roll forming line used for sale

De uitrusting bestaat uit: - 3 decoilerstations met een capaciteit van 5 ton - Ras richteenheid - Ras hoekuitsparingeenheid - Rashydr-unit voor het walsen van verstevigingsribben in het plaatwerk - Rasschaar voor het op lengte knippen - Ras vouwunit voor vierkante luchtkanalen

used pastry forming roller Kalmeijer KGM Kipferl 1380-910BProduct descriptionManufacturer: KalmeijerType: KipferlNr.: 1380-910Bowant: usedDough figure:Dimension: 40x34 mmThickness: 7.5 mmWeight: 6 grRoller width: 250 mmDetails see pictures.

used pastry forming roller Kalmeijer KGM Pretzel Small 1383-912AProduct descriptionManufacturer: KalmeijerType: Pretzel KleinNo.: 1383-912AZstand: usedDough figure:Dimension: 55 mmThickness: 4 mmWeight: 7 grRoller width: 250 mmDetails see pictures.

Kalmeijer Pastry Forming Roller KGM Flowers 1612-900BProduct descriptionManufacturer: KalmeijerType: FlowersNo.: 1612-900Bowant: usedPastry figure:Dimension: 55 mmThickness: 5.5 mmWeight: 15 grRoller width: 250 mmDetails see pictures.

Kalmeijer Pastry Forming Roller KGM German Männchen 1502-930BProduct descriptionManufacturer: KalmeijerType: German MännchenNr.: 1502-930Bowant: usedDough figure:Dimension: 82x33 mmThickness: 2.5 mmWeight: 8 grRoller width: 250 mmDetails see pictures.

Kalmeijer pastry forming roller KGM Taler small 1120-910AProduct descriptionManufacturer: KalmeijerType: Taler smallNo.: 1120-910AZstand: usedPastry figure:Dimension: 55 mmThickness: 4 mmWeight: 13 grRoller width: 250 mmDetails see pictures.

Kalmeijer Pastry Forming Roller KGM Nut Sticks 1263-930BProduct DescriptionManufacturer: KalmeijerType: Nut SticksNo.: 1263-930Bowant: UsedDough Figure:Dimensions: 77 x 25 mmThickness: 3.5 mmWeight: 11 grRoller Width: 250 mmDetails see pictures.

Kalmeijer Pastry Forming Roller KGM Kipferl 1380-910BProduct descriptionManufacturer: KalmeijerType: KipferlNr.: 1380-910Bowant: usedDough figure:Dimension: 40x34 mmThickness: 7.5 mmWeight: 6 grRoller width: 250 mmDetails see pictures.

Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mm NEW Manufacturer : Kalmeijer Type : KGM 250 NEW Order Number : 1263.920 C Order Number : 1600.905 C Order Number : 1600.900 C Order Number : 1120.920 C Order Number : 1120.919 C Order Number : 1100.935 C Order Number : 1100.940 C Order Number : 1383.919 C Order Number : 1270.900 C Order Number : Special Rollers  See picture for details

Line for forming cevapcici and cevapi (grinder with mixer, portioning device and belt transporter)

FORMING, GLUING AND BREADING LINE, KOPPENS + MULTIFORCE CONTRACT LIMITED Technical description: Forming machine Koppens, type: VM 400-HS Dimensions: 2100 x 800 x 2080 mm Gluing machine Koppens, type: ER 400 Dimensions: 1435 x 815 x 1620 mm Breading machine Koppens, type: PR 400 Dimensions: 2470 x 670 x 2050 mm Gluing machine Mutliforce Contract Limited Dimensions: 1100 x 600 x 1670 mm

Year 1996, CE norm, complete instructions, control Delem, machine in TOP condition with warranty, more details on request

Thank you for your interest on our machines, we like this may offer you: Manufacturer: Sandeep Singh Model: KSF 800 marzipan & nougat transformer Year of construction: 1977 Working width: 800 mm Capacity: á 20mm - article 8 g - 180 kg /. Electr. Values: 230/400 V, 50 Hz Details: - with 17 different form rollers (!) -Suitable for large production volumes -Plastic rollers with steel core -Stepless speed control -with prior extruder and feed conveyor -For Marzipan and nougat mass We offer this machine "as available" without any warranty/warranty claims or representations for sale. from stock Hess. Lichtenau; bulk

Many thanks for your interest on our Drop Rollers for hard candy, please find follow our offer: Type : Candy roller/ Drop Roller for Hard Candy, hand driven roller size. : approx 58mm x 177 mm Packing dimensions : approx. 630 x 580 x 450 mm (lxwxh) (wooden box suitable for export) Net Weight : approx. 65 kg. Gross weight : approx. 95 kg. Different: with one set brass drop roll round/egg shape without structure, round 300 other types possible. For every roll you decide for size, or you can give us your own form, Also available machine with working table, electrical engine and gear box. We offer this machine in as-is where it is condition delivery time: According to the arrangement ex warehouse Hess. Lichtenau

Can make meatballs and burgers up to 130mm in diameter. and height up to 30 mm; – The height can be adjusted; – Equipped with a speed controller; – Limit switch for more tape security; – Motor: 0.3 kW – Single-phase motor – Hopper capacity 24 l. Standard shapes: Round burgers with diameter: 22 mm. 32 mm. 40 mm. 65 mm. 100 mm. 115 mm. 130 mm. Round meatballs with diameter: 22 mm. 32 mm. 40 mm. 65 mm. Depending on the chosen thickness, a different weight of the final product can be achieved with one mold. Accessories: As standard, the machine comes with one mold. As an option, you can also order: Round burgers with a diameter of: 22 mm. 32 mm. 40 mm. 65 mm. 100 mm. 115 mm. 130 mm. Round meatballs with diameter: 22 mm. 32 mm. 40 mm. 65 mm.

automatic meat ball and fishball forming machine, beef balls, pork balls, fish balls, squid balls, 400-600kgs hour, 18-35mm diameter, stainless mobile frame, 3Ph

Used ILLIG RDK 54 Thermoforming Line, Age 1995 Unwind Stand Indramat Servomotor Indexing Max. Film width 610 mm max. Thickness range 0.18 to 2.5 mm. Hardened Transport Rails, Double Heating, Heating Load 41.0 kW. Heaters move forwards automatically with pneumatic control Sheet Sag Control Form Area 550 x 400 mm Forming & Punching in Mold with integrated Steel Rule Die. Positive Draw 20 mm, Negative Draw 20 to 40 mm Trimming Force 50kN. Top and Lower Platens Moved by separate Indramat Servomotors Heavy duty Toggles on both upper & Lower Platen Stacking/ Counting Station Waste Material Winder Inline ILLIG RS75b Grinder with Sound Proof Housing & Controls. Suitable for PS, OPS, PP, PE, PVC etc.

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K, age 1989 Thermoformer with auto-start facility SEW Eurodrive Servomotor Indexing Max. material width 730 mm Max. Indexing length 300 mm Top & Lower heaters, total connected load top & bottom heaters 74.2 kW Drive Motor 6.93 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Hydraulic Plug Assist, Max. Part height 125 mm Hydraulic Power Pack Control Cabinet with Optimised Schleicher (PLC) Controls Encoder on Main Shaft Auto Lubrication Pump. Inline ILLIG UG70b Counter/ Stacker Delivery Conveyor for Counted/ Stacked Cups with Ejector Table

Kalmeijer pastry moulding machine KGM Table Model Pastry moulding machine Kalmeijer KGM with 10 plates and 2 moulding rollers. Pastry moulding machine is suitable for the production of mürbeteigen. With different moulding rollers, the pastry can be moulded into the desired (depending on the mould ingeu) roll. The dough feed and the moulding roller are neatly removable to clean them. The moulding roller can be heated by means of heating. Sheet metal feeder is automatic, the machine stops when there is no sheet metal on the trensport plate. Machine is compact and easy to use. Kalmeijer pastry moulding machine with 1 moulding rollers with 10 black baking sheets Table equipment with heating automatic sheet metal feeder thick of the dough figures is adjustable Dough hopper, moulding roller, dough feed roller is easily removable for cleaning Easy to use The trasnport beams for ...

- Flow forming machine FLOTT SB 20 FB plus - Tapping device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Stepless speed control via central rotary knob - EMERGENCY STOP push button - Thermal overload protection - Spindle stop - Drill protection with electr. Hedge - Connection cable with CEE plug Flow molds for the production of threads in thin-walled metallic materials, Flow forming capacity at 3 mm sheet thickness 8 mm - Spindle: MK II - Drilling depth (mm): 100 - Projection (mm): 240 - Column diameter: 82 mm - Usable work surface (W x L) (mm): 340 x 280 - Table height adjustment with rack and pinion - Spindle speeds infinitely variable (1/min): 20 – 4,000 - Dimensions (mm): 355 x 705 x 1825 For more TECHNICAL DATA, please refer to the product sheet! 3-year warranty for single-shift operation Deliv ...

Product number: 1832 Type: VM400/30 Serial number: 001 Belt width: 400 mm Capacity: max. 30 strokes/min Air consumption: 6 bar Power: 3 x 400V, 50Hz, 5.5kW Dimensions: 2000 x 800 x 1800 mm Weight: 550 kg

Fronius magicwave 2600, with wire feeder can be used for the robot welding. Machine is in great working condition, equipped with longines controls, wire feeder and welding gun connections for the robots.

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K (refurbished in 2003) Thermoformer with auto-start facility Indramat Servomotor Indexing Top & Lower heaters Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Pneumatic Plug Assist, Max. Part height 125 mm Control Cabinet with Optimised Schleicher (PLC) Controls Auto Lubrication Pump. Inline ILLIG ÜG70B Counter/ Stacker, with delivery conveyor Inline Grinder & Blower

power of 1.1 kW / 2,9A / 380V / 50Hz; the weight of a piece of 500 - 1200 g; productivity up to 1200 pcs / h; weight approx 280kg.

complete stainless steel Track width 600 mm Adjustable height of the finished product from 2 to 35 mm stepless speed (lower and top belt can be adjusted separately) with executable belt Mobile 0.5 kW Dimensions (L x W x H) : ± 2,250 x 1,000 x 2,100 mm

complete set: DEMAG 50T ERGOTECH COMPACT 50-200 1999 (-) ENGEL 75T ES330/75 VICTORY 2001 (working hours 81694) working good tech. condition T557211 for both machines 10 000 EUR

M. No.: 3284 Equipment / Additional information: (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Top heater max. 10,15 kW Driving motors 3,0 kW Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h COMPACT AND ROBUST - giving continuous high output. Easy and ergonomical operation (e.g. take- off height 1300 mm). QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe ...

Sind Hamburger forming machine

ILLIG STAL80 Trim Press, age 1988:- Technical data ILLIG STAL 80 :  Punching table area max. 1000 x 510 mm  Material width max. 800 mm  Infeed length 20 - 400 mm  Stroke height 200 mm  Mold height 272 mm Part height (positive and negative) max. 100 mm  Number of strokes (infinitely variable) 25 - 130 /min Trimmed Parts are stacked through the Punch Tool The Skeletal Waste is fed directly into the Grinder ILLIG RS75 Under the Trim Press Grinder, Motor 8.3 kW, age 1995

SENTE MAKINA HDTF-SI tube forming machine was built in 2022 in Turkey by SENTE MAKINA İNŞ. SAN. VE TIC. LTD. ŞTI. The machine is used in the HVAC industry for the production of precision ventilation ducts, compliant with Eurovent and Smacna standards. Spiro ducts are created from thin sheets of metal with a maximum thickness of 1 mm. The innovative cutting system eliminates the noise and hot sparks typical of traditional saws, guaranteeing smooth edges without the need for additional deburring. The HDTF-SI duct forming machine weighs 2480 kg. The SENTE MAKINA spiral duct machine is fully complete and consists of the following components: – main frame – sheet metal decoiler – forming heads (2 pcs.) – cutting system – stitching roller system for different sheet thicknesses – unloading table (2 pcs.) Technical data of the SENTE MAKINA HDTF-SI spiral tube machine  ...

Combination machine Manufacturer Mubea Type KBL100 5-fold combined Flat steel shears 150x19mm Profile steel shears e.B angle iron 160x7mm or 100x12mm Bar steel shear 70mm round Hole punching Jack 16mm All information to the best of our knowledge, but without guarantee!

Pastry moulding machine Kalmeijer KGM biscuit moulding machine Pastry moulding machine Type: Kalmeijer KGM with 2 forming rollers 10 baking trays thickness of the dough figures is adjustable Dough hopper, forming roller, dough feed roller is easily removable for cleaning Easy to use The trasnport belts for the sheets can be folded in and out Machine requires little space Machines can be driven on rollers Dimensions: Height: 122cm Width: 170cm Depth: 52cm

1250 x 2500mm TLF 2000w Laser STOPA Sheet storage, SheetMaster, ToolMaster, SortMaster Year: 2005

Hamburger forming machine, Sind, NEW Capacity: 2100 pieces / hour Hamburger forming diameter: 90 mm to 120 mm

Hamburger forming machine, Sind, NEW Capacity: 1000 pieces / hour Hamburger forming diameter: 90 mm to 120 mm

Janssen Pastry Moulding Machine Type: FM128 K4 with 1x speculoos roller Extra rollers available at extra cost Band width: 23.5cm with heating Height: 145cm Width: 80cm Depth: 50cm

Pastry moulding machine Type: Kalmeijer KGM with 2 forming rollers (speculoos + . ) thickness of the dough figures is adjustable Dough hopper, forming roller, dough feed roller is easily removable for cleaning Easy to use The trasnport belts for the sheets can be folded in and out Machine requires little space The machine is in need of overhaul Dimensions:  Height: 122cm Width: 170cm Depth: 52cm

Balkenzwinge 20 – galvanized Used - ready for immediate use! Galvanized beam clamps for support in beams and edge and ceiling formwork Length: 30 cm Height: 35 cm 6.9 kg Price: € 32,00 356 pieces in stock forming support 20 – galvanized Used - ready for immediate use! Galvanized beam clamps for supporting beams and edge and slab stop ends Length: 30cm Heigth: 35cm 6.9 kg Price € 32,00 356 pieces on stock

Product number: 2644J Type: VM400HD Belt width: 400 mm Capacity: max 50 strokes/min. Power: 3 x 400V, 50Hz, 7.8kW Dimensions: 2150 x 800 x 2250 mm Weight: 820 kg

Thermoforming Machine Brand: Kiefel, model: 76/225F. It shapes and cuts by vacuum pieces from rolls of PPE that are previously heated in the oven. Everything goes online, fully automatic and includes all empty aurxiliars, refrigeration, mold change trolleys, etc. Forming area: 760x2250 mm max, workpiece height: 220 mm pos. max, 30 mm neg. max, upper cutting force: 30 KN, lower cutting force: 30 KN, sheet line: 1575 mm, vacuum: 500 m 3/h, cycle time: ca. 20 sec (material dependence), glue type: butyl or hot melt glue, glue application speed: mx. 400 mm/sec (depending on the contour and type of glue), applicator head control: amount of glue depending on speed, tool change time: less 5 min, measures: 25500x6000x4600 mm.

COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine was manufactured in Italy in 1988. The thermoforming line, consisting of, among others, a heating station, a bulge photocell and a moulded parts conveyor, is designed for the fully automatic production of oversized parts using the thermoforming method. The COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine is equipped with a gauge measuring the thickness of the platen in order to avoid accidentally taking two platens from the package at the same time. The platens, by means of transport grippers actuated by pneumatic cylinders, reach the individual work stations, i.e. the preheating station, consisting of two opposing panels, the plasticising preheating station and the forming unit. In the forming unit, the thermoforming process takes place, during which a BOTTINI GIANNI press with an upper and lower moving table peripherall ...

THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) M. No.: 403 Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool: Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Ven ...

Ham press Erhard approx. 120 liters capacity, completely in stainless steel, compressed air operated, with intermediate boards and stainless steel brackets, Dimensions LxWxH approx. 107x59x99cm, weight approx. 180kg, good used condition, works perfectly

Technical specifications: Rated power, kW: 11,3 Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Control cabinet: included

Rheon Model KN100 Cornucopia Encruster. Maximum speed approx. 60 pieces per minute, depending on the product. Weight capacity from 10 - 90 grams. (2) 11.5" x 8" x 7" stainless steel feed hoppers, each with (2) 2.5" diameter feed screws. Approx. 5 inches wide discharge conveyor. Digital touch controls. Compact forming, filling and portioning machine Connection 400V, 16A-CEE plug Used machine from bakery

Illig RDM75K age 1998, refurbished in 2019, with Siemens S5 PLC Controls, used only for ca. 50,000 hrs ELAU B1 Display with Touchpad controls Thermoformer with auto-start facility Indramat Servomotor Indexing Max. material width 750 mm Max. Indexing length 480 mm Top & Lower heaters, total connected load top & bottom heaters 111.3 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 700 x 450 mm Hydraulic Cylinder Plug Assist with Bosch Rexroth Hydraulic Power Pack, completely Overhauled in 2019 Max. Part height 150 mm Max. Mold closing force 25,000 daN Auto Lubrication system Siemens S5 PLC Controls New original ILLIG/ RITTAL Control Cabinet Cooling System added in May-2023.

ILLIG PLS75B Inline Counter/ Stacker, with Hole Punch Station, age 2006 used Inline with ILLIG RDM75K ! Max. Stacking Area: 750 x 350 mm Min Height of formed product: 25 mm Max. height of Formed Product: 150 mm Min. dia. of product : Ø 40 mm Max. dia. of Product: Ø 150 mm Max. length of Product Stack: 730 mm Output rate of Product Stacks: 1200 Stacks/ hr Rotating Head to neatly remove Products from the Thermoformer Mold Inline Hole Punch Station Inline Counter Stacker Station Compressed Air: 0.2 L at 6 bar, approximately Total Drive Rating: 19 kW Electrical specifications: 400 V, 3 phase, 50Hz (N/ PE) Cross delivery conveyor for counted cups. All Motors are Indramat Servo Motors Siemens SIMATIC TOUCH LED Operator Control Panel with Touch Pad Controls Siemens S7 PLC Controls Delivers Counted Cups/ Containers at Right Angles to machine direction New (Feb- ...

POLYTYPE BDM 611/ 916, 8-Color Cup Printing Line, age 1999 Consisting of: Elevator Tray Feeder Cross Conveyor feeder Universal screw Denester ARCOTEC CG30 Corona Pretreatment System with Arcotec Leak Tester 8-mandrel Indexing Turret, with Mandrel Holders for Cups UVITERNO Model Mono-Jumbo 8015, 9 kW, UV Curing-On-Mandrel Positive Blow-off, final dual Timing Belt take-off Conveyor to counter Stacker station with Ejector Tray. Max. Cup dia.130 mm Min. Cup dia. 60 mm Max. Height of Cups 150 mm Min. height of cups 35 mm Max. Printing Length : 362 mm Taper 2 - 10 degs Max. speed depending on size & shape of Cups: 36,000/ hr Siemens S5 PLC Controls Siemens CORTOS OP25 display with Touch-pad Controls.