roll o matic used for sale

Technical data: Diameter over bed: 1550 mm Diameter over slide: 1600 mm Turning length: 5500 mm Max cross travel: 400 mm

Technical data: maximum sheet width: 3000 mm maximum plate thickness at maximum yield of 240 N / mm² on bending: 35 mm On bending length: 2,2 x S Diameter of roller upper roller: 552 mm Bottom roll: 532,4 mm Side rolls: 400 mm

Technical data: Roll width: 800mm Roll diameter: 152mm Length: 9700mm Roll spacing: 800mm Power: 2.2 KW Accessories: Abort ingenurole (right) Lifting and sinks counter-rotating thread roller  for max. wood length 7.0m, threaded roller is located 2.5 m before the roller aisle end

Working width: 1050 mm sheet thickness: 1.5 mm top rollers Ø: 70 mm bottom rollers Ø: 70 mm weight: 320 kg space requirement: 700 x 1300 x 1100 mm

Used triple roller made by Metalchem Poland. Dimensions: lenght 1200 mm, width 550 mm, height 1400 mm. Roll dimensions: 300x100 mm No documentation. Machine after renovation.

Used roller mill made by SPOMAX Polska, typ RUD-11/8. New 2002. Depending on the crushed raw material yield is 100-2000 kg (mean 1000 kg). The mill has two pairs of milling rollers. 7.5 kW motor. Overall dimensions: height 2030 mm, 755x890 mm base. Weight 680 kg.

Platelet + roller conveyor approx. 47 000 mm; h max = 1400 mm + 16000 mm pneumatic conveyor; h max = 2500 mm, new 1997

for up to 4000mm wide carpet rolls, 4 per page per box 5 fields â approx. 4500mm, total length approx. 22000mm Price includes carpet poles and holders

1 x Rodolfo Comerio 2200mm wide x 700mm dia two roll mill, Year of manufacture: 1981, motorised nip adjustment, Rollers bearings, Direct drive gearbox (no bullgear) With 138Kw DC variable speed motor and controls Stip knives to back roll?. In very good condition.

Conical roller duct with 6 cone rollers, length x roll width = 6,000 x 800 mm tapered roller conveyor with 6 pcs. rolls; length x rolls width = 6,000 x 800 mm

Qty. 1 Second-hand cold rolling mill Mfc.: SUNDWIG/MINO Type: 4-HI Built: 1980 Revamped: 2016 Rolled material: Carbon steel SAE1006, S235-S550, C45-C75, IF Strip width max.: 600 mm Thickness: in 6.0 mm out 0.25 – 5.0 mm Speed max.: 500 m/min Coil size: ID 508 mm OD 2000 mm Back-up roll dia.: 590 mm - 625 mm Work roll dia.: 190 mm - 240 mm Motors stands: DC, EAA converters (installed 2004), Rolling force: 500 Tons Coolant Emulsion Filtration by magnetic system Controls PLC system: SIEMENS Scada: Simplicity Thickness control: Entry stand hydraulic equipped with Automatic Gap Control (AGC) Thickness control: Exit stand Utilities: Electrical voltage: 380 V, 3 Phase, 50 Hz Air pressure: 5 Bar Cooling water No. of work rolls: 120 used + 8 brand new No. of back-up rolls: 8 Electric Drawings Mechanical Drawings Certification: Allegato V/8 ...

<b>Features:</b> Used roller conveyor from overbeck Very stable design Feet to order separately Drive type: Gravity without motor Condition: fully functional with traces of usage Ideal for fast material transport Professionally dismantled and packaged approx.: 9 meters in stock, 3 meters per segment <b>Technical data:<b> </b> Dimensions of the roller conveyor</b> Total width approx.: 710 mm Total length per segment: 3,000mm <b>Details of the role</b> Clamping length approx.: 640 mm Roll diameter 40 mm Axis distance: approx. 100 mm (adjustable) Material: steel, galvanized <b>Information on the framework</b> Height: 140mm Width: 30mm <b>Roller conveyor</b> The roller conveyor is ideal in the picking zone for interlocking machines or workstations and optimising the interna ...

<b>Features:</b> Used roller conveyor Very stable design Feet to order separately Drive type: Gravity without motor Condition: fully functional with traces of usage Ideal for fast material transport Professionally dismantled and packaged <b>Technical data:<b> </b> Dimensions of the roller conveyor</b> Total width approx.: 990 mm Total length: 1,500mm <b>Details of the role</b> Roll diameter 50 mm Axis distance: approx. 100 mm Material: steel, galvanized Role manufacturer: Interroll <b>Information on the framework</b> Height: 50mm Width: 30mm <b>Roller conveyor</b> The roller conveyor is ideal in the picking zone for interlocking machines or workstations and optimising the internal process. During transport, the roller conveyor can convey sensitive and differently sized c ...

Material: mild steel Reel in stainless steel;

NEW TUEV acceptance behind them. Sell the machine because we don't need it at the time. If you have questions we are gladly available.

Qty. 1 Second-hand 3 stands 4-Hi Tandem cold rolling mill line Mfc.: Demag Type: 4-Hi Built: 1968 Material to be rolled: low carbon steel Strip width: 600 †1500 mm Thickness Entry: 2.5 mm Exit: 0.2 mm Entry: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Exit: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Work roll: dia. 380 mm x 1650 mm Roller bearings Back-up rolls: dia. 1150 mm x 1650 mm Oil film bearings Housing: Closed top, cast steel construction Housing post: 762 x 552 mm Rolling speed: 240 m/min.

REHEAT FURNACE Type: Walking Beam Incoming Billet: 160 x 160 mm x 8.300 – 12.000 mm Charge: Hot and Cold Discharging Temperature: 1150 Degr. Nominal Production 90 Ton/Hr Fuel: Natural Gas (LNG) Furnace inside dimensions: L x W 12.500 x 12.800 mm REBAR ROLLING MILL: Type: Housingless Stands Roughing Mill: 6 Stands Intermediate Mill: 6 Stands Finishing Mill: 6 Stands Horiz. Stands # 1,3,5,7,9,11,13,15,17 Vert. Stands # 2,4,6,8,10,12,14 Horiz./Vert Stands #16 and 18 CROP SHEAR No. 1 Head & Tail Cropping, Emergency Chopping Type: Crank Shear- Blade width 200 mm CROP SHEAR No. 2 Head & Tail Cropping, Emergency Chopping No. of Blades: 4- Blade width 180 mm DIVIDING SHEAR Cutting to multiple lengths COLD SHEAR Cutting to final length Shear type; CMC 0630 0950 No. of Blades: 2- Blade width 900 mm Product Length: 6-12 Meter (Standard)  ...

with tow roller, longitudinal and transverse ribbing for the production flour-free broken goods, with all Orginalteilen, with two roller motor for positive-drive of both rollers

Reed 42" x 16" Two Roll Mill. 40HP Motor, with clutch brake. Friction ratio 1.1 Manual Nips. On one-piece steel bedplate.

Roller aisle with 180 weaning, hydraulic weed drive, electric drive 0.5 kW, length 2,200 mm, roll width 550 mm, base on Foerderhoehe 900 mm Roller conveyor with 180 hydraulic driven turning device, motor 0.5 kW, length 2,200 mm, width 550 mm, transportation high 900 mm

Properties: + Semi-automatic + very good value for money + already as standard: mobile machine, optimal for quick ground wiping + Stainless steel partial knife + coated knife head + even division of the dough + excellent round inges, the dough pieces + ergonomic knife cleaning position (head swivelable 90 degrees forward) + easy and fast adjustment of the chamber height + side bracket for actuator, immediately at hand SERIES equipment: + 3 impact plates included SPECIAL accessories, available at an extra cost: - additional impact plates for DivObun Size 4-30: EUR 93,-- net / Pcs

New machine BÄKO SPECIAL OFFER with 3 year warranty BÄKO Item No. 821209 Benefits: + Fully automatic + unbeatable price-performance ratio + already as standard: mobile machine, optimal for quick ground wiping + Stainless steel partial knife + quickly replaceable, coated knife head + with one machine, up to 4 different knife heads can be used + extremely wide weight range (16 gr - 250 gr round worked possible!) + uniform division of the dough, excellent round ingesity of the dough pieces + Act shutdown at the push of a button + ergonomic knife cleaning position (head swivelable 90 degrees forward) + Act switch-off, pressing time and duration of action programmable + digital display, 10 programs can be saved + easy and fast adjustment of the chamber height + side bracket for actuator, immediately at hand SERIES accessories: + 3 impact plates included SPECIAL acc ...

Qty. 1 Second-hand foil rolling mill plant Mfc.: World Co. (Japan) Type: 6-Hi – Non reversing mill Built: 2002 Application: Copper foil Width: 400 – 700 mm Coil weight: Max. 5 Ton Thickness Entry: 100 – 200 microns Exit: 5 – 100 microns Speed: 0-400/800 m/min. Thickness X-Ray unit AGC system Variable Crown Control Hydraulic servo equipment Main motor power: 200 kW DC Slitter line Mfc.: IHI Width: 150-700 mm Thickness 5 – 50 microns Degreasing line Mfc.: World Co. Strip width: 700 mm Thickness: 10-50 µm Treatment line Mfc.: Kawasaki Built: 2005 Width: 700 mm Thickness: 10-50 µm

Roller conveyor for frame saw to cross off promotion L x W x H: 150 x 230 x 100 cm Weight approx. 6000 kg Built in 1978 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Horizontal wire saw for profiling of EPS boards Programming of CNC cutting image Application for EPS, XPS, PUR rigid foams Plate length: 1000 mm Board width: 500 mm Thickness: 80-200 mm Interpretation for approximately 17 m ³ production quantity per hour installed cutting image: hacking folding Visits by appointment at any time. Other machines and components for the production and processing of foams are available.

Working width: 1020 mm, sheet thickness: 1 mm top rollers diameter: 55 mm bottom rollers diameter: 55 mm space requirement: 1370 x 570 x 1100 mm

specifications: Max sheet width 3,000 mm Max sheet thickness at max yield strength 240 N/mm2 when bending to max. sheet width 35 mm when rounding Bend length 2.2 x S Max passage between rollers 145 mm Roller diameter upper roller 552 mm Underroller 532.4 mm Side rollers 400 mm Number of rollers 4 Powered rollers 2 top and bottom roller Drive of the rollers hydraulically Arrangement of the rollers symmetrically Rotation speed of the rollers 2-4 m/min Adjustable rollers 3 Type of adjustment of the rollers hydraulically Adjustment speed lower roller 0-200 mm/min. Side rollers 0-700 mm/min. Brake of the rollers pneumatic Actuation of the folding bearing hydraulically Operating voltage 3 x 380 V / 50 Hz Display device of the roll positions 4 x optical/analog Weight of the machine approx. 42 to Area 2.71 x 6.4 m Height 3.12 m

Qty. 1 Second-hand aluminium foil rolling mill plant Mfc.: Robertson, Kampf, Schmutz, Nishimura, Waldrich-Siegen, Otto-Junker Built: 1962 – 1989 Foil width: 850 mm Entry thickness: 0.4 mm Exit: 2 x 7 microns Scope of supply: Roughing Foil rolling mill: 4-Hi Intermediate foil mill 4-Hi Finishing foil mill 4-Hi Slitters – Qty. 4 Roll grinders – Qty. 2 Annealing furnaces – Qty. 4 Charging car INDIVIDUAL ITEMS CAN BE SOLD

Glue tank with rollers for sanding machine IMA

HIGH PRODUCTION BABCOCK ROLLERS DRYER

Working width: 4800 mm N. of heated sections: 22 N of decks: 6 complete with automatic loading and un loding systems

Condition needed Element Length Element Width Surface Drive Missing Parts Head conveyor 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no bearing, drive shaft 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no bearing, drive shaft, 2 x rollers Congestion conveyors 2500 1060 lacquered n.a. no 2500 1060 lacquered n.a. no 2500 1060 lacquered n.a. no 2500 1060 lacquered n.a. no 2500 1060 lacquered n.a. no 2060 1060 lacquered n.a. no 2000 1060 lacquered n.a. 1 x roller 2060 1060 lacquered n.a. no 2500 1060 lacquered n.a. no 2500 1060 lacquered n.a. no 2500 1060 lacquered n.a. no 2500 1060 lacquered n.a. no 2500 1060 lacquer ...

Spare blade for Längsschneiddysteme (slitting lines) 10 piece circular knives (upper blade) 100 x 70 x 1, 2 (or similar size) with 10 bit holder shaft. NEW. 10 piece counter knife (bottom) 78 x 55 x 10 (od similar dimensions). NEW. For slides or paper industries. Alternative dimensions on request.

Properties < b >: < / b > Used pallet roller conveyor Condition: Excellent condition with light wear Material: Steel (galvanized) Color: grey Expertly disassembled and packed 10 items in stock Specifications < b > < /b > Pallet roller conveyor dimensions approx. Total length of an element: 2000mm Total width: 890 mm Roll width: 760 mm Length: 130mm Rolling cross section: 60 mm 8weyjr3vn Material: Steel, galvanised Frame height: 90mm Pallet roller conveyor < b > < /b > Thanks to the superb craftsmanship of the pallet roller conveyor glides your material, even under high load, gently to the place of destination. Tailor-made solutions < b > for your intralogistics < /b > We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! ...

Technische Daten: -Länge 1650 mm -Breite 460 mm -9 Rollen, Durchmesser 58 mm -Rollenabstand 200 mm -max. Belastung 200 kg -Höhenverstellbar von 680 - 1150 mm -Abmessungen L=1650, B=460, H=120 mm -Gewicht 31 kg

Robust fine rolling mill with 800 mm roll width and 800 mm roll diameter, incl. main drives, auxiliary drives, control cabinet and hydraulic unit for splitting. In regularly maintained condition, rollers without riefen. Available for an extra charge: Matching dust filter from Hellmich.

Fine rolling mill with 800 mm roll width and 800 mm roll diameter, incl. main drives and auxiliary drives, split adjustment manually. In regularly maintained condition, rollers without riefen. Available for an extra charge: Matching dust filter from Hellmich.

Roller crusher with 800 mm roller width and 800 mm roller diameter, incl. roller drives, auxiliary drives, switch box and hydraulics power pack for gap adjustment. In regularly maintained condition, rollers without ridges. Available at extra charge: Suitable dust filter by Hellmich.

Roller crusher with 800 mm roller width and 800 mm roller diameter, incl. main roller drives and auxiliary drives, manual gap adjustment. In regularly maintained condition, rollers without ridges. Available at extra charge: Suitable dust filter by Hellmich.

Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop

We offer you here a used Roll bar for purchase. Included in delivery are: 01x roll strip, used Material color frame: galvanized Frame profile: W35xH28 mm Material color rolls: similar. Cream Total length: approx. 2,025 mm Total width: approx. 35 mm Roll width: approx. 17 mm Roll spacing: approx. 25 mm Roll diameter: approx. 25 mm Total height: 35 mm Material rolls: plastic General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried out according to the Requirements  ...

Two-roller gluing machine for the processing of cold glues. Same glue application by changing the distance between the two rollers to each other. width 350 mm. ; ready for use. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Power: 0 t Thread diameter maximum: 0 mm Thread diameter minimum: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. diameter threaded: 2 mm Max. diameter threaded: 48 mm Gewindelänge: 130 mm Min. pitch: 0.4 mm Max. pitch: 4 mm Min. roll die diameter: 100 mm Max. roll die diameter: 148 mm Roll bore diameter: 54 mm Roller pressure infinitely adjustable: 17 to Roll axis swivel for thru-feed: 8 ° Roll and pause time infinitely variable: 1 - 30 sec Shaft distance: min.: 120 mm max: 200 mm Feeds: stepless up to: 1.4 mm/s Roll speeds: stepless up to: 280 rpm Voltage 50 Hz 3x: 380 Volt Motor power: 5.5 kW Machine´s weight about: 2141 kg Weight total installation approx.: 2401 kg Overall dimensions machine: Length: 1250 mm Width: 1200 mm Height: 1260 mm Space requirement of the electrical box: 800 x 500 mm Various accessories: Set of thread rolls

Built in: 1999-2004 100x print roll holder available; working condition

Roll-up station 0422 year 1996; ready for operation

2 stubs new pendulum roller bearings for swinging stress. Inner diameter d = 180 mm, outer diameter D = 380 mm, width 125 mm, weight approx. 60 kgeach e. main bearing for FOD gates, passage 71 cm also individually for sale 200 EUR/pcs; or incapitalinally packed

Huelsen or rolls with width: 3.0 - 23 mm Band thickness: 0.7 - 1.5 mm Inner diameter: 3.5 - 7.5 mm capacity: 270 rpm; very good -as good as new

Bushes or rollers with strip width: 3,0 - 23 mm Strip thickness: 0,7 - 1,5 mm Internal bush diameter: 3,5 - 7,5 mm Output: 270/min.; very good -like new-

Wire rod: 1.8 - 9.0 mm number of caliber: 13; very good