We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,916 used machines on RESALE, but how to find them? Machine Search
used
2 pieces rollable, un driven roller conveyors, approx. 2,50m length - used - : Price per piece ex location: 950.-€ (net), dismantled, packed and loaded! Manufacturer: Year of construction: Length approx. 2,50m Element width: c. 69cm Roll width: approx. 60cm Height: approx. 81cm Condition: good Available: from the end of Oct./Nov. 2021 Location: Tübingen
used
Offer 1 mixing container Böllhoff stainless steel 250 l D=85 x165cm with lid, Basic emptying + device for level measurement Fig. 1-5 ! Please do not ask for scrap recycling. Capacity: 250 l Diameter: approx. 60cm Height: approx. 90 cm The plant is still located at the site in Halle Saale. It is sold ex works EXW. The plant was used to store/mix paints for the paint shops. The facility is empty. 1 mixing container Böllhoff stainless steel 500l D=85 x165cm + level measurement photo 6-8 VB 490 € also agitator + 190 € VB and 7 paint mixing buckets agitator tank Drais 300 l steel very stable rollable VP 1990 € without photo Compressed air technology such as: -Compressed air system Kaeser Kompressor.SC 121, dryer DC 75E and.. Plastics technology such as: • 9 injection moulds for the production of castors for furniture and accessories Metalworki ...
used
Tumbler IGLU 250 in good used and functional condition. Completely made of stainless steel, 250 litre drum, vacuum, rollable, analog control. Dimensions W/D/H 95/150/180 cm. Operating voltage 400 volts. Workshop-tested, ready for immediate use. More on request.
used
Pieces of dough: 10-300 gr. Power: 10-60 pieces/ min digital control Stainless steel cladding rollable on rolls
used
Agitator 150 litres with agitator 0.55 KW, 900 rpm and inclined blade stirrer 244 mm Container: Single-walled stainless steel container 150 litres with drain tap. Rollable aluminium frame with aluminium profiles 45 45 mm. 4 steering wheels, 2 of them with brake. Electric motor: Used, powerful electric motor Baumüller, 0.6 kW, 900 rpm, 3 x 230/400 volts. With motor protection plug. Shaft: precision stainless steel shaft D20, length 700 mm, diameter 20 mm, Material stainless steel 1.4301. Coupling: Rigid shaft coupling, material stainless steel 1.4571 Stirrer: Two-winged slanted blade stirrer, diameter 244 mm, material stainless steel 1.4581, wings adjustable at angle.
used
Portioner/filling station in a good used and functional condition. Suitable for liquid and viscous products. Completely made of stainless steel, rollable, pneumatic contact. Dimensions W/D/H 110/110/140 cm. Operating voltage 400 volts. Workshop-tested, ready for immediate use. More on request.
used
Rheon Cornucopia Type: KN200 Dough pieces: 10-300 gr. Capacity : 10-60 pieces/min digital control Stainless steel cladding rollable on wheels Height: 160cm Width: 80cm Depth: 150cm
used
Thread rolling machine make FETTE type R 40Fabr. -No: 818 built in 1980Technical specifications:Metric thread rolling range: 12 - 39 mmThread rolling range inch: 7/16 - 1 1/2 large rollable thread length: 500 mmSpindle passage: 46 mm6 spindle speeds: 250 - 2000 rpm.Gr. clamping diameter of the vice: 70 mmClamping stroke: 40 mmInfinitely variable feed rate: 600 - 3500 mm / minRapid forward / rapid return: 9 m / minTotal power requirement: 18 kWDimensions L x W x H: 1830 x 900 x 1145 mmWeight approx: 1000 kgWith- Hydraulic unit for clamping and feeding- cooling device- separate control cabinet- Thread rolling head FETTE type FU 34/1used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your ...
used
Loading / loading for boilers or similar in a very good used and functional condition. Custom order / manufacturer unknown. Completely made of stainless steel, rollable, including basket, basket size B/D/H 105/85/70 cm. Dimensions W/D/H 170/100/250 cm. Workshop tested, ready for use. More on request.
used
Module rack trolley rollable with SK50 holders and mounting accessories Width approx. 110cm SK50 cutter head diameter 200mm SK50 cutter head diameter 125mm SK50 reduction to MK2 SK50 reduction to SK40 SK50 corrugated spider holder 8mm SK50 cutter mandrel 32mm SK50 corrugated spider holder 25mm SK50 cutter mandrel 32mm with disc cutter 125x10mm SK50 Reduction MK4 SK50 roughing cutter 50mm SK50 reduction SK40 with boring head 60-100mm SK50 Reduction MK2 SK50 holder with roller end cutter 84x100 with internal cooling SK50 reduction MK2 with chuck 0-10mm SK50 reduction SK40 with cutter head 65mm SK50 corrugated mandrel holder 12mm SK50 Reduction MK4 SK50 holder with cutter head diameter 200mm SK50 corrugated mandrel holder 20mm SK50 corrugated spider holder 16mm SK50 holder with cutter head 125mm SK50 roller milling cutter 80mm SK50 holder with corner knife head 80mm ...
used
Conveyor belt / climbing belt (inchGiraffeinch), built in 2013, in a very good used and functional condition. All metal parts made of stainless steel. Plastic conveyor belt, 45 cm wide, with takers. Rise height 210 cm. Machine is rollable. Speed infinitely adjustable. Connection values 400 volts, 0.55 kW. Workshop-tested, ready for immediate use. More on request.
used
Offer 7 paint mixing buckets mixing tank agitator tank Drais 300 l rollable (for e.g. Drais color mixing unit (dissolver) type RN 218) Fig. 1-7 The paint mixing buckets were part of a wallpaper production plant in Halle and were used as accessories for the Drais-Farbmischwerk type RN 218 (sold). Technical data (partly estimated or from reference plants): Manufacturer: Drais Designation: Paint mixing bucket Mixing tank Agitator tank Year of construction: probably 1985 Material: sheet steel Inner diameter: 80 cm Height: 80 cm (overall) Weight: approx. 130 kg Quantity: 7 pieces with paint residues. Also available in parts for 290€/piece. further assets from this plant: -for material separation centrifuge SZB0 1000C 960 1/min 6 loads/h The centrifuge was part of a wallpaper production plant. After cleaning the tools, it is used to separate the plastisol from the ...
used
Würschum semi-automatic 4-fold filling line Pneumatic filling machine with four filling stations For liquid and viscous products The filling machine has a pneumatic drive for the linear movement of the dosing piston in the stainless steel cylinder. Limit switches define very precisely the volume that the dosing piston sucks in. The dosing volume is set manually with a milliliter scale and a handwheel. This model requires only a compressed air connection, electricity is not required. The suction and dosing speed can be adjusted to the product viscosity by means of throttle valves. With an optional pneumatic manual screwdriver, the containers can be closed immediately after filling. The machine table can be rolled and can be moved to another room for cleaning after the end of production. Applications: Production and Laboratory Chemical industry Cosmetics i ...
used
Lock Box Milling Machine Chain Clamp Chain Milling Machine Door Lock Milling Machine HAFFNER Type: SL100 3 Aggregates Chain stemmer. Stülpfräe Handle / door lock cutter rollable The machine originates from the age-related abandonment of a small construction and cabinetmaking workshop and is available now. Dismantling and loading can be organized by us. Settlement by appointment. Buyers can also pick up and test the machine themselves on site. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are a guideline. Depending on the agreement of dismantling and loading, or removal, these m ...
used
Agitator 150 litres with gearbox Rexroth 0.18 KW, i = 25 and propeller stirrer 150 mm Container: Single-walled stainless steel container 150 litres with drain tap. Rollable aluminium frame with aluminium profiles 45 45 mm. 4 steering wheels, 2 of them with brake. Geared motor: Rexroth, 3 x 230/400 volts, 0.18 kW, i = 25, n2=53 rpm. With motor protection plug. Shaft: precision stainless steel shaft D10, length 850 mm, diameter 10 mm, Material stainless steel Coupling: 2 clamping sets 17 to 10 mm, material stainless steel Stirrer: three-winged propeller stirrer, diameter 150 mm, material stainless steel 1.4581
used
Vacuum packaging device CRYOVAC BM5 M340 in good used and functional condition. Combination of vacuum packer and clipper (manufacturer Tipper Tie). Designed for bags/bags, for simple packaging of poultry and large pieces of meat. Machine is rollable. Dimensions B/T/H 100/70/150 cm. Operating voltage 400 volts.
used
Platform scales, platform scales, floor scales made of stainless steel MINEBEA - Sartorius type IFS4-600LL-I Cleanroom scale Fabr. Ref: 379 383 79 Year of construction: 2019 Weighing capacity max. 600 kg section 25-1500 kg / 0.5 kg Platform size 1000 x 1000 mm Platform height approx. 30 mm Mains connection 220 volts, 50 Hz - Completely made of stainless steel 1.4301, suitable for food industry or midizin technology- Display unit, evaluation device CAIS 1 (Fabr. No. 37967266) - Calibration class III- Ramp for driving onto the weighing platform - Rollable via height-adjustable transport rollers Space requirements L x W x H 1250 x 1150 x 90/200 mm Weight 130 kg Transport package 1500 x 1250 x height 500 mm Weight with packaging 170 kg very good condition, as good as new (probably unused); used
used
Stirring tank 150 liters with agitator 0.6 KW, 900 rpm and inclined blade stirrer 244 mm Container: Single-walled stainless steel tank 150 liters with drain tap. Rollable aluminum frame with aluminum profiles 45 45 mm. 4 swivel castors, 2 of them with brake. Electric motor: Used, powerful electric motor Baumüller, 0.6 kW, 900 rpm, 3 x 230/400 volts. With motor protection plug. Shaft: Precision stainless steel shaft D20, length 700 mm, diameter 20 mm, Material: Stainless steel 1.4301. Coupling: Rigid shaft coupling, material stainless steel 1.4571 Agitator: Double-bladed inclined blade stirrer, diameter 244 mm, material stainless steel 1.4581, blade adjustable in angle.
used
Mesh and intestinal retracting device Wiegand NetMan NE-30 in a very good used and functional condition. Special machine for the production of rolled roasts, salmon, nut or cooked ham. Completely made of stainless steel. Purely pneumatic drive (external compressed air supply 6 to 14 bar required), 70 cycles/minute, chamber length 300 mm. Several shapes of different sizes are available. Machine is rollable. Dimensions B/T/H 180/50/120 cm. Workshop-tested, ready to use. Further on request.
used
Offer Centrifuge SZB0 1000C 960 1/min 6 loads/h for separation of Plastiso and Parex Photo 1-9 The centrifuge was part of a wallpaper production line. After cleaning the tools, it is used to separate the plastisol from the parex. Manufacturer: VEB Chemieanlagenbau Staßfurt Maschinfabrick Sangerhausen Type: SZB0 1000C Ref. 5604 Year of construction: 1986 Speed: 960 1/min Load: 145 kg Internal volume of the drum: estimated 200 liters Max clearance: 6 loads/h Power supply: 380V 3~ 50 Hz 5.5kW Weight: 1660kg Condition: used, stored, worked until siling and on 7 Paint mixing buckets Mixing tank Agitator tank Drais 300 l Photo 10-12 The paint mixing buckets were part of a wallpaper production plant in Halle and were used as accessories to the Drais paint mixing plant type RN 218 (sold). Technical data (partly estimated or from comparison plants): Manufacturer: ...
used
Offer Forklift STILL EFG 1.5 o. R50 3 Wheeled forklift Trplex approx. 4 m lifting height with charger Picture 1-8 The forklift truck is being relocated from another location due to a business change and is now being sold at our customer's site. So far, it is ready for operation and working. It was still used from time to time. The nameplate is not legible. Data partly taken from comparable types from our exploitation. The forklift is still in use intermittently. Manufacturer: Still Type: verm EFG 1.5 or R 50 1.5 Tricycle Forklift No. 50148424? Year of construction: unknown older Hours: 60848 Load capacity: 1500 kg UVV: no needs to be renewed Technical and visual condition: ready for use, severe signs of wear, UVV no needs to be replaced, see photos Length: approx. 1700 mm Width: approx. 1000 mm Height: approx. 1930 mm Tyres: good Mast Type: Triplex Lifting ...
used
Tumbler Inject Star HS-7 180 L in a good used and functional condition. Completely made of stainless steel. Rollable 180 liter drum with vacuum connection. Machine can be tilted. Dimensions W/D/H 76/110/110 cm. Connected values 400 Volt, 0,75 kW. Workshop tested, immediately ready for use. More on request.
used
Collection container, transport container rollable AGIE volume 525 l inside Dimensions: 600 x 490 x 1790 mm Accessories for AGIE CUT 300 ! Dimensions: 670 x 530 x 1900 mm
used
Shell sealer Rühle VR1, built in 2005, in a good used and functional condition. Metal parts made of stainless steel. Packaging machine / tray sealer with scale and label printer, weighs, packs and labels the goods in a single operation. PC control. Supplied with two mould inserts. Machine is prepared for fumigation. Machine is rollable. Dimensions W/D/H 60/70/170 cm. Power ratings 230 Volt, 1,5 kW. Workshop tested, immediately ready for use. More on request.
used
We sell here a belt scraper from the manufacturer Weber, type ASB 600/2 in a very good used and functional condition. The machine runs on 400 volts, 0.7/0.85 kW, complete stainless steel, bandwidth 30 cm, rollable, workshop tested, ready for immediate use, dimensions B/D/H 80/110/120 cm, more on request.
new
Unused, soundproofed, rollable, diesel generator set built in 2023 with key start Manufacturer: PLUS POWER Type GF2-6 - Electric Start Power 7 kVA 5,5KW Year of construction 2023 Hours 0 Engine 1 cyl, diesel with starter and battery, very economical! Key Start Generator 3 phase, 220/380V, 9.5A, 50Hz, Soundproofed incl. spare fuel filter, air filter and heavy-duty rollers. Dimensions width approx. xxcm, depth approx. xxcm, height approx. xxcm, weight approx. xxkg. Unused, immediately available. The device must be filled with engine oil before it can be put into operation! Incl. spare air filter, spare fuel filter, heavy-duty rollers, hopper. Imported by: MEDIAMQ OP VALENCIA S.L. C/ Bonaire 4 46389 Turis (Valencia) Spain Sale price
used
We sell here a portioner / screw conveyor from the manufacturer Meyn in a good used and functional condition. Runs on 400 volts, year of construction 2001, completely stainless steel, speed adjustable, rollable, for loading and portioning, 100 liter funnel, workshop tested, ready for immediate use, dimensions W/D/H 150/110/230 cm, others on request.
used
Scissor lift table trolley, scissor lift table, scissor lift table, scissor lift platform, scissor lift platform, single scissor lift table, Prül assembly table, assembly table -Manufacturer: Seco, scissor lift table, rollable, type SHT35 -Load capacity: 350 kg -Platform: approx. 900 x 600 mm -Dimension retracted: height 430 mm -Dimension extended: height 1070 mm -Number: 2x lifting table available -Price per piece -Transport dimensions: 950/600/H430 mm -Own weight: 75.5 kg/pc.
used
sheet width: 4000 mm plate thickness: 4,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 8,50 t dimensions of the machine ca.: m Controlled back gauge up to 1,000 mm Side stop and table extensions cutting length limitation cutting edge lighting Protective fence, rollable with safety switches The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
tool taper: MK4 diameter of tools max.: Ø 145 mm table-size: L: 800 x B: 700 mm surface area: Ø 300 mm table travel: 200 mm total power requirement: 7,5 kW weight of the machine ca.: 4,9 t dimensions of the machine ca.: 2,8 x 1,5 x 2,3 m Additional information: Application: Gear hobbing machine for gear cutting of spur and helical gears, worm gears and rollable profiles Cycle milling and single milling as well as up-cut and climb milling Specifications for machining spur and worm gears: -Outer Ø max. 250mm with counterholder -pitch max. 5mm -Tooth helix max. 45° -Tooth width max. axial milling 200mm and radial-axial milling 240mm -Milling width max. clamping table counterholder 655mm Milling slide: -swivelling 210° -travelling distance 350mm -feed, 2 directions, 16 steps in the range 0.2 - 6.3 mm/revolution Further features: -counter-point taper MK4, co-rotating -Centre distance of ...
used
We are selling here a flow-through dishwasher from the manufacturer Meiko, type KA 15 in a very good used and functional condition. Runs on 400 volts, 44 kW, for E2 boxes, one man operation, automatic cleaner feeder, rollable, overhauled, workshop checked, immediately ready for use, dimensions W/D/H 90/320/155 cm, others on request.
used
Key data: 2 mm, 50 mm
Edge banding machine Edge banding machine OTT Type: 20S Edge banding with hot melt glue glue basin Plastic edges up to 2 mm Solid wood edging up to 20 mm Flush milling units at the top and bottom Profile milling units at the top and bottom Edge grinding unit rollable The machine originates from the age-related abandonment of a small construction and cabinetmaking workshop and is available now. Dismantling and loading can be organized by us. Settlement by appointment. Buyers can also pick up and test the machine themselves on site. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping c ...
used
Dough filling and dosing machine Rheon KN 200 Cornucopia used Rheon KN 200 dough filling and dosing machine.The machine has been tested for function, can be viewed and tested in the warehouse in Bielefeld. We will be happy to send you further pictures and information on request. - Dough pieces: 10-300 gr. - Output : 10-60 pieces/min -digital control - Stainless steel cladding - rollable on wheels - used Rheon KN 200 for bakery confectionery
used
We are selling here a non-woven fabric from the manufacturer Maja, type EVM 437 in a very good used and functional condition. Runs on 400 volts, cutting width 43 cm, completely stainless steel, rollable, workshop tested, immediately ready for use, dimensions W/D/H 70/70/100 cm, others on request.
used
sheet thickness - max.: 1,5 mm Roller stands: 7 Profile height max.: - mm speed: 15 m/min total power requirement: 2,2 kW weight of the machine ca.: 260 kg dimensions of the machine ca.: 1,5 x 0,6 x 1,15 m Electric 380 Volt: Forming head made of two divided all-steel side links between which the shafts run in needle bearings on both sides. The head is mounted on an all-steel housing in which the drive motor is housed. Machine rollable. The set of rollers is probably standing seam, but on the other hand we cannot describe the profile rollers. The buyer must obtain the appropriate roller set. Selling due to owners illness and retirement. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
We are selling here a non-woven fabric from the manufacturer Maja, type FEM 435 in a good used and working condition. Runs on 400 volts, cutting width 43 cm, completely stainless steel, rollable, workshop tested, ready for immediate use, dimensions W/D/H 70/60/90 cm, others on request.
used
sheet thickness - max.: 1,5 mm Roller stands: 7 Profile height max.: - mm speed: 15 m/min total power requirement: 2,2 kW weight of the machine ca.: 260 kg dimensions of the machine ca.: 1,5 x 0,6 x 1,15 m Electric 380 Volt: Forming head made of two divided all-steel side links between which the shafts run in needle bearings on both sides. The head is mounted on an all-steel housing in which the drive motor is housed. Machine rollable. The set of rollers is probably standing seam, but on the other hand we cannot describe the profile rollers. The buyer must obtain the appropriate roller set. Selling due to owners illness and retirement. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
We are selling here a belt rinder from the manufacturer Weber, type ASB 800/2 in a very good used and functional condition. Runs on 400 volts, 0.7/0.85 kW, supply and discharge belt, new belts, cutting width 35 cm, completely stainless steel, rollable, workshop tested, immediately ready for use, dimensions W/D/H 65/160/120 cm, others on request.
used
Key data: 3000 mm, 500 mm, 480 mm
Offer Vertical machining center AXA VSC 2-3000 SMK built in 1996 with tool presetter cup Kalimat 250 + pico A1 Picture 1-10 The machining center is sold to our customer due to a business change. The customer must participate in the dismantling and loading by professionals. Indoor crane 8t is available. Manufacturer: AXA Maschinenbau Schöppingen Machine no.85506 Year of construction:1996 Running hours 21808 elect. X-axis stroke 3000mm /2 x 1000mm Y-axis stroke 500mm Z-axis stroke 480mm Spindle version SK 40 SMK changer for 30 tools Movable control panel with CNC path control Heidenhain TNC 407 right Switchboard Ball Roller Screw Measuring system Heidenhain Central lubrication unit Vogel Mini MFT Hydraulickapggregat Hydac Chip conveyor Connection 400/230 V, 63A Connected load: 28 kW Dimensions mm approx.: L 5010, W 2700, H 2900 ? Weight 6400 kg Accessor ...
used
Drawer cabinet, tool cabinet, rollable VERSATOOL INDUSTRIAL FURNITURE and STORAGE SYSTEMS 1450 x 600 x 1270 mm (usable size) 30 x drawer: width: 600 mm, depth: 400 mm, height: 75 mm 2x sliding door, lockable with key ! Material: Stainless steel ! weight approx. 600 kg used, tested ! Dimensions: 1490 x 600 x 1550 mm
used
Tool cabinet, drawer cabinet, rollable HAHN & KOLB 820 x 740 x 1260 mm ( usable dimension - width x depth x height ) 9 drawers 600 x 690 mm ( width x depth ) 8 x approx. 130 mm, 1 x approx. 40 mm height 4 swivel castors used, tested ! Dimensions: 820 x 740 x 1560 mm
used
We offer: Chiller Air-cooled chiller Climaserv GFC-F 260 ST 260 kW Cooling capacity in container outdoor standing on the roof The machine was used to cool the liquid circuit of the waste heat generated in the wallpaper production plant during the printing process. The system comes from a vinyl structure wallpaper manufacturer. The buyer is responsible for the dismantling, loading and transport from the specified location in the hall of the purchased machine. Costs: approx. 2500 € net.. Offer is outdated. Specifications Basic: Manufacturer: Geoclima S.r.l. Type: Climaserv GFC-F 260 ST Type of installation: Container on roof in the open air Series: CS 9010 Year of construction: 06/1999 Power consumption:101,5kW Rated Current:162.5A Starting Current:301A Max.Operating Current:225.5A Operating Current: 400V/50Hz/3~/PE Control current: 230-24V/50Hz/1~/PE Metric ...
used
Thermal transport container rollable MBB Conveyor and lifting systems FIXOTHERMER TYPE 6 volume 570 l inside Dimensions: 600 x 650 x 1430 mm outside Dimensions: 730 x 810 x 1730 mm Weight: 113 kg
used
Refrigeration unit, heat exchanger, cooler, chiller PHÖNIX HOCHVACUUMTECHNIK RUDOLSTADT CCS 1000RE Cooling capacity at circulation temperature 32 °C: 1 kW / 10°C Machine cooling capacity: 900 m3 Air Ambient temperature range: -25°C - 50°C Cooling air volume flow: 9,350 m3/h Tank capacity: 8.0 l Flow rate: approx. 3.0 l/min connected load: 1.3 kVA operating voltage: 230 V 1AC 50 Hz control voltage: 230 V AC rollable, 2 swivel castors with parking brake, 2 fixed castors used, tested ! Dimensions: 1150 x 425 x 830 mm
used
Refrigeration unit, heat exchanger, cooler, chiller PHÖNIX HOCHVACUUMTECHNIK RUDOLSTADT KRY 450mb Cooling capacity: 0.4 kW at circulation temperature 32 °C Thermal output: approx. 1.0 kW Machine cooling: 1250 m3/h Air Connected load: 2.1 kVA Operating voltage: 400 V 3AC 50 Hz Control voltage: 24 V DC back-up fuse: 3x 16 A rollable, 2 swivel castors with parking brake, 2 fixed castors used, tested ! Dimensions: 1400 x 950 x 950 mm
used
Welding machine, robot Welding source OERLIKON, OERLIKON COMMERCY SOUDURE CY 385 MPR Welding current: 50 A / 16.5 V - 420 A / 35 V supply voltage: 220 / 380 V 3AC Power consumption: 44 / 25 A Connection cable: approx. 5.5 m Gas hose: approx. 4.0m Working surface: 960 x 550 mm Working height: 1000 mm rollable, 2 fixed castors, 2 swivel castors with brake used, tested ! Dimensions: 1110 x 570 x 1070 mm
used
Welding machine, robot Welding source OERLIKON, OERLIKON COMMERCY SOUDURE CY 385 MPS Welding current: 50 A / 16.5 V - 420 A / 35 V supply voltage: 220 / 380 V 3AC Current consumption: 44 / 25 A Connection cable: approx. 4.0 m Gas hose: approx. 3.0m Working surface: 960 x 550 mm Working height: 1000 mm rollable, 2 fixed castors, 2 swivel castors with brake used, tested ! Dimensions: 1110 x 570 x 1070 mm
used
Hydraulic precision press Make: JOSSI (CH) Type: HP-5-N Pressing force: max. 5 to (50 kN) Operating pressure: max. 200 bar Installation height: max. approx. 120 mm. Projection: approx. 105 mm. Piston stroke: max. approx. 90 mm. Mounting hole in the piston: 14 mm. Table mount, height adjustable. Incl. 2 hand controls and/or foot release with switch and rollable base. Unfortunately, the table top is missing. Weight: approx. 350 kg, dimensions WxDxH: approx. 85 x 55 x 190 cm. Good used and ready for use. The machine can be viewed and demonstrated under power.
used
We sell here a bacon cutter from the manufacturer Rühle, type SR1 Turbo in a very good used and functional condition. The machine is built in 2004, runs on 400 volts, rollable, completely stainless steel, 1 set of cheese creels, 1 interchangeable creel 6/15 mm, workshop tested, ready for immediate use, dimensions W/D/H 100/60/110 cm, others on request.
used
Offer 1 mixing tank Böllhoff stainless steel 500l D=85 x165cm + level measurement Foti 1-8 ! Please do not ask for scrap recycling. The plant is still located at the site in Halle Saale. It is sold ex works EXW. The plant was used for storing/mixing paints for the paint shops. The facility is empty. It consists of the following technical components: Container Manufacturer: Böllhoff Verfahrenstechnik Type: Storage tank 500 liters Year of construction: verm. 1991/92 Dimensions: approx. D = 85 x 165 cm Dimensions container inside: D=80x108 with Level measurement probably VEGA 10702.20 Capacitive Probe Level Indicator Vega with Stainless steel connection In addition to the tank, there is a separate lid with a geared motor for an agitator, see photos. Surcharge 190 € Manufacturer of transmission motor: Greifenberger Antriebstechnik Markredewitz Engi ...