roll forming for used for sale

Nominal weight of the falling parts: 750 kg Max. number of blows per minute: 105 Kinetic energy: 1900 kg Distance from an axis of the slider up to bed: 750 mm Cylinder diameter: 600 mm Diameter of the plunger: 630 mm Max. headstock travel: 835 mm Dimensions: -Left-to-right: 3940 mm -Front-to-back: 1430 mm Height above floor level: 3260 mm Weight: -With an anvil-block: 25600 kg -Without an anvil-block: 16600 kg

Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Manufacturer: Hagen Battery, Charger Belatron Type E220 G24/50 B-FB -Input voltage: 220 V 50 Hz -Power: 25.2 V/50 A -Dimensions: 540/330/H420 mm -Weight: 40 kg

Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Manufacturer: Jungheinrich, charger type DLW 12/20 SN -Input voltage: 220 V 50 Hz -Power: 12 V/20 A -Dimensions: 410/200/H340 mm -Weight: 12 kg

lifting mast, stacker mast, forklift mast, lifting frame, rear loader -Manufacturer: Clark, forklift mast from forklift type C500-Y80 -Load capacity: approx. 4000 kg -Lifting height: mm -Recording/Dimensions: see photos / technical drawing -Dimensions: 1245/420/H2350 mm -Weight: 1120 kg

Fork carrier, forklift blade, pallet fork, forklift fork, for wheel loader, forklift, telehandler, stacker, tractor -Fork carriage: without forks -Load capacity: 1500 kg -Beam width: 2500 mm -Forks: available in a wide selection -Total dimensions: 2500/130/H400 mm -Weight: 370 kg

Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Charger: for forklifts, type D 24/200 MULTI WF200 -Input voltage: 400 V 50 Hz -Power: 24 V/200 A -Dimensions: 555/520/H890 mm -Weight: 119 kg

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipper, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1400 mm -Cross-section: 125 x 45 mm -Recording: see photos -Transport dimensions: 1520/560/H125 mm -Total weight: 148 kg

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipper, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1800 mm -Cross-section: 200 x 60 mm -Recording: see photos -Transport dimensions: 2060/1080/H200 mm -Total weight: 487 kg

Lifting mast, stacker mast, forklift mast, lifting frame, rear forklift -Manufacturer: Baumann, forklift mast from sideloader type AS 60/18/15 -Load capacity: approx. 6000 kg -Lifting height: mm -Recording/Dimensions: see photos / technical drawing -Transport dimensions: 3200/1620/H750 mm -Weight: 2100 kg

Lifting mast, forklift mast, forklift mast, lifting frame, rear forklift, triplex mast -Manufacturer: Linde, Triplex mast for electric forklift type E20 -Load capacity: 2000 kg -Dimensions: see photos / technical drawing -Dimensions: 2530/1150/H415 mm -Weight: 1070 kg

Lifting mast, forklift mast, forklift mast, lifting frame, rear forklift, triplex mast -Manufacturer: Linde, Triplex mast for electric forklift type E20 -Load capacity: kg -Dimensions: see photos / technical drawing -Dimensions: 2230/1150/H375 mm -Weight: 920 kg

Force gauge, force measuring device, calibration, force measurement technology, scale, crane scale, hanging scale -Manufacturer: dynafor , tensile force measuring device crane scale -Measuring range: up to 20 t -Dimensions box: 490/160/H160 mm -Total weight: 12 kg

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipper, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1195 mm -Cross-section: 100 x 45 mm -Recording: see photos -Transport dimensions: 1370/610/H100 mm -Total weight: 112 kg

Capacity: 1 200 T, Total stroke: 500 mm, Stroke of main crank shaft: 318 mm, Stroke of mobile die: 215 mm, Stroke/min: 27, Bar diameter: 50-90 (150) mm, Max diameter of peace: 152mm, Max weight of piece: 5 kg, Main motor power: 75 KW, Area of machine : 6400 x 4420 mm, Hight of machine: 3830 mm, Weight: 128.0 T

2000 Ton Sumitomo Hot Forging Press line Year 2006 Stroke 350 mm (13.78") Strokes per min 75 Shut height 850 mm (33.47") SlideAdj. 7 mm (.27") Ram size 1200 mm LR X 1300 mm FB Bed size 1320 mm LR X 1300 mm FB 4 stage transfer system Slide knockout Bottom knockout Scrap System Dual Die Changer Extra Die Shoes Billet Heater and Billet Saw Also Available This line was used by HONDA to make transmission gears, It takes a billet, cuts it to size, heats it to 1300 C then the press hits it 4 times. It can determine good from bad parts, the bad parts get sent to a quench tank, the good parts get sent into a cool down conveyor that you can pick the parts up by hand at the end. The entire system was ran by one operator.

Weld edge former, weld edge former, weld preparation, weld edge forming machine, edge milling device, edge milling machine, mobile milling machine -Manufacturer: BDS, Weld edge former/edge milling machine with accessories -Type: SKF 20 -Power: 1.1 kW -Accessories: see photos -Box dimensions: 460/355/H355 mm -Total weight: 33.2 kg

Transnorm Rising falling Incline belt conveyor GF 9820-700-600 RA2087 Technical data: Conveyor length (NL): 9820 mm (6000 mm riser segment + 3820 mm forerun) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DRS71M4BE1/MM07/LN Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 9820 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eu ...

Weld edge former, weld edge former, weld preparation, weld edge forming machine, edge milling device, edge milling machine, mobile milling machine -Manufacturer: BDS, Weld edge former/edge milling machine -Type: SKF 20 -Power: 1.1 kW -Accessories: see photos -Box dimensions: 460/355/H355 mm -Total weight: 29.4 kg

Transnorm Rising falling Incline with arch and forerun belt conveyor GF 12965-700-600 RA2076 Technical data: Conveyor length (NL): 12965 mm (3000 mm forerun + 6865 mm incline + 3100 mm arch) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Frequency converter for stepless speed controll Drive: SEW gear motor, R27 DRE80M4BE1/MM15/LN Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 12965 Nominal / outs ...

Crane fork, loading fork, load fork, pallet fork, pallet crane fork, lifting equipment, roller lifter -Crane fork: with adjustable weight compensation -Type: Hoist 630x475 -Load capacity: 250 kg -Tin length: 490 mm -Usable height: 610 mm -Dimensions: 635/520/H795 mm -Weight: 21 kg

Clamping bars, clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, fork clamping irons -Tensioning bracket: Fork clamping iron, beveled -Slot width: 25 mm -Dimensions: 320/65/H40 mm -Weight: 3.8 kg

Forklift battery charger, industrial charger, forklift battery charger, industrial charger -24 volts -Power: 63 A -Connection: 220 volts -Weight: 110 kg

Forklift battery charger, industrial charger, forklift battery charger, industrial charger -24 volts -Power: 64 A -Connection: 220 volts -Weight: 50 kg

Anchor system DW 15 Nut joint plate new, galvanized = 6,90 EUR/piece Prestressing steel DW15,0,85m = 4,20 EUR/piece Prestressing steel DW15,1,00m = 4,80EUR/piece German product manufactured according to DIN with manufacturer's warranty All prices excl. VAT and transport Subject to clearance Company SFS Andreas Becker e. Kfm., Tel. 07305/9562350, Fax. 07305/9562352 , VAT NUMBER: DE279047055 Office/ warehouse address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-Mail: SFsystemst-Online Mobile: 0049 176 70044689 Mr. Becker Registry Court Ulm: HRA722943

H16 Timber beam formwork girder Height 16cm, Width 65mm, Weight 3,3kg/meter The tried-and-tested components for many peeling systems. Formwork girders are basic of many formwork systems and can be used individually. The carefully manufactured beams prove themselves thousands of times a day on many construction sites. The location is our warehouse in 5202 Neumarkt For further information or a viewing, I am always at your disposal. You can reach us at Tel.Nr.: +43 664 1296830 or by e-mail: officeberger-international.at Berger Construction Equipment GmbH

Forklift battery charger, industrial charger, forklift battery charger, industrial charger -24 volts -Power: 20 A -Connection: 230 volts -Number: 7 chargers available -Price: per piece -Weight: 18 kg/piece -functionally tested

We offer formwork girders from Doka & Peri H20 and H24 inspected and sorted - ready for immediate use. Doka Beam I tec 20: Doka Rental Storage Quality - €6.50 per linear metre The I tec 20 composite formwork beam is a solid wall girder with a special structure in accordance with DIBt approval and innovative polyurethane final reinforcement for lower material use and extended service life. Doka Carrier H20 top P: Doka Rental Storage Quality - €6.00 per linear metre The resistant formwork beam in solid wall construction High-quality, robust, durable – the Doka H20 top P beam is a durable solid wall beam with a web made of a special flat pressed panel, which can be used in wall and slab formwork systems. The innovative polyurethane final reinforcement reduces damage and guarantees up to three times longer service life. GT 24 lattice girder: 5,00€ per linear metre Wel ...

Effort 2000t moving matrix 280 mm landing pad 570 mm landing slider after closing the matrices 390 mm Number of moves of the ram, stroke / min 25 Electric motor power 160 kW Dimensions, mm: LWH = 856053604850, the level above the floor is 3200. Weight of the car without electricity: 239.8 tons. Weight of the bed: Front part: 82 tons. Rear part: 55t. Weight 270 ton

Lifting mast, forklift mast, forklift mast, lifting frame, rear forklift -Free-view mast -Load capacity: 2000 kg -Lifting height: approx. 4000 mm -Forklift shield: 1150 x 405 mm -Dimensions: 350/1150/H2620 mm -Weight: 720 kg

Component size: Length 1700 x Width 1050 x Height 1050 mm Printing method: The patented VFGF (Variable Fused Granulate Fabrication) technology is a further development of pellet 3D printing with variable nozzle opening. It prints in high resolution only where necessary, for example on visible surfaces, and efficiently fills inner areas with thicker webs. In this way, VFGF combines the advantages of FDM (Fused Desposition Modeling) for fine details and complex geometries with those of granulate printing (high application rates, material variety, lower costs). Intelligent algorithms ensure the right amount of material in the right place at all times, even for complex shapes with overhangs or support structures. Areas of application: For prototypes, individual parts, small series and also for higher quantities. By melting in a specially developed screw extruder, high throughputs ar ...

Transnorm Rising falling Incline with arch and forerun belt conveyor GF 7600-700-600 RA2101 Technical data: Conveyor length (NL): 7600 mm (800 mm forerun + 6000 mm incline + 800 mm arch) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Frequency converter for stepless speed controll Drive: SEW gear motor, R27 DT80N4/BMG/TH Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 7600 Nominal / outside width ...

Transnorm Rising falling Incline with forerun belt conveyor GF 4780+800-700-600 RA2103 Technical data: Conveyor length (NL): 5580 mm (800 mm forerun + 4780 mm incline ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Frequency converter for stepless speed controll Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 5580 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentrala ...

We offer a Doka Framax 270 wall formwork 260.15m² complete with accessories on request. New value of the formwork 188407,00€ Special net price 58545,00€ Accessories 14756,00€ New value approx. 31880,00€ The formwork was cleaned and checked. Partly new formlining. Original Doka rental warehouse quality Item No. Description 3 588103500 Framax Xlife element 2.40x2.70m 36 588100500 Framax Xlife element 1.35x2.70m 10 588122500 Framax Xlife-Uni-Element 0.90x2.70m 3 588122500 Framax Xlife-Uni-Element 0.90x2.70m 7 588102500 Framax Xlife element 0.90x2.70m 6 588104500 Framax Xlife element 0.60x2.70m 8 588105500 Framax Xlife element 0.55x2.70m 5 588106500 Framax Xlife element 0.45x2.70m 16 588108500 Framax Xlife Element 0.30x2.70m 1 588108500 Framax Xlife element 0.30x2.70m 12 588130500 Framax Xlife inner corner 2.70m 12 588126000 Framax outer corner 2.70m On ...

Diesel forklift, diesel forklift, forklift, 4-wheel forklift -Manufacturer: Hyster, Diesel forklift, 4-wheel forklift, type 4.50 XL -Load capacity: 4500 kg -Lifting height: 2820 mm -Tine length: 2000 mm, cross section 150 x 60 mm -Operating hours: 9473 h -Forklift dimensions: 3160/1410/H2225 mm -Weight: 6900 kg

We offer Dokadek element pallets with an 85% discount - Doka Mietlagerqualität 21 x Dokadek element pallet 0.81x2.44m, used - with 85% discount - 69,90€/piece 12 x Dokadek element pallet 1.22x2.44m, used - with 85% discount - 76,35€/piece If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Phone 07305/9562350 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Ulmer Straße 1 89614 Öpfingen E-mail: sfsystemst-online.de Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks -Forklift tines: 2 pieces/1 pair -Length: 1200 mm -Cross-section: 80 x 40 mm -Image: 410 mm (see sketch in the photos) -Transport dimensions: 1345/600/H90 mm -Weight: 81 kg

Lifting mast, forklift mast, forklift mast, lifting frame, rear forklift, clear view mast -Manufacturer: Toyota, forklift mast, clear view mast from front forklift -Load capacity: 2500 kg -Lifting height: 3300 mm -Dimensions: see photos / technical drawing -Transport dimensions: 2070/1160/H590 mm -Weight: 666 kg

Lifting mast, forklift mast, forklift mast, lifting frame, rear forklift, triplex mast -Manufacturer: Still, Triplex mast for forklift mast from front forklift -Load capacity: 1600 kg -Dimensions: see photos / technical drawing -Dimensions: 1940/1050/H350 mm -Weight: 573 kg

Transport carriage IVG, built in 2020, craneable, load capacity 3to, unused. Transport carriage IVG, YOC 2020, unused, load capacity 3to, for the transport of turbine shafts or other objects, craneable, with reinforced attachment points for slipping or for safe transport with a forklift. Multiple presents. Dimensions approx. 2,400x750x500mm Dimensions approx. 2,400x750x500mm Dimensions approx. 2,000x750x500mm

Universal formwork Paschal Raster Universal formwork for foundations, walls, columns, beams, shafts, curves (polygons), landscaping construction, prefabricated elements. Versatile and flexible for use as manual and large-area formwork. Thanks to the modular principle, systemic formwork is very possible, even with complicated floor plans. The flat steel frames guarantee the robustness and durability of the formwork. Compatible with all PASCHAL systems. Connecting bolts as a universal fastener for all elements and accessories.

A Hyster forklift is offered. Lift height: 5250mm, track width: 1130mm, load capacity: 4000kg, fork length: 1250mm, fork carriage/attachment width: approx. 1220mm, engine power: 65kW. Dimensions: X/Y/Z: 4150mm/1380mm/2440mm, weight: approx. 5880kg. An on-site inspection is possible.

SEFA Pneumatic Large Format Press SLIDE-1285, Transfer Area 125 x 85 cm Bought at the beginning of 2021 - works perfectly - hardly used and in very good condition There is still a 5-year warranty on the heating element! Pneumatic Large Format Heat Press Pull-Out Worktop Extremely accurate temperature control +/- 1° thanks to multi-zone measurement technology Large touchscreen display 4 press programs can be stored, production counter - Transfer area 125 x 85 cm, for grouting of slabs up to a size of 120 x 80 cm - Digital time control 0 – 1,800 seconds - Digital temperature control 0-230°C - Contact pressure up to 386 g/cm² - Maximum material thickness 50 mm - Connection data: 12 KW, 400 VAC 3-phase, 20 A - Dimensions press: (WxHxD) 1286 x 794 x 2153 mm - Weight 419 kg The machine needs high-voltage current! Without guarantee and war ...

Specifications: - Total width approx. 800 mm - Work surface length / web length approx. 120 mm - Working surface depth / web depth approx. 120 mm - Total depth approx. 100 mm - Round horn approx. 340 mm - Square horn approx. 340 mm - Anvil height with substructure approx. 820 mm - Anvil weight approx. 65 kg - Substructure approx. W 420 x D 420 x H 300 mm - Substructure mounting hole 85 mm - Weight of substructure approx. 35 kg

Forklift battery charger, industrial charger -Output: 36 volts -Power: 50 A -Connection: 220 volts -Dimensions: 560/350/H355 mm -Weight: 40 kg

Weight: 0,08 tons Length mm: 1900 Width mm: 550 Height mm: 700 Condition machine : Moderate Photos/film available: Photos available

-Continuous forms Collator Bama -Year 1990 -Six stations -Continuous delivery with speed controls -Crimp lock, Multiflex on both sides -Gears size 8”-11”-12”

Eccentric shaft for hot forging press K8548 6300T Weight, kg 27 800

Lifting height: 3000mm, rated load capacity: 7t, load center: 600mm, weight: 11,29t, operating hours: approx. 3000h, with 360° rotator and air conditioning, the rear axle is defective (mounting pin and wheel hub). An on-site inspection is possible.

Drive gear for hot forging press K8548 6300T Weight, kg 15 700

Driven gear for hot forging press 6300T Weight, kg 1300