rolling mill used for sale

x-travel: 3000 mm y-travel: 1600 mm z-travel: 1500 mm Control: Heidenhain i TNC 530 main spindle:: turning speed range - main spindle: 5000 min/-1 Drive power - main spindle: 35 kW Automatic swivel head: Kosmo 3 Indexing B axis: 0,02 ° Indexing A axis: 0,02 ° rotary table:: table surface area: 1600 x 1200 mm max. table load: 8 t tool changer:: tool taper: SK 50 number of tool places: 120 Pos. total power requirement: 48 kVA weight of the machine ca.: - t - CNC Control Heidenhain iTNC 530 - Probe M+H, radio transmission - Pallet Cnager 3-fold 1600 x 1200mm - Milling Head KOSMO 3 -- 0,02 x 0,02° - ATC 120-fold - 2x belt chip conveyor - electronic handwheel - NC rotary table - IKZ 40 bar with paper band filter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC - Universal milling machine HERMLE UWF 902-S -Heidenhain 426 -Built in 1997 -Travel X/Y/Z 600-450-500mm -Speed range 20-6300 rpm -Tool holder SK40 -Vertical - Horizontal milling device -Drill quill -Coolant device -Angle table -Machine enclosure -Documentation Dimensions: LxWxH 3,9x2x2Meter / Weight 4000Kg Hobkn Au Sjv Iklus Tol

Tool milling machine DECKEL FP 2 LB 3 axis digital display maintained original condition - 3-axis digital display (ACU-RITE) - Travel X/Y/Z: 795 × 300 × 400 mm - Automatic feeds and rapid traverses in all 3 axes (18 stages) - Spindle speeds: 40–2000 rpm (18 steps) - Horizontal and vertical milling equipment - ISO 40 tool holders - Table clamping surface: 1000 × 440 mm - Swivelling vertical head with drilling quill - Coolant device - Various tool holders - Documentation available L×W×H 2.5×2.4×1.8 meters / Weight 2200Kg

Tool milling machine Deckel FP 2 / 3-axis digital display"NEW"/ORIGINAL CONDITION -Travel X/Y/Z 400x200x400mm -Table clamping surface 700x350mm -Speed range 40-2000 rpm -Feeds & rapid traverses in all three axes -Tool holder ISO 40 -Vertical / horizontal milling device -Coolant device -3-axis digital display "NEW" -Spindle nut X-axis "NEW" -Machine feet -Documentation Dimensions: LxWxH 1.5x1.7x1.8 meters / Weight 1600Kg

Tool milling machine Deckel FP 2 / 3-axis digital display Heidenhain ND 780 -Travel paths X/Y/Z: 450 x 200 x 400 mm -Table clamping surface 700 x 350/tilt-swivel rotary table -Speed range: 40–2000 rpm -Feeds & rapid traverses in all three axes -Tool holder: ISO 40 -Vertical/horizontal milling device with vertical sliding head -Coolant device -3-axis digital display: Heidenhain ND 780 -Documentation -Chip tray -Various tool holders -Collets Dimensions: LxW xH 1.5x1.7x1.8 meters / Weight 1600Kg

Tool Milling Machine Deckel FP2E -Extremely smooth running + fully functional -Automatic feeds + rapid traverse in X + Z axis -Machine with sliding head means larger Y-travel -Travel X/Y/Z 400x200x400mm -Speed range 40-2000 rpm -Tool holder ISO 40 -Vertical horizontal milling device -Vertical head swivel with drilling quill -Angle table -Various tool holders -Documentation Dimensions: LxWxH 1.5x1.7x1.8 meters / Weight 1500Kg

Tool milling machine DECKEL FP 2 LB from university in well-maintained original condition -3 - Axis digital display "ACURITE" -Travel X/Y/Z 795x300x400mm -Automatic feeds / rapid traverses in all 3 axes (18 pieces) -Spindle speeds 40-2000 rpm (18 pieces) -Horizontal + vertical milling device - ISO 40 - Tool holders -Table clamping surface 1000x440mm -Table clamping surface with additional table 1000x700mm -Vertical head swivel with drilling quill -Coolant device -Various tool holders -Machine light -Documentation Dimensions: LxWxH 2.5x2.4x1.8 meters / Weight 2200Kg

Universal / Tool Milling Machine DECKEL FP 1 & 3-Axis Heidenhain Digital Display -Very neat original condition -Travel X/Y/Z 300x150x340mm -Speed range 40-2000 rpm - Automatic / feeds / inputs in two axes -Vertical / horizontal milling device -Tool holder ISO 40 -Rigid angle table -3 - Axle digital display Heidenhain -Coolant device -Chip tray -Documentation Dimensions: LxWxH 1.1x0.8x1.7 meters / Weight 700Kg

ARBOGA UM 3508 Drilling-Milling Machine -Operating voltage: 380 - 415 V -Connection: 1.5 kW -Speed: up to 1400 rpm -Rated current: 5.7 A -Speed: from 70 to 2590 rpm -Drilling depth: up to 170 mm -Table dimensions: 650 x 270 mm -with three grooves -Incl. three-axis digital display from the manufacturer HEIDENHAIN also an attached vice, jaw width: 85 mm and a matching dividing head Dimensions: LxWxH 1.2x1.1x1.9 meters / Weight 700Kg

Universal tool milling machine WAGNER FCA 400 -Year of construction 2008 -CE marking -3-axis digital display -Travel X/Y/Z 450x400x400mm -Rigid angle table 740x320mm -Automatic feeds in all three axes -Rapid traverses -Speed range 40-2000 rpm -Tool holder ISO 40 -Vertical / horizontal milling device -Vertical head with drilling quill -Safety handwheels -Coolant device -Horizontal - Counter bearings -Work light -Machine feet Dimensions LxWxH 1.4x1.2x1.9 meters / Weight 1800Kg

Tool Milling Machine DECKEL FP 3 Heidenhain Digital Display -Well-maintained original condition -Travel X/Y/Z 500x300x400mm -Feeds / rapid traverses in all 3 - axes -Tool holder ISO 40 -Speed range 40 - 2000 rpm -Vertical / horizontal milling device -Angle table -Coolant device -Central lubrication -Chip tray -Documentation Dimensions: LxWxH 1.7x1.2x1.8 meters / Weight 1350 kg

A conventional universal milling machine Malick & Walkows is available. Table dimensions X/Y: 1000mm/300mm, speed: 1120rpm, travel X/Y/Z: 900mm/300mm/500mm, quill stroke: 80mm, feed rate: 250mm/min, machine dimensions X/Y/Z: approx. 1700mm/1900mm/1700mm, weight: approx. 1750kg. Including machine vise and accessories. An on-site inspection is possible.

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Working area 1Longitudinal560 mmCross600 mmVertical600 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minCabineFull protection cabinDirect measuring systemDirect path measuring systemNC rotary table with pallet carrierNC rotary table with pallet carrier permissible load 500 kg / 1,100 lbs (no indexing table 360 x 1° in basic machine)Tool magazine, chain Vert., 60 pocketsTool magazine Vertical chain magazine with 60 tool pockets4. Axes (swivelling range) 360 x 0,001 degreeMaximum load (table centre) 500 KgTable surface 400 x 400 mmMotor spindle 18,000 rpmMain drive: Integrated motor spindle incl. active coolingSpindle taper CAT 40Speed range - 18000 rpmTorque (40% DC) 110 NmTorque (100% DC) 84 NmDrive power (40% DC) ...

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Working area 1Cross600 mmLongitudinal560 mmVertical600 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minCabineFull protection cabinDirect measuring systemDirect path measuring systemNC rotary table with pallet carrierNC rotary table with pallet carrier permissible load 500 kg / 1,100 lbs (no indexing table 360 x 1° in basic machine)Tool magazine, chain Vert., 60 pocketsTool magazine Vertical chain magazine with 60 tool pockets4. Axes (swivelling range) 360 x 0,001 degreeMaximum load (table centre) 500 KgTable surface 400 x 400 mmMotor spindle 18,000 rpmMain drive: Integrated motor spindle incl. active coolingSpindle taper CAT 40Speed range - 18000 rpmTorque (40% DC) 110 NmTorque (100% DC) 84 NmDrive power (40% DC) ...

A Maho CNC universal milling machine is available. Travel X/Y/Z: 600mm/450mm/450mm, tool holder: SK40, table diameter: 630mm, speed: 3150rpm, feed rate: 4m/min, rapid traverse: 6m/min, machine dimensions X/Y/Z: approx. 3000mm/2800mm/2200mm, weight: approx. 3500kg, control system: Philips CNC 432. An on-site inspection is possible.

A Maho CNC universal tool milling machine is available. Travel X/Y/Z: 600mm/400mm/450mm, table dimensions X/Y: 900mm/450mm, max. table load: 400kg, tool holder: SK40, speed: 4000rpm, feed rate: 4m/min, rapid traverse: 5m/min, tool stations: 20, milling head swivel range: +/-90°. Machine dimensions X/Y/Z: approx. 2450mm/3200mm/1900mm, weight: approx. 3200kg, control: Maho CNC 432, operating hours: 62908h. An on-site inspection is possible.

Manufacturer: Habrama Model: PPFM 3200 Year of Manufacture: 2008 Overhauled: 2025 (complete overhaul) Working Ranges - X-Axis (longitudinal): 3200 mm - Y-Axis (cross): 500 mm - Z-Axis (vertical): 410 mm - C-Axis: +30 degrees / -30 degrees Machine Table - Table Size: 390 x 4750 mm - Maximum Load: 6000 kg - T-Slots: 4 pieces - T-Slot Spacing: 90 mm - T-Slot Width: 18 H7 mm Axis Speeds and Accuracy - X-Axis Speed: 21 m/min, direct positioning accuracy +/- 0.002 mm - Y-Axis Speed: 10 m/min, direct positioning accuracy +/- 0.002 mm - Z-Axis Speed: 6 m/min, direct positioning accuracy +/- 0.002 mm - C-Axis Speed: 2 rpm, direct positioning accuracy +/- 0.003 degrees Milling Head - Drive Power: 45 kW (S6 at 40% ED) - Spindle Speed: 0 to 360 rpm - Maximum Cutter Diameter: 300 mm - Minimum Cutter Diameter: 125 mm + 2x cutting depth - Milling Capacity: up to Module 36 - Spindle Interface ...

This 10-axis CMZ TTL66 turn-mill centre was manufactured in 2025. It features a maximum swing diameter of 800 mm and a maximum turning diameter of 515 mm. The machine is equipped with twin spindles and twin Y-axis turrets, allowing for simultaneous 4-tool machining capability. If you are looking to get high-quality turning and milling capabilities, consider the CMZ TTL66 machine we have for sale. Contact us for further details regarding this machine.

Droop (small), Manufacturer: DROOP + REIN, Model: FOG 2500 HS11/13NW, Year of manufacture: 1995, Serial number 01028, Control, Manufacturer Droop + Rein, Type System IBF/Grundig Electronics, Table dimensions 5,000 x 3,000 mm, Travel X/Y/Z 4,500 x 2,500 x 1,200 mm, Spindle speed 10,000 rpm, Tool holder HSK 63/100, 32-fold tool changer, Tool monitoring, manufactured by Brankamp, WTS roller shutter cabinet, metal, equipped with 40 tool holders, drawer unit W 1,000 mm, 7 drawers, equipped with inserts, milling cutters, etc., mobile WTS frame, equipped with clamping devices and accessories 2 spare spindles, 16,000 rpm Droop (small), Manufacturer: DROOP + REIN, Model: FOG 2500 HS11/13NW, Year of manufacture: 1995, serial number 01028, control system, manufacturer Droop + Rein, type System IBF/Grundig Electronics, table dimensions 5,000 x 3,000 mm, travel range X/Y/Z 4,500 x 2,500 x 1 ...

This 5-axis MAKA Moving Beam with 840D was manufactured in 2013. It features a Siemens Sinumerik 840D control unit and a nominal power of 55 kW. With its advanced capabilities, this gantry milling machine is ideal for precision machining tasks. If you are looking to get high-quality milling capabilities, consider the MAKA Moving Beam with 840D machine we have for sale. Contact us for further details.

Machine Type: Milling Machine Manufacturer: Lid Type: 2102 / FP1 Year of manufacture: coming soon Condition: used / good Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference number M-DEC-0626 DESCRIPTION We offer you a used milling machine from the manufacturer Deckel. Control: TNC 113 Central lubrication Weight approx. 750kg Availability: CW27 / 2026 Our offer is aimed at tradespeople who are registered in the sense of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved

This 5-axis Huron K2X 8 Five gantry milling machine was manufactured in 2006. It features an impressive X-axis travel of 2,000 mm, Y-axis travel of 1,600 mm, and Z-axis travel of 1,100 mm. The machine includes a robust table size of 2,300 × 1,500 mm and a maximum table load of 4,000 kg. If you are looking to get high-quality milling capabilities, consider the Huron K2X 8 Five machine we have for sale. Contact us for further details.

Table dimensions: 1000-550 mm Control: Grundig x-travel: 1000 mm : ja milling-head swivable +/-: ja control: Grundig serial number: 0209 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 160 mm z-travel: 340 mm tool taper: SK40 Speed: 40-2000 U/min. control: Aktiv HEIDENHAIN table-size: 600 x 210 mm total power requirement: 2 kW weight of the machine ca.: 0,73 t dimensions of the machine ca.: TBH 1,20x1,10x1,60 m Comes from a vocational school - Powered feed in X, Y, and Z axes - Coolant system - Machine vice - Work light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1800 mm y-travel: 700 mm z-travel: 1200 mm : ja : 2 control: Heidenhain 155 table:: 700-2000 mm documentation: ja dismantled: ja weight of the machine ca.: 12,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Soraluce SLP-6000Year of manuf. : 2017 Control : Heidenhain TNC 640 Speed : 5000 rpmMovement X/Y/Z : 4500/1800/1300 mm____________Description:In General:Year of manufacture:2017Control system:Heidenhain TNC 640Travel range X/Y/Z:4,500/1,800/1,300 mmSpindle speed:5,000 rpmTool holder:SK 50Milling head (spindle):Technology:Diagonal head with gear spindleIndex:0.001°Speed:5,000 rpmTool holder:SK 50Max. power:43 kWMax. torque:1,045 NmCoolant supply:Coolant + blast airWorking table:Clamping surface:6,000 x 1,100 mmT-slots:6 x 22H12, spacing 140 mmTool magazin:Technology:Chain magazineNumber of stations:40Tool changer:Double gripper (horizontal/vertical)Max. tool diameter:125 (250) mmMax. tool length:400 mmEquipment:Position measurement systems:Direct scalesChip removal:Chip conveyorCoolant supply:Internal coolant system with filter, 20 barWorkpiece measurement:Funk M&H probeSet-up oper ...

SMEC NS 2000 MYear of manuf. : 2022 Control : Siemens SINUMERIK 828D Turning diam. : 288 mmTurning length : 243 mm____________Description:Main spindleTechnology:Belt-driven spindleSpeed:4,500 rpmPower (max.):20 kWBar capacity:67 mmWorkpiece clamping:3-jaw chuck, Samchully MH-208BV1Tool holder:Technology:12-station turretTool holder:BMT45Tool drive:5,000 rpmTravel in X/Y/Z:175/-/350TailstockTechnology:Manual adjustmentTubus stroke:80 mmTubus diameter:65 mmMount:MT4Features/Accessories:Chip Management:Chip ConveyorCoolant Management:IKZ Pump with Oil Skimmer and High Pressure, 10 barAutomation:PreparedFinished Parts Removal:Parts Catcher with Collection Box

Index R 200Year of manuf. : 2011 Control : Siemens C200-4D SL ____________Description:In General:Year of construction:2011Control system:Siemens 840 Dsl (C200-4D SL)Bar capacity:65 mmMilling spindles:18,000 rpmMain spindle:Technology:Motorised spindleSpeed:5,000 rpmMax. power:35.5 kWTorque max.:170 NmC-axis:0.001°Z-axis:390 mmBar capacity:65 mmClamping cylinder:Hollow clamping cylinderChuck:3-jaw chuckSub spindle:Technology:Motorised spindleSpeed:5,000 rpmMax. power:35.5 kWTorque max.:170 NmC-axis:0.001°X-axis:600 mmZ-axis:390 mmBar capacity:65 mmChuck:3-jaw chuckTool carrier I:Technology:Milling spindle on cross slideSpeed:18,000 rpmTool holder:HSK 40X-axis:350 mmY-axis:160 mm (+/- 80 mm)B-axis:230°Tool carrier II:Technology:Milling spindle on cross slideSpeed:18,000 rpmTool holder:HSK 40Y-axis:160 mm(+/- 80 mm)B-axis:230°Tool magazin:Technology:Chain magazineNumber of station ...

Table extensions  Table length 240 cm  Swivel range -10+45 Max. spindle protrusion 175 mm Motor 7.5 kw Weight 950 kg Compressed air 6 bar

Table milling machine with extended tables

TECHNICAL DATA: Milling machine: - Spindle diameter 30 mm - Spindle height 140 mm - Spindle lock - Height adjustment - Main motor 4 kW - Tool diameter max 300 mm - Sliding carriage 1400 mm in aluminium - 4 speeds Circular saw: - Max. saw blade diameter 300 mm - Max. cutting height 80 mm - Cutting width at the guide 600 mm - Main motor 3 kW - Saw blade adjustment (up and down - as well as tilt adjustment) - Carriage length 1400 mm - Casting table dimensions 1400 mm x 700 mm Transport dimensions: - L x W x H = 150 x 110 x 120 cm - Weight approx. 700 kg

Circular Saw Milling Machine  Machine stand can be moved with pallet truck  Front-facing operation  Front sliding slide lock  Bevel cuts with tiltable stop on the carriage  Milling spindle D 30 mm Casting table 1470 x 725 mm Table height from the floor 860 mm Aluminium sled 3160 x 275 mm Suction nozzle for milling machine and saw bottom 120 mm Milling fence with D 150 mm nozzle  Saw motor 4 kw Milling motor 4 kw Cutting height 110 mm Saw blade side adjustment 160 mm Milling Speeds 2900-4400-6000-8000-10000 3 table rings for slotting tools up to 350 mm Weight approx. 1100 kg  Other technical

Swivel spindle milling machine  Table width with carriage 900 mm  Work table 1000 x 550 mm Carriage 1150 x 350 mm Spindle diameter D30 mm Swivel range 90-45 Height adjustment spindle 175 mm Working height spindle 125 mm Max. tool diameter  for profiling D 180 mm for slitting D 250 mm Engine 3 kw / 4 hp Speed. 1400-3500-6000-8000 rpm Weight approx. 400 kg

Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, -Condition: Mill is equipped with a new set of blades, but without controls or sieve. -Manufacturer: H. Dreher, Side-mounted mill cutting mill -Type: S26/26 -Drive motor: 5.5 kW -Number of cutting blades: 4 pieces -Number of counter blades: 2 pieces -Sieve perforation: Ø 8 mm -Inlet cross-section: mm -Rotor width: 260 mm -Rotor diameter: 260 mm -Quantity: 1 cutting mill available Price: per piece -Dimensions: 650/1460/H1880 mm -Weight: 475 kg

Used 3-roll mill madr by Kofama type HWP322F3. New 1973. The machine is suitable for a wide range of applications: in the food, cosmetics and technical industries. It is equipped with roller gap adjustment, hydraulic control and easily removable components, which facilitates cleaning. Ideal for the production of small and medium-sized batches. Robust, industrial construction. Following servicing: springs, seals, oil, the pump and valves have been replaced.

workpiece dia.: 40 mm max. module: 2 min. module: 0,1 workpiece length - max.: 665 mm weight: 4,5 t spindle bore diameter: 82,5 mm Control: Siemens total power requirement: 5,5 kW Technical data max. module 2 Pitch 0.5 - 25 mm Number of speeds multi-speed / multiple max. workpiece diameter40 mm max. workpiece length180 mm Milling cutter diameter max.80 mm max. milling cutter width12 mm Z-axis (milling length with counter point)90 mm Z-axis (milling length without counter point)113 mm Milling head swivelling angle30° / 30° Description Gear hobbing and thread cutting machine. LAMBERT - 124 CNC The machine is in a well-maintained condition. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 7000 mm y-travel: 3200 mm z-travel: 1500 mm Control: Heidenhain TNC 530 table-size: 6000 x 3000 mm table load: - t spindle turning speed range: 6000 / 18000 U/min tool taper: ISO 50 / HSK 63 feed: 50000 mm/min spindle motor: 34 kW A-Axis: + / - 180 ° c-axis: 0-360 ° distance between columns: 4300 mm Passage height: 2300 mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: 12,2 x 9,3 x 5,9 m Equipped with: - Heidenhain TNC 530 CNC control - 1 milling head (TAEM) ISO 50, 6,000 rpm - 1 electric spindle head (TUPC) 18,000 rpm, HSK 63 - 1 extended head ISO 50, 6,000 rpm - 40-position tool changer (15x HSK A63, 25x ISO 50) - Coolant system (40 bar IKZ / 4 bar external) - CE mark - Enclosure The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Milling machine MH1600 The basic machine was built in 1990 but was rebuilt from scratch in 2015 by the company MMD Bad Emstal, as well as control conversion to iTNC530 (Guideways sanded and scraped, KGT new or overhauled, bearings new, etc. etc..) (so the machine was new again in 2015) iTNC530 IKZ air and water through spindle center Rotoclear Chip conveyor SK 50 Chain 32 WZ Transport beam Crane loading possible Machine is provisionally connected to the power connection and can be visited by appointment

milling machine, year 2009. Used machine in good condition. More info & price on IndustrialBuyer.

milling machine, year 1997, CNC TNC. Used machine in good condition. More info & price on IndustrialBuyer.

Key data: 2 , 1300 mm

Copy milling machine Longitudinal copy milling machine Wigo Automatic Double Copy Milling Machine Type: 1075 For milling 2 opposite sides, including rounding of the front Maximum working length for workpieces with straight ends: 1300 mm Maximum working length for workpieces with rounded ends: 1000 mm Working width maximum 200 mm Processing height 90 mm, including milling heads 90 mm 2 milling motors motor power approx. 5 kW Spindle diameter 30 mm With thrust rings Continuous table feed 0.5 – 12 m/min Hydraulic motor feed 1.1 kW Return speed 25 m/min. Speed of the milling spindles optionally 7500/9000 rpm. Tool diameter maximum 120 mm 4 pneumatic clamping cylinders from above Operating pressure max. 6 bar Weight approx. 900 kg Dimensions approx. 3200 mm x W 1200 mm x H 1600 mm It is particularly suitable for precise and serial processing of symmetrical wo ...

Used Reckermann Delta 1300 K, milling machine built in 1989, Working distances 1000x400x450mm, vertical speed range 60-3000 horizontal 30-1500 1/min, control Heidenhain TNC 151 weight 5000kg, Accessories: Tool holders.

Key data: 7000 mm, 1600 mm, 1400 mm

Complete system with all the accessories necessary for installation and operation, see below! x = 7000 y = 1600 z = 800 / w = 600mm General overhaul 2007, production year 1991: New Siemens Sinumerik 840D control system, new drive motors, guide guides renovated, new control cabinets. ECOCUT 1 was then operated for only a few months Rapid traverse 12000 mm / min / w axis 6000 mm / min Turntable TDV 2 max. workpiece weight 6t / clamping surface 1000x1000 Turntable TDV 3 max. workpiece weight 12t / clamping surface 1250x1600 Accessories: 2 angle milling heads / chain tool changing system / plate field / complete housing / Knoll hopper feeder / extraction / coolant system with belt filter. With all BWF fixators for the installation of machine bed and plate

With CNC control, HEIDENHAIN, type: TNC 155, with touch probe Travel: x=700 y=550 z=550mm. Size table area 1000 x 490 mm Accessories: Chip conveyor / coolant system / tool holders SK3. Machine is presentably ready for operation under power. Milling machine with protective cabin. The milling machine can be operated at any time without protective cladding and is then "quite handy". Dimensions of milling machine: , width is 1.6m, depth is 2.3m, height is 2.15m and cabinet width is 1.5m

This 7-axis Gildemeister GMX 400 Linear was manufactured in 2005. It features a maximum turning diameter of 640 mm and a turning length of 1585 mm. The machine is equipped with a Siemens Sinumerik 840D Powerline CNC control and offers rapid traverse speeds of 40 m/min in the X-axis. If you are looking to get high-quality turning and milling capabilities, consider the Gildemeister GMX 400 Linear turn-mill centre we have for sale. Contact us for further details.

Mill, slot 260 x 260 mm. 5.5 kW. With feeding belts, immediately available

Model: Hedelius BC60 Year of Make: 1998 Type: 3-axis machining center Control: Heidenhain TNC426 Total connected load: 40 kVA Weight: approx. 16500 kg Travel: X = 2,490 mm Y = 630 mm Z = 750 mm Table: X = 3,200 mm Y = 650 mm Groove spacing = 125 mm 20 grooves Spindle: Tool holder: SK40 Speed: 8000 1/min ICS and AKZ Tool changer 48 places Handwheel available 350L Coolant Tank Divisible workspace Chip conveyor The machine will be ready for collection from September.

Model: Metrom PG2000 Control: Andronic 2060 Year of Make: 2007 Axes: 5 Travel: X = 1,600 mm Y = 2,800 mm Z = 1,000 mm A = 90° C = 360° V = 3,200 (travel distance Pentapod on portal in Y direction) Table: X = 1,600 mm Y = 1,800 mm Groove spacing = 250 mm 20 mm grooves, 7 pcs. Spindle: HSK 63 Speed: 15,000 rpm IKZ and AKZ 25/32 kW Work table enlarged 200L Coolant Tank Automatic 3D button (Blum TC 50) Handwheel Incl. additional milling spindle Incl. holder Machine will be ready for collection from September.

For sale is a classic universal tool milling machine Deckel FP4A with Dialog 11 control. The machine comes from a company closure and was reliably in use until the end. The machine was stored and was not energized for a long time. Due to the downtime, the buffer batteries of the control system will probably have to be replaced and the machine parameters reset. Manufacturer: Lid Model: FP4A Control: Dialog 11 Tool holder: SK40 Working range approx.: X: 400mm / Y: 300mm / Z: 400mm The machine is at ground level and dry. The transport must be taken care of by the buyer himself. An indoor crane, pallet truck, forklift, etc. are available on site for loading. The machine can be viewed by appointment. To make an appointment, call 0171 216 414 3 from Mon. - Fri. 9:00 a.m. to 5:00 p.m.

For aluminium and PVC profiles Max. cutter diameter: 280 mm Max. milling length: 400 mm Max. milling depth: 110 mm Max. milling height: 150 mm Pneumatic material tensioners Automatic feed Minimum quantity spraying Weight: approx. 200 kg