ross used for sale

Built: 2003 Condition: new Transmission ratio: 26.3 Input speed (n1): 2000 rpm Output speed: 76.2 rpm Efficiency: 0.94 Dimensions: Length 790 mm (without shaft), 966 mm with shaft Width: 450 mm Height: 300 mm Shaft diameter: 155 mm Weight: 352 kg For further technical information, please refer to the uploaded data sheet.

Transmission Manufacturer: Rossi Model: R2E 355 FC2S The gearbox is NEW and fully functional. see pictures for more details.

Gear motor, electric motor, electric gear motor -Engine manufacturer: ASEA type MBT132S -Gearbox manufacturer: Rossi, type RV125U02B -Speed: 99 rpm -Power: 5.5 kW -Construction: B3 -Hollow shaft: Ø 60 x 210 mm -Protection class: IP54 -Dimensions: 470/320/H775 mm -Weight: 149 kg

Gearbox, Spur Gear, Angle Gear, Worm Gear, Movegear, Flat Gear, Flat Gear -Manufacturer: Rossi, spur gear from gear motor type MR 3I 50PC1A -Translation: i= 34.7 -Shaft: Ø 24 x 50 mm -Dimensions: 205/175/H190 mm -Weight: 9.7 kg

CNC centerless grinding machine Monzesi mod Monza 510 CNC 6 axes complete with piece loading and unloading system CNC Fanuc 160i-T Under power in our warehouse in Gussago BS. Mimu machine tools Italy

power capacity: 12 Nm volt: 210 V ampere: 21,5 A total power requirement: kW weight of the machine ca.: 13 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ross Industries A10 Tray sealer Serial: 406 2011, stainless tray sealer, modified atmosphere or seal only, up to 10 trays per min, seals two tray at a time, tray dims 200mm x 160mm, adjustable temp and timer controls, 3Ph

Monzesi Rossi Monza 500 centerless grinding Grinding wheel 250 500, Recent Electric retrofit The machine is in our warehouse in Gussago BS, under power M i m u machine tools, Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterruptedly with axial feed through the rectification gap.ith axial advancement through the grinding gap.

Centerless grinding machine, ROSSI MONZA 400 Grinding wheel width 200mm Grinding wheel diameter 400 pneumatic compensation under power in our warehouse in Gussago BS (Italy) Centerless grinding is a procedure for grinding cylindrical bodies and is used for the mass production of rollers cylinders, tapered rollers, jet needles, pump pistons, hydraulic sliders, crosses, tips, etc. During centerless plunge grinding (plunge grinding), the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, grinding wheels and setting discs have a negative workpiece profile to work which is given to them with the aid of a tool. Centerless through-feed grinding or through-feed grinding and longitudinal grinding: workpieces to be machined proceed continuously with axial feed through the grinding gap., Grinding wheel width: 200, Grinding wheel diameter: 400

CN Centerless grinding machine, ROSSI MONZA 1500 CN, currently being overhauled and fully electrically/electronically retrofitted, Siemens electronics with touchscreen, brushless motor on Z (workpiece diameter) and regulating wheel (adjustable RPM), step motor on grinding wheel dressing increment, auto size compensation after grinding wheel dressing, Grinding wheel 350 mm 610 mm dia, This machine can be inspected in our warehouse in Gussago BS Italy Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc. During centerless plunge grinding, the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece to work which is g ...

Centerless grinding machine, ROSSI MONZA 410 Monzesi, Grinding wheel width 200mm Grinding wheel diameter 400 pneumatic compensation, auto plunge, overhaul - retrofit - PLC under power in our warehouse in Gussago BS (Italy) Centerless grinding is a procedure for grinding cylindrical bodies and is used for the mass production of rollers cylinders, tapered rollers, jet needles, pump pistons, hydraulic sliders, crosses, tips, etc. During centerless plunge grinding (plunge grinding), the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, grinding wheels and setting discs have a negative workpiece profile to work which is given to them with the aid of a tool. Centerless through-feed grinding or through-feed grinding and longitudinal grinding: workpieces to be machined proceed continuously with axial feed through the grinding gap., Grinding wheel  ...

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 80 to PRESS TABLE   table surface (left-right): 860 mm   table surface (front-back): 620 mm   thickness of bolster plate: 70 mm   opening in bed (diameter): 165 mm SLIDE   table surface (left-right): 570 mm   table surface (front-back): 390 mm   spigot hole diameter: 50 mm   stroke: 120 mm SLIDE (MECHAN. PRESS)   slide adjustment: 90 mm   stroke min.: 9 mm   stroke max.: 120 mm   main drive power: 5.5 kW TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 360 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 1420 mm   space requirements -front/back-: 1700 mm   total height: 2990 mm   to ...

Key data: 200 t, 80 mm

Inv. Num. : 9036 Type: 200 T Producer: ROSS Created: 2003 Parameters: Control system: DIMECO MCU 24 Compressive force: 200 t Table length: 2100 mm Table width: 1000 mm Stroke: 80 mm Adjusting the ram: 150 mm Machine weight: 36700 kg

1,5 litre, Stock number: R1196, Double plantary mixer, stainless steel/coated,, Ross type DPM-1P., 0,37 kW motor with variable speed,, 380 V., Work capacity 0,25-0,5 litres,, pneumatic height adjustable function., Prepared for vacuum., Litre: 1,5, Material: Stainless steel AISI 304/coated

5,7 litre, Stock number: R1183, Double planetary mixer, stainless steel,, Ross type LDM-2., Double jacket., Variable speed 20-100 rpm., Removable pot., Litre: 5,7, Material: Stainless steel AISI 304

Equipped with MantaMesh shelves in 750/1000/1250 kg UDL this may vary per section, Beam type A1240 2225mm (228cm total) Each section consisting of 3 levels (6 beams + fall-through protection) Auction-ID: A1-41991-33

Equipped with MantaMesh shelves in 750/1000/1250 kg UDL this may vary per section, Beam type A1240 2225mm (228cm total) Each section consisting of 3 levels (6 beams + fall-through protection) Auction-ID: A1-41991-32

Equipped with MantaMesh shelves in 750/1000/1250 kg UDL this may vary per section, Beam type A1240 2225mm (228cm total) Each section consisting of 3 levels (6 beams + fall-through protection) Auction-ID: A1-41991-30

Equipped with MantaMesh shelves in 750/1000/1250 kg UDL this may vary per section, Beam type A1240 2225mm (228cm total) Each section consisting of 3 levels (6 beams + fall-through protection) Auction-ID: A1-41991-34

Equipped with MantaMesh shelves in 750/1000/1250 kg UDL this may vary per section, Beam type A1240 2225mm (228cm total) Each section consisting of 3 levels (6 beams + fall-through protection) Auction-ID: A1-41991-31