126,693 used machines on RESALE, but how to find them? Machine Search
Set of 70 bearing housings and roller bearings, SKF, SNR, INA… , mint condition Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, An exceptional special price of € 6 per item, excluding VAT. The original price is at least 10 to 15 times higher. We can divide the bearings into 3 groups: 1) Approx. 44 pieces in original cardboard packaging 2) Approx. 15 pieces in original foil packaging 3) Approx. 11 pieces open, unused, fully functional bearings. See stock list on photo. Minor defects of 1-2% possible. These are brand-name products only. Due to the extremely low package price, we cannot offer any guarantee/warranty in this case. For these goods, we must exclude the buyer's war ...
Lot of approx. 265 small roller bearings, SKF, FAG, INA, , mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, An absolute special price of € 0.7/piece excluding VAT. The total original price is at least 7 to 10 times higher. We can divide the bearings into 3 groups: 1) Approx. 225 pieces in cardboard or foil original packaging, including one item with 50 pieces (various SKF items such as minimal bearings, seal sets, etc.). Many bearings are from a large package where the individual bearings are not packaged. 2) Approx. 40 open, unused, fully functional bearing units. See bearing list on photo. Minor erro ...
Dematic roller curve left 90°-500-440 IR795 RA2351 Make: Dematic Running direction: 90° left running Roller width (RB): 440 mm conical, plastic coating Nominal/outer width (NB): 500 mm Inner radius (IR): 795 mm 3x 300-500V Height frame: 132 Height including motor: 275 Gear motor: SEW WF20 DT71D4/Z/MM03/BW1 Conveyor speed: 0.6 m/s Optionally available supports side guides Frequency inverter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Drive type: Round belt Construction year: 2005 condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 500 Roll width in mm: 440 angle: 90° Driven: YES scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and imp ...
Dematic roller curve right 90°-500-440 IR795 RA2462 Make: Dematic Running direction: 90° right running Roller width (RB): 440 mm conical, plastic coating Nominal/outer width (NB): 500 mm Inner radius (IR): 795 mm 3x 300-500V Height frame: 132 Height including motor: 275 Gear motor: SEW WF20 DT71D4/Z/MM03/BW1 Conveyor speed: 0.6 m/s Optionally available supports side guides Frequency inverter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Drive type: Round belt Construction year: 2005 condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 500 Roll width in mm: 440 angle: 90° Driven: YES scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and i ...
This MACRI PROVAR 6-45 U-D was manufactured in 2022. It features a maximum steel bending capacity of à 45x4 mm and stainless steel up to à 40x3 mm. With a bending angle of up to 190° and speeds reaching 450 mm/sec on the X axis, this roll bending machine ensures precision and efficiency. Consider the opportunity to buy this MACRI PROVAR 6-45 U-D roll bending machine. Contact us for more information about this machine.
Roller conveyor curve 90 degrees Manufacturer: Soco System Condition: Used Model: Rollers Type: 90° degree Total width outside: approx. 1430 mm Total width inside: approx. 820 mm Total width incl. motor: approx. 580 mm Conveyor width: approx. 410 mm Roller spacing: approx. 60 mm Wheelbase: approx. 110 mm Roller Type: Plastic Material: Steel/Plastic Color: Zinc Plated, Light Gray, Orange Including 2 motors Soco 0.12 KW Stock: 4 pieces Price per piece The conveyor technology ran until dismantling. Condition: fully functional, with signs of wear Ideal for fast material transport Internal Article Number: 2026020302 Pick-up address: Industriestraße 5 (47918 Tönisvorst) Expertly dismantled and packed Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutio ...
This UZMA MAKINA UZH76 was manufactured in 2016. It features a maximum tube diameter of 76 mm, a bending radius of 250 mm, and a wall thickness capacity of 4 mm. The bending angle reaches up to 190° with a speed of 48°/sec. Powered by a 13 kW total motor capacity and a hydraulic pressure of 140 bar. Consider the opportunity to buy this UZMA MAKINA UZH76 plate rolling machine. Contact us for more information.
This Metallkraft RBM 4 HMS Pro 3050-150 plate rolling machine was manufactured in 2022. It features a robust welded construction, induction-hardened rollers, and a hydraulic drive for the upper roller. The machine includes three digital displays for precise roller adjustments and a hydraulic folding plate for easy workpiece removal. Ideal for heavy industrial use with options for conical bending. Contact us for more information about this machine.
This 6-axis PEDRAZZOLI Bend Master 42 MRV IMS CNC was manufactured in 2001. It features a max tube diameter of 42 mm, a min tube diameter of 6 mm, and a max bending radius of 270 mm. With a power of 22 kW and a bending length up to 3000 mm, consider the opportunity to buy this PEDRAZZOLI Bend Master 42 MRV IMS CNC roll bending machine. Contact us for more information about this machine.
Features: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Material: Steel Length of the elements: approx. 2000 mm, approx. 2500 mm, approx. 3000 mm Total length: approx. 470 meters Total width: approx. 530 mm Conveyor width/roller width: approx. 495 mm/ approx. 505 mm Conveying height including feet: approx. 250 to 290 mm Roll cross-section: approx. 80 mm Wheelbase: approx. 200 mm Color: Green & Gray Frame height: approx. 80 mm Frame thickness: approx. 05 mm Drive Type: Gravity Available now approx. 470 meters in stock Price per meter Internal Article Number: 2026020502 Thanks to the excellent workmanship of the roller conveyor, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyor ...
roller conveyor 1500/2500/3000-740-700 RA2294 Make: Blume Roller width (RB): 700 mm Nominal/outer width (NB): 740 mm Length: 1500/2500/3000 mm Roller diameter: 50 mm Roller distance: 100 mm Motor Roller conveyors: no motor Height frame: 60 mm Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: condition: good (used) Nominal / outside width in mm: 760 Roll width in mm: 700 Roll division in mm: 100 Driven: NO For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics
A complete Budde roller conveyor system for packaging delivery packages etc. is available. Conveyor width: 800mm/1000mm, overall width: 14m, total length: approx. 100m. Including motors, control system, control cabinets and complete electrics. Documentation available. On site inspection is possible.
used
Picot 2100 x 10 mm Number of rolls: 3 rolls Roll capacity cold: 2100 x 10 mm Roll dia upside: Ø 240 mm Dia under roll - side rolls: Ø 180 mm Weight: 3200 kg
Three Broich conveyor belts are available, length conveyor belt 1/2/3: 4400/4070/5500mm, width conveyor belt 1/2/3: 1400/1900/1400mm. An on-site inspection is possible.
Automatic roll stippling machine with pallet magazine Kalcher STA-K - Type: STA-K - Year of construction: 2000 - Pallet magazine with 16 supports - Machine for one-man operation for forming Kaiser, Stern, Salz or Poppy seed (button) and pressure rolls
Pallet lift table/ pallet turner Manufacturer: Overbeck Year of Make: 2014 Condition: Good (Used) Drive Type: Chain Drive Total length: approx. 1300 mm Total width incl. motor: approx. 1200 mm Total width without motor: approx. 970 mm Roll width: approx. 945 mm / Usable width: approx. 880 mm Roll diameter: approx. 80 mm Wheels: 7 pieces Wheel spacing: approx. 200 mm Stock: 2 pieces Price per piece Internal Article Number: 2026030301 The conveyor technology ran until dismantling. Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or t ...
Offer 26035 Technical data - Three driven rollers, each roller hydraulically adjustable - For bending and conical rolling, side bracket can be swivelled out - Operation of swivelling control panel with digital actual value displays - Max. working width 3050 mm - Max. sheet thickness at 400 N/mm² without bending 20 mm - Bending at bending diameter min 5 x top rolling. 16 mm - Upper roller diameter 340 mm - Side roller diameter 250 mm - Lower roller diameter 300 mm - Drive 400 V / 9.5 kW - Working speed adjustable - Space requirement approx. W 6200 x H 1650 x D 1650 mm - Weight machine approx. 16000 kg - Total weight machine + support mast + support arm 19500 kg with: - Extended roller ends for attaching profile rollers - Conical bending device - Side support arm hydraulically movable - Upper support mast hydraulically movable
Container roller set, container rollers for moving standard containers, Haacon, 16 to load capacity – used -: Price from location: 7.500.-€ (net) Manufacturer: Haacon Type: 4336.16-231720 Year of Make: 2022 Factory number: 1074982-01-00-001-51 Component Number: 215993 Load/set: (4 units): 160kN Load/Unit: 60kN Rolling speed: max. 6km/h Container castors for moving standard containers Handlebar for handling the roller when dismantled and for resteering with parking brake Castor set consisting of pull linkage, four swivel castors, lockable in the direction of travel Taxiing up to 6 km/h Former new price: 9.907.-€ Available: immediately Condition: like new – only used about 3 times Location: 79183 Waldkirch
Technical data: - Galvanized version with collection container + hydraulically operated lifting roof - Load up to 35 t - Volume of double-walled collection container 2000 l - Distance between running track and roof / lateral opening height 1500 mm - Max. interior height 2300 mm - Connection 400 V - Space requirement approx. L 7100 x W 3300 x H 3050 mm - Weight approx. 7000 kg - from warehouse D - 14943 Luckenwalde
sheet width: 2050 mm plate thickness: 4,5 mm pre-bending: 4,0 mm min. dia.: 210 mm roll diameter: 140 mm weight of the machine ca.: 1530 kg dimensions of the machine ca.: 3220x1200x900 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : 2024 : 9729 : prompt, Zwischenverkauf v : Türkei : 28450 € : 488.96 € : 1 : 25600 € : 1550 mm : 7 mm : 7 mm : 4.5 mm : 4.5 mm : 3.5 mm : 150 mm : 150 mm : 130 mm : 1,5 / 6 m/min : 4 kW : 3750 mm : 960 mm : 1100 mm : 2500 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: (time of deliver with options approx. 10 weeks) Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of ...
We sell a WP roll press type Rotamat EN . Bakery condition
Roll bending machine manufactured in 2020. This Metallkraft GBP BASIC 26100 features a pressing force of 100 tons and a maximum bending length of 2600 mm. It is equipped with an 11 kW engine and has an oil tank capacity of 150 liters. If you are looking to get high-quality bending capabilities, consider the Metallkraft GBP BASIC 26100 machine we have for sale. Contact us for further details.
used
Qty. 1 Second-hand 20-Hi Sendzimir Rolling Mill Mfc.: SUNDWIG, PAULY, ABB, Schneider Type: 20-HI – WV 20 SHE Built: 1988 Revamping: 2018 Mechanical & electric including new AGC and X-ray thickness gauge Strip width: 300 – 670 mm Thickness: 0.8 mm Exit: 0.01 mm Rolling speed: 300/500 m/min. Rolling materials: Stainless steel, Copper, Invar, Nickel, Si steel, Mo, Ti
Record Gr.2 Semi-Automatic Roll Press Dough Dividing and Rounding Machine - Manufacturer: Record - Semi-automatic bun press - Size 2 - Weight range: 25- 85 grams - 30 pieces - 380 volts - Machine is completely NEW painted
A four-roll plate bending machine Kramer is available. Working width: 2000mm, max. plate thickness: 3mm, power: 3kW. An on-site inspection is possible.
Erika Record Automatic 3-30 Roll Press Dough Dividing and Casting Machine - Manufacturer: Karl Schmidt GmbH - Model: Erika Record Automat - Type: 3-30 - 30 pieces - Incl. 3 plastic knitting plates - Machine is mobile on castors - Machine is technically and optically in very good condition Technical data: - Weight range : 30gram to 100gram -Dough insert: 900 grams to 3000 grams - Year of manufacture: refurbished 2016 - 400 volts
sheet width: 3355 mm plate thickness: 63,5 mm roll diameter: 686 mm voltage: 400 V total power requirement: 150 HP weight of the machine ca.: 95 t dimensions of the machine ca.: 62 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 2000 mm turning diameter over slide rest: 1050 mm turning length: 7000 mm speed: 1,6 - 250 U/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Compact roll line , for sliced, pressed products There are 3 different tools available. Machine is in good condition and can be tested with dough at any time. More pictures can be sent if desired.
Item condition: in working order Availability: as of now Year of construction: 1999 Year of construction Eberhardt: 2013 Technical data: Output adjustable: 4 rows up to 3600 pieces/h, 80-160gr. 5-row up to 4500 pieces/h, 40-90gr. 6 rows up to 5400 pieces/h, 40-90gr. Connected load: 1.87 kW, 2.1 kVA Performance and weight ranges are indicative. Depending on the dough and proofing, the values may vary. Dimensions in mm Stuppling system Cutting machine A 1020 1215 B 890 890 C 1600 1600 D 1700 1700 E 2720 2420 F 2810 2730 Pre-proofing zone, plunger station and automatic stacker in one compact unit: After rounding, the dough pieces are automatically placed in the robust pre-proofing hanger. A ...
Control: SINUMERIK 840 D rolling power: 800 kn diameter max.: Werkstück: 250 mm work piece width: 80 mm spindle diameter: 110 mm : 100-700 1/min power capacity: 110 kW length: 2600 mm width: 2600 mm height: 2600 mm weight: 12,5 t Mandrel diameter: 45–100 mmScope of deliveryCentral lubrication, stepless speed control, proportional measuring system, linear mandrel guide, process monitoring for the mandrel, process data management, rolling equipment, distributor 130–190 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ORT RP12, 2-roll, 12 ton, Thread rolling machine, The machine is in our warehouse, under power
A Krollmann pointing and rolling machine for pointing wire, round, and bar material in preparation for drawing processes is available. Machine body swivel: 90°, shear: available. Wire diameter range: 0.5mm-8mm. An on-site inspection is possible.
Carl Wezel Cold Rolling Mill BW500/420 Strip Rolling Mill Overhauled Carl Wezel Cold Rolling Mill BW500/420 Strip Rolling Mill Overhauled Manufacturer: Carl Wezel Maschinen- u. Werkzeugfabrik Type: BW500/420 Year of Make: 1975 Machine Type: Cold Rolling Mill / Strip Rolling Mill Modernization: Bühler-Würz Kaltwalztechnik GmbH Type: Wezel Rolling Mill Year of Make: 2015 Operating Voltage: 3AC 400V Frequency: 50 Hz Total connected load: 25 kVA Total current: 36 A Control voltage: DC 24V Location: Pforzheim
sheet width: 1000 mm plate thickness: 3,0 mm distance between columns: 1050 mm diameter of upper rolls: 90 mm total power requirement: 1,1 KW weight of the machine ca.: 0,47 t dimensions of the machine ca.: 1,7 x 0,8 x 1,35 mm Sheet metal bending machine with custom dimensions: - Capacity 1050 x 3.0 mm - Digital display - Hardened rollers - Conical bending - Swiveling top roller - Brake motor - Safety device: Emergency stop cord - Documentation in English - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bread press Fortuna Automat A 4 E Dough dividing and rounding machine with stainless steel blade Dough insert 1200 to 3600 g, Dough divider with knitting plate Connection 400V, 16A-CEE plug Used machine from the bakery
Bread roll line Lippelt Mini-Rustica GST Head machine for special square rolls with guillotine and punching device Belt flour for infeed belt Touch control, Rumo Seed Station Connection 400V, 16ACEE plug Used machine from the bakery
Fortuna Premium K bread roll line Fortuna combined bread roll line Head machine dough part and knitting machine Primus 4-row built in 2019 Spreader belt & proofer with transverse discharge Connection 400V 16-A CEE plug Used machine from the bakery
Bread roll system Stainless steel clad digital control consisting of: Head machine type K5 Weight range up to 110gr Settling device with long-rolling station Trigger length adjustable 60/40 to 60/100cm mobile - Bakery condition/not cleaned
Bread Press Erika Record Automat Erika Record Automat 30pcs Part head NEW revised Stainless Steel Knife NEW only DGUV V3 tested by us Connection 400V, 16A-CEE plug Used machine overhauled Warranty
Bread roll line Iris Gulliver 20 Special For all special rolls, grain rolls Simple and efficient production of all kinds of square dough pieces. Whether triangular, square or rectangular, Weight range: from approx. 25 to 800 grams only DGUV V3 tested by us Connection: 400V, 16A-CEE plug Used machine
Roll Press Record Machine Dough part and knitting machine Erika Record Automat Roll press for dividing and rounding with knitting plate Connection 400V, 16A-CEE plug Used machine
Bread Press Fortuna Semi-Automatic Dough dividing and rounding machine Semi-automatic 30-piece Parting head NEWLY revised only DGUV V3 tested by us Connection 400V, 16A-CEE plug Used machine overhauled
Bread Roll Press Eberhardt Optimat S Subrange 30 to 90 grams/piece Dough insert 900 to 2800g Dough divider with 3 knitting plates Connection 400 V, 16A-CEE plug Used machine
WP Pallet Swampler ST. A+PM Pallet shoppers Werner & Pfleiderer Model: ST. A+PM with stamping boxes 5 x 7 for Kaiserbrötchen Stüpfler drivable Connection 400V, 16A-CEE plug Used machine
Dough dividing and rounding machine Bread Press Fortuna Automatic A 3 H + Partial head reworked with stainless steel knife NEW Dough insert up to 2400g Dough divider 30 pieces Connection 400V, 16A-CEE plug Used machine overhauled
used pastry forming roller Kalmeijer KGM Kipferl 1380-910BProduct descriptionManufacturer: KalmeijerType: KipferlNr.: 1380-910Bowant: usedDough figure:Dimension: 40x34 mmThickness: 7.5 mmWeight: 6 grRoller width: 250 mmDetails see pictures.
maximum number of results exceeded
please refine your search
