rota used for sale

Rotary union, 8 channels, Rotopack MC, GAT, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. New! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition. For 8 channels Up to 450 bar For oil, air, emulsion, water, gases, rough, fine vacuum Max 500rpm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Reversible clamp, rotary table, dividing apparatus PEISELER type 20.0000 No. 715 Table diameter: 500 mm Index pitch: 24 (15 )Bore in the middle of the table: 63 mm- readable degree scaling on the rotary table - lever for brake and snap-in pin - 20 mm T- slots - rotatable by hand or drive via center pin Dimensions L x W x H: 650 x 580 x 320 mm Weight: 230 kg good condition ; used

Welding turntable - welding turning device with housing Load capacity approx. 50 kg Lathe chuck diameter 300 mm Chuck speed 1.0-15 rpm. Mains connection 230 Volt, 50 Hz - Flat spiral lathe chuck with inwardly stepped chuck jaws - Speed control infinitely variable via potentiometer- Drive via gear motor, direction of rotation left - Start via electric switch - Welding current transmission with sliding contact - Suction connection 160 mm- Interior lighting door opening W x H 715 x 1060 mm Interior dimensions W x D x H 780 x 780 x 1100 mm Space requirements W x D x H 900 x 900 x 2300 mm weight 190 kg; used

Rotary table with aluminium substructure System profile BOSCH REXROTH Aluminium System profile turntable under the superstructure: 220 mm Base plate Steel turntable L x W x H: 760 x 760 x 20 mm Height only turntable: 70 mm (base plate to turntable upper edge)Frame profile aluminium: 60 x 90 mm - very stable mounted rotary table, rotatable by hand - turntable with position query via electric position switch for 1 position structure made of aluminium (orange lacquered) - sturdy substructure made of ALU system profile - 2 pieces index latching positions manually with hand lever for detrasten - height-adjustable feet for alignment Dimensions base: L x W x H 760 x 760 x 800 mm Space required L x W x H: 1000 x 950 x 1560 Weight: 335 kg good condition 2 pieces available, price per piece; used

Vacuum pump, airframe pump, rotary vane pump ALCATEL type 100-132 Fabr. No. 173082 - 3101 Year of construction: approx. 1995 Volume flow: approx. 50 m3/h Negative pressure: 0.5 mbar (indicated on the type plate)Negative pressure: - 0.9 bar (determined during test run) Motor power: 3 kW Motor speed: 1420 rpm. Mains connection: 400 Volt, 50 Hz - Oil-lubricated rotary vane pump Dimensions L x W x H: 700 x 420 x 310 mm Weight: 78 kg good condition; used

Rotary indexing machine Special machine with several assembly stations Hydraulic press + spot welding machine + much more Production and assembly system in rotary transfer process for front panel AC-DC connection plates rotary indexing machine manufacturer: AKE-technologies GmbH Serial number: 01-45-064 Number of mandate: 11111 Year of construction: 2012 - large rotary indexing table - pressing station with TOX power pack - 2 welding stations for resistance welding - several vibation conveyors - conveyor belts - testing station space requirement L x W x H approx. 3500 x 2750 x 2300 mm net weight approx. 4000 kg; used

Rotary filling machine to fill liquids, pastes, powder, bulk goods into pre-made cups and sealing them with film. The machine can be equipped with a module for capping the cups with a hard plastic/hard shell lid (at a surcharge). The AMTEC filling and sealing machine can handle different cup types, shapes and dimensions and is flexible in the type of product to be filled. The product must only have flow properties such as yoghurt, dessert, sour cream, finger food sauces, smoothies, solid and dry foods such as rice, nuts, cereals, instant noodles and fresh foods such as sauerkraut, etc. Automatic operation from feeding of cups, filling, opening of cups, sealing with foil (capping with a lid, optional), collecting of cups / containers. The dosing unit (e.g. volumetric pump with an external tank, auger filler, etc.) is included. Easy operation due touch screen monitor. - Specifications: max ...

Automatic filling and sealing machine for filling cups or containers, sealing with foil and capping with a hard plastic/hard tray lid. The rotary filling machine is suitable for various product types from liquids, pastes and powder to granular bulk materials such as yoghurt, dessert, sour cream, finger food sauces, smoothies, solid and dry foods such as rice, nuts, cereals, instant noodles and fresh foods such as sauerkraut, etc. The dosing unit is selected accordingly. The Shape, dimensions and material of the cups and lids can be customized (within the range). Automatic operation from feeding of cups, filling, opening of cups, sealing with film, capping with a lid and outfeed of the cups / containers. - Specifications: max. speed of the machine in neutral: 50 cycles/minute | filling volume: customized | cup/container dimensions: customized | number of filling heads: max. 2 | product co ...

Automatic rotary cup or container filling system for liquids including dosing unit and sealing module for the lidding film. Suitable for products with flow characteristics, various container sizes, shapes and materials (e.g. PP, PS, PET, Paper, laminated films, etc.). Automatic operation from drop cup, filling to sealing. 2 cups / containers will be handled per cycle. Touch screen for easy operation, stainless steel version, easy cleaning. Print mark sensor. Customizable mould for container allows a wide range of sizes/shapes. - Specifications: filling capacity: customized | max. speed of the machine in neutral: 80 cycles/minute | power: 220V / 380V, 2kW | machine dimensions: L1100xW1100xH1600m | weight: approx. 400kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below t ...

New model Auto Rotary Plastic Container Feeding, Filling, Sealing and Capping Machine for larger cup/container sizes. - Functions: The cup/container stacks are being put manually into the vertical storage device. Each cup/container will be picked automatically and transfered to the filling station (dosing unit is optional). Film is supplied to seal the cup/container before a capping unit closes it with a cap. Finally outfeed of the finished cup/container. - Stainless steel version (SS304), nitrogen filling device included, heat sealing system (0-300?C), film cutting depending on box shape. Servo motor control, OMRON PLC with Touchscreen, OMRON temperature control. - Specifications: max. speed of the machine in neutral: 20 cycles/minute | power 220V, 1.5kW | compressed air: 6bar, 1.2m?/min | machine dimensions and weight: depending on final customized configurations. That machine/system i ...

Automatic rotary cup or container filling system including film sealing module. - Suitable for different container sizes, shapes and materials (e.g. PP, PS, PET, Paper, laminated films, etc.). Perfect to pack instant food, noodles, pasta, dried fruit, snacks, candies, chocolate, soup powder, frozen food, yogurt, ice cream, jelly, etc.. Automatic operation from drop cup, filling to sealing. Suitable for all kind of (separate) dosing systems for liquids, pastes, granules, powder, etc.. Touch screen for easy operation, stainless steel version, easy cleaning. Print mark sensor. Customizable mould for container allows a wide range of sizes/shapes. - Specifications: number of working stations: 12 | max. speed of the machine in neutral: 20 cycles/minute | power: 220V, 2.1kW | compressed air: 0,1m?, 6bar | machine dimensions: L900xW850xH1600mm. That machine/system is available in different versi ...

Automatic rotary cup or container filling system including film sealing module. - Suitable for different container sizes, shapes and materials (e.g. PP, PS, PET, Paper, laminated films, etc.). Perfect to pack instant food, noodles, pasta, dried fruit, snacks, candies, chocolate, soup powder, frozen food, yogurt, ice cream, jelly, etc.. Automatic operation from drop cup, filling to sealing. Suitable for all kind of (separate) dosing systems for liquids, pastes, granules, powder, etc.. Touch screen for easy operation, stainless steel version, easy cleaning. Print mark sensor. Customizable mould for container allows a wide range of sizes/shapes. - Specifications: number of working stations: 8 | max. speed of the machine in neutral: 20 cycles/minute | power: 220V, 1.5kw | compressed air: 0,1m?, 6bar | machine dimensions: L950xW870xH1600mm. That machine/system is available in different versio ...

Automatic rotary cup or container filler. Suitable for different container sizes, shapes and materials. Perfect to pack instant food, noodles, pasta, dried fruit, snacks, candies, chocolate, soup powder, frozen food, yogurt, ice cream, jelly, etc. Automatic operation from cup feeding and filling, lid feeding and container closing. Suitable for all kind of (separate) dosing systems for liquids, pastes, granules, powder, etc. Touch screen for easy operation, stainless steel version, easy cleaning. Customizable mould for container allows a wide range of sizes/shapes. - Specifications: max. speed of the machine in neutral: 16 cycles/minute | power: 380V, 50Hz, 4kW | compressed air and consumption: 6-8bar, 0,6m?/min | machine dimensions: L1000xW1000xH1650mm | weight: 350kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your pack ...

Filling and capping machine for filling liquids and pastes into stand-up pouches (doypacks) with spout. Suitable for premade doypacks with a corner spout or a spout on top. The rotary machine has filling units equipped with two filling heads each for liquid filling and two heads each for positioning and closing the spout lids. Additional equipment: feeding lift for the spout caps, external module for CIP cleaning, air cleaning system for inner area of the machine. Relevant electronic components from Schneider and Omron, PLC and touch screen from SIEMENS, pneumatic components from AIRTAC. - Specifications: Filling range: max. 3000ml | number of filling heads: 6 | max. number of machine cycles in neutral: 26 cycles/min | current: 220/380V, 2.5kW | air pressure and consumption: 5-7bar, 0.7m? | machine dimensions LxWxH: 2600x1630x1900mm | weight: 1600kg. Please note that our new prices are o ...

Filling and capping machine for filling liquids and pastes into stand-up pouches (doypacks) with spout. The rotary machine is especially used for filling all kinds of liquids such as water, juices, sauces such as soy sauce, salad dressings, tomato sauce or liquids with high viscosity such as barbecue sauces/BBQ sauces, honey, up to pasty products such as peanut butter, fruit jam, nut nougat cream etc. The filling and capping machine is equipped with six filling heads for liquid filling and with six heads each for positioning and capping the spout caps. The production process is fully automated from bag feeding, filling, cleaning the spouts, feeding the spout caps via lift and capping them, to the output of the final products. To ensure the exact filling volume, the liquid level is constantly monitored. PLC control, touch screen operating monitor (menu available in different languages e.g ...

Filling and capping machine for filling liquids and pastes into stand-up pouches (doypacks) with spout. The rotary machine is especially used for filling all kinds of liquids such as water, juices, sauces such as soy sauce, salad dressings, tomato sauce or liquids with high viscosity such as barbecue sauces/BBQ sauces, honey, up to pasty products such as peanut butter, fruit jam, nut nougat cream etc. The filling and capping machine is equipped with six filling heads for liquid filling and with six heads each for positioning and capping the spout lids. The production process is fully automated from bag feeding, filling, cleaning of the nozzles, feeding the spout lids via lift and capping them, to the output of the final products. To ensure the exact filling volume, the liquid level is constantly monitored. PLC control, touch screen operating monitor (menu available in different languages ...

Filling and capping machine for filling liquids and pastes into stand-up pouches (doypacks) with spout. Suitable for premade doypacks with a corner spout or a spout on top. The rotary machine has two filling heads for liquid filling and two heads each for positioning and closing the spout lids. Additional equipment: feeding lift for the spout caps, external module for CIP cleaning, air cleaning system for inner area of the machine. Relevant electronic components from Schneider and Omron, PLC and touch screen from SIEMENS, pneumatic components from AIRTAC. - Specifications: Filling range: max. 500ml | number of filling heads: 2 | max. number of machine cycles in neutral: 16 cycles/min (corresponds to max. 33 bags/min) | current: 220V, 1.5kW | air pressure and consumption: 5-7bar, 0.65m? | machine dimensions LxWxH: 1990x1300x1980mm | weight: 1500kg. Please note that our new prices are ofte ...

Premade pouches packaging/filling and closing machine, rotary operation with 8 working positions. Suitable for flat pouces and doypack style pouches with/without zipper or spout. Easy operation through touch screen and SIEMENS PLC, frequency conversioin for speed adjustment, no-pouch- (or no open pouch) no-filling/seal function. Motorized bag width adjustment, oil free plastic bearings, all product or bag contacting parts are made of stainless steel (SS304). Can be used with all kinds of infeed/dosing modules (optional) to pack granulate like products, liquids, pastes, powdes, etc. Suitable for a wide range of film materials like compound/monolayer PE, PP, paper, etc. (please ask for details). Bag infeed vertically with hopper (for flat bags), optionally: horizontally infeed, especially for zipper or spout bags. Sucking unit to open all kind of bags with thinner film material. Suitable f ...

Premade pouches packaging/filling and closing machine, rotary operation with 8 working positions. Suitable for flat pouches and doypack style pouches with/without zipper or spout. Easy operation through touch screen and SIEMENS PLC, frequency conversioin for speed adjustment, no-pouch- (or no open pouch) no-filling/seal function. Motorized bag width adjustment, oil free plastic bearings, all product or bag contacting parts are made of stainless steel (SS304). Can be used with all kinds of infeed/dosing modules (optional) to pack granulate like products, liquids, pastes, powdes, etc. Suitable for a wide range of film materials like compound/monolayer PE, PP, paper, etc. (please ask for details). Bag infeed vertically with hopper (for flat bags), optionally: horizontally infeed, especially for zipper or spout bags. Sucking unit to open all kind of bags with thinner film material. Suitable  ...

Premade pouches packaging/filling and closing machine, rotary operation with 6 working positions. Suitable for flat pouches and doypack style pouches. Easy operation through touch screen and SIEMENS PLC, frequency conversioin for speed adjustment, no-pouch- (or no open pouch) no-filling/seal function. Motorized bag width adjustment, oil free plastic bearings, all product or bag contacting parts are made of stainless steel (SS304). Can be used with all kinds of infeed/dosing modules (optional) to pack granulate like products, liquids, pastes, powdes, etc. Suitable for a wide range of film materials like compound/monolayer PE, PP, paper, etc. (please ask for details). Bag infeed vertically with hopper (for flat bags), optionally: horizontally infeed. Sucking unit to open all kind of bags with thinner film material. Suitable for the following bag dimensions: L(200-450)xW(200-300)mm. - Techn ...

Premade pouches packaging/filling and closing machine, rotary operation with 6 working positions. Suitable for flat pouches and doypack style pouches. Easy operation through touch screen and SIEMENS PLC, frequency conversioin for speed adjustment, no-pouch- (or no open pouch) no-filling/seal function. Motorized bag width adjustment, oil free plastic bearings, all product or bag contacting parts are made of stainless steel (SS304). Can be used with all kinds of infeed/dosing modules (optional) to pack granulate like products, liquids, pastes, powdes, etc. Suitable for a wide range of film materials like compound/monolayer PE, PP, paper, etc. (please ask for details). Bag infeed vertically with hopper (for flat bags), optionally: horizontally infeed. Sucking unit to open all kind of bags with thinner film material. Suitable for the following bag dimensions: L(100-350)xW(100-210)mm. - Techn ...

Sheet thickness: 2,00 mm Sheet diameter: 2 mm Knife diameter: 0 mm BMS - KSA 1500 x 2.0 Decoiler for coils up to 1500 mm Straightner with 9 rolls adjustaable to 0.2 -  2 mm Slitting roll with 3 knive blades Cutting plate shear up to 2 mm Positioning & Feed & Speed controller Maximum sheet thickness:2mm Length:                4500mm Width:                 2000mm Height:                1600mm Weight:                4000kg

Elmo Rietschle oil-lubricated rotary vane vacuum pump complete with 15 kW/50Hz 3~motor, 700 m³/h, 0.10 mbar(abs), completely overhauled

Regal RP12/T twin head rotary filling machine suitable for coleslaw and potato salad type products into square containers. The anticipated production speed is between 60 - 65 containers / minute. The machine will also be capable of running rectangular pots in the future, although an additional set of change parts will need to be purchased. 1.1.1 – PRODUCT SPECIFICATION DETAILS Machine Layout Container Dispense: A twin head positive separation container dispense complete with vacuum assist pull-out arms, to dispense 2 containers each index into the rotary table. The stack will have its own container detection system which will initiate the shift register on the machine. Container Detection: Container detection will be done on the station after the de-nester via 2 visual sensors. Filling Assembly: A twin head, volumetric filling assembly suitable for filling coleslaw and p ...

ROTARY TABLE MILLING MACHINE Condition Used Very good condition Control type Selca S4040-D Table length 1.600 mm Table width 1.200 mm X axis stroke 2.500 mm Y-axis stroke 1.700 mm Z axis stroke 1.500 mm Rapid 40 mt/min Rotational speed 4,000 rpm Spindle power 17 Kw Internal diameter front bearing. Ø 90 mm Oil spindle bearing lubrication Oil spindle line cooling, closed circuit with air conditioner

Centrifugal pump Manufacturer Fristam Type FZ 17 KF Serial number 54042050 Power 3,0 kW Speed 1,430 rpm Inlet DN 50 Outlet DN 50 Explosion protection Mobile, switches and cables, bypass and hoses

Centrifugal pump Manufacturer Hilge Type Euro Hygia I Adapta Serial number 22/04/138796 Flow rate 6 m³ Head 39 m Power 3,0 kW Speed 2,900 rpm Inlet DN 40 Outlet DN 30 Flange connection Frequency converters Enclosure drain Pharmaceuticals, WFI Water

offer 15107 Specifications: - Total load capacity driven + rotating unit 60000 kg - Payload per container device 30000 kg - Workpiece diameter 500 - 4000 mm - Axle distance of the support rollers adjustable - Steel support rollers - Roll diameter 650 mm - Roll width 200 mm - infinitely adjustable rotational speed - Handheld remote control for re- and li. run - Drive 400 V - Space requirements Unit approx. W 5100 x H 1000 x D 1500 mm - Platzb. with running unit approx. W 3500 x H 1000 x D 1000 mm - Weight applied Unit approx. 4500 kg - Weight with running unit approx. 3300 kg

WMW cylindrical grinding machine B0pedtl283 Type SA(U) 200x800 Grinding diameter approx. 220mm Grinding length approx. 800mm Infinitely variable speed regulation/headstock Coolant device Grinding wheel puller Work lamp Various grinding wheels and disc flanges Dimensions approx. LxWxH 3x1.5x1.7 meters Weight approx. 3000kg

Table diameter: 3000 mm Table load: 40 t X - axis stroke: 3000 mm Rotary tableSCHIESS FRORIEP - DV 45  Table Length:        3000mm Table Width:         3000mm Table load:          40000 Movement V-axis:     1600mm Rotation B-Axis:     360000° Rotation speed B-Axis:100 Grad/MinOmw/min. Movement speed V-axis:4500mm/min. Length:              5320mm Width:               3000mm Height:              1080mm Weight:              24000kg

1 POLYTEX pinking machine type ZO-30, cutting width 300 mm, machine supplied with 2 cutting knives: 1 new serrated knife with 4 mm serration gauge, 1 flat straight knife table size 605 mm x 315 mm, manual actuation

1 KAPPA pinking machine type 41L, cutting width 410 mm, machine supplied with 3 cutting knives: 1 serrated knife with 4 mm gauge serration installed, 1 serrated knife with 4 mm gauge serration spare, 1 flat straight knife, table size 900 mm x 435 mm, manual actuation

1 POLYTEX pinking machine type ZP (Zigzag cutting), knife width 1020 mm, stroke up to 65 mm height, up to 50 cuts per minute, machine equipped with precise hand lever feed mechanism, serrated knife with 5 mm gauge serrations, with FASNACHT security light guards, with laser cut indicator, motor power 2,2 kW, 3 x 380 V, 50 Hz, machine in immaculate condition as you can observe in the attached pictures.

1 IMPERIA pinking machine type E800 (Zigzag cutting), knife width 830 mm, working width up to 800 mm, machine equipped with precise hand lever feed mechanism, serrated knife with 5 mm gauge, with security light guards, 3 x 380 V, 50 Hz, 2.2 kW machine with setting for 2 pattern dimensions (normally supplied with 1 only), machine delivered with total 2 knifes: 1 knife installed with gauge 5 mm, 1 knife spare 5 mm gauge, machine delivered with 2 new cutting boards (one to be used and one as spare)

PAL FP8 Rotary filler Serial: FP8MC00016 2016, The FP8 is a compact rotary filling and closing machine. Whilst fully automatic in its operation this is a simple and flexible machine to use. It can seal a pre-cut or reel fed lid to a pre-formed pot with production speeds of up to 55 pots per minute, depending on the product consistency and fill volume. Product changeovers are quick and easy due to light, simple to change table quadrants and pre-set recipes in the HMI screen.

PAL FP8 Rotary filler Serial: FP8MC00024 2017, The FP8 is a compact rotary filling and closing machine. Whilst fully automatic in its operation this is a simple and flexible machine to use. It can seal a pre-cut or reel fed lid to a pre-formed pot with production speeds of up to 55 pots per minute, depending on the product consistency and fill volume. Product changeovers are quick and easy due to light, simple to change table quadrants and pre-set recipes in the HMI screen.

Technical data approx.: - Total load capacity driven + rotating unit 25000 kg - Payload per container device 12500 kg - Workpiece diameter approx. 500 - 4000 mm - Axle distance of the support rollers adjustable - Roll diameter 400 mm - Roll width 120 mm - infinitely adjustable rotational speed - Handheld remote control for re- and li. run - Drive 400 V - Space requirements Unit approx. W 3500 x H 850 x D 1000 mm - Platzb. with running unit approx. W 2700 x H 850 x D 800 mm - Weight applied Unit approx. 1300 kg - Weight with running unit approx. 900 kg

Table diameter: 3500 mm Table load: 40 t X - axis stroke: 3500 mm Rotary tableSCHARMANN - TDV 40  Transportable rotary indexing table T Jump 250 mm T Size Equipped for crculair milling  Seperate control opperator panel Heidenhain digital readout indexing position Table Length:  3500mm Table Width:   3500mm Table load:    40000 Rotation B-Axis:360000° Length:        4800mm Width:         3900mm Height:        930mm Weight:        29000kg

Technical data approx.: - Total load capacity 2000 kg - Payload per container device 1000 kg - Steel support rollers - Axle distance of the support rollers 130 - 580 mm - Axle distance left + right adjustable in 6 grids - Roll diameter 80 mm - Roll width 120 mm - height-adjustable working height by threaded spindle - min. / max. working height 650 / 950 mm - Space requirement approx. W 750 x H 950 x D 650 mm - Weight approx. 120 kg

Stock number: 3775 CNC ROTARY TABLE Manufacturer: KITAGAWA, Type: RS250 RAF02 Machine NO.: A9069, Year of construction: 2000 Specifications: Table size dia 250 mm Table load vertical 250 kg Spindle hole 52 mm Total power Yaskava SGM-08V316S / 0.750 kW Accessories: Tailstock - manual Length: 500 mm, Height: 400 mm, Width: 230 mm, Weight:

weight max.: 2,2 t workpiece diameter: 101 - 1524 mm feed speeds infinitely variable: 0 - 3600 mm/min gear diameter: 254 mm gear width: 76 mm total power requirement: 0,5 kW weight of the machine ca.: 0,245 t dimensions of the machine ca.: 1,02 x 0,82 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5,0 t workpiece diameter: 303 x 2438 mm feed speeds infinitely variable: 0 - 1745 mm/min gear diameter: 305 mm gear width: 100 mm total power requirement: 0,5 kW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 1,5 x 1,05 x 0,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

NC – controlled precision rotary table face grinding machine with vertical grinding spindle and cup grinding wheel - brand new Rotary table diameter 400 mm Largest grindable diameter 400 mm Rotary table speeds 0 to 50 rpm infinitely variable Maximum workpiece weight 75 kg Cup grinding wheel Ø 200 mm x H 80 mm Grinding wheel speed 280 to 2,800 rpm infinitely variable Maximum workpiece height 170 mm Smallest programmable infeed dimension of the grinding wheel 0.001 mm Grinding wheel drive power 3 kW Rotary table drive power 0.5 kW Weight approx. 650 kg

Offer 23093 Specifications: - Load capacity 2000 kg - Face plate diameter 1300 mm - Face plate can be swivelled up to 135 ° via geared motor - Rotary movement electr. infinitely variable - Footswitch for right-hand rotation - left-hand rotation - Welding current transmission 650 A - Drive 400 V - Table height in horizontal position 1360 mm - Space requirement approx. W 1600 x D 2200 x H 1360 mm - Weight approx. 2.0 t

Code: 0168 Brand: STROMAB Model: ST 3000 - CE Standard Rotating pneumatic clamping machine, suitable for planks in general, squared timbers, strips for forming panels, table tops, steps for stairs and coffin - CE Standard Motorized rotation with release pedal and handy control wheel for worktable rotation Working capacity 3000 x 1200 mm Nr. 9 pneumatic front pressers ( 3 each side) Nr. 18 vertical columns with cylinder, diameter 80 mm ( 6 each side) Nr. 3 Working stations Thrust of vertical cylinder 8 bar kg 400 Daily output (8 hours) m2 263 Mechanical safety barriers Overall dimensions : mm 4800 x 2850 x 2300 Weight kg 1100

Offer 23130 Specifications: - Total payload driven + moving unit 60000 kg - Load capacity per container 30000 kg - Workpiece diameter 500 - 4000 mm - Adjustable center distance of the support rollers - Roll diameter 480 mm - Roll width 100 mm - infinitely variable rotation speed - Hand-held remote control for re- and Li. run - Drive 400 V - driven with motorized rail chassis - Space requirements Unit approx. W 4000 x H 1140 x D 1800 mm - Platzb. with running unit approx. W 3500 x H 1100 x D 1400 mm - Weight tr. Unit approx. 4800 kg - Weight with running unit approx. 3500 kg

Table length: 3500 mm Table width: 3500 mm Table load: 80 t X - axis stroke: 3500 mm Portable / Transportable with levelling schoes AWF Fixatoren ROD Heidenhain indexing scale with Dro  Left and Right rotation in 3 indexing feed rates Power 18 kW Quick posititining fixed angle 0-90-180-270 Gr Table Length:  3500mm Table Width:   3500mm Table load:    80000 Rotation B-Axis:360000° Length:        6000mm Width:         3500mm Height:        1400mm Weight:        28000kg

Round Table, Round Dividing Table, Circular Dividing Table WMW Ø 250 mm Table height: 100 mm Slot width: 14 / 24 mm Groove depth: 25 mm Centering hole in table: Ø 20 mm Mounting holes in base plate: Ø 15 x 26 mm ( U-shape ) used, checked! Dimensions: 410 x 370 x 100 mm

Flow rate: 550 ltr./min Head/pressure: 30 m / 3.0 bar RPM: max 400 1/min KW / Voltage: 3,0 / 400 V Suction side / pressure side: DN 100 milk thread / DN 100 milk thread Type: Stationary on galvanized bearing block, pump head in stainless steel, for highly viscous liquids, built in 2017, L 1,180 mm, W 500 mm, H 720 mm Type: Spiral piston pump 07.014 Manuf.: Herold & Co. GmbH Product number: 2023001

DH Robotics RGI-14 Rotary Gripper Gripping force (per jaw): 10~35 N Stroke (both sides): 14 mm Rotation torque: 0.25 N.m Rotation range: Infinite Mechanical specifications Maximum speed of rotation: 1500 deg/s Repeatability of rotation: ± 0.02 deg Backlash of rotation: ± 1 deg Position repeatability (gripping): ± 0.02 mm Opening/closing time: 0.2 s/0.2 s Weight: 1.1kg  Electrical specifications Communication interface: Modbus RTU(RS 485), Digital I/O Nominal voltage: 24 V DC ± 10% Nominal current: 1.1 A Peak current: 2 A Ingress protection rating: IP 20 Recommended operating environment : 0~40°C,