rolling mill 400 used for sale

Max. tool weight 10 kg Max. tool length 350 mm Max. tool diameter 80 mm Tool holder HSK-A63 according to DIN 69893 Number of tool positions in the magazine 60 Spindle speeds - infinitely variable 50-10,000 rpm Number of pallets 2 Max. pallet load 400 kg Pallet size (lxw) 500 x 400 mm Pallet change time 8/5 s Coolant tank 1100 l Machine length 5800 mm Machine width 4800 mm Machine weight approx. 12.8 t Spindle power 24 / 37 kW Auction-ID: A1-50373-18

Douglas beams rough, with a size of 400 x 15 x 5 cm each. Auction-ID: A1-45120-2168

Polystar 400 DSM welder. Sealing possible such as aluminium composite films. Maximum temperature (°C): 300 Elec: 230 V/50 Hz Sealing Length (mm) 470 Auction-ID: A1-50994-24

Machine type: TUF 1400/1651 - 400 x 3200 Machine number: 2370002 Year of construction: 2023 Application: Separation of casting and sand Lining: Cuff wall 8 mm - HB 400 Trough Material: Normal Steel Displacement: Compression spring Vibration weight: 4600 kg Vibration distance: 8.5 mm Vibration frequency approx.: 16.6 Hz Material: Casting and sand Transport quantity: 120 moulds/h Mass flow sand: 95.04 t/h Diagonal size packed quantity: 1279 mm Temperature: 450 °C Auction-ID: A1-50656-44

3x set with Iiyama Prolite T1521MSC monitor, including 4th monitor, 2x handheld scanner Auction-ID: A1-50244-201

Tescom controllers consisting of: 1x 26-1763-24 4000 PSI 2x 44-1164-24-897 10,000 PSIG 1x 44-1862-24 6000 PSIG Auction-ID: A1-50846-227

Mobile welding machine with wall-mounted swivel arm with control unit length approx. 6 meters Auction-ID: A1-50660-631

12/24volt, max 300Ampere, without cables Auction-ID: A1-50903-50

Mobile welding machine with wall-mounted swivel arm with control unit length approx. 6 meters Auction-ID: A1-50660-619

Rated output 18.8 kVA Maximum power 20 kVA Voltage 230V / 400V Connections 32A & 16A Engine 2-cylinder diesel engine with electric start Fuel tank 46 litres Runtime 9 hours at 75% load Noise level 72 dB(A) @ 7 m Weight 334 kg (net) | 354 kg (gross) Alternator 15 kW Power factor 0.8 Control Brush & AVR-regulated ATS & Car connection Yes, for automatic switching and remote control Auction-ID: A1-40900-198

A spirit level is without a doubt one of the most valuable tools in your workshop and should therefore not be missing in the toolbox. This design combines a corner level with a snap hook and can therefore be used for a very wide range of projects. The model is equipped with a horizontal vial and equipped with a vertical vial and the degrees are clearly read thanks to the digital protractor. The graduation is analog and is represented as millimeters and as inches. After use, you fold the model together and you are left with a very compact design. This digital angle level and mop hook is the ultimate dream of every professional and hobbyist. The model has a backlit display that you can easily turn on or off and the model is equipped with a hold function. In addition, the digital angle level and mop hook comes with a 9 Volt battery, so you can get started right away with this very versatile ...

You must have the right electricity supplies for work. But if the nearest power point only supplies three-phase current, this is not always optimal. Especially when there are no other sockets nearby. The HBM 3 x 400 Volt and 4 x 230 Volt distribution block - earthed splits the power over multiple plugs, so you can connect equipment with different voltages. This distribution block is intended to distribute power current. Due to its IP value, the power strip is suitable for bathrooms and other sanitary areas, but also as an outdoor electricity supply placed directly against buildings. This way you always have power to work with multiple types of power tools at the same time. Just because of its versatility, this distribution block is always handy to have. Auction-ID: A1-40900-118

A distribution block comes in handy in every workshop. With a distribution block, you immediately ensure that you can easily connect multiple electrical devices and the power grid. With a distribution block, you choose an alternative to electrical cables or busbars. This model (earthed) has a cord with a length of 180 cm and is also equipped with the IP protection class IP44. A similar distribution block Schuko type E with pin earth can be ordered here HBM 2 x 400 Volt and 4 x 230 Volt distribution block Auction-ID: A1-40900-32

This lot has not been checked for functionality. The seller does not assume any warranty for the condition and functionality of the lot ; Auction-ID: A1-51150-139

Model 2026 3.5 tons 400x180 All info can be found on the last photo Due to different demos, the photos may be slightly different Auction-ID: A3-46140-5729

A distribution block comes in handy in every workshop. With a distribution block, you immediately ensure that you can easily connect multiple electrical devices and the power grid. With a distribution block, you choose an alternative to electrical cables or busbars. This model (earthed) has a cord with a length of 180 cm and is also equipped with the IP protection class IP44. A similar distribution block Schuko type E with pin earth can be ordered here HBM 2 x 400 Volt and 4 x 230 Volt distribution block Auction-ID: A1-40900-166

A distribution block comes in handy in every workshop. With a distribution block, you immediately ensure that you can easily connect multiple electrical devices and the power grid. With a distribution block, you choose an alternative to electrical cables or busbars. This model (earthed) has a cord with a length of 180 cm and is also equipped with the IP protection class IP44. A similar distribution block Schuko type E with pin earth can be ordered here HBM 2 x 400 Volt and 4 x 230 Volt distribution block Auction-ID: A1-40900-347

Stainless steel platform 12,000 x 2,400 mm Second-hand stainless steel platform designed to create a traffic, access or work area at height within an industrial, wine or agri-food site. Thanks to its generous dimensions, this platform makes it possible to create a safe passage around production equipment, tanks or machines, while facilitating control, monitoring and maintenance operations. Consisting of a piece of one piece 12 m long by 2.40 m wide. The auger formerly positioned under the platform is not included in the sale. Technical data Type: industrial platform Material: stainless steel Configuration: one-piece platform Number of elements available: 1 Usable area: 28.80 m² Use: circulation, access and work around industrial equipment Worm screws positioned under the platform: not included Dimensions Length: 12,000 mm Width: 2,400 mm Total area: 28.80 m² Number of pieces: 1 s ...

Important and outstanding design features of the RaptorX-SL with steel substructure in gantry design RaptorX-SL1200/S15 The range of applications of a RaptorX-SL CNC Fraesmaschine is variable due to the adjustable working area (through-lasshoehe under Bruecke: 150mm, 300mm or 400mm ) and the traversing height of 300mm in the Z-axis (at no extra charge) extremely large. Special size up to 17,500 mm (on one piece) x 3000 mm x 600 mm are feasible ! If you are interested please ask ! This way you are able to process plate materials with the greatest stability of the Z-axis just as accurately as 200mm high 3D-Koerper. Use the system as a plasma cutting system or waterjet cutting system, appropriate extensions are available. In the middle range of the machine (between the foot tubes) you can even process parts up to a height of 850mm (beam rail etc. ) or 3D body up to about 400mm h ...

Important and outstanding design features of the RaptorX-SL with steel substructure / The range of applications of a RaptorX-SL CNC Machine is variable due to the high-adjustable working area (read-through under bridge variable : 150mm, 300mm or 400mm ) and the 300mm travel height in the Z-axis (no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ) ...

Complete system with all accessories required for installation and operation, see below! Travels x = 7000 y = 1600 z = 800 / quill stroke w = 600mm General overhaul in 2007, year of production 1991: New control system Siemens Sinumerik 840D, new drive motors, guideways refurbished, new control cabinets. ECOCUT 1 was only operated for a few months thereafter Feed rate 12000 mm / min // w axis 6000 mm / min Xua2eg8fx Rotary table TDV 2 max. Workpiece weight 6t / clamping surface 1000x1000 Rotary table TDV 3 max. Workpiece weight 12t / clamping surface 1250x1600 Accessories: 2 like new angular crankset / chain tool change system / plate field / complete housing / Knoll funnel feeder / extraction / coolant system with belt filter All BWF fixators for installation of machine bed and panel

1 gebr. Corundum disc mill type T4, in vertical version Technical data: Make: KORUMA Type: T4 Drive power: 18.5 KW three-phase motor (completely new drive motor) Operating voltage: 400 V, 50 Hz, 3 phases Protection: IP 54 Speed: 3000 rpm Material of the product-contacting parts: 316 L (1.4404/1.4435) Shaft sealing: shaft sealing ring Side seals: EPDM Connections: Suction side DN 80 DIN 11851 Capacity: 300-1800kg/h Grinding discs: 240mm Gehäuse_ with double sheath for heating/cooling

Shell end mills, shell mill cutters, milling cutters, disc milling cutters, slot milling cutters -Disc milling cutter: 105 x 19 mm, cross-cut -Socket: Ø 27 mm -Weight: 0.8 kg

Usable for the: Milling and engraving labeling, marking Drilling, cutting Dosing and much more. (Applications require optional accessories) inclusive: Design software ConstruCAM 3D Control software KinetiC-NC incl. CAM software Estlcam Multi-zone vacuum table with recessed T-nuts sliding Control panel including step control manual central lubrication The offer here is a CNC milling machine with the above-mentioned accessories (without further ado possibly shown on the photos accessories). For operation, a milling motor is also required, which can optionally be purchased from us. echnische data: External dimensions LxWxH: 1650x1440x1950 mm Weight: approx. 650 kg Clamping surface XxY: 930x630 mm Travel XxYxZ: 900x600x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reverse play: appr ...

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

Usable for the: Milling and engraving labeling, marking Drilling, cutting Dosing and much more. (Applications require optional accessories) inclusive: Design software ConstruCAM 3D Control software KinetiC-NC incl. CAM software Estlcam Multi-zone vacuum table with recessed T-nuts sliding Control panel including step control manual central lubrication The offer here is a CNC milling machine with the above-mentioned accessories (without further ado possibly shown on the photos accessories). For operation, a milling motor is also required, which can optionally be purchased from us. Technical specifications: External dimensions LxWxH: 1970x2150x1950 mm Weight: approx. 950 kg Clamping surface XxY: 1230x1320 mm Travel XxYxZ: 1200x1300x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reve ...

End Milling Machine Drill Milling Machine working width mm: 3200 Left - right swivelling saws from 0° - 45°. Complete with drilling unit Suitable for machining doors and door posts.

Party incl bins Auction-ID: A1-50076-319

Auction-ID: A1-50076-310

64 pieces Auction-ID: A1-50076-277

For sale is the four-roller grist mill of the Seeger brand, which can be seen in the pictures The mill was in use in a brewery until the end and is functional. The bearing has already been overhauled on the predecessor. Specifications: Manufacturer: Seeger Model: VSM 350 Capacity: 750 kg/h Measurements: see last picture

For Sale Used Corundum Disc Mill / Mustard Mill MK95

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 33064 Year of construction approx. 1960 Overhauled in 2012Travel distances X: 300 mm Y: 150 mm Z: 330 mmTable size 600 x 210 mmSpindle holder MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 1.1 and 1.4 kWNerg connection 380 volts, 50 Hz- Feed in the X and Y axis- Pinol displacement on the vertical milling head- Fixed angle table- Coolant device with mechanical pump in the machine foot-

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 52185/08 Year of construction 1968Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 250 mmSpindle holder SK 40 - S20 x 2Spindle speed 40-2000 rpm. 16 stagesMotor power 1.0 and 1.4 kW pole-switchableMains connection 380 volts, 50 Hz- Feed in the X and Z axis- Two motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm- Fixed angle table- Coolant device in the machine foot- Adjacent control cabinet- Counter holder

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 51265/08 Year of construction approx. 1967Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 2100 mmSpindle holder SK 40 - S20 x 2Spindle speed 40-2000 rpm. 16 stagesMotor power 1.0 and 1.6 kW pole-switchableMains connection 380 volts, 50 Hz- Feed in the X and Z axis- Spindle speed over 2 motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm- Fixed angle table- adjacent control cabinetSpace requirement L x W x H 1100 x

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 28317 Year of construction approx. 1960Travel distances X: 245 mm Y: 150 mm Z: 340 mmTable size 600 x 210 mmSpindle holder horizontal MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 0.8 and 1.1 kW pole-switchableMains connection 380 volts, 50 Hz spindle speed over 2 motor speeds and 6 gear stages- Feed in the X and Z axis coolant device with mechanical pump in the machine base

End mill, end mill, cutter, shell cutter, milling head, angle cutter, shell angle cutter, angle end mill, prism cutter -Angle milling cutters: Attachment angle milling cutters, prism milling cutters -Type: Ø85 x 35 mm -Hole: Ø 27 mm -Quantity: 1x milling cutter available -Dimensions: Ø 85 x 35 mm -Weight: 0.8 kg

- Fast comminution with rotational speeds up to 400 rpm - Loss-free grinding even below 1 μm - Uniform fine comminution of large sample amounts - Safe tensioning of the bowls with Safe-Lock-System - Useful capacity up to 4 x 225 ml Currency; MYR PIC: - Ms. Fatimah (013 628 7197/ fatimah_asmadtopglove.com.my) - Ms, Farha ( 01111936236/ nurfarha_atopglove.com.my)

15 pieces with setting machine and 3d probe Auction-ID: A1-50076-312

MAPAL heavy-duty CNC milling tool assembly with multiple replaceable indexable inserts and integrated machine-tool holder. Auction-ID: A7-50717-233

Lot of 6 assorted industrial milling cutters. Several are large indexable cutters fitted with replaceable cutting inserts. Visible markings include WALTER 280×30 WIDIA TH10, 280×30 A12, and IPR 250-1-16, ges. gesch. The lot also includes a large helical/form cutter. Auction-ID: A7-50717-212

Mecanumeric Normaprofil T2515 CNC portal milling, year of construction 2009. Machine suitable for processing plastics, composites, wood, resins and non-ferrous metals such as aluminum. Equipped with a vacuum clamping table, automatic tool changer, CNC control and extraction connection. The machine has a gantry construction and is designed for processing large workpieces. The T2515 model has a working range of approximately 3,100 × 2,100 × 870 mm. The manual control and head changer on the right side are defective and need to be checked. ATTENTION The machine must be disassembled by the buyer himself. Auction-ID: A3-46133-34030

Manufacturer: Otto Martin Maschinenbau, Ottobeuren Type: T23 Year of Make: 1978 Serial number: V 101199 Stationary Table Milling Machine / Spindle Milling Machine for Woodworking Manual height and milling settings Solid machine table with milling fence With mounted feeder from HOLZ-HER Feed apparatus for uniform workpiece feeding Extraction connection available Machine can be seen in the video machining a workpiece Auction-ID: A1-50373-8019