roma used for sale

Volume: 220 ltr. Material: Stainless steel Heater jacket: 6 bar Operating temperature: 140 ° C Length x width x height (mm): 2300 x 1000 x 2000 Pharmamaschine, suitable for high vacuum.

Automatic capsule filler Romaco Macofar model MT80 for a produccion up to 80.000 capsule per hour . The machine include format n°2 for pellets

ROMACO KILIAN TABLET PRESS, MODEL S370 PRIME Medium-sized single-layer rotary tablet press. Modular and compact, for flexible tablet production. Made in Germany. Built in 2022. CHARACTERISTICS - Interchangeable die table - Tablet chute on one side - Simple and intuitive HMI control system - Connectable tablet control unit for automatic in-process control - Weight: 1.925 kg PRODUCTION - Output: 156,000 to 330,000 (depending on tablet size and pressing material) - Printing stations: 26 to 44 - Number of dies: 44; 40; 32; 26 - Tool type (EU and TSM): B; D - Die type: BBS; BB; B; D - Max. pre-compression force: 40 kN - Max. main compression force: 80; 100 kN - Max. tablet diameter: 11; 13; 16; 25 mm - Max. die fill: 16; 20 mm ENERGY CONSUMPTION - Drive power: 5.5 kW - Standard voltage, frequency: 400 V, 50/60 Hz - Compressed air: 6 bar

Article number: KB-1000 Brand: URB Model: NU2308E Year of constr.: Unused Stucco number in stock: approximately 4250 (2125 package x 2 pcs) Weight (kg) ca: 4080 NET / 4235 large Manufactured in: Romania Ã? diameter (mm): 40mm inside / 90mm outside Comments: Unused original packed bearings Price per kg (ex VAT): € 2.50

throat: - mm tool adaptor: - power requirement: - kW : 23 mm spindle distance: max. 400 mm : 1200 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electric motor, three-phase motor -Manufacturer: EP Romania, electric motor type MA24F165S-2 -Power: 1.5 kW -Speed: 2855 rpm -Shaft: Ø 24 x 50 mm -Design: B5 -Protection rating: IP44 -Dimensions: 295/200/H220 mm -Weight: 18 kg

Specific Details Industry:pharmaceutical, cosmetics, nutraceutical, food, others Number of cartons:70 /min Length of carton (min):60 mm Length of carton (max):210 mm Width of the carton (min):20 mm Width of the carton (max):125 mm Height of the carton (min):15 mm Height of the carton (max):80 mm Motion:intermittent Leaflet device:Yes

Manufacturer: Roma Rolltor Kunststofflammele, Year: ca2000, FREETEXT1: mit Antrieb , FREETEXT2: Kunststoflamelle, FREETEXT3: 2 Führungschienen<CRLF>3380 mm, FREETEXT4: Rolltorhöhe 3380 mm, FREETEXT5: Rolltorbreite 3340 mm, Year :ca2000

Multi-spindle head, multi-spindle drilling head, drilling gear -Manufacturer: Romai, multi-spindle head 2 spindles -Type SMSK 2/23 -Drilling tool holder: MK3 -min. distance drill bit: mm -Dimensions: Ø 220 x 455 mm -Weight: 27 kg

Romaco-Siebler HM1/160 vertical strip packing machine for tablets, 3 lanes, maximum foil width 170 mm, includes format parts for tablets with dimensions of 7.2 x 5.6 x 17.5 mm and 11.4 x 6.31/WR8.5, foil reel core diameter 76 mm, maximum foil reel diameter 450 mm, Siemens SIMATIC S7-300, excellent working condition with only approx. 1600 running hours

ROMACO NOACK BLISTER PACKING LINE --- 1) BLISTER PACKING MACHINE ROMACO NOACK, MODEL N921 Year of construction: 2010 Rotary sealing machine. With the latest servo technology, and the best tool-free changeover times in the industry. CHARACTERISTICS • Carton output: 400/min. (max) • Forming cycles: 100/min. (max) • Blister output: 500/min. (max) Compatible products: Tablets, capsules, soft gels, caplets, child-resistant/senior-friendly packs, coldform aluminum, multi-layer lidding materials • Foil width: 210 mm (max) • Forming depth: 12 mm (max) Reel diameter forming foil: 700 mm (max) • Reel diameter lidding foil: 280 mm (max) • Carton size (A/B/C): 120/95/210 mm (max) ---- 2) UHLMANN CARTONER, MODEL C150 Year of construction: 2010 Cartoner for big industrial production as well as in smaller, less equipped factories. with GMP-compatible pharm ...

Romaco-Siebler CV 1/060 vertical cartoner, intermittent motion with Merz infeed/counter (5 lanes) for the packing of sticks, tuck and glue closure of the bottom and top flaps, carton size range: min. 20 x 15 x 60 mm (AxBxC), max. 170 x 140 x 200 mm (AxBxC), Laetus Argus bar code reader for carton capacity up to 60 cartons per minute, floor space cartoner approx. 6100 x 1600 mm (LxW), floor space cartoner including Merz conveyor/counter approx. 7400 x 3400 mm (LxW)

Key data: 4 , 14 mm

Multiple drill head from Romai, Sigloch & Schrieder up to diameter 14 mm in steel 4 stations, automatic and manual switching 2 speed ratios choiceable (direct and reduced) incl. adapter MK 4 and flange

ROMACO NOACK BLISTER PACKAGING LINE, UNITY 300 Year of construction: 2022 Packaging line composed of a single-track blister machine with rotary sealing and a continuous motion cartoner. Modular line ready to be connected to different track & trace systems and end of line packaging solutions. PRODUCTION - Output blisters/minute: 300 max. - Output cartons/minute: 10 – 300 (min-max) - Forming cycles/minute: 100 max. - Die-cutting cycles/minute: 300 max. - Foil width max: 165 mm - Forming area max: 190 × 150 mm - Die-cutting area max: 100 × 150 mm - Forming depth max: 12 mm - Forming material reel diameter max: 700 mm - Lidding foil reel diameter max: 300 mm - Carton dimensions (A × B × C): 35 × 15 × 65 to 105 × 100 × 160 mm (min-max) DIMENSIONS - Machine dimensions (L × W × H): 8,270 × 1,890 × 2,230 mm - Weight (approx): 5,300 kg  ...

• Vertical cartoner, semi-automatic • 2 operating modes: intermittent, continuous • Intermittent output max. 50 packs/min • Continuous output max. 110 packs/min • Format range folding carton d 18-80, w 20 - 120, h 50 - 250 mm • Folding carton removal with suction cups • Blind embossing for lower tuck-in flap (without embossing roller) • Leaflet inserter for pre-folded leaflets • Bad ejection • Outfeed conveyor • Vacuum pump • Partial enclosure with segment doors • PLC Siemens S7-300 • HMI Promatic UniOP • Drive 400V/50Hz

Inv. Num. : 8642 Type: ROMAT 350 ROTOL Producer: CLOOS Created: 2007 Parameters: CLOOS Welding Robot Workstation allows welding in the MIG/MAG process alternately at three workstations. Currently, only two are used: One is equipped with a two-axis positioner for fixing the welded part with the possibility of a horizontal axis of rotation with support the second is equipped with the same positioner without support the third workstation is not equipped with a positioner. For an optimal work process, 11 programming axes are available.

A fully overhauled automatic welding station Cloos from the year 2025 is available. Robot type: Romat 320, welding power source: GLC 353 MC3 R, control system: Rotrol II fibre optic, welding process: MIG. Load capacity: 15kg, robot axes: 6, reach: 3200mm, repeatability: +/-0.1mm, power: 25kVA, total weight: approx. 600kg. Documentation available. An on-site inspection is possible.

General SKU268K299 MakeRomaco AG Fryma Koruma Rheinfelden TypeCoBall mill MS-50 No.75439/00 Year of construction2000 LocationBarneveld Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialStainless steel Volume9.8 Ltr. Motor55 KW Specified Features - Sand mill Vertical sandmillAnnular gap bead mill (1x) Capacity9,8 Ltr Housing dimensions dia. 520x300mm With mechanical sealcheck With jacketcheck Rotor jacketedcheck Max. temperature80 Degr. C. Motor55,0 KW, 400/690 Volt (Ex) Capacity150-1000 Ltr/Hr MaterialStainless steel Information With switchcheck Floorspace2,1x1,0 M Total height2,3 M ATEX compatiblecheckSand millsRomacoMills > Sand millsBrand > Romaco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ...

A completely overhauled automatic welding station Cloos from the year 2025 including two rotary tables is available. Robot type: Romat 350, welding source: GL 300 IHPR, control system: Rotrol II, welding process: TIG. Rotary table load capacity: 2x250kg, rotary table type: WPEK-DP-KP-2.5kN, axes: 6+2+2. Documentation vorhanden. An on-site inspection is possible.

Key data: 105 mm, 2500 mm, 1850 mm

CNC Heidenhein TNC 124 table 1750 mm x 2000 mm spindle dia. 105 mm x - 2500 mm, y - 1850 mm, z- 1400 mm, w - 700 mm

General SKU252W328 MakeFryma Koruma LocationBarneveld CEcheck TypeVME-120/C Pressure Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume120 Ltr. Motor15 KW Specified Features - Processing vessel MaterialStainless steel 1.4435 (316L) Closed stirring vesselcheck Capacity226 Ltr. (netto 120 Ltr.) Vessel sizesDia. 900x650 mm Dished bottomcheck Hollow bottomcheck Flat top sidecheck With covercheck Top connectionscheck Outlet2x 40 mm, 1x 80 mm With jacketcheck Volume 28 ltr. Max. temperature140°C With anchor stirrercheck Motor3,0 kW, 400 volt, 1410 rpm Speed mixing shaft27 rpm With homogenisercheck Motor15 kW, 1460 rpm Information No.100497 Year of construction2002 Mounted on legscheck With switchgearcheck (as is) Floorspace3,45x1,50 m Total height2,10 m Weight2000 kg Extra Specifications- With hydraulic unit.  ...

General SKU408S978 MakeKoruma Maschinenbau GmbH (D) LocationBarneveld TypeDisho In-Line 0/100 Main Features MaterialStainless steel Motor5.5 KW Inlet diameter32 mm Rotor100 mm Specified Features - Inline mixer Continuous reactorIn Line Dispersing and Homogenising Rotor sizesdia. 100 InletDN32 OutletDN32 With mechanical sealcheck Motor5,5 kW 400 Volt Rotor speed2885 rpm With vesselcheck Capacity40 ltr. Vessel sizesdia. 390x400mm with stirrer 0,55 kW 230/400 Volt 309-1539 rpm MaterialStainless steel 1.4571 (316Ti) Inline high shear mixers InletDN32 OutletDN32 With mechanical sealcheck Motor5,5 kW 400 Volt Speed2885 rpm With propellor stirrercheck Motor0,55 kW 230/400 Volt With variable speed drivecheck Speed309-1539 rpm Information No.5389 Year of construction1995 Mounted on framecheck With switchcheck Floorspace1,2x0,6 M Total height1,7 M Weight200  ...

A robot-assisted welding system from Cloos with a Kuka robot is available. Robot weight: 1155kg, control system: Qirox C Romat 520, control weight: 300kg, robot axes: 6. Documentation available. An on-site inspection is possible.

Manufacturer: Cloos Model: Romat 350 Year of Manufacture: 2007 Type of Machine : Robotic Welding System Operating Hours: approx. 90,000 h Type: Robotic Welding System Included: GLC 353 MC3/R Welding Power Source Included: MRW 380-31 Welding Torch 35 degrees Find more here - / Contact us at -

Used automatic line from Romaco for packaging products in PE or AL tubes. The line includes: 1. Automatic tube machine for PE or AL tubes from Romaco type U 20100. For the machine there are tooling for tubes with diameters : for plastic tubes: 16,19 shallow,19 deep, 25,30,35,50,50 shallow,50 deep for metal tubes: 13.5, 19 shallow, 19 deep, 25,30,35 2, Automatic cartoning machine from Romaco type Promatic P91 with a capacity of 90 pcs/min. The cardboard machine has a GUK leaflet folder type FA 21/4 and a date stamp for cartons. The weight of the cartoner is 2100 kg. Year of manufacture 2008. CE. Manufacturer's documentation.

Multi-spindle head, multi-spindle drilling head, drilling gearbox -Multi-spindle drill head with: drive -Drive geared motor SEW Eurodrive type: RF40DT80K4B -Power: 0.55 kW -Speed: 165 rpm -max. x: drill bit -4x built-in drill bits Collet: mm -Drilling pattern can be adjusted -Dimensions: 1115/150/H300 mm -Weight: 55 kg

Multi-spindle head, multi-spindle drilling head, drilling gearbox -Multi-spindle drill head with: drive -Drive geared motor SEW Eurodrive type: RF40DT80K4B -Power: 0.55 kW -Speed: 165 rpm -max. x: drill bit -4x built-in drill bits Collet: mm -Drilling pattern can be adjusted -Dimensions: 1115/150/H300 mm -Weight: 55 kg

Multi-spindle head, multi-spindle drill head, drilling gear - Joint multi-spindle head -max.: x drill -3x built-in drill collet: mm -min. Distance drill: mm -Weight: 11.3 kg -Articulated multi-spindle heads are variable tools: for various machining operations such as drilling, thread cutting, ountersinking, reaming, milling, turning, with which several holes can be machined at once.

Multi-spindle head, multi-spindle drill head, drilling gear -Joint multi-spindle head -Max. x drill -7x drill built-in collet: mm -min. Distance drill: mm -Weight: 11.3 kg Articulated multi-spindle heads are: variable tools for various machining operations such as drilling, thread cutting, countersinking, reaming, milling, turning, with which several holes can be machined at once.

With RO BC 14/36 EU charging station and 2x 18V Li-ion batteries.