rolling mill 400 used for sale

diameter range 1,6-4 mm shaft length under head 50 mm max. thread length 30 mm output pieces/min 300-750

vibratory feeder diameter range 2,5-6 mm shaft length under head 80 mm max. thread length 40 mm output pieces/min 600

vibratory feeder diameter range 4-12 mm shaft length under head 150 mm max. thread length 105 mm output pieces/min 80-260

tube feeder for studs and headless parts diameter range 6-12mm shaft length under head 95 mm max. thread length 90 mm output pieces/min 55

vibratory feeder diameter range 3-8 mm shaft length under head 80 mm max. thread length 55 mm output pieces/min 300

vibratory feeder diameter range 3-8 mm shaft length under head 80 mm max. thread length 55 mm output pieces/min 300

vibratory feeder diameter range 6-12 mm shaft length under head 170 mm max. thread length 102 mm output pieces/min 125

Large slewing bearings, slewing ring, single-row ball slewing ring, four-point bearing -comes from: HUSS Rides, manufacturer of leisure facilities -Replacement part: from Top Junior 70011-15 -Manufacturer: Rothe Erde -Type: 2-060-40-0490-001 63132-609 -Type: 2.060.40.0490.001 63132.609 -Outer diameter: 625 mm -Inner diameter: 354 mm -Height: 90 mm -Quantity: 3x available in storage -Price: per piece -Weight: 122 kg

Flat-jaw thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, knurling machine, thread rolling machine -Manufacturer: EWM, flat jaw thread rolling machine knurling machine -Type: unfortunately without type designation -Drive: 4.6/5.8 kW 1435/2890 rpm -Belt drive: 3-way adjustable -Knurling plate: RAA 1.0 -Central lubrication: -Dimensions: 1680/920/H1440 mm -Weight: 1308 kg

Model UM900 Conditie Gebruikt Voorraad nummer 2360 Belt width 900 mm Power 3 x 400V, 50Hz, 16A Dimensions 1550 x 1200 x 1700 mm

ORT RP30 C thread rolling machine 2-roll 30 tons electronic control of pressure (Ton), speed and position. Brushless motors for the rotation of the rollers Possibility to memorize the parameters for the piece., The machine is visible working in our warehouse in Gussago BS. Test possibility Mimu Machine Tools Rolling is a mechanical processing without chip removal that can be performed cold or hot, having as an aim the improvement of the surface finish (therefore the apathetic behavior of the material., Power (Ton): 30, Number of rollers: 2, PLC: YES

A Frenco workshop gear testing device is available. Bed length: 590mm, min. center distance: 45mm, max. center distance with fine adjustment/without fine adjustment/without intermediate plate: 105mm/155mm/320mm, repeatability: 1.5µm, intermediate plate length: 210mm, max. worm diameter: 78mm, center distance (worm lengths): 0mm-220mm, measuring table dimensions X/Y/Z: 800mm/700mm/940mm. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 330kg. Documentation available. An on-site inspection is possible.

Long rolling station Lippelt 800 Year of manufacture: 2018 Working width: 800 mm Pressure roller in the inlet adjustable in height and side Knitted board, adjustable With indexing roller on transfer belt (pneumatic) Flour shaker with electrically adjustable flour quantity incl. 2 containers Pressure roller on the spout, height and side adjustable Belt speed adjustable Machine can work in stand-alone operation

A dough sheeting machine Fritsch for folded dough sheets for subsequent processing is available. Belt width: 700mm, working width: 650mm, roller gap range: 0.3mm-50mm, roller diameter: 98mm, max. dough block weight: approx. 20kg, belt speed: 50m/min, machine dimensions X/Y/Z: approx. 3300mm/1250mm/1550mm, weight: approx. 500kg. An on-site inspection is possible.

Rolling workstation Q-Wall approx. 200 cm

Rolling work desks approx. 60wx140h cm approx. 28 pieces

Rolling device final assembly approx. 140 cm with ultrasonic welding machine, lighting

Rolling work table approx. 160 cm, with sloping superstructure

Rolling work table approx. 200x200 cm Workstation 501, w. thermal transfer printer CAB Squix, internal PRSBG74, 2x ultrasonic converter IBFM USG612

Rolling workstation STIER 1,600x2,500h mm, real wood panel, electrification, packing space 217

Rolling workstation approx. 120x200 cm, electrification, veneering assembly BMW

Rolling workstation approx. 160 cm

Rolling workstation illuminated superstructure approx. 150 cm

Rolling workstation with illuminated superstructure

Rolling workstation with illuminated superstructure approx. 140x225h cm

Rolling workstation light superstructure approx. 150 cm Production order, without chute

Rolling side table approx. 115x80 cm

Rolling bases LOGIFORM each approx. 120x60 cm approx. 9 pieces, with aluminium table

Rolling workstation illuminated superstructure approx. 150 cm Q-Wall

Viewing by appointment Specification Value Type Vibratory Pneumatic Tire Roller Operating weight 8,500 kg Max. ballast weight 9,100 kg Power 77 kW / 103 hp Speed max power 1600 rpm Drive Hydrostatic, AWD Speed up to 9 km/h Climbing ability 38% Working width 1960 mm Total width 2200 mm Total length 4540 mm Altitude (ROPS) 2995 mm Wheelbase 3000 mm Ground clearance 285 mm Fuel tank 130 litres Hydraulic tank 65 litres Water tank spray system 600 litres Tire configuration 3 front / 4 rear Tire size 17/70-20-12PR Auction-ID: A1-43890-32

Viewing by appointment Specification Value Type Vibratory Pneumatic Tire Roller Operating weight 8,500 kg Max. ballast weight 9,100 kg Power 77 kW / 103 hp Speed max power 1600 rpm Drive Hydrostatic, AWD Speed up to 9 km/h Climbing ability 38% Working width 1960 mm Total width 2200 mm Total length 4540 mm Altitude (ROPS) 2995 mm Wheelbase 3000 mm Ground clearance 285 mm Fuel tank 130 litres Hydraulic tank 65 litres Water tank spray system 600 litres Tire configuration 3 front / 4 rear Tire size 17/70-20-12PR Auction-ID: A1-43890-30

Viewing by appointment Auction-ID: A1-43890-34

Max. load 400 kg, floor load 200 kg Auction-ID: A1-46480-3059

can be loaded with forklift Auction-ID: A3-43525-11836

Viewing by appointment Auction-ID: A1-40377-12

Viewing by appointment Specification Value Type Vibratory Pneumatic Tire Roller Operating weight 8,500 kg Max. ballast weight 9,100 kg Power 77 kW / 103 hp Speed max power 1600 rpm Drive Hydrostatic, AWD Speed up to 9 km/h Climbing ability 38% Working width 1960 mm Total width 2200 mm Total length 4540 mm Altitude (ROPS) 2995 mm Wheelbase 3000 mm Ground clearance 285 mm Fuel tank 130 litres Hydraulic tank 65 litres Water tank spray system 600 litres Tire configuration 3 front / 4 rear Tire size 17/70-20-12PR Auction-ID: A1-40377-23

Viewing by appointment Specification Value Type Vibratory Pneumatic Tire Roller Operating weight 8,500 kg Max. ballast weight 9,100 kg Power 77 kW / 103 hp Speed max power 1600 rpm Drive Hydrostatic, AWD Speed up to 9 km/h Climbing ability 38% Working width 1960 mm Total width 2200 mm Total length 4540 mm Altitude (ROPS) 2995 mm Wheelbase 3000 mm Ground clearance 285 mm Fuel tank 130 litres Hydraulic tank 65 litres Water tank spray system 600 litres Tire configuration 3 front / 4 rear Tire size 17/70-20-12PR Auction-ID: A1-40377-10

Telescopic conveyor belt, 3 part extendable, sideways mobile, 400v electrically driven, control box available, cable mast available. Auction-ID: A1-45845-3

Auction-ID: A1-43429-100

excl. tools; equipped with Heidenhain CNC control; machine works well but has little play on the X axis

Batch ball mill made in Germany with a gross volume of 400 l., drive via V-belt and gear motor with 2.2 kW, iron-free lining (aluminium oxide), previous use: glaze production in the wet grinding process. Cleaned, repainted and restored. Available for an extra charge: iron-free grinding media (balls, alubit).

excl. tools; equipped with Heidenhain CNC control; machine works well but has little play on the X axis Auction-ID: A1-45793-12

CNC Milling Machine - Heidenhain TNC 310 with handwheel - hydr. Tool Clamps - Central lubrication - Coolant system - Machine light - Machine feet - Enclosure x-travel 600 mm y-travel 400 mm z-travel 400 mm Table size 800 x 400 mm Spindle holder ISO Sk 40 Spindle speeds: 10 - 3150 rpm Quill stroke mm Total power requirement 12.0 kVA Machine weight approx. 2.2 t Dimensions L x W x H 2.0 x 1.85 x 1.95 m Auction-ID: A7-46460-587

Kat-No 09-1020 Flat bottom tank/storage tank made of V2A 40,000 litres in very good condition! Standard equipment with: • with manhole front DN 400 x 300 mm • with residual drain DN 50 mm (DIN 11851) • with 2 x connections on the manhole DN 50 mm (DIN 11851) • with level indicator DN 10 with shut-off valve • with connection cover for agitator • with filling pipe DN 30 mm • with 2 x transport eyelets •with central threaded connection socket Dimensions and weight: Diameter:2800 mm Diameter Cyl. with filling pipe upwards:3000 mm Total height:6700 mm Weight approx:3 to For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage technology and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermedia ...

Cat.-Nr. 10-1460 in a very good condition Tecnical Details: Production Capacity: 40 boxes/minute Year of Construction: 2008 6 Cups/Tray = 240 Cups/Minute = 14.400 Cups/h each Cup 125 g Measurements: Packing Sizes – LxWxH: 698,5x168,0x1,5 mm Lid – LxDxH: 95,5x95,5x9,0 mm Cup – DxH: 92,5x42,0 mm Machine Measurements: LxWxH: 7500x7400x3000 mm Weight: approx. 6800 kg Operating Instructions available Original Price: Euro 655.000,00 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Manufacturer PWH Flow capacity 400 m3 hour of bulk material Grit 0 to 30 mm Bulk weight 0.84 to 0.90 to / m3 Water content 18% Heap height 12 meters Operating voltage 380 V Control voltage 220 V Bucket capacity: 100 litres • Number of shovels: 8 pieces • Bulk per minute: 60 • Theoretical power: 360 m3/h • Effective power: 280 m3/h • Bucket wheel diameter: 3.45 m • Circumferential force (wheel): 15,000 N • Cutting speed on the knife: 1.35 m/sec • Removal height (heap height): 12 m • Discharge of the lowered wheel: 11 m • Lifting height on the paddle wheel: 6 m • Lifting speed on the paddle wheel: approx. 3 m/min • Senovice speed on the paddle wheel: approx. 3m/min • Swivel speed: approx. 12 m/min • Angle of rotation of the trolley (suspension): 360 • Angle of rotation of the trolley

Cat.-Nr. 09-1020 in a very good condition Standard Features: • with Manhole DN 400 x 300 mm • with Outlet Discharge DN 50 mm (DIN 11851) • with 2 x Connections on Manhole DN 50 mm (DIN 11851) • with Level Indicator DN 10 with Valve • with Connecting Flange for Mixer • with Filling Tube DN 30 mm • with 2 x Transport Hooks • with Connection Thread Measurements and Weight: Diameter: 2800 mm Diameter Cyl. incl.Filling Tube: 3000 mm Total Height: 6700 mm Weight approx: 3 ton For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Extrusion press with 400 mm , drive 55 kW, hard casting screw wings and pre-press PZSVG 40 (Built 1996, drive 15 kW), on 4 hydraulic spindles. Complete with 1 spare part set screw and reel.

Manufacturer: Risco Intestinal holding device of the company RISCO: Intestinal holding device type RS 153 for filling machine RS 1040 , RS 4000, RS 4001, RS 5001 Extra accessories: holding rollers, filling tube, mounting kit Request an offer iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko biala USt-IdNo.: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36 info@inter-wiba.com.pl abc.inter-wiba.com.pl

Servomotor, 330V, 4000 rpm, B2.SM.000-4400, KEB, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, - Unfortunately, the packaging is not visually perfect on the outside., - Shaft D11mm, centring D60mm, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our  ...