roll to sheet used for sale

Drive power 110 KW Engine speed 1500 rpm Year of manufacture 2002 Voltage 400 V weight 2.580 KG The compressor has been dismantled in operational condition and is complete.

WARTSILA 32 FUEL OIL PART NO: 473200, BERGEN BRM LUBE OIL: 022899 BERGEN BRM, WARTSILA, DEUTZ KHD/MWM, MAN B&W, JENBACHER, ABC, PIELSTICK , GUASCOR, MAK, CATERPILLAR, VOLVO, WICHMANN, PUMPS, SACM, SEPERATOR, COMPRESSSOR, FILTER, PUMPS, VACUUM SAVAGE SYSTEM, HEAT EXCHANGER & COOLER. Spares are available and all kinds of spare parts can be given. Please contact us for your questions. EVE International AS E-Posta : info@eveinternational.com.tr Phone : +90 0216 519 2707 Fax : +90 0216 519 2720

BERGEN ENGINE TYYE B, PISTON RING SET PART NO: 413412 DRW 662/58. BERGEN BRM, WARTSILA, DEUTZ KHD/MWM, MAN B&W, JENBACHER, ABC, PIELSTICK , GUASCOR, MAK, CATERPILLAR, VOLVO, WICHMANN, PUMPS, SACM, SEPERATOR, COMPRESSSOR, FILTER, PUMPS, VACUUM SAVAGE SYSTEM, HEAT EXCHANGER & COOLER. Spares are available and all kinds of spare parts can be given. Please contact us for your questions. EVE International AS E-Posta : info@eveinternational.com.tr Phone : +90 0216 519 2707 Fax : +90 0216 519 2720

BERGEN BRM GASKET KIT, CYLINDER HEAD MAINTENANCE KIT, O-RING KIT AVAILABLE IN OUR STOCK. BERGEN BRM, WARTSILA, DEUTZ KHD/MWM, MAN B&W, JENBACHER, ABC, PIELSTICK , GUASCOR, MAK, CATERPILLAR, VOLVO, WICHMANN, PUMPS, SACM, SEPERATOR, COMPRESSSOR, FILTER, PUMPS, VACUUM SAVAGE SYSTEM, HEAT EXCHANGER & COOLER. Spares are available and all kinds of spare parts can be given. Please contact us for your questions. EVE International AS E-Posta : info@eveinternational.com.tr Phone : +90 0216 519 2707 Fax : +90 0216 519 2720

BERGEN INJECTION PUMP KITS. BERGEN BRM, WARTSILA, DEUTZ KHD/MWM, MAN B&W, JENBACHER, ABC, PIELSTICK , GUASCOR, MAK, CATERPILLAR, VOLVO, WICHMANN, PUMPS, SACM, SEPERATOR, COMPRESSSOR, FILTER, PUMPS, VACUUM SAVAGE SYSTEM, HEAT EXCHANGER & COOLER. Spares are available and all kinds of spare parts can be given. Please contact us for your questions. EVE International AS E-Posta : info@eveinternational.com.tr Phone : +90 0216 519 2707 Fax : +90 0216 519 2720

BERGEN NOZZLE PART NO: 700873, DRAW 662/22-11, DETAILS: VUO-U9019C/E MAN B&W ATOMIZER PART NO: 07793470 AND 07793254 BERGEN BRM, WARTSILA, DEUTZ KHD/MWM, MAN B&W, JENBACHER, ABC, PIELSTICK , GUASCOR, MAK, CATERPILLAR, VOLVO, WICHMANN, PUMPS, SACM, SEPERATOR, COMPRESSSOR, FILTER, PUMPS, VACUUM SAVAGE SYSTEM, HEAT EXCHANGER & COOLER. Spares are available and all kinds of spare parts can be given. Please contact us for your questions. EVE International AS E-Posta : info@eveinternational.com.tr Phone : +90 0216 519 2707 Fax : +90 0216 519 2720

The power plant, based on a 5 MW gas turbine CENTRAX 501 KB7 is complete with all needed equipment, allowing a steam output of 20 tons per hour at 20 bar. From ZERO hours until the last working day all maintenance was performed by Centrax under full maintenance contract.

Swivel ring, swivel bearing ROLIX Type: 08 0260 00 zz00 A No. 0430 medium bearing diameter: 260 mm inner diameter: 190 mm outer diameter: 329 mm without teeth sealed with rubber New ! Dimensions: 330 x 330 x 50 mm

Manufacturer: Holzher Vorschub 3 Rollen, Type: ET 117, Feeding by rollers: 3 Rollen, Technical data:: 0,75 , Speeds: 4, Deflection of the pendulum axes mm: ca.25 mm,

Manufacturer: Elektronikkarte Heesemann Kuhnke Rollensteuerung, Type: für Heesemann Druckbalken signale, FREE TEXT: Rollensteuerung 42444100,

Manufacturer: Transport Rollengang, Working length mm: 2500, Working widht mm: 800, Durchmesser Rolle mm: ca 80, Anschlaglineal link und rechts (ohne verstellung): yes, : ohne Antrieb,

Manufacturer: Roma Rolltor Kunststofflammele, Year: ca2000, FREETEXT1: mit Antrieb , FREETEXT2: Kunststoflamelle, FREETEXT3: 2 Führungschienen<CRLF>3380 mm, FREETEXT4: Rolltorhöhe 3380 mm, FREETEXT5: Rolltorbreite 3340 mm, Year :ca2000

Thread cutting head with chaser jaws, thread cutting stock, Tapping machine, pipe thread cutter -Inch thread: 1- 2 inches -Weight: 6.5 kg

Air cooler, evaporator, cold store, refrigerated container, cold room -Number: 2x fans 0.58 kW 1200 watt -Weight: 16 kg

Thread cutting head with chaser jaws, pipe thread cutter, Thread cutting stock, cutting stock set, ratchet thread cutting stock -Inch thread: 4 dies R1/2 , R3/4, R1 , R1 1/4, ratchet -Transport case -Dimensions: 435/205/H90 mm -Weight: 8.6 kg

Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter -Rollers Central Central ratchet lever -with: cutting head R1 -Dimensions: 500/85/H80 mm -Weight: 2.6 kg

table diameter: 200 mm workpiece height: 100 mm number of wheels: 1 Control: Robot CNC total power requirement: 6 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 1,83 x 2,04 x 2,1 m Technical data - Grinding capacity : Ø 0.025 –12.7 [mm] - Bar diameter : Ø 1.0 –12.7 [mm] - Grinding length : W15 (option W20) - Z-axis : 35[mm] Resolution : 0.5 [µm] – X- axis : 25 [ mm] Resolution : 0.1µm – Y-axis : 286[mm] Resolution : 0.5µm – U- axis : 15 [mm] Resolution : 0.1µm Head Motor: 0.70 [kW] Rotation: 300 – 3000 [rpm] Grinding - Raw grinding : 1.5 [kW] Spindle : Ø 60 [mm] Grinding wheel diameter : Ø 200 [mm] Cutting speed : 30 m/sec. - Completion: 0.75 [kW] Spindle: Ø100 [mm] Grinding wheel diameter: Ø150 [mm] Cutting speed: adjustable - Dimensions (L x W x H): 1830 x 2040 x 2100 mm - Weight: approx. 1800 [kg] Accessories - Loading and unloading robots - F ...

Key data: 3155

Make and Model: Rolls Royce KVSG 18 G4 The engine is from 1994. It had a full rebuild in 2004. Fuel: Natural Gas Capacity: 3155kW Hours: 63,000 HZ: 50 V: 10500 Scope of Supply: Engine, Alternator, Base frame, Acoustic Container, Exhaust Gas Heat Exchanger, Control panel and synchronisation panels . Please note: circuit breaker and transformers are not included. Price: €200,000

Combined Cycle Gas Turbine Power Plant 75 MW/50 Hz – Zero Hours This equipment was delivered in 2017 by an EPC contractor who selected Rolls-Royce and Siemens as main equipment suppliers. This was a greenfield project and therefore delivery contained all equipment needed for 75 MW power plant operation, like fuel gas treatment plant, water treatment plant and complete switchyard with step-up transformers Manufacturing year: 2017 Gas turbine: Rolls-Royce Trent 60, Dry Low Nox Steam turbine: Siemens SST-300 Step up tranfomers: 2 pc Alstrom 11kV to 154 kW Complete switchyard: Siemens 154 kV Nominal output 100%: 60 MW + 15 MW Max efficiency: Single cycle 42 %, combi cycle 54% Heat recovery steam boiler: 30 bar / 300 C Water treatment: Sand and active coal filters + RO Documentation: Complete original in English Delivery: Complete plant equipment from water and gas t ...

Bergen Rolls Royce B35:40V20AG complete gas power plant Year of Make 2011 running hours: 16.380 Hours 8415 Kw 11kV 50 Hz at 750 RPM with AVK DIG 167 f/8 alternator 9100 kvA Complete power plant with all auxilaries: Control Air Compressor ,Self Demand Transformer, LT cooling water system, cooling tower, HT cooling water system, cooling tower, cooling fans, Start Air Compressors and Air tank, Natural Gas Regulator Unit, Emergency Diesel Generator 220 kVA, piping systems oil filter and heater exchangers, Neutral Earthing Resistor Unit, Generator Cooling Fans, Steam Boiler: Nooter/Eriksen Capacity: 5.5 T/h, Switchgear Units, engine tools, instruction manual and more... Please contact for more info and complete scope / offer

This Rollomatic NP4 Grinding machine was manufactured in the year 2006 in Switzerland.

sheet width: 1050 mm plate thickness: 3,3 mm pre-bending: 3 volt: 400 V frequency: 50 Hz 0: 90 mm min. dia.: 130 mm total power requirement: 1,1 kW weight of the machine ca.: 490 kg dimensions of the machine ca.: 1650x1200x700 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mm plate thickness: 4.5 mm pre-bending: 4.0 volt: 400 V frequency range: 50 Hz min. dia.: 210 mm 0: 140 mm total power requirement: 2.2 kW weight of the machine ca.: 1565 kg dimensions of the machine ca.: 3240x1200x900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rolling mills for cold rolling of sheets 2 types of LSTC profiles (C and U) + PIR profile panel. Documents with characteristics can be obtained as a file. to or email.

sheet width: 1256 mm plate thickness: 3 mm pre-bending: 2,5 frequency: 50 Hz volt: 400 V 0: 90 mm min. dia.: 130 mm total power requirement: 1.1 kW weight of the machine ca.: 545 kg dimensions of the machine ca.: 1.1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Etiquetadora Rollmatic 8500/h Self-adhesive rotary labeling machine PE LABELLERS Description Rotary roller feed labeling machine suitable for the application of wrapping labels from the reel. SHEET - Type: rotary labeling machine. - Application: label fed by plastic roll with hot melt glue. - Possible hot-melt combination + cold glue and / or self-adhesive on the same labeller. - Suitable for handling cylindrical and shaped containers (rectangular, square, oval, etc.), even empty. - Production 8,500 bottles / hour. Labeling Measures Width 3400 mm Height 2300 mm Length 3000 mm Measures Heat tunnel Width 1300 mm Height 2300 mm Length 5000 mm Features Model: ROLLMATIC Year: 2005 Width: 3400 mm Height: 3400 mm Large: 3000 mm

YEAR 2010 1. TAI-1300C - LIFTING UNWINDER Product Width: 100-1250mm Diameter of roll max 1000mm Edge Position Control System (E.P.C) Auto Tension Control System 2. TA-1300DTC-2 - DRAW-TAPE FEEDING SYSTEM Tape Thickness: 0.015-0.02mm (HDPE) Draw-Tape Width: 80-100mm Max. O. D. of Draw-Tape: 650mm 3. TA-S-1250 - SHUTTLE TRACK SEALING & PERFORATING UNIT Max. Bag Length: 1200mm (Max. Sealing Width) Bag Width: 140-2000mm Film Thickness: 0.01-0.08mm (LLDPE, Single Layer) 0.008-0.025mm (HDPE, Single Layer) Speed 100 m/min 4. TAF-1700 - TRIANGLE FOLDING UNIT 5. TAD-450 - FOUR SHAFT SPINDLING WINDER Coreless Production Width: 100-380 mm One of the Machines is upgraded to new model Servo driven punching device and hot air sealing system for draw tape sealing unit.

Roller conveyor length: 2900 mm Wheel width: 700 mm table height: 700 mm Roller conveyor width: 900 mm roll diameter: 140 mm : kg fence: 450 mm 0: kW range L-W-H: 3,0x0,9x1,3 m weight: 0,7 t Length: 3000mm, width: 600mm, height approx. 750 mm, 3500x1200x8500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roller conveyor length: 3600 mm Wheel width: 700 mm table height: 700 mm Roller conveyor width: 900 mm roll diameter: 140 mm : kg fence: 450 mm 0: kW range L-W-H: 3,7x0,9x1,3 m weight: 0,7 t Length: 3000mm, width: 600mm, height approx. 750 mm, 3500x1200x8500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine manufacturer: ROLL O MATIC Machine model: DELTA 1100 Year of manufacturing: 2016 Materials: HDPE – LDPE - BIO Condition: in production Working hours: 812 Hours Complete line: YES Machine dimension: (length 17.5m /width 3.5m /height (2.5m to 3.3m) Welding width: 900 (3 X 300) Plastic type bag: T-shirt bag / bottom seal bag Final positioning of the bags: roll Bag length: Max: 3000mm; Min: 250mm Bag width: Max: 3X250mm; Min: - mm Film thickness: Max:60 microns; Min: 8 microns Bottom gusseting: No Side gusseting: Yes Depth: 150mm Output: Cycles/minute: 300 Production: Meters/min: 160 Unwinder: Type:Width + motorized shaft Mother roll width: 1700 Mm Unwind shaft: Number: X 1 ; Type: Pneumatic Mother roll diameter: 800 mm Web guide: Yes Sealer/Longitudinal: Yes Number lanes: 3 Photoelectric cell control: YES Sealing bar: Bottom Drive: Servo Control p ...

Transport trolley, platform trolley, transport trolley, heavy duty trolley, table trolley, assembly trolley, chassis with 2 angle frames -Manufacturer: Rollcart, table trolley type 08-7424 -Load capacity: 300 kg -Chassis: 2 swivel castors with brakes, 2 fixed castors -Dimension: 1160/600/H825 mm -Weight: 26 kg

Walter Roller GmbH & Co. evaporator, type: HVS 403, serial number: 11 251 23 0106, 230 V, 1 Ph, 50/60 Hz, 70/90 W, volume: 2.8 l, refrigerant: G2, 1 fan, dimensions: 620 mm x 420 mm x 440 mm.

Manufacturer: Gerteis Model: GMP-Polygran Macro Pactor 250/100/3 Year: 2004 Type: roller compactor, granulation unit for the pharmaceutical industry. Feeding screw Tamping screw Compaction zone with pressure rollers Granulation area with star rotor and screen Force: 1 - 20 KN/cm Gap width: 1.0 - 6.0 mm Pressure roller speed: 1 - 30 rpm Roller diameter: 250 mm Roller width: 100 mm Capacity: 60 - 400 Kg/H (normal value: 200 Kg/h) Equipment dismantled and stored. Full electrical and technical file + program backup available. Electrical and safety control cabinet not available . These elements can be quoted separately.

CONTROLS   PLC SIEMENS S7 300 SURFACE TREATMENT, USABLE PROCESS SPACE / ZONE   length: 7000 mm   width: 1040 mm ELECTRICAL SPECIFICATIONS   total power consumption: 145 kW   mains power supply: 267 kVA   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 7400 mm   space requirements -front/back-: 2350 mm   total height: 2300 mm   total weight approx.: 8000 kg Continuous conveyor belt 1040 mm wide, separated into 3 lines Process:Stage 1:       Cleaning (65 degrees)Stage 2,3,4:   Rinsing (65, 60, 60 degrees)Stage 5:       Heating air drying (60 degrees)Oil separator: continuous oil discharge Heating:       electrical heating Convey ...

CONTROLS   PLC SIEMENS S7 300 SURFACE TREATMENT, USABLE PROCESS SPACE / ZONE   length: 9000 mm   width: 350 mm ELECTRICAL SPECIFICATIONS   total power consumption: 278 kW   mains power supply: 450 kVA   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 10300 mm   space requirements -front/back-: 2500 mm   total height: 2650 mm   total weight approx.: 9000 kg 3-lane system with 350 mm usable width each Process sequence: Stage 1:         Cleaning (70 degrees) Stage 2,3,4,5:   Rinsing (65, 60, 60, 55 degrees) Stage 6:         Hot air drying (65 degrees) Oil separator:   continuous oil discharge Heating:      ...

Labeling sheets, 5x 10 sheets SIEMENS S7-SmartLabel 2x 6ES7 392-2AX00-0AA0 ( 6ES7392-2AX00-0AA0 ) Color: petrol, for 16-channel modules 1x 6ES7 392-2AX10-0AA0 ( 6ES7392-2AX10-0AA0 ) Color: petrol, for 32-channel modules 1x 6ES7 392-2CX00-0AA0 ( 6ES7392-2AX00-0AA0 ) Color: yellow, for 16-channel modules 1x 6ES7 392-2CX10-0AA0 ( 6ES7392-2AX10-0AA0 ) color: yellow, for 32-channel modules New ! Dimensions ( packaging ): 300 x 220 x 30 mm

Aluminum tear plate, aluminum checker plate, checker plate, checker plate -Material: aluminum -Dimensions: 1500 x 2160 mm -Sheet thickness: 2.5 mm -Tear thickness: 4.0 mm -Number: 30 pieces of checkered plate available -Price: per piece -Weight: 24 kg/piece

3-roll bending machine SCHÄFER type SRMVS Masch. Nr. Year of manufacture: 1973 , sheet length: 2000 mm, sheet thickness: 16 mm, top roll, diameter 250 mm, bottom roll, diameter 230 mm , roll speed 7 rpm. Rolling speed approx. 5 meters min. Mains connection 380 volts, 50 Hz. - all 3 rollers driven - symmetrical roller arrangement - motorized upper roller adjustment- conical bending via inclined adjustment of the upper roller with coupling for one-sided adjustment - lateral start-up for conical bending - motorized lower roller adjustment , individually for the front and rear roller- right and left rotation via control button in the control panel - swing-out hinged bearing and spindle support to relieve the upper roller Dimensions L x W x H 4200 x 1900 x 2200 mm Weight 10.6 ton. good condition; used

specifications: Max sheet width 3,000 mm Max sheet thickness at max yield strength 240 N/mm2 when bending to max. sheet width 35 mm when rounding Bend length 2.2 x S Max passage between rollers 145 mm Roller diameter upper roller 552 mm Underroller 532.4 mm Side rollers 400 mm Number of rollers 4 Powered rollers 2 top and bottom roller Drive of the rollers hydraulically Arrangement of the rollers symmetrically Rotation speed of the rollers 2-4 m/min Adjustable rollers 3 Type of adjustment of the rollers hydraulically Adjustment speed lower roller 0-200 mm/min. Side rollers 0-700 mm/min. Brake of the rollers pneumatic Actuation of the folding bearing hydraulically Operating voltage 3 x 380 V / 50 Hz Display device of the roll positions 4 x optical/analog Weight of the machine approx. 42 to Area 2.71 x 6.4 m Height 3.12 m

Technical data: -Working width 1030 mm -Material thickness 1.25 mm -Roll diameter 55 mm -Upper roller swing -Rear and front wave about eccentric adjustable -Rear and front wave each with a Groove to round -for sheet metal with wire inlay -Space requirement approx. B H 1350 x 1050 x D 750 mm -Weight approx. 150 kg

VERRINA CLR 216 X 4050 Sheet metal round bending machine Double roller with 4 rollers and double pressure Year of manufacture 1979 Capacity 4000 mm x 16 mm Roll length 4050 Roll diameter side rolls 370mm top & bottom roll 410mm Roll rise and fall 370mm Input 400/3/50 Hz 52 kW Rolling speed 2.9 / 3.9 / 6.8 meters per minute Control control panel Equipped with hydraulic drop, safety cable hoist Length 9000mm Width 2350 mm Height 2400 mm Net weight approx. approx. 29,500 kg

sheet width: 3000 mm plate thickness: 40 mm pre-bending: 30 total power requirement: kW weight of the machine ca.: 45 t dimensions of the machine ca.: 8,4 x 2,6 x 3,7 m Machine in good condition. PREBENDING DOUBLE . Maximum bending length 3.000 mm . Bending capacity 40 mm . Prebending capacity 30 mm . Top roll diameter 590 mm . Bending rolls diameter 490 mm . Main motor 45 kW . Bending motor 30 kW . Digital readout in all axis . Approximate weight 45 t . Approximate dimenssion.: . Length: 8.400 mm . Width: 2.600 mm . Height: 3.700 mm . Trench height: 1.780 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mm plate thickness: 1 mm roll diameter: 56 mm dimensions of the machine ca.: 1600 x 700 x 1050 mm Domestic equipments: - Upper roller can be swung out manually The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2100 mm plate thickness: 13 mm pre-bending: 10 mm upper roll diameter: 230 mm lower roll diameter: 210 mm side roll diameter: 190 mm total power requirement: 7,5 kW weight of the machine ca.: 4.620 kg dimensions of the machine ca.: 4150x1400x1300 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

sheet width: 2050 mm plate thickness: 4,5 mm pre-bending: 4,0 mm min. dia.: 210 mm roll diameter: 140 mm weight of the machine ca.: 1530 kg dimensions of the machine ca.: 3220x1200x900 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mm plate thickness: 3,3 mm pre-bending: 3,0 mm roll diameter: 90 mm min. dia.: 130 mm total power requirement: 1,1 kw weight of the machine ca.: 570 kg dimensions of the machine ca.: 2100 x 800 x 1130 mm Domestic equipments: - Asymmetrical 3-roll round bending machine with motor drive - Upper roller swung out - Conical bending device - Main engine with brake device Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1250 mm plate thickness: 5,5 mm pre-bending: 5,0 mm roll length: 1280 mm min. dia.: 210 mm roll diam. toproll: 140 mm weight: 1365 kg range L-W-H: 2.020 x 900 x 1.200 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3000 mm plate thickness: 40 mm pre-bending: 35 mn number of rolls: 4 Walzen diameter of upper rolls: 550 mm roll diam. bottom roll: 480 mm speed: 1 - 4 m/min total power requirement: 66,0 kW weight of the machine ca.: 47,3 t dimensions of the machine ca.: 6,8 x 2,95 x 3,05 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2000 mm plate thickness: 10 mm pre-bending: 8 mn number of rolls: 4 Walzen diameter of upper rolls: 210 mm roll diam. bottom roll: 190 mm speed: 5 m/min total power requirement: 9,0 kW weight of the machine ca.: 5,45 t dimensions of the machine ca.: 4,05 x 1,47 x 1,55 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1270 mm plate thickness: 4 mm pre-bending: 3,5 mm diameter of upper rolls: 120 mm total power requirement: 2,2 KW weight of the machine ca.: 1,15 t dimensions of the machine ca.: 2500 x 800 x 1100 mm Basic equipment: - Conical bending device - Swiveling top roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Electrically adjustable rear roller Digital display for rear roller Hardened rollers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.