlet flange sizes 140x65 stc.120mm, Daylight 340mm, With motor 0.75 KW, 230/400Volt, Rotor speed 48 rpm, Outer laying bearings , Air purged sealings , Capacity 5.5 Ltr/rev, Floorspace 1.1x0.35 M, Total height 0.35 MROTATING VALVESROTARY VALVES > ROTATING VALVES What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect ...

Category: 604: textile finishing machines
New in: 1989
Price: request quote
Location: Land-au AU 0
Seller: Euro Impex Inc.

JOHANNES ZIMMER ROTARY SCREEN PRINTING MACHINE 14 COLOURS WIDTH 200CM REPEAT 640 YEAR 1989 3 CHMABER GAS DRYER MACHINE IS IN WORKING FOR KNITTED FAVRIC EXCELLENT CONDITION STILL IN PRODUCTION WITH SCREEN WASHING EQUIPMENT ELECTRIC SYSTEM 3 PHASE 400VOLT 50HZ

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make DMN-WESTINGHOUSE, No 148765/2A 20DV AX, Rotary valve for air transport , House material stainless steel , Rotor material stainless steel , Rotor diameter dia.175mm, Rotor width 200mm, Inlet dia.180mm, Inlet flange sizes 315x175 stc,270mm, Outlet dia.65mm, Outlet flange sizes 140x65 stc.120mm, Daylight 340mm, With motor 0.75 KW, 230/400Volt, Rotor speed 48 rpm, Outer laying bearings , Air purged sealings , Capacity 5.5 Ltr/rev, Floorspace 1.1x0.35 M, Total height 0.35 MROTATING VALVESROTARY VALVES > ROTATING VALVES What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspe ...

Category: 101: boring mills and machining centers
New in: 2015
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 904986 Number: 1 PCs. Manufacturer: CHIRON Type: DZ 15 FX Magnum high speed Control: Siemens 840 D solutionline Year of constr.: 2015 State of preservation: second-hand machine Stories about: 1-2 layers DESCRIPTION MILLING Travel in X 630 mm Travel in Y 400 mm Travel in Z 360 mm Maximum rapid traverse in X/Y/Z 75/75/75 m / min Maximum acceleration in X/Y/Z 0.7/1.0/1.2 g Direct measuring system X/Y/Z Tool holder HSK 63 Maximum speed milling spindle 12000 1/min Maximum power with ED 10-40 / 100% 37/17 kW Maximum torque at ED 10-40 / 100% 180 nm Vertically arranged 2 PCs. spindle/n Spindle distance 400 mm Chain-type tool magazine 2 Ã? 2 ...

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make DMN-WESTINGHOUSE, No 148765/2A 20DV AX, Rotary valve for air transport , House material stainless steel , Rotor material stainless steel , Rotor diameter dia.175mm, Rotor width 200mm, Inlet dia.180mm, Inlet flange sizes 315x175 stc.270mm, Outlet dia.65mm, Outlet flange sizes 140x65 stc.120mm, Daylight 340mm, With motor 0.75 KW, 230/400Volt, Rotor speed 48 rpm, Outer laying bearings , Air purged sealings , Capacity 5.5 Ltr/rev, Floorspace 1.1X0.35 M, Total height 0.35 MROTATING VALVESROTARY VALVES > ROTATING VALVES What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspe ...

Category: 101: boring mills and machining centers
New in: 2015
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 904987 Number: 1 PCs. Manufacturer: CHIRON Type: DZ 15 FX Magnum high speed Control: Siemens 840 D solutionline Year of constr.: 2015 State of preservation: second-hand machine Stories about: 1-2 layers DESCRIPTION MILLING Travel in X 630 mm Travel in Y 400 mm Travel in Z 360 mm Maximum rapid traverse in X/Y/Z 75/75/75 m / min Maximum acceleration in X/Y/Z 0.7/1.0/1.2 g Direct measuring system X/Y/Z Tool holder HSK 63 Maximum speed milling spindle 12000 1/min Maximum power with ED 10-40 / 100% 37/17 kW Maximum torque at ED 10-40 / 100% 180 nm Vertically arranged 2 PCs. spindle/n Spindle distance 400 mm Chain-type tool magazine 2 Ã? 2 ...

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make Mikropul gmbh, Type ACM-10, Mounted on frame , With switchgear , Grinder Classifier system, Material stainless steel , Grinding room size dia. 310mm, Fixed hammers , With grinding track , Inlet dia. 50mm, Feeding with rotating valve , Motor 7,5 KW 380 Volt , 1,1 KW 220/380 Volt, Floorspace ± 3,3 x 2,2 M, Total height 2,7 M, Weight ± 1600 KG, Extra Specifications 1x ventilator Van Tongeren kennemer type S395/3/4800 11KW, 400/690 Volt, 1x dosing screw dia. 225mm 0,37 KW, 220/380 Volt, 1x dustcollector Donaldson TDP675 230 Volt, 1x cyclonefilter :Van Tongeren kennemer type AC850/3.0, 1x cabinet. + OVERHAULED +SIZE REDUCTION MILLSGRINDERS > SIZE REDUCTION MILLS What you can expect from F ...

Category: 101: boring mills and machining centers
New in: 2014
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 904988 Number: 1 PCs. Manufacturer: CHIRON Type: DZ 15 FX Magnum high speed Control: Siemens 840 D solutionline Construction year: 2014 State of preservation: second-hand machine Stories about: 1-2 layers DESCRIPTION MILLING Travel in X 630 mm Travel in Y 400 mm Travel in Z 360 mm Maximum rapid traverse in X/Y/Z 75/75/75 m / min Maximum acceleration in X/Y/Z 0.7/1.0/1.2 g Direct measuring system X/Y/Z Tool holder HSK 63 Maximum speed milling spindle 12000 1/min Maximum power with ED 10-40 / 100% 37/17 kW Maximum torque at ED 10-40 / 100% 180 nm Vertically arranged 2 PCs. spindle/n Spindle distance 400 mm Chain-type tool magazine 2 à...

Category: 104: grinding machines
New in: used
Price: request quote
Location: Canada
Seller: ProdEq Trading GmbH

grinding height: 15 mm grinding width: 235 mm grinding wheel diameter: 762 mm --------------------------------------------------: WORKING RANGE (DOUBLE DISC GRINDER): - Grinding wheel diameter: 762 mm - grinding width max. - throughfeed grinding: 235 mm - material thickness max. - throughfeed grindin: 15 mm GRINDING SPINDLE 1: - spindle revolutions (max): 1475 /min - drive power: 55 kW GRINDING SPINDLE 2: - spindle revolutions (max): 1475 /min - drive power: 55 kW COMPONENT-FEEDER: - Feeder Design: rotary Feeder: DIMENSIONS / WEIGHTS: - space requirements -left/right-: 3850 mm - space requirements -front/back-: 2300 mm - total height: 1850 mm - total weight approx. ...

Category: 101: boring mills and machining centers
New in: 2007
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 904998 Number: 1 PCs. Manufacturer: SW (Swabian machine tools) Type: BA W06-22 Control: Siemens 840 D Year of manufacture: 2007 State of preservation: second-hand machine Stories about: 2-3 layers DESCRIPTION MILLING Travel in X 600 mm Travel in Y (875) 600 mm Travel in Z 500 mm Maximum rapid traverse in X/Y/Z 100/100/100 m / min Maximum acceleration in X/Y/Z 12/10/20 m / s2 Feed force in the X/Y/Z 10000/10000 / 2 Ã? 5000 N Direct measuring system X/Y/Z/A(U)/C1(C2)/W1(W2) Linear actuator x/Y/Z Tool holder HSK-A 63 Maximum speed milling spindle 17500 1/min Maximum power with ED 10-40 / 100% 35/26 kW Maximum torque at ED 10-40 / 100% 80 ...

Category: 104: grinding machines
New in: 1969
Price: request quote
Location: Canada
Seller: ProdEq Trading GmbH

grinding height: 15 mm grinding width: 235 mm grinding wheel diameter: 762 mm --------------------------------------------------: WORKING RANGE (DOUBLE DISC GRINDER): - Grinding wheel diameter: 762 mm - grinding width max. - throughfeed grinding: 235 mm - material thickness max. - throughfeed grindin: 15 mm GRINDING SPINDLE 1: - spindle revolutions (max): 1475 /min - drive power: 55 kW GRINDING SPINDLE 2: - spindle revolutions (max): 1475 /min - drive power: 55 kW COMPONENT-FEEDER: - Feeder Design: rotary Feeder: ELECTRICAL SPECIFICATIONS: - mains voltage: 380 V - mains frequency: 50 Hz DIMENSIONS / WEIGHTS: - space requirements -left/right-: 3850 mm - space requ ...

Category: 102: lathes
New in: 2017
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 905001 Number: 1 PCs. Manufacturer: Gildemeister Type: CTV 250 Control: Siemens 840 D SlimLine Year of constr.: 2017 State of preservation: second-hand machine Machine a (hours): 7,600 Spindle a (hours): 4,900 DESCRIPTION TURNING Axes X/Y/Z/C Maximum turning length 200 mm Maximum swing over bed cover 350 mm Maximum Chuck diameter 250 mm Max speed main spindle 5000 1/min Maximum performance main spindle in ED 10-40 / 100% 25 kW Maximum torque of main spindle in ED 10-40 / 100% 280 NM Main spindle spindle passage 57 mm Spindle diameter in front bearing spindle 120 mm Spindle flange size main spindle 170 h 5 Axes on the main spindle unit X/Z/C  ...

Category: 104: grinding machines
New in: 2018
Price: request quote
Location: Canada
Seller: ProdEq Trading GmbH

grinding height: 20 mm grinding width: 120 mm grinding wheel diameter: 600 mm --------------------------------------------------: WORKING RANGE (DOUBLE DISC GRINDER): - Grinding wheel diameter: 600 mm - grinding width max. - throughfeed grinding: 120 mm - material thickness max. - throughfeed grindin: 20 mm GRINDING SPINDLE 1: - spindle revolutions (max): 1019 /min - drive power: 48 kW GRINDING SPINDLE 2: - spindle revolutions (max): 1019 /min - drive power: 48 kW COMPONENT-FEEDER: - Feeder Design: rotary Feeder: - feeder velocity max.: 240 mm/min - feeder velocity min.: 20 mm/min ELECTRICAL SPECIFICATIONS: - total power consumption: 110 kW - mains voltage: 460 V ...

Category: 102: lathes
New in: 2017
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 905002 Number: 1 PCs. Manufacturer: Gildemeister Type: CTV 250 Control: Siemens 840 D SlimLine Year of constr.: 2017 State of preservation: second-hand machine Machine a (hours): 6,300 Spindle a (hours): 4,400 DESCRIPTION TURNING Axes X/Z/C Maximum turning length 200 mm Maximum swing over bed cover 350 mm Maximum Chuck diameter 250 mm Max speed main spindle 5000 1/min Maximum performance main spindle in ED 10-40 / 100% 25 kW Maximum torque of main spindle in ED 10-40 / 100% 280 NM Main spindle spindle passage 57 mm Spindle diameter in front bearing spindle 120 mm Spindle flange size main spindle 170 h 5 Axes on the main spindle unit X/Z/C T ...

Category: 104: grinding machines
New in: 2015
Price: request quote
Location: Canada
Seller: ProdEq Trading GmbH

grinding height: 20 mm grinding width: 120 mm grinding wheel diameter: 600 mm --------------------------------------------------: WORKING RANGE (DOUBLE DISC GRINDER): - Grinding wheel diameter: 600 mm - grinding width max. - throughfeed grinding: 120 mm - material thickness max. - throughfeed grindin: 20 mm GRINDING SPINDLE 1: - spindle revolutions (max): 1019 /min - drive power: 48 kW GRINDING SPINDLE 2: - spindle revolutions (max): 1019 /min - drive power: 48 kW COMPONENT-FEEDER: - Feeder Design: rotary Feeder: - feeder velocity max.: 240 mm/min - feeder velocity min.: 20 mm/min ELECTRICAL SPECIFICATIONS: - total power consumption: 110 kW - mains voltage: 460 V ...

Category: 101: boring mills and machining centers
New in: 2010
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 905003 Number: 1 PCs. Manufacturer: SW (Swabian machine tools) Type: BA W06-22 Control: Siemens 840 D Year of construction: 2010 State of preservation: second-hand machine Stories about: 2-3 layers DESCRIPTION MILLING Travel in X 600 mm Travel in Y (875) 600 mm Travel in Z 500 mm Maximum rapid traverse in X/Y/Z 100/100/100 m / min Maximum acceleration in X/Y/Z 12/10/20 m / s2 Feed force in the X/Y/Z 10000/10000 / 2 Ã? 5000 N Direct measuring system X/Y/Z/A(U)/C1(C2)/W1(W2) Linear actuator x/Y/Z Tool holder HSK-A 63 Maximum speed milling spindle 17500 1/min Maximum power with ED 10-40 / 100% 35/26 kW Maximum torque at ED 10-40 / 100% 8 ...

Category: 104: grinding machines
New in: 1978
Price: used machinery auction RESALE 2.900 €
Location: Land-pl PL Poland, 38-500 Sanok
Seller: Surplex GmbH

Weight approx.: 4800 kg Dimensions (l x w x h) approx.: 2400 x 1400 x 1600 mm Description: - electro magnet pole pitch: 12 mm - slewable till: 1° - grinding wheel: 330 x 285 x 90 mm - bore: 203 mm - automatic vertical feed - manual dresser

Category: 101: boring mills and machining centers
New in: 2009
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 905004 Number: 1 PCs. Manufacturer: SW (Swabian machine tools) Type: BA W06-22 Control: Siemens 840 D Year of manufacture: 2009 State of preservation: second-hand machine Stories about: 2-3 layers DESCRIPTION MILLING Travel in X 600 mm Travel in Y (875) 600 mm Travel in Z 500 mm Maximum rapid traverse in X/Y/Z 100/100/100 m / min Maximum acceleration in X/Y/Z 12/10/20 m / s2 Feed force in the X/Y/Z 10000/10000 / 2 Ã? 5000 N Direct measuring system X/Y/Z/A(U)/C1(C2)/W1(W2) Linear actuator x/Y/Z Tool holder HSK-A 63 Maximum speed milling spindle 17500 1/min Maximum power with ED 10-40 / 100% 35/26 kW Maximum torque at ED 10-40 / 100% 80 ...

Category: 101: boring mills and machining centers
New in: used
Price: used machinery auction RESALE 450 €
Location: Land-nl NL Netherlands
Seller: Surplex GmbH

Weight approx.: 25 kg Dimensions (l x w x h) approx.: 500 x 300 x 500 mm Description: Type E P1620.600

Category: 102: lathes
New in: 1996
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 905005 Number: 1 PCs. Manufacturer: TRAUB Type: TNC 65 DGY Control: Traub TX 8F Year of construction: 1996 (2011) State of preservation: second-hand machine Machine a (hours): 18,500 Stories about: 1 layers DESCRIPTION TURNING Maximum turning diameter 300 mm Maximum turning length 450 mm Maximum swing over bed cover 480 mm Maximum Chuck diameter 175 mm Max speed main spindle 5600 1/min Maximum performance main spindle in ED 10-40 / 100% 18.5 kW Main spindle spindle passage 65 mm Spindle flange size A6 main spindle Axes on the main spindle unit C Hollow clamping cylinder to the main spindle Maximum rotation speed 5600 1/min spindle Maximum p ...

Category: 101: boring mills and machining centers
New in: used
Price: used machinery auction RESALE 450 €
Location: Land-nl NL Netherlands
Seller: Surplex GmbH

Weight approx.: 25 kg Dimensions (l x w x h) approx.: 500 x 300 x 500 mm Description: Type E P1620.600

Category: 101: boring mills and machining centers
New in: 2001
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 905006 Number: 1 PCs. Manufacturer: STAMA Type: MC 531 / S Control: Fanuc 18i M Year of construction: 2001 State of preservation: second-hand machine Stories about: 1 layers DESCRIPTION MILLING Travel in X 1600 mm Travel in Y 400 mm Travel in Z 350 mm Maximum rapid traverse in X/Y/Z 45/45/45 m / min Maximum feed speed in X/Y/Z 10/10/10 m / min Maximum acceleration in X/Y/Z 3/7/12 m / s2 Feed force in the X/Y/Z 7000/7000/12000 N Direct measuring system X/Y/Z Tool holder HSK 63 Maximum speed milling spindle 9000 1/min Maximum power with ED 10-40 / 100% 48/14 kW Maximum torque at ED 10-40 / 100% 154/45 nm Spindle diameter in front bearing 65 m ...

Category: 103: milling machines
New in: used
Price: used machinery auction RESALE 150 €
Location: Land-nl NL Netherlands
Seller: Surplex GmbH

Weight approx.: 50 kg Dimensions (l x w x h) approx.: 450 x 250 x 250 mm Description: Tiltable and rotatable, Jaw width 160 mm, jaw height 50 mm, clamping hole 185 mm

Category: 102: lathes
New in: 2007
Price: request quote
Location: Land-cz CZ 61600 Brno, Králova 279/9
Seller: KAXIMA International, s.r.o.

n very good technical condition. Built in 2007. Control: HEIDENHAIN CNC PILOT 4290. Maximum turning diameter: 445 mm, length 1000 mm, maximum diameter 380 mm, clamping feed 3000 mm. 12 tools of which 6 x drive. Working hours: 7855 Machine weight: 9.000 kg

Category: 202: milling machines
New in: used
Price: used machinery auction RESALE 350 €
Location: Land-de DE Germany, 74626 Bretzfeld
Seller: Surplex GmbH

Weight approx.: 500 kg table length: 1150 mm Dimensions (l x w x h) approx.: 1200 x 1000 x 1300 mm spindle diameter: 30 mm table depth: 850 mm Description: - Table dimensions 1150 mm x 850 mm - 4 Spindel speeds - left / right rotation - Without feed unit

Category: 102: lathes
New in: 2017
Price: request quote
Location: Land-cz CZ 61600 Brno, Králova 279/9
Seller: KAXIMA International, s.r.o.

Manufacturer MAZAK Year 2017 Mazatrol smart control system Maximum swing diameter of 580 mm Chuck size 8" Bar passage 51 mm Centering spindle axis 1 020 mm MAIN SPINDLE Max speed 4000 U / min Motor power 11.0 kW Maximum torque 131 NM Number of stations on the drum revolver 8 Driver 25 mm Bohrstangenschaftdurchmesser max 32 mm Indexing time (a step) 0.20 s Rapid traverse (x) 30 m / min Rapid traverse (Z axis) 30 m / min Range (X-axis) 140 mm Range (Z axis) 305 mm Content of the cooling container 160 L Performance (30 minutes load) 20,16 kVA Power consumption (continuous) 20.2 kVA ACCESSORIES Transformer type Setting tools Ankerpads 8-position drum head (bolt typ ...

Category: 101: boring mills and machining centers
New in: 2000
Price: used machinery auction RESALE 1.400 €
Location: Land-nl NL Netherlands
Seller: Surplex GmbH

Weight approx.: 160 kg Dimensions (l x w x h) approx.: 1200 x 800 x 700 mm Description: Table diameter 200 mm, Center height 140 mm, passage 40 mm, product weight on the table vertical 80 kg, vertical with countercenter 160 kg, horizontal 160 kg with countercenter and Macmini control

Category: 102: lathes
New in: 2018
Price: request quote
Location: Land-cz CZ 61600 Brno, Králova 279/9
Seller: KAXIMA International, s.r.o.

Manufacturer: MAZAK Year of construction: 2018 Machine control: Mazatrol SmoothC CNC Bed 250 mm (universal) Maximum spindle rotation speed 4000 min-1 Main spindle power 11 kW Main spindle feed 8 "by Chuck B 218A0615 (51 mm round) Standard accessories: Transformer type SD memory interface (1 port) + (1 port) USB interface setting tool Tool holder set (6) Coasters for anchoring 8-position drum head (bolt type)

Category: 101: boring mills and machining centers
New in: 2003
Price: used machinery auction RESALE 1.800 €
Location: Land-nl NL Netherlands
Seller: Surplex GmbH

Weight approx.: 220 kg Dimensions (l x w x h) approx.: 1200 x 800 x 1000 mm Description: Table diameter 320 mm, Center height 225 mm, passage 100 mm, Vertical product weight 180 kg with Mac-Mini controller

Category: 102: lathes
New in: 2014
Price: request quote
Location: Land-de DE 33758 Schloß Holte-Stukenbrock, Altenkamp 7
Seller: Spantech GmbH

Manufacturer: DMG type: CTX 450 eco V3 Year of constr.: 2014 control: Siemens 840 D swing above bed: 650 mm travel plan: 267 mm Longitudinal travel: 600 mm Speed range from - until:-4000 RPM Approximate weight: 5,800 kg equipment Axles: 3 driven tools: 12 hollow clamping device: Yes tailstock: Yes Quill stroke automatic: Yes Chip conveyor: Yes Accessories: Rod package + interface Workpiece pick-up facility Connecting rod loader Bar passage diameter. 65 Subject to error and sale.

Category: 102: lathes
New in: 1997
Price: used machinery auction RESALE 4.200 €
Location: Land-nl NL Netherlands
Seller: Surplex GmbH

Weight approx.: 5600 kg Dimensions (l x w x h) approx.: 4530 x 2005 x 1865 mm Description: Rotation diameter over bed 710 mm, turning diameter over support 410 mm, turning diameter in bag 760 mm, bed width 550 mm, opening in spindle 92 mm center length 2000 mm, 3 speed spindle speeds 16-1800 rpm, spindle motor 22 kW, torque 2750 Nm, Automatic power supply up to 5000 mm / min. with fixed eyewear ø 180-320 mm, Parat quick change tool holder with chisel blocks, Interactive contour control Manual Plus (Grundig) and complete set of machine books

Category: 102: lathes
New in: used
Price: request quote
Location: Land-cz CZ 62700 Brno, Tu?anka 104 Tu?anka 104
Seller: Herr Radek Procházka

Control Siemens... 802 D si Turning diameter... 1600mm Turning length... 12000mm Spindle bore... 110mm Power of main engine... 99, 5kW In very good condition, possible to try out under power.

Category: 107: sheet metal working
New in: 1996
Price: request quote
Location: Land-de DE Germany, 04895 Falkenberg
Seller: Surplex GmbH

Weight approx.: 19000 kg Dimensions (l x w x h) approx.: 8000 x 2500 x 2400 mm Description: Max. working range without repositioning 2500 x 1300mm max. tool weight 150 kg max. stroke sequence 9001/min max. sheet thickness 8 mm max. punching force 220 kN max. punching diameter 76.2 mm number of tool places 20 pcs. tool changer with 40 places including Trumalift Sheetmaster machine number 040915 YOM 1996 program version SM 1300V 405 including scissors lift table, tools will be sorted out installation dimensions 15000 x 8000 x 2900 mm Machine has been started in running operation. Machine tools are assigned at the end of production, The machine must be collected by calendar week 51 at the lat ...

Category: 403: labeling machines
New in: 2006
Price: request quote
Location: Land-fi FI 00980 Helsinki, Itakatu 1-5, 3rd Floor
Seller: JADE Trading OY

Labeler SIDEL Alfa Rollquatro F 25 Hot Melt Glue with auxiliaries This Alfa Rollquatro labeler was installed in 2006 and it was operated time to time till 2014 total operating hours not exceeding 10 000 hours! Rollquattro is a rotary wraparound labeler equipped with an ergonomically designed, robust and precise linear labeling station with place for two rolls of film labels. Label is attached to bottle with two hot melt glue stripes. Label platforms are teethed belt driven via single servo motor. This labeler has HH2 configuration which enables improved flexibility in handling bottles of different sizes and greater reliability for small bottles at very high speeds. Labeler is still insta ...

Category: 205: boring mills, machining centers
New in: 2017
Price: used machinery auction RESALE 7.500 €
Location: Land-ro RO Romania, 077025 Bragadiru
Seller: Surplex GmbH

Weight approx.: 1000 kg Dimensions (l x w x h) approx.: 1850 x 1900 x 1750 mm Description: - Feed: 25 m / min - drilling depth: 50 mm - width max. working: 800 mm - motor power: 2.2 kW - rotations: 3400 rpm - 7 vertical drives with 0-800 mm drive for each chuck - 1 front-mounted horizontal chuck - circular saw blade - max. 800 mm plate - 3-axis numerical control (XYZ) - installed power 2.5 kW - working pressure 6 bar - working speed on axes-25 m / min - drills are operated independently or simultaneously without the need to replace the drill

Category: 409: other packaging machinery
New in: 2005
Price: request quote
Location: Land-fi FI 00980 Helsinki, Itakatu 1-5, 3rd Floor
Seller: JADE Trading OY

Unscrambler Lanfranchi for PET Bottles 12 000 bph Complete never installed PET bottle unscrambler system made by Italian Lanfranchi in year 2005 - still in original delivery boxes. It is designed for 8 oz (0.237 liters), 20 (0.591 liters) and 33.8 oz (1.0 liters) PET bottles with the production capacity of 12000 bph. The delivery includes complete unscrambling system as follows: Rotating Unscrambler - Model Lift Master L1 STD 20-22 - Superior opening cover - Vacuum Transfer star wheel at machine exit - Speed control photocells at machine exit - Electrical control cabinet in stainless steel with A/B components and UL certified - No.1 set of handling parts for 0.237 and 1,0 l bottl ...

Category: 818: presses: other
New in: 2000
Price: 3.950 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG

Screen printing machine, screen printing machine, stencil printer, rotary screen printing machine, coating machine, coating machine, automatic coating machine, screen coater -Screen printing machine for round printing -Printing machine for cups, cups round containers -Dimensions 995/690 / H1620 mm -Weight 216 kg

Category: 401: filling machines
New in: 2000
Price: request quote
Location: Land-fi FI 00980 Helsinki, Itakatu 1-5, 3rd Floor
Seller: JADE Trading OY

Glass Bottle Filling Line KRONES one way 54.000 bph Complete line for bottling beer, carbonated and non carbonated soft drinks in one way glass bottles at nominal capacity of 54 000 bph. It was delivered by Krones in year 2000 and it was in operation till 2015 and is currently installed and powered. Equipment is very well maintaned and it has a complete techncial documentation in English. Main Characteristics - Capacity 54 000 bph at 0.33 liter bottles - Made by Krones in year 2000, in operation till 2015 still installed - Bottle volumes 275, 330 ml and earlier also 660 ml bottles - Total operating hours approx 70.000 - One way line for new glass bottles - Secondary packaging K ...

Category: 101: boring mills and machining centers
New in: 2014
Price: request quote
Location: Bayern, Pfronten
Seller: VIG CNC & Werkzeugmaschinen

x-travel:1250 mm y-travel:1250 mm z-travel:1000 mm tool magazin::120 tool taper:HSK-A 100 Rotary-table:1100 mm speed of turning table:500 U/min set of change pallet:2 Stück A-Axis:HSK-A 100 number of spindle speeds:12.000 U/min Power of spindle (motorspindle):52 / 430 kW / Nm :3000/3800 Watt(Heiz-/Kühlleistung) Control for loadingstation:Siemens(TFT 8\") dimensions of the machine ca.:31 m weight of the machine ca.:21,5 t connected load:100 kW amperage - max.:160 A mode of operation:4 Number of working hours:370 h Working spindel hours:112 h FD-spindle hours:50 h measuring probe:Renishaw PowerProbe 60 optical (OMP 60) HSK-A 100 :BLUM - LaserControl NT-H 3D :40 bar spray gun:1 bar 3D quicks ...

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: Land-in IN 40070 New Mumbai, W-381, MIDC Rabale, TTC Industrial Area W-381, MIDC Rabale, TTC Industrial Area
Seller: Syndicate Machines Pvt. Ltd.

Union Machine Name Horizontal Boring Machine Manufacturer Union Model BFP 1602 Location Mumbai Year Of Manufacturing NA Technical Specification Spindle 160mm X 7000mm Y 3000mm Rotary Table 3000mm X 2500mm

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

type Rotamat CN 30, 30 pcs., 30 - 70 g\r\ninclude 3 moulding plates\r\n

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: Land-in IN 40070 New Mumbai, W-381, MIDC Rabale, TTC Industrial Area W-381, MIDC Rabale, TTC Industrial Area
Seller: Syndicate Machines Pvt. Ltd.

TOS Machine Name : Horizontal Boring Machine Manufacturer : TOS Model : WHN 13A Location : MUMBAI Year Of Manufacturing :NA Technical Specification: Spindle Diameter: 130 Mm Spindle Taper: ISO 50 Rotary Table: 1600x1800 Mm X Axis: 2300 Mm Y Axis: 1900 Mm W Axis: 1250 Mm Z Axis (Spindle Travel): 800 Mm Spindle Speed: 12,5-800 Rpm Max. Table Loading: 12 Tons Machinery Weight: 36 Tons

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

computer control, baking-chamber for 1 rack\r\nrotating rack, for plates 580 x 780 mm,\r\ncomplete assembled loaded\r\n\r\n

Category: 101: boring mills and machining centers
New in: 1994
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

X-travel: 1000mm, y-travel: 500mm, z-travel: 700mm, number of tool slots: 24, tool cone: ISO 50, quill stroke: 100mm, rotational speed: 20-3200/min, controls: PHILLIPS 432, length: 3265mm, width: 4080mm, height: 2388mm, weight: 7.3t.

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

30 pcs., 30 - 70 g\r\ninclude 3 moulding plates

Category: 403: labeling machines
New in: 2005
Price: request quote
Location: Land-fi FI 00980 Helsinki, Itakatu 1-5, 3rd Floor
Seller: JADE Trading OY

Wrap-around Labeling Machine Krones Canmatic 960-28 52800 bph This machine was installed in 2005 and it is still running and available in September 2016. Total running hours today being around 40 000. The labeler is currently working with 0.5, 0.6 and 1.5 liter PET bottles with pre-cut wrap-around polypropylene labels. Label material is polypropylene which was attached with two stripes of hot glue on both end of the label. Labeler has one precut label feeding station and two hot glue stations and 28 container stations. Container rotating is made with teethed plastic belt. Technical data Machine manufacturer: Krones AG Manufacturer's type: Canmatic 960 - 28 Year of manufacturing: 200 ...

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

baking-chamber for 1 rack for plates 600 x 800 mm\r\nrotating rack\r\n

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)