roll forming machines used for sale

tapered roller bearings -Weight: 3780 g -Outer diameter: 180 mm -Width: 34 mm -Inner diameter: 100 mm

tapered roller bearings -Bearing type: Tapered roller bearing -Bore: Ø 60 mm -Outer diameter: 110 mm -Width: 29.75 mm -Weight: 1.3 kg

spherical roller bearing -Bearing type: Self-aligning ball bearing -Bore: Ø 50 mm -Outer diameter: 90 mm -Width: 23 mm

Spherical roller bearings, self-aligning ball bearings -Bore: Ø 80 mm -Outer diameter: 140 mm -Width: 33 mm -Weight: 2.1 kg

Cylindrical roller bearings -Type: NJ 206 -d: Inside: 30 mm -D: Outer: 62 mm -B: Width: 16 mm -Quantity: 50x cylindrical roller bearings available -Price: per piece -Weight: 0.2 kg/piece

Roller chain, drive chain -Length per package: 5 m -reinforced 16B-1 roller chain -1-fold 1 x 17.02 -Number: 10 packages available -Price: 28 euros/m

Cylindrical roller bearings -Type: NU 204 E -d = Inside: 21 mm -D = Outer diameter: 46 mm -B = Width: 13 mm

Cylindrical roller bearings -Type: NUP 2314 -d = Inside: 70 mm -D = Outer: 150 mm -B = Width: 51 mm -Weight: 4.75 kg

Cylindrical roller bearings -Outer diameter: 72 mm -Inner diameter: 35 mm -Width: 23 mm

Cylindrical roller bearings -Outer diameter: 130 mm -Width: 31 mm -Inner diameter: 60 mm -Weight: 1.9 kg -Number: several available

Cylindrical roller bearings -Outer diameter: 140 mm -Width: 33 mm -Inner diameter: 65 mm

Cylindrical roller bearings -Outer diameter: 150 mm -Width: 35 mm -Inner diameter: 70 mm

Roller conveyor, roller track, roller track -Roller width: 630 mm -Conveyor length: 3400 mm -Roller diameter: 50 mm -Height: 350 mm -driven: via flat belt -Dimensions: 800/4100/H350 mm

Two-roll mill granite 300 mm working width 80 x 60 x 120 cm Approx. 300 kg

Bezel, setting stick, lynette -Max. passage: Ø 70 mm -Peak height: 250 mm -Weight: 10 kg

Roller conveyor, conveyor belt, roller track -Roller width: 400 mm -Conveyor length: 2000 mm -Roller diameter: 50 mm -Central spacing: 100 mm -Height: 300 mm -driven: via flat belt -without: flat belts -Dimensions: 2000/520/H300 mm -Weight: 90 kg

Rolling jaws, floating center jaws, low-profile jaws -Dimensions: 160/31/H63 mm -Weight: 3 kg

Mast rollers, forklift mast, ball bearings -Quantity: 3 pieces available -Price: per piece -Weight: 2 kg

Cylindrical roller bearings -Type: 30313 Price: per piece Quantity: 3 available -Weight: 2.4 kg

Roller chain, drive chain -Length: 5m -12 B-1 Roller chain -1-fold 3/4 x 7/16 -Quantity: 4 pieces available -Price: per piece -Weight: 8.3 kg

Layer-reeled solid wire for welding under inert gas in all positions. Shielding gas types: Ar, CO2 / Ar, CO2, O2 / CO2. Welding wire roll MAG wire electrode, unused, original shrink-wrapped in foil, ovp in cardboard! 15kg 1.2mm Manufacturer Union Type A600IG Probably for deposition welding Multiple available. For complete acceptance special price! Special price!

VERRINA CLR 216 X 4050 Sheet metal round bending machine Double roller with 4 rollers and double pressure Year of manufacture 1979 Capacity 4000 mm x 16 mm Roll length 4050 Roll diameter side rolls 370mm top & bottom roll 410mm Roll rise and fall 370mm Input 400/3/50 Hz 52 kW Rolling speed 2.9 / 3.9 / 6.8 meters per minute Control control panel Equipped with hydraulic drop, safety cable hoist Length 9000mm Width 2350 mm Height 2400 mm Net weight approx. approx. 29,500 kg

Bagel Machine / Bagel Machine Weight range 8" 60-85g /// 9" 85-130g ( max. 3600 pieces/hour ). New machine

roll diameter: 400 mm roll length: 1000 mm rolls drilled: peripher Nip adjustment: hydraulisch total power requirement: 2x 30 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 1400 mm Roller width: 1600 mm pressure: 40 t Pressure line: 250 N / mm Number of rollers: 2 Stück Upper roll: 320 dia Roller covering: Stahl, verchromt Heating - upper roll: Thermoöl Swimming roll - dia: 355 mm Roller covering: Flexroll-Manchon Clouth speed: 30 m/min Weight: 10 to dimensions of the machine ca.: 3,0 x 4,0 x 2,5 m • Inlet side with bearing cap for small skeins, • At outlet with Sochor arm and hydr. center winder, with thermic oil heating, Make: TOOL-TEMP, Switzerland, Type TT-380. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

End mill, roller cutter, milling cutter, disc cutter, slot cutter -Cylinder end mill: Disc cutter 99.6 kg -Type: various versions -Price/Fee: complete -Transport dimensions: 790/600/H210 mm -Weight: 99.6 kg

: 2000 mm Working width: 360 mm Wheel width: 360 mm roll diameter: 60 mm : 800 kg height adjustment: 650 - 950 mm weight of the machine ca.: 0,045 t dimensions: 2,07 x 0,48 x 0,21 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1000 mm plate thickness: 5,0 mm distance between columns: 1070 mm diameter of upper rolls: 130 mm total power requirement: 4,0 KW weight of the machine ca.: 1,15 t dimensions of the machine ca.: 2,55 x 0,65 x 1,1 mm - Electrically adjustable rear roller - Electrically adjustable lower roll (material clamping) - Digital readout for rear roller movement - Digital readout for lower roll movement (material clamping) - Hardened rolls - Conical rolling - Swiveling top roll - Brake motor - Emergency stop - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 550 mm roll length: 1500 mm rolls drilled: Kernbohrung Nip adjustment: hydraulisch 0 total power requirement: 90 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 350 mm roll length: 700 mm rolls drilled: peripher Nip adjustment: hydraulisch 0 total power requirement: 2x 15 kW Condition: new, with CE mark, Specification: Two Roll Mill 350 x 700 mm - new - cylinder diameter: 350 mm - cylinder length: 700 mm - cylinder boring: peripherally drilled - cylinder bearings: with grease lubrication - 2 cylindera chromed - nip admustment: hydraulically - new hydraulic unit - tipper guiding plates of nylon-polyethylen-material - stainless steel tray - bi-directional bars - AC brake motors: 2 pcs, each 15 kW, 400 V, 50 Hz - bevel gearboxes of transmission: 2 pcs - painting: with RAL colours acc. to customer’s specification - complete machine protection with stainless steel carters - new electric cabinet - new electrical system - new machine on-board system - new control panel Touchpanel 7 - PLC system: 1 piece, brand Siem ...

roll diameter: 400 mm roll length: 1100 mm rolls drilled: Kernbohrung Nip adjustment: hydraulisch total power requirement: 2x 30 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3554 mm plate thickness: 42 mm pre-bending: 36 mm Control: total power requirement: kW weight of the machine ca.: 49 t dimensions of the machine ca.: 7.3x2.4x2.5 m Stocknumber 2210024 Type of machine 4-roll CNC Plate bending machine Make FACCIN Type 4HEL 3554 Build in 2000 Type of control CNC Additional information Cap. 3554 x 42 mm prebending 36 mm Toprolldiam. 540 mm underrolldiam. 530 mm siterolldiam. 430 mm 55 Kw LxWxH= 7350 x 2400 x 2500 mm weight of the machine 49 ton The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mm plate thickness: 53 mm pre-bending: 45 total power requirement: 60 kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 2210020 Type of machine 4-Roll Plate Bending machine Make DAVI Type MCB 3053 Build in 1998 Type of control Conventional Additional information max. Plate widht 3050 mm Max. plate thickness 53 mm Max. thickness prebending 45 mm Toprol diameter 525 mm under roll diam. 470 mm Site rolls diam. 400 mm Power 78 Hp Hardened rolls Conical bending Dimensions: 6000 x 3100 x 6700 mm in very good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 400 mm roll length: 1000 mm rolls drilled: Kernbohrung Nip adjustment: hydraulisch 0 total power requirement: 45 kW Condition: used, overhauled Specification: Rolling mill 400 x 1000 mm - second-hand monobloc model, motor under the rolls - roll diameter: 400 mm - roll length: 1000 mm - rolls: with core bore, with central chamber for water cooling - Rollers mounted on bronze bushes with oil circulation lubrication via pump, - equipped with new slewing rings for connection to the water circuit - Gap adjustment: hydraulic, NEW - Hydraulic unit NEW - Tiltable guide plates - stainless steel roller container to hold the mixture - bi-directional rods - safety brake for NOT stop - AC motor: 45 kW - 400 Volt - 50 Hz - Painting: in RAL colours according to customer requirements - new control panel with touch pan ...

roll diameter: 560 mm roll length: 1500 mm rolls drilled: Peripher Nip adjustment: hyraulisch 0 total power requirement: 150 kW Condition: used, completely overhauled, with warranty Specification: rolling mill 560 x 1500 mm - used model external gearbox - motor sideways placed at the machine - roll diameter: 560 mm - roll length: 1500 mm - model: Duplocom / pluridrive - Peripherally drilled rollers for water cooling - Cardan joints between gearbox and rollers - Individual drive for the rollers, for variable friction - hydr. gap adjustment - Hydraulic unit - Tilting steel guide plates - rollers mounted on roller bearings with appropriate lubrication - rollers with new ball bearing slewing rings, make Maier, for the connection to the water circuit - One gearbox - two individual drives, each with: 2x 75 kW - 400 V - 50 Hz - two new frequency conv ...

Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings -Outer diameter: 310 mm -Width: 82 mm -Inner diameter: 200 mm -Weight 22.8 kg

Strapping machine, strapping kit, tensioning and sealing device, textile strapping kit -Dispensing trolley: Mobile dispensing trolley for plastic strapping, without accessories -Transport dimensions: 400/390/H520 mm -Weight: 11.1 kg

For sale we offer new scissor roller conveyor. Roll width 610mm Length retracted 1500mm Length extended 4000mm Height 690-1000mm Load capacity 130kg/m Quantity available: 4 pieces Other lengths available in stock: 8 and 10m Shipping worldwide Price per piece 4.100€ net plus VAT If you are interested, please contact us to confirm availability.

For sale we offer new scissor roller conveyor. Roll width 610mm Length retracted 3000mm Length extended 8000mm Height 690-1000mm Load capacity 130kg/m Available quantity: 2 pieces Other lengths available in stock: 4 and 10m Shipping worldwide Price per piece 6.700€ net plus VAT If you are interested, please contact us to confirm availability.

For sale we offer new scissor roller conveyor. Roll width 610mm Length retracted 3800mm Length extended 10000mm Height 690-1000mm Load capacity 130kg/m Quantity available: 1 piece Other lengths available in stock: 4 and 8m Shipping worldwide Price per piece 8.500€ net plus VAT If you are interested, please contact us to confirm availability.

For sale we offer new scissor roller conveyor. Roll width 760mm Length retracted 3800mm Length extended 10000mm Height 690-1000mm Load capacity 130kg/m Quantity available: 1 piece Other lengths available in stock: 4 and 8m Shipping worldwide Price per piece 8.900€ net plus VAT If you are interested, please contact us to confirm availability.

For sale we offer new scissor roller conveyor. Roll width 760mm Length retracted 3000mm Length extended 8000mm Height 690-1000mm Load capacity 130kg/m Quantity available: 1 piece Other lengths available in stock: 4 and 10m Shipping worldwide Price per piece 7.100€ net plus VAT If you are interested, please contact us to confirm availability.

For sale we offer new scissor roller conveyor. Roll width 760mm Length retracted 1500mm Length extended 4000mm Height 690-1000mm Load capacity 130kg/m Quantity available: 1 piece Other lengths available in stock: 8 and 10m Shipping worldwide Price per piece 4.500€ net plus VAT If you are interested, please contact us to confirm availability.

Curve/Conveyor Curve/Rollers 70 Degree Vanderlande with Drive Year of manufacture: 2023 Manufacturer: Vanderlande Model/ Type: Rollers, 70 degree curve Condition: used (as good as new) Total length outside: approx. 2040 mm Total length inside: approx. 1120 mm Total width: approx. 870 mm Conveyor width/roller width: approx. 740 mm Roller spacing/centre distance: approx. 100/50 mm Curve consists of 22 rollers Roller manufacturer: Interroll Steel frame Frame height: approx. 130 mm Frame width: approx. 30 mm Including SEW motor 0.75 KW Stock: 12 pieces Price per piece The conveyor technology ran until dismantling. Submission of an offer only with a valid imprint, sale only to commercial customers. Internal Article Number: 2026071904 Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high lo ...

The facility includes a comprehensive range of production and support equipment, including: 4 Cold Rolling Mills (4Hi & 2Hi) – including tandem rolling lines with speeds up to 500 m/min, processing strip widths from 4–100 mm and thicknesses from 0.4–4.5 mm. 9 Annealing Furnace Units – stretch and batch furnaces operating with nitrogen and hydrogen atmospheres, with temperatures up to 1,000°C. Inspection, NDT & Finishing Lines – including eddy current inspection, surface grinding, shaving, and coil-to-bundle conversion. 2 CRM Work Roll Grinders (WMW, Germany) – together with blanking lines capable of producing up to 240 hacksaw blanks per minute. Laboratory & Auxiliary Equipment – including tensile testing equipment, optical microscopes, compressors, punch presses, and other supporting machinery. In combination lot, but also available for individual pu ...

Fortuna dough dividing and working machine Type: A3 Completely overhauled repainted Division of 30 Weight range dough pieces 32-80 grams Dough insert per saucer 960-2400 grams with incubation electric head The robust design and duration oil lubricating of the transmission parts ensures a long service life Easy cleaning of the knife head 380V / 50Hz Weight of the machine approx. 640 kg Machine stands on a specially made wheelchair Dimensions: Height: 150 cm Width: 60 cm Depth: 70 cm The machine was completely dismantled and completely overhauled from the ground up. Then completely repainted.