We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,294 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Number of drill units 7 Number of tapping units 4 Number of clamps 8
used
Nestro ATEX - Rotary valve Product Name: Rotary Valve Type: 371004 Manufacturer: Nestro Lufttechnik Serial Number: SA0000427 Year of construction: 2022 Condition: used and refurbished Technical details: - new gear oil - New ATEX rotary sealing lips - new colour scheme - Refurbished housing - V nominal: 45 m³/h - Dimensions (L x W x H): 1,870 x 630 x 360 mm - Inlet and discharge opening (L x W): 1,500 x 300 mm - Transport dimensions (L x W x H): 1,870 x 800 x 510 mm (on pallet) - Weight: 165 kg (185 kg on pallet) Engine data: - Voltage: 230/400 V - Current: 4.25/2.45 A - Frequency: 50 Hz - Power: 1.1 kW - cos φ: 0.79 - Torque: 600 Nm - Speed: 1,412/12 rpm Price: on request (Subject to changes and errors regarding technical data and prices!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of e ...
new
Robust, high-quality rotary device for cylindrical workpieces (boiler roller set), steel rollers coated with polyurethane, infinitely adjustable rotation speed, high frequency protected, right and left run Largest load capacity of the two units together 5,000 kg, workpiece diameter 200 mm to 3,000 mm, drive power 2 x 0.37 kW, drive rollers made of steel of 250 x 80 mm, rotation speed 80 – 1,200 mm/min, maximum temperature load capacity of the rollers up to 110° C, dimensions see figures, weight of the set (driven and non-driven unit together) approx. 230 kg
new
Pneumatic rotary drive, DSO-P 50/ 370-BN-P-H-E, Drumag, new We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece there is still a great discount. If you have a UID number, we will be happy to issue you an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts warehouse of a company and has never been in operation, is completely as good as new and in its original packaging. Radial force 1200 N Axial force 1500 N Max operating pressure 10 bar Functional guarantee! We cannot provide a conventional warranty and warranty for second-hand parts. Since we know that the device works, we give you a functional guarantee when you purchase it. If the device does not work within 6 months of purchase, you can return the goods and w ...
pneumatic rotary drive AMG SAD030 Up to a maximum of 10bar compressed air. At 6 bar 302 Nm. Drive 90° rotating, double-acting. Hpnrf22 Unused from remaining stock complete with 5/2 way solenoid valve from Norgreen 230 V 50/60 Hz, 5 VA, with adjustable throttle for setting time of 1- approx. 25 sec. Limit switch box set up with 2 mechanical switches for ON / CLOSE. See photos. Connection to valve F10, with vk 17 or 22.
used
Memory rotary table, used rotary storage table Manufacturer: RÖSLER Oberflächentechnik GmbH Type: R 1540 ST Table diameter approx. 1500 mm Built: 2003 Total dimensions: approx. 2600 x 2100 x 1000 mm Memory rotary tables are used for storing, buffering, separation and single feeding of rotational symmetrical parts. They are often enrolled in sliding grinding systems. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.
used
Recording VDI 40 for rotary chisel - for longitudinal turning - 8 pieces - for flat turning, piercing - 1 piece
used
Recording VDI30 for drill rod - 4 pieces Recording VDI30 for rotary chisel - for longitudinal turning - 1 piece - for flat turning, piercing - 1 piece
new
Cooling pump for SN 71 C Trens lathe
used
Max. diameter 240 - 2000 Max. plate thickness 10 mm Main motor power 5,5 HP
used
Rotary kiln, gas oven, pyrolysis oven, thermolyse furnace used Manufacture: REIDHAMMER Type: DRA 10/150-G-650; DRA 8/100-G-650 Built in 2015 Temperature max 650° C Natural gas Furnace chamber approx. 8 x 2 x 2.2 m Filling volume 1.77; 0.63 m3 Dimensions total approx.: 17 x 2 x 3 m
new
Manufacturer Düchting Type centrifugal pump LHK 125x5 Unused / Refurbished Flow rate 180 m3/h Head 150m Step number 5 Weight approx. 550kg Special price
used
SOLLANT SLT 15 rotary screw compressor built in China in 2021 is a versatile device designed to deliver the highest quality compressed air. The compressor’s special modular design features a small number of parts and connectors, ensuring efficient and uninterrupted operation even during the most demanding industrial applications. The SOLLANT SLT 15 rotary screw compressor also features an integrated SOLLANT LGA-2.6 refrigeration dryer, which continuously removes moisture and water vapour from the compressed air, minimising the risk of corrosion. All key operating parameters are continuously monitored by a MAM-880 controller with electronic display and sensors. The total weight of the machine is 550 kg. Technical specifications of the SOLLANT SLT 15 compressor - power: 15 kW - maximum operating pressure: 1 MPa (10 bar) - capacity: 2.1 m3/min - drive type: direct drive - refri ...
used
Storage number: 3590 CONTAINER ROTARY DEVICE Manufacturer: HENDRIKS, Type: 100 T Machines NR.: 06, Built: 2009 specifications: Size workpiece weight 100000 Kg Diameter 4800 mm Rolls slide. 700 mm Rolls width 480 mm Stepless rotations m/min Engine power 2 x 0.75 kw Drive rollers 1 pc Running rollers 1 pc Length: 3900mm (3700), Height: 1200 mm, Width: 1300 mm (900), Weight: 5000 kg
used
In line panel rotator Max. panel sizes: 5200 x 1350 mm Max. panel thickness: 60 mm Working height: ca. 900 mm 6 cycles/min
used
Gravity rotary filler with height adjustable bell. With 32 filling nozzles Max. speed: 5.000 bottles/h
used
Rotary filtre,stainless steel,Fratelli Gianazza type 15020,5,6 m²
used
Rotary labeller, one head and hot glue application by NORDSON PRO BLUE4 melter/injector Last application. Labeling of 1 lt PET bottles. Dimensions Ø85mm x h300mm It has a format for 500ml bottles
used
Rotating grater stainless steel,Ø 120 x L 180 mm,2,2 kW variable speed.
used
rotary table diameter: 1000 mm grinding height: 500 mm grinding head - power requirement: 15/5,5 kW total power requirement: 30 kW weight of the machine ca.: 18 t dimensions of the machine ca.: m S I E L E M A N N (Germany) Hydraulic Rotary Table Internal and Face Grinding Machine with two grinding heads and with horizontal workpiece clamping Model RFsB 100 Year 1969 / fully reconditioned by the manufacturer in 1990 _______________________________________________________ Max workpiece Ø 1,000 mm Max. height of workpiece, approx. 400 mm Mounting height under grinding spindles approx. 500 mm Grindable Bore Ø, approx. 50 – 900 mm Max. Workpiece weight approx.. 900 kg Distance between Table bore and column 1.150 mm Table Ø / Face plate Ø, approx. ...
used
workpiece diameter: 600 mm workpiece weight: 400 kg workpiece height: 300 mm total power requirement: 35 kW weight of the machine ca.: 4500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
The machine is in good technical condition. Working spindle diameter: 80mm Table dimensions: 900x1120mm By prior arrangement, the possibility of a tour in progress.
used
table length: 590 mm table width: 590 mm table load: 200 Kg table turning speeds: 0,23 - 2,3 U/min table height: 650 mm total power requirement: 0,55 kW weight of the machine ca.: 600 Kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
in good technical condition. Working spindle diameter: 100m Clamping surface of the table: 1000x1120 A tour is possible by prior arrangement.
used
Type: SR 1600/10000 Location: Czech Republic tour possible good condition
used
Machine in good technical condition, possibility of testing after agreement. Control system FAGOR year of manufacture 1997 Accessories: rotating knife head + additional dovetails behind the knife head for additional equipment (another knife holder or Morse taper drill equipment).
new
table diameter: 960 mm table load: 3,5 t swivelling range: 0 - 110° deg. table rotating: 360° deg. table turning speeds: 0,1 - 0,9 U/min height adjustment: 1070 - 1800 mm table drive: 1,5 kW hydraulic motor: 1,5 kW total power requirement: kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,35 x 1,35 x 1,80 m Hydraulic Welding Positioner - Adjustable rotating speed - Remote controller with 5 meter cable length - Digital speed indicator on the controller panel for monitoring rotation - Mechanical angle indicator (for tilting) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
The machine is in good technical condition. Machine parameters: Table size 4800mm x 1050mm. Travel axes X/Y/Z 4000mm, 990mm, 1300mm Engine power 22/26KW. By prior arrangement, the possibility of a tour in progress.
used
table diameter: mm stations: 10 axis stroke (X,Y,Z): 250 / 400 / 400 mm control: Siemens 840D total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Rotary cycle machining center for machining serial parts. 10 stations 31 NC axes Control: Siemens 840D Maximum productivity through parallel work processes on up to 9 stations Loading and unloading can be automated in parallel to the main time Travels X / Y / Z: 250/400 / 400mm 10 planet carriers rotatable 360 ° for clamping devices, incl. Media feed-through for hydraulics and pneumatics 5 stations equipped with 6-fold revolver make Sauter Machine hours as of December 20, 2020 Operating hours 15,024 h Production hours 8,115 h Manufacturing costs: € 1,200,000 The application on customer workpieces can be offered. The data for this ad was created with ModulMWS - the software solution of Log ...
used
The machine is in good technical condition. Separating force: 220 kN Travel X: 2500 mm Travel Y: 1250 mm Control system BOSCH Rotary head In operation: 36200 h Accessories: 2 tool cartridges USB interface Weight: 11050 kg Upon prior agreement, the possibility of inspection while in operation.
used
table diameter: 800 mm table load: 0,6 t table height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Circular Indexing Table dia 800 mm, motorized rotating, swivable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
The machine is in good technical condition. Max. grinding diameter: 605 mm Max. workpiece diameter: 630 mm Spike distance: 5000 mm Maximum workpiece weight: 3000 kg Machine weight: 18000 kg By prior arrangement, the possibility of a tour in progress.
used
The machine is in good technical condition. Table size 1500x3000mm + accessories for rotary burning of tubes. Source Alpha In -Pegasus 2 burners / small+large By prior arrangement, the possibility of a tour in progress.
used
table diameter: 500 mm table load: x t table height: x mm spindle diameter: 0 mm x-travel: 500 mm y-travel: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
table length: 1000 mm table width: 1000 mm table load: 1,5 t flange diameter: 700 mm turning speed: max. 0,04 U/min weight of the machine ca.: 1,2 t dimensions of machine L x W x H: 1,60 x 2,0 x 1,50 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
table diameter: 450 mm table load: waagerecht 300 Kg table load: senkrecht 150 Kg table turning speeds: 0,2- 2 U/min voltage: 230 V / 50 Hz total power requirement: 0,55 kW weight of the machine ca.: 80 KG dimensions of the machine ca.: 0,65 x 0,5 x 1,0 m • unused stock machine • manual tilt adjustment • Start-Stop by foot switch • with CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table diameter: 1525 mm table load: 5,0 t swivelling range: 135° deg. table rotating: 360° deg. table turning speeds: 0,05 - 1 U/min height adjustment: mm table drive: 1,5 kW total power requirement: kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: 1,80 x 1,54 x 1,20 m Adjustable rotating speed Remote controller with 5 meter cable length Digital speed indicator on the controller panel for monitoring rotation Welding – chassis mechanism Mechanical angle indicator (for tilting movement) Motors with brake & forced fan cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table diameter: 1500 mm table load: 5 t swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min : 10000 Nm 0: 1,5 / 1,5 kW welding current: 700 Ampere • Self-locking gear, therefore no forward and backward at eccentric load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table diameter: 780 mm table load: 1,0 t swivelling range: 0 - 135 Grad turning speeds: 0,15 - 1,5 U/min table height adjustment: von 780 bis 1560 mm max. torque on the faceplate: 1000 Nm welding current: 500 Ampere including remote control and welding current transmission. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table diameter: 900 mm table load: 1,0 t swivelling range: 135 Grad turning speeds: 0,12 - 1,2 U/min : 820 mm welding current: 500 Ampere total power requirement: 0,75 + 0,55 kW weight of the machine ca.: 1,1 t dimensions of the machine ca.: 1,5 x 1,0 x 0,9 m • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table diameter: 1200 mm table load: 1,2 t swivelling range: 0 - 120 Grad turning speeds: 0,06-0,6 U/min max. torque on the faceplate: 2400 Nm table pass: 200 mm welding current: 500 Ampere total power requirement: 0,75 + 1,1 kW weight of the machine ca.: 1,0 t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table diameter: 1000 mm table load: 0,6 t swivelling range: 0 - 90 Grad turning speeds: 0,1 - 1,25 U/min max. torque on the faceplate: 900 Nm table pass: 200 mm welding current: 500 Ampere total power requirement: 0,37 + 0,75 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table diameter: 1000 mm table load: 1200 Kg swivelling range: 0 - 135 Grad turning speeds: 0,1 - 1,0 U/min height adjustment: 1000 - 1450 mm max. torque on the faceplate: 2000 Nm engine output: 0,75 / 0,55 kW welding current: 500 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table diameter: 1400 mm table load: 5 t swivelling range: 0 - 135 Grad turning speeds: 0,05- 0,5 U/min table height adjustment: von 1100 bis 1950 mm max. torque on the faceplate: 7000 Nm welding current: 700 Ampere including remote control and welding current transmission. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table diameter: 560 mm table load: 0,3 t swivelling range: 0 - 90 Grad turning speeds: 0,25 - 4,0 U/min : 360 Nm welding current: 500 Ampere total power requirement: 0,4 / Hand kW • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table diameter: 1500 mm table load: 5000 Kg swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min height adjustment: 1300 - 2050 mm max. torque on the faceplate: 10000 Nm engine output: 1,5 / 1,5 kW welding current: 1000 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table diameter: 1400 mm table load: 2,0 t swivelling range: 0 - 135 Grad turning speeds: 0,05 - 0,5 U/min max. torque on the faceplate: 6000 Nm table pass: 200 mm welding current: 700 Ampere total power requirement: 1,1 + 2,2 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table diameter: 1600 mm table load: 6 t swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min : 12000 Nm 0: 1,5 / 2,2 kW welding current: 700 Ampere • Self-locking gear, therefore no forward and backward at eccentric load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Table dimensions: 800 x 800 mm table load: 1500 Kg swivelling range: 0 - 105 Grad turning speeds: 0,15 - 1 U/min height adjustment: 672 - 1180 mm hollow spindle diameter: mm welding current: 500 Ampere max. torque on the faceplate: 3000 Nm total power requirement: 0,75 kW dimensions of the machine ca.: 1560x1120x750 m Characteristics: • Made in EU • Self-locking gear, therefore no leading and trailing at eccentric load • Hydraulic height adjustment allows almost limitless positioning • Electronic quality components from Schneider / Siemens / Delta • Frequency-controlled stepless speed of the turntable • High stability through a heavy and compact design • CE certificate • Very good value for money • Standard version comes with remote control and dual foot pedal • 3 years warranty (see warranty conditions) • Hydraulically height adjustable with locking system (for fal ...
new
table diameter: 700 mm table load: 0,6 t swivelling range: 0 - 90 Grad turning speeds: 0,2 - 2,0 U/min : 900 Nm total power requirement: 0,37 / 0,37 kW • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.