roll used for sale

sheet width: 2100 mm plate thickness: 8,0 mm ST pre-bending: 6,0 mm ST diameter of upper rolls: 190 mm side roll diameter: 150 mm diameter of lower rolls: 170 mm total power requirement: 3,0 kW weight of the machine ca.: 3.290 kg. dimensions of the machine ca.: 4042 x 1380 x 1254 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual The data for this ad was created with ModulMW ...

sheet width: 1600 mm plate thickness: 15,0 mm ST pre-bending: 13,0 mm ST diameter of upper rolls: 230 mm side roll diameter: 210 mm diameter of lower rolls: 190 mm total power requirement: 7,5 kW weight of the machine ca.: 4225 kg. dimensions of the machine ca.: 4000 x 1300 x 1440 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual The data for this ad was created with ModulM ...

Capacity plate width up to 3000 mm thickness 22 mm plate prebend 18 mm dual prepinch technical data: -length of rolls 3100 mm -top roll dia. 350mm -lower roll dia. 330mm -Hydraulic power unit with 20Hp motor -Electric supply Vac 400/50 – 480/60 Configuration complete: -Hardened surface of the 4 rolls -Conical plate bend hydraulic attachment. -hydraulic power driven rolls rotation with gear unit axial each -Synchronized hydraulic power dragging . -front open drop-end to remove closed shells. -Calibration re-rolling feature for welded shells Safety configuration in compliance. Control console electric commands with digital readout Predisposed ready to connect nr. 1 central hydraulic support for large dia. nr. 1 side arm hydraulic to hold in place think plate sheet being formed

Thread rolling machine, ESCOFIER H20Z, 2-roll, 2 moving heads (in sync), 2 - 20 Ton rolling pressure, workpiece diameter: 75mm max., tool diameter: 140-200 mm, Max plunge width 160 mm, Shafts dia: 69.95, Swivelling: +/-6°,, New: 2003, under power in our warehouse, M i M u machine tools

Inv. Num. : 8649 Type: R16A-II Producer: TSUGAMI Generated: Parameters: Rolling force: 160 kN Max. diameter: 75 mm Max. length: 150 mm Weight: 2500 kg

Knapp transfer roller conveyor Toothed belt slider 90° 525-690-625 RA1890 Make: Knapp Running direction: both directions Roller width (RB): 625 mm Nominal/outer width (NB): 690 mm Length: 525 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V 0,25 kW Motor Roller conveyors: Interroll EC300 24V Height frame: 170 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Pneumatic lifting of the transfer belt Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: condition: very good (used) angle: 90° nominal voltage: 24V, 380-500V Conveying length in mm: 525 Nominal / outside width in mm: 690 Roll width in mm: 625 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive , Interroll EC 300 KW: 0,25 Überschieber Con ...

Thread rolling machine ORT RP18 B 2-roll, overhauled, See video The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy, Power (Ton): 18, Number of rollers: 2

Spoellijn 1000 mm: 1. Coillift 10 ton 2. Afrolmachine 10 ton 3. Dimeco stijltang 4. Dimeco Microfeeder 5. SCMB 650 TON Hydro ponspers VERKOCHT (niet meer leverbaar) 6. Heilbronn-feeder, na persen 7. Rollenbanen 8. Profileerlijn 1000 mm GEGOLFD PROFIEL NIEUW TYPE CHIEF PHENIX

Roll width up to 320 mm and 620 mm., Unwind station for rolls up to ø750 mm., Shear cut knife system on knife shafts consisting of upper and lower knife., Variable speed drive up to 100 m/min., Rewind station for rolls up to ø500 mm., For light abrasive materials like micro-finishing films, tapes and other special qualities., Unwind station:, Unwind station for rolls up to ø750 mm., Unwinding with pneumatically expandable unwind shaft for cores with ø75 mm., Pneumatically adjustable unwind brake., Cutting system:, Shear cut knife system on knife shafts consisting of upper and lower knife for fast change of cutting width., Rewind station:, Rewind station for rolls up to ø500 mm., Rewinding with two pneumatically expandable rewind shafts for cores with ø75 mm and slots., Note: All information according to manufacturers description; no guarantee

Lisse 1250 x 8 mm Corrugated

SPECIFICATIONS: Roller conveyor dimensions: 01: 4600 x 1500 mm 01: 3900 x 1250 mm 01: 4600 x 1300 mm 02: 4900 x 1250 mm 01: 5100 x 1600 mm 04: 4900 x 900 mm 03: 5140 x 900 mm 01: 5140 x 1200 mm 02: 5800 x 900 mm

SPECIFICATIONS Roller tables: 01: 6100 x 1350 mm 01: 6000 x 1250 mm 01: 3150 x 1300 mm

Used roll line KEMPER, type: Quadro Round -in bakery condition- For square, round and long-rolled rolls. - KEMPER Relaxer - WP KEMPER Quadro Round with 5 rows - With SIEMENS Simatic Touch control - Relaxation band - Long scooters and wrapping - Deduction AB 800-1000 - Sprinkling device - Including many different cutting rollers and warp knitting drums Weight range round: 40 - 150 g Weight range square: 40 - 150 g round rolls: max. 7,000 pcs./h Square rolls: max. 10,000 pieces/h Visits and test runs are possible by arrangement.

Bread Roll Press Fortuna Automatic A 3 H+ Dough dividing and rounding machine TOP model with effective shutdown Head cleaning to the back Dividing head with stainless steel knife NEW Dough insert up to 2400g Connection 400V, 16A-CEE connector Used machine overhauled with warranty Quality from a specialist company! Benefit from over 35 years of experience! Option: Platform or chassis Wirkteller Neu Service Package Maintenance contract E-Box Instruction & Commissioning

2x BT lifter for paper rolls.

Complete Stainless Steel Cold Rolling Facility from Hyundai Steel STS Incheon  Capacity: 239.000 TPY Width: 600 – 1320 mm Stainless 304 and 430 Consists of: (2) 'Production Machinery Co.' Annealing and Pickling Lines (Lot 1) (2) 'SMS' 20-Hi ZM Cold Strip Mill (Lot 3, Lot 4) 'SMS' 2-Hi Skin Pass Mill (Lot 5) 'Production Machinery Co.'& Coil Preparation Line (Lot 6) 'Production Machinery Co.' Grinding and Polishing Line (Lot 7) 'Honda' Cut-to-Length Slitting and Shearing Line (Lot 9) 'Honda' Slitting/Recoiling Line (Lot 10) These production lines come from reputable Original Equipment Manufacturers, including two 20-Hi Sendzimir Mills originally from DEMAG-SACK, now under SMS. With a proven track record of performance and meticulous maintenance, these assets represent a remarkable investment opportunity.

Knapp transfer roller conveyor Toothed belt slider 90° 750-485-425 RA1887 Make: Knapp Running direction: both directions Roller width (RB): 425 mm Nominal/outer width (NB): 485 mm Length: 750 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V 0,25 kW Motor Roller conveyors: Interroll EC300 24V Height frame: 170 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Pneumatic end stop and pneumatic lifting of the transfer belt Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: condition: very good (used) angle: 90° nominal voltage: 24V, 380-500V Conveying length in mm: 750 Nominal / outside width in mm: 485 Roll width in mm: 425 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive , Interroll EC 300 KW:  ...

Used head machine / dough divider KÖNIG, Type: Rex Industrie II - I-Rex 8 / 6 / 5 rows - Own integrated control system for individual operation - Weight range: up to 110 g Visits and test runs are possible by arrangement.

Dematic roller conveyor transfer device, pusher, 90° 700-1000-690 RA2433 Make: Dematic TZM 90 Running direction: both directions Roller width (RB): 690 mm Nominal/outer width frame (NB): 760 mm Total width: 1000 mm Length: 700 mm Roller diameter: 50 mm Roller distance: 75 mm Frame height: 250 mm Transfer motor: SEW 3x 400V, 0.37 kW Optionally available: Side guide oneand both sides Supports Motor for driving the rollers Additional elements for expansion Net prices plus VAT from the central warehouse of Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: very good (used) angle: 90° nominal voltage: 400 Conveying length in mm: 700 Nominal / outside width in mm: 760 Roll width in mm: 690 Roll division in mm: 75 Driven: YES Engine type: SEW Getriebemotor scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. S ...

VAN DEN BERGH FOIL-WIZARD (Hot foil stamping) INCL. ROLL UNWINDER HUNKELER S. No.: 02048020376 Equipment / Additional information: Incl. ROLL UNWINDER HUNKELER RW4-HS 7121 (M. No.: 1509697 // Age: 2004) With transfer station LCM 7084 (M. No.: 659595/2 // Age: 2001)

Web width: 520mm Voltage: 400V+IV+PE Current: 20A Control voltage: 24 V DC Air pressure: 6 bar

Compact bread roll line KÖNIG, type: GS 2000 For Kaiser rolls, long rolls, hot dog buns, normal round buns and flattened ones for hamburger buns. - Mini Rex 4000-S head machine - Weight range: 30 - 135 g - Knitting drums: SK58 and AK70 - Weight range: approx. 30 - 135 g - Capacity head machine: max. 4,000 pcs./h - Proofer capacity: max. 2,500 pcs./h - Condition: Good, well-maintained and technically tested by us - Ready for immediate use Visits and test runs are possible by arrangement.

Used head machine GULLIVER, type: IRIS 20 Special R -In very good condition / new parts- Dough-friendly, automatically operating dough dividing machine for the production of rustic rolls and breads in various shapes and Sizes. Square, triangular, diamonds, trapezoids and also ciabatta. - extra long inlay belt, for more dough - 2 new Mehler - Incl. 4 cutting rollers - Portioning and shaping of the dough by, easily and quickly replaceable, knife rollers - Best choice for processing doughs with high dough yield - This means that there is sufficient dough volume after freezing or interrupting proofing - Very space-saving due to foldable straps - Frame in stainless steel - Stepless adjustment of the speed - Display can be swivelled incl. several programs - Machine cleaned - Very good technical condition - Ready for immediate use Technical data: -El. Connection: 380 V, 5 ...

Used bread roll line with proofer EBERHARDT, type: Primo-Star / Vario-Star -In bakery condition- For Kaiserbrötchen, Kärtner Brötchen and Sternbrötchen - Primo-Star head machine - Proofer Vario-Star - Workflow from left to right - Weight range: 20 - 85g - Incl. spare engine - Double fermentation carriers - with flour Visits and test runs are possible by arrangement.

Technical data: Printing Section 5 × UV Flexo Printing Units 5 × UV Dryers Web Inspection BST PowerScope 300 – Web Inspection System Unwinder Max roll diameter: 1250 mm Heavy-duty construction with pneumatic shaft and web tension control Integrated splice table and web guiding system Rewinder Max roll diameter: 1250 mm (≈ 40 inch) Cold Foil / Lamination Module Enables in-line application of cold foil or over-lamination for premium label finishes (metallic, protective film, etc.) Turnbar (Web Inversion Unit) Allows reverse-side printing or lamination — flexible for multi-layer label applications Remailing Section 24" Supports reprocessing or secondary processing of pre-printed materials Additional Modules Ben Bunch 500 Die-cutting unit EM 510 (for use with magnetic cylinder, adjustable for gap) Cross Cutting Cylinder (inline sheeting or perforation — precise  ...

Dough dividing machine KÖNIG, type: Artisan SFC Compact machine for the production of square pastries with a high product variety thanks to interchangeable cutting rollers and punching tools. - Incl. 3 cutting rollers for longitudinal cutting - Incl. 2 cutting tools for the cross-section - Doughs up to a TA of 180 possible - Extremely gentle dough processing - Belt speed adjustment - Machine in stainless steel - Condition: Very good, ready to use - Everything technically checked and machine cleaned Capacity: up to 300 kg/h, at TA 180 Dough belt width: up to 170 mm Speed: max. 1.5m/min. EL. Connection: 3x 380-415 V, 50 Hz, 0.6 kW, 4.0 A Other punching tools are optionally available from KÖNIG: -Square -Heart - Crisp fresh -Quitting time -Rhombus The machine is in very good condition and is ready for immediate use. Visits and test runs are possible by arrang ...

Bread Roll Press Fortuna Automatic A 3 H+ Dough dividing and rounding machine TOP model with effective shutdown Head cleaning to the back Dividing head with stainless steel knife NEW Dough insert up to 2400g Dough divider with 3 new knitting plates Connection 400V, 16A-CEE plug Used machine overhauled with warranty Quality from a specialist company! Benefit from over 35 years of experience! Option: Platform or chassis Wirkteller Neu Service Package Maintenance contract E-Box Instruction & Commissioning

König Brötchenanlage composed of: Dough dividing and rounding machine type REX Classic T6S Pre-proofer type ECO TWIN 800 with cutting station with Stüpfler (Kaiser) with lateral pretzel discharge Deduction - Bakery condition not cleaned - partially. in need of overhaul

working length: 2050 mm : 2.0 mm max. wire thickness: 3.0 mm Underfloor: 110 mm motor strength: 165 mm motor strength: 22 kW bending speed: 5.2 mm/min length: 3150 mm height: 1150 mm width: 850 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ORT RP30 MS 2-roll 30 tons, thread rolling, knurling, small gears, 2009 = YOM, Electronic overhaul and electronic retrofit with Siemens PLC (2025) The machine is visible working in our warehouse in Gussago BS. Possibility of proof M i m u Machine Tools, Power (Ton): 30, Number of rollers: 2, PLC: Yes

A Bürkle roller coater including Bürkle LZU 800 outfeed table is available. Working width: 700mm, max. mechanical feed speed: 120m/min, nominal feed speed: 25m/min, max. workpiece height: 80mm, working height range: 880mm-920mm, outfeed table length: 4000mm, operating hours: approx. 1233h. Accessories: two original Bürkle spare rollers (sealed). Documentation available. On-site inspection possible.

The roll slitter type RKS is well suited for slitting narrow rolls of micro-finishing films, tape qualities as well as light abrasive materials with a roll width up to 620 mm., SWISS QUALITY MANUFACTURING, Roll width up to 320 mm and 620 mm., Unwind station for rolls up to ø750 mm., Shear cut knife system on knife shafts consisting of upper and lower knife., Variable speed drive up to 100 m/min., Rewind station for rolls up to ø500 mm., For light abrasive materials like micro-finishing films, tapes and other special qualities., Unwind station:, Unwind station for rolls up to ø750 mm., Unwinding with pneumatically expandable unwind shaft for cores with ø75 mm., Pneumatically adjustable unwind brake., Cutting system:, Shear cut knife system on knife shafts consisting of upper and lower knife for fast change of cutting width., Rewind station:, Rewind station for rolls up to ø500 mm., R ...

Rötchenanlage: Kövy KM-S Year of Make: 2012 Head Machine Fortuna: Primus Pro V11.0 Year of Make: 2021 Kövy Dimensions: approx. 4900 × 1080 × 2530 mm Capacity: approx. 5,280 dough pieces /h Proofer capacity: 860 dough pieces Fortuna Hourly output: max.ca. 5,000 dough pieces /h Weight range: 40 -100 gr. Weight: approx. 1,100 kg Length of band top: 1,200 mm Length with strap: 1,705 mm Width: 1,000 mm Height: 1,520 mm Year of construction Fortuna: 2021 Year of construction Kövy: 2012

Dough dividing and rounding machine ERIKA RECORD, type: Automatic machine No.3 -Refurbished- - For precise dividing and rounding of a wide variety of dough types - Fully automated workflow - Machine parts in oil bath (no lubrication necessary) - Machine head can be tilted, for better cleaning - Dough-friendly operation - Easy to use - Stainless steel side plates - Number of divisions: 30 pieces - Body size: No. 3 - Dough weight: 30 - 100 g - Capacity: approx. 10,000 dough pieces/h The machine has been completely overhauled and is in excellent condition.

TGW Roller Conveyor 2400-475-420 RA2436 Make: TGW Year of manufacture: 2000 Roller width (RB): 420 mm Nominal/outer width (NB): 475 mm Module length: 2400 mm Diameter rollers: 50 mm Distance between rollers: 75 mm frame height: 115 mm 40 modules available. Optional: Drive station with deflection supports Side guide adapted conveyor speed range with frequency converter Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2000 condition: gut Conveying length in mm: 2400 Nominal / outside width in mm: 475 Roll width in mm: 420 Roll division in mm: 60 Driven: NEIN, Motorstation nicht enthalten scope of delivery: Ohne Motorstation, without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward  ...

TGW alignment conveyor inclined roller conveyor 1750-475-420 RA2406 Make: TGW Year of manufacture: 2012 Roller width (RB): 420 mm Nominal/outer width (NB): 475 mm Length: 1750 mm Diameter rollers: 50 mm Distance between rollers: 60 mm Roller conveyor motor: SEW drive motor frame height: 130 mm Conveyor speed: contact us Angle rollers: ca. 5° Optional: supports Side guide adapted conveyor speed range with frequency converter Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2012 condition: gut nominal voltage: 380-500V angle: ca.5° Conveying length in mm: 1750 Nominal / outside width in mm: 475 Roll width in mm: 420 Roll division in mm: 60 Driven: YES Engine type: SEW Eurodrive Conveyor speed m / s: bitte Kontaktieren scope of delivery: ohne Frequenzumrichter, without supports and side guides For individual, expert advice, simpl ...

Printing Width: 330 mm Maximum Unwind Diameter: 1000 mm Maximum Rewind Diameter: 1000 mm All Station UV (GEW) Chiller Rolls Delam-Relam Cold foil Lamination Corona Treatment Web camera - BST Doble rotary die cutting station, 1 Gap Master Sheet cutting possible

Printing Width: 330 mm Maximum Unwind Diameter: 1000 mm Maximum Rewind Diameter: 1000 mm All Station UV (GEW) Chiller Rolls Delam-Relam Cold foil Lamination Corona Treatment Web camera - BST Doble rotary die cutting station, 1 Gap Master Sheet cutting possible

Roll Width: 1.000 mm - Roll Dia. 630 / 800 / 630 mm - With electrical motors

workpiece length: 3000 mm roll diameter: 50 mm work piece width: 300 mm Roll lenght: 210 mm Height: 800 bis 1100 mm No. - Rolls: 12 dimensions of the machine ca.: 3 x 0,33 x 0,55 m Lightly used discharge roller conveyor with fold-up stop and measuring scale. Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roll Press Fortuna Semi-Automatic Size 4 Semi-automatic 30-piece machine for perfect dough pieces Robust design for long service life Parting head NEWLY revised Dough filler up to 3300g, Low space requirement Connection 400V, 16A-CEE plug Dimensions: 580 x 580 x 1350 mm, WxDxH Used machine overhauled Quality from a specialist company! Benefit from over 35 years of experience! Option: Stainless steel pedestal Wirkteller Neu Service Package Maintenance contract Instruction & Commissioning Delivery

Roll Press Fortuna Semi-Automatic Size 4 Semi-automatic 30-piece machine for perfect dough pieces Robust design for long service life Parting head NEWLY revised Dough filler up to 3300g, Low space requirement Connection 400V, 16A-CEE plug Dimensions: 580 x 580 x 1350 mm, WxDxH Used machine overhauled Quality from a specialist company! Benefit from over 35 years of experience! Option: Stainless steel pedestal Wirkteller Neu Service Package Maintenance contract Instruction & Commissioning Delivery

Used bread roll line LIPPELT, type: G3000-CSC -In very good bakery condition- For Kaiser and sliced rolls - Head machine SVP - 3 rows - Digital control - Pre-proofer Z-B049 - with side discharge - Stamp shapes, such as HEART stamps, are available separately from the manufacturer -El. Connection: 3x 400 V, 50 Hz, 10 A, 2.2 kW - Capacity: 2,500 - 3,000 pcs./h The system is in a very good and well-maintained used condition and is immediately ready for use. Inspection and test run are possible by arrangement.

Used bread roll line KÖNIG, type: G2000 with Mini Rex Futura -In bakery condition- Compact bread roll line - Mini Rex Futura-S head machine - Can also be rotated to look only round and take off directly - Proofing time approx. 6 minutes at maximum output - With side discharge belt single-row - With tools for emperors - Condition: good, everything checked - Machine is still being cleaned The roll line is in good condition and is ready for immediate use. Viewing and test run are possible at any time by arrangement.

Used Roll Press FORTUNA, Machine Size 4 -In Bakery Condition- - 30 hollows per plate - Weight range: 40 - 110g - Condition: very good, - Video on request A viewing is of course possible by arrangement.

conische buiging met geharde rollen met gemotoriseerde backroll Number of rolls: 3x Roll capacity cold: 1550 x 6 mm Roll dia upside: 140 mm Power needed: 2,2 kW Length: 2700 mm Depth: 750 mm Hight: 1000 mm Weight: 1420 kg

Boven- en onderrol worden aangedreven (planetaire tandwielkast) Conische buiging Automatische gelijktijdige balancering Onderste rol excentrische balk Number of rolls: 4 rolls - 2 roll driven Roll capacity cold: 3100 x 32 mm Roll dia upside: 410 mm Dia under roll - side rolls: 370 - 300 mm Power needed: 25 HP Weight: 19 ton

GENERAL INFORMATION: Manufacturer: ULVAC, Inc., Japan Model No.: EWA-165 Type: Vacuum Roll Coater (Vacuum Metallizer) Application: Metallization of plastic films (PET/OPP/PE etc.) by aluminum evaporation Useful web width: up to 1650 mm Film thickness range: 12 μm typical.   POWER SUPPLY: Control / Main Units Power supply:  3Φ, 60 Hz, AC 380 V Rated power consumption (cabinet 1):  290 kVA Rated power consumption (cabinet 2):  160 kVA   VACUUM SYSTEM: Main Pumps Oil Diffusion Pump (Ejector type): Model:  ULVAC PBL-20 Power:  18 kW Fluid charge: 90 L Voltage:  380 V Water cooling requirement:  25 L/min (

pallet roller conveyor 2100-1040-900 RA2439 Pallet roller conveyor segment, continuous design length: 2100 mm Roller width (RB): 900 mm, Steel rolls Nominal/outer width (NB): 1040 mm roller distance / pitch 200 mm Overall height frame: 170/380 mm for pallet weight up to 1000 kg The shown supports are included in delivery. Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 0,75 kW Construction year: 1998 condition: good (used) Conveying length in mm: 2100 Nominal / outside width in mm: 1040 Roll width in mm: 900 Roll division in mm: 200 Driven: YES scope of delivery: including supports without side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen u ...

pallet roller conveyor 580-1040-900 RA2440 Pallet roller conveyor segment, continuous design length: 580 mm Roller width (RB): 900 mm, Steel rolls Nominal/outer width (NB): 1040 mm roller distance / pitch 200 mm Overall height frame: 170/380 mm for pallet weight up to 1000 kg The shown supports are included in delivery. Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1998 Electric data: 0,75 kW condition: good (used) Conveying length in mm: 580 Nominal / outside width in mm: 1040 Roll width in mm: 900 Roll division in mm: 200 Driven: YES scope of delivery: including supports without side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns  ...