rol used for sale

The power plant, based on a 5 MW gas turbine CENTRAX 501 KB7 is complete with all needed equipment, allowing a steam output of 20 tons per hour at 20 bar. From ZERO hours until the last working day all maintenance was performed by Centrax under full maintenance contract.

-Single colour size 48x65 cms. -Year 1991, Water dampening -Complete with all parts and accessories -All checked and cleaned

Rolandmatic, RCI-II, 2 compressors (for card- board), all cardboard-devices, plenty casettes to save printing-jobs, not to adjust the machine again at the next same printjob

Pecom-Press-Center linear-RCI Roland Deltamatic damping Chambered doctor-blade Lightlox-screen-rollers PPL-Autoplate cylinder surfish-finished 1.828 mm Extend-delivery Prepared for IR/TL-module Roland Secomatic IR/TL End-dryer with 2 IR-dryer TL with 12

Perfector 1/5 and 6/0, RCI CCI Comand Table, SAPC Semi Autoplate Change, Rolandmatic Dampening with Technotrans Refrigerator, Auto-Wash, Double Size Impression Cylinders, Roland Mabeg Jet Feeder, Steel Plate on Overlap, High Pile Delivery, Autosize, IR Dryer and UV Dryer, Standard Accessories

1986 4 Color Serial No.: 638 Size: 52x72 cm 55 million Mabeg Feeder Hybrid machine with Eltosch UV Dryer Conventional Damp. Weko T66C under Power Test possible Available: immediately Located: Germany

Edges and facets grinding machine. Grinding angle: 45 degrees. Support table area: 100 x 320 mm Power supply: 380 Vol, 16 Amp. Incl. substructure with dust extraction, the extraction hose is unfortunately missing., 2 pieces of new compartments - sanding pad, diameter: 165 mm. Working height: approx. 105 cm. Weight: approx. 80 kg. Good operational condition. The machine can be inspected and demonstrated under power by arrangement and is immediately available.

Manufacturer: Gerteis Model: GMP-Polygran Macro Pactor 250/100/3 Year: 2004 Type: roller compactor, granulation unit for the pharmaceutical industry. Feeding screw Tamping screw Compaction zone with pressure rollers Granulation area with star rotor and screen Force: 1 - 20 KN/cm Gap width: 1.0 - 6.0 mm Pressure roller speed: 1 - 30 rpm Roller diameter: 250 mm Roller width: 100 mm Capacity: 60 - 400 Kg/H (normal value: 200 Kg/h) Equipment dismantled and stored. Full electrical and technical file + program backup available. Electrical and safety control cabinet not available . These elements can be quoted separately.

Reference Num.: 4028 Brand: MAN Roland Type: R 104 T 01 Construction year: 1994 Impressions: 45 mio Size: 480 x 660 mm Available: directly Status: Not in production Location: Deutschland Sheet size: min 210 x 280 mm, max 480 x 660 mm Printing speed: max 13,000 sheets/hour Printing units: 4 Machine size: Length: 4,271 mm, Width: 2,740 mm, Height: 1,865 mm Total weight: kg 1,171 / lbs 2,582 Equipment: - RCI - Rolandmatic - WEKO Puderapparat - Bacher-Registersystem - Platten Schnellspannschienen - Edelmann-K?hlung - Superblue

Swivel ring, swivel bearing ROLIX Type: 08 0260 00 zz00 A No. 0430 medium bearing diameter: 260 mm inner diameter: 190 mm outer diameter: 329 mm without teeth sealed with rubber New ! Dimensions: 330 x 330 x 50 mm

YEAR: 1991 COUNTER: 52M DETAILS: MAX PAPER SIZE 520 X 740MM MAXIMUM PRODUCTION SPEED 12,000 SPH RCI REMOTE CONTROL INKING DESK ROLANDMATIC ALCOHOL METERING DEVICE AND COOLING SYSTEM QUICK PLATE CLAMPS CHROME IMPRESSION CYLINDER 4 GRIPPER MODEL WEKO T66 POWDER SPRAYS

Manufacturer: Holzher Vorschub 3 Rollen, Type: ET 117, Feeding by rollers: 3 Rollen, Technical data:: 0,75 , Speeds: 4, Deflection of the pendulum axes mm: ca.25 mm,

Manufacturer: Elektronikkarte Heesemann Kuhnke Rollensteuerung, Type: für Heesemann Druckbalken signale, FREE TEXT: Rollensteuerung 42444100,

Manufacturer: Transport Rollengang, Working length mm: 2500, Working widht mm: 800, Durchmesser Rolle mm: ca 80, Anschlaglineal link und rechts (ohne verstellung): yes, : ohne Antrieb,

Manufacturer: Roma Rolltor Kunststofflammele, Year: ca2000, FREETEXT1: mit Antrieb , FREETEXT2: Kunststoflamelle, FREETEXT3: 2 Führungschienen<CRLF>3380 mm, FREETEXT4: Rolltorhöhe 3380 mm, FREETEXT5: Rolltorbreite 3340 mm, Year :ca2000

Thread cutting head with chaser jaws, thread cutting stock, Tapping machine, pipe thread cutter -Inch thread: 1- 2 inches -Weight: 6.5 kg

Air cooler, evaporator, cold store, refrigerated container, cold room -Number: 2x fans 0.58 kW 1200 watt -Weight: 16 kg

Thread cutting head with chaser jaws, pipe thread cutter, Thread cutting stock, cutting stock set, ratchet thread cutting stock -Inch thread: 4 dies R1/2 , R3/4, R1 , R1 1/4, ratchet -Transport case -Dimensions: 435/205/H90 mm -Weight: 8.6 kg

Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter -Rollers Central Central ratchet lever -with: cutting head R1 -Dimensions: 500/85/H80 mm -Weight: 2.6 kg

table diameter: 200 mm workpiece height: 100 mm number of wheels: 1 Control: Robot CNC total power requirement: 6 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 1,83 x 2,04 x 2,1 m Technical data - Grinding capacity : Ø 0.025 –12.7 [mm] - Bar diameter : Ø 1.0 –12.7 [mm] - Grinding length : W15 (option W20) - Z-axis : 35[mm] Resolution : 0.5 [µm] – X- axis : 25 [ mm] Resolution : 0.1µm – Y-axis : 286[mm] Resolution : 0.5µm – U- axis : 15 [mm] Resolution : 0.1µm Head Motor: 0.70 [kW] Rotation: 300 – 3000 [rpm] Grinding - Raw grinding : 1.5 [kW] Spindle : Ø 60 [mm] Grinding wheel diameter : Ø 200 [mm] Cutting speed : 30 m/sec. - Completion: 0.75 [kW] Spindle: Ø100 [mm] Grinding wheel diameter: Ø150 [mm] Cutting speed: adjustable - Dimensions (L x W x H): 1830 x 2040 x 2100 mm - Weight: approx. 1800 [kg] Accessories - Loading and unloading robots - F ...

Printing machine MAN Roland 308 4/4 8/0 Not all inking units are in order. Built in 1999 145 million Art.Nr. PS5915

impressions: 26 Mio. max. printing speed sheets: 10000 /h max. paper size: 35x50 cm dampening system: Varn Kompac dimensions of press (L x W x H): 120 x 150 x 195 cm voltage: 380 V frequency: 50 Hz current: 15,5 A weight: ca. 1900 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PPL Rolandmatic RCI 2 Densitometer only for read - not connected ith RCI Grafix powder spray Steel plate feeder and delivery Technotrans chiller unit overhauled in 2015 Ink temperature control IR dryer All ink fountains overhauled in 2016 Eltosch IR Dryer with 6 lamps Tresu coater Extended delivery APL Eltex antistatic Ionizer at the feeder Safety guards Clean system with water in suburbs of Anilox cylinder Very good condition Can be seen in production

RCI Rolandmatic Dampening Baldwin Cooler Grafix Powder Sprayer Perfecting 2/0 - 1/1 With Standard Equipment Very Good Condition Immediately Available

complete extrusion line for 3-layer Rolbatch film. The presented model has the catalog number 120/75 / 75-1800. The line is equipped with three extruders - ϕ120 (capacity -350 kg / h) and 2xϕ75 (capacity - 100 kg / h), screen changers, trapezoidal extrusion head, water tank, cooling unit, edge cutting device, winding devices and control system. Bolts, cylinders and long head are made of nitrided tool steel. The machine is operational, but is currently in storage and is not being produced. The most important technical data: Producer: Rolbatch Model: 120/75 / 75-1800 Sheet thickness: 0.3-0.5 mm Width:

Man Roland 305 5/0 2/3 Age: 1998 Type: R305 N 5/0 2/3 Counter: 114 mio. impression Max. format: 530 x 740 mm Min. format: 260 x 400 mm Sheet thickness: 0.04 – 0.6 mm Performance: 15,000 sheets/hour Equipment: 5 color offset printing machine Perfector 5/0 2/3 Full automatic stacking correction in Feeder Pneumatic sidelays in Feeder Electric and Photoelectric double sheet control Missing sheet sensor CPL (Cocking Plate Loading) RCI (Remote Controlled Inking) CCI (Computer Controlled Inking) Blanket washing device Rolandmatic dampening Weko T77c Powder

Reference Num.: 3021 Brand: MAN Roland Type: Ultra RZU 4 Construction year: 1967 Size: 780 x 1,120 mm Available: directly Status: Not in production Location: Deutschland Sheet size: min 475 x 525 mm, max 780 x 1,120 mm Printing speed: max 7,800 sheets/hour Printing units: 2 Machine size: Length: 6,915 mm, Width: 4,090 mm, Height: 2,300 mm Total weight: kg 19,200 / lbs 42,329

Cutter Roland CAMM-1 Pro Art.Nr. PS5947 FB 500 euro + 19%

Key data: 3155

Make and Model: Rolls Royce KVSG 18 G4 The engine is from 1994. It had a full rebuild in 2004. Fuel: Natural Gas Capacity: 3155kW Hours: 63,000 HZ: 50 V: 10500 Scope of Supply: Engine, Alternator, Base frame, Acoustic Container, Exhaust Gas Heat Exchanger, Control panel and synchronisation panels. Please note: circuit breaker and transformers are not included. Price: €200,000

Combined Cycle Gas Turbine Power Plant 75 MW/50 Hz – Zero Hours This equipment was delivered in 2017 by an EPC contractor who selected Rolls-Royce and Siemens as main equipment suppliers. This was a greenfield project and therefore delivery contained all equipment needed for 75 MW power plant operation, like fuel gas treatment plant, water treatment plant and complete switchyard with step-up transformers Manufacturing year: 2017 Gas turbine: Rolls-Royce Trent 60, Dry Low Nox Steam turbine: Siemens SST-300 Step up tranfomers: 2 pc Alstrom 11kV to 154 kW Complete switchyard: Siemens 154 kV Nominal output 100%: 60 MW + 15 MW Max efficiency: Single cycle 42 %, combi cycle 54% Heat recovery steam boiler: 30 bar / 300 C Water treatment: Sand and active coal filters + RO Documentation: Complete original in English Delivery: Complete plant equipment from water and gas t ...

Perfectaion: 1/1, High Pile Feeder, High Pile Delivery, Standard Dampening, Powder Spray

Serial No. 117, Standard Dampening

sheet width: 1050 mm plate thickness: 3,3 mm pre-bending: 3 volt: 400 V frequency: 50 Hz 0: 90 mm min. dia.: 130 mm total power requirement: 1,1 kW weight of the machine ca.: 490 kg dimensions of the machine ca.: 1650x1200x700 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mm plate thickness: 4.5 mm pre-bending: 4.0 volt: 400 V frequency range: 50 Hz min. dia.: 210 mm 0: 140 mm total power requirement: 2.2 kW weight of the machine ca.: 1565 kg dimensions of the machine ca.: 3240x1200x900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roland 306+LVT SNo.26994 B Year:1997 Max Size 59 x74 6 col+ lak with raster roller RCI consol Autoplate Rolandmatic Tehnotrans Grafix puder All new rollers Available: immediately Condition: very good

ROLAND EDELMANN FORM ALL PACK PRINT -Year 1988, one colour variable size Printing machine -Printing cassettes available : 8”- 11 2/3”- 12” -Rolandmatic S dampening system -Available immediately, complete with plate punch and all tools

sheet width: 1256 mm plate thickness: 3 mm pre-bending: 2,5 frequency: 50 Hz volt: 400 V 0: 90 mm min. dia.: 130 mm total power requirement: 1.1 kW weight of the machine ca.: 545 kg dimensions of the machine ca.: 1.1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Etiquetadora Rollmatic 8500/h Self-adhesive rotary labeling machine PE LABELLERS Description Rotary roller feed labeling machine suitable for the application of wrapping labels from the reel. SHEET - Type: rotary labeling machine. - Application: label fed by plastic roll with hot melt glue. - Possible hot-melt combination + cold glue and / or self-adhesive on the same labeller. - Suitable for handling cylindrical and shaped containers (rectangular, square, oval, etc.), even empty. - Production 8,500 bottles / hour. Labeling Measures Width 3400 mm Height 2300 mm Length 3000 mm Measures Heat tunnel Width 1300 mm Height 2300 mm Length 5000 mm Features Model: ROLLMATIC Year: 2005 Width: 3400 mm Height: 3400 mm Large: 3000 mm

YEAR 2010 1. TAI-1300C - LIFTING UNWINDER Product Width: 100-1250mm Diameter of roll max 1000mm Edge Position Control System (E.P.C) Auto Tension Control System 2. TA-1300DTC-2 - DRAW-TAPE FEEDING SYSTEM Tape Thickness: 0.015-0.02mm (HDPE) Draw-Tape Width: 80-100mm Max. O. D. of Draw-Tape: 650mm 3. TA-S-1250 - SHUTTLE TRACK SEALING & PERFORATING UNIT Max. Bag Length: 1200mm (Max. Sealing Width) Bag Width: 140-2000mm Film Thickness: 0.01-0.08mm (LLDPE, Single Layer) 0.008-0.025mm (HDPE, Single Layer) Speed 100 m/min 4. TAF-1700 - TRIANGLE FOLDING UNIT 5. TAD-450 - FOUR SHAFT SPINDLING WINDER Coreless Production Width: 100-380 mm One of the Machines is upgraded to new model Servo driven punching device and hot air sealing system for draw tape sealing unit.

Roland 306 NL+L IMPR 145 MIO, - year 2001- size 59x74- printing 6/0- CIP3/4- x-rite easy tax system from 2015-Tresu lack-Mabeg-Technotrans Beta.d-Grafix Hitronic 3000-IR dryer

Roller conveyor length: 2900 mm Wheel width: 700 mm table height: 700 mm Roller conveyor width: 900 mm roll diameter: 140 mm : kg fence: 450 mm 0: kW range L-W-H: 3,0x0,9x1,3 m weight: 0,7 t Length: 3000mm, width: 600mm, height approx. 750 mm, 3500x1200x8500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roller conveyor length: 3600 mm Wheel width: 700 mm table height: 700 mm Roller conveyor width: 900 mm roll diameter: 140 mm : kg fence: 450 mm 0: kW range L-W-H: 3,7x0,9x1,3 m weight: 0,7 t Length: 3000mm, width: 600mm, height approx. 750 mm, 3500x1200x8500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine manufacturer: ROLL O MATIC Machine model: DELTA 1100 Year of manufacturing: 2016 Materials: HDPE – LDPE - BIO Condition: in production Working hours: 812 Hours Complete line: YES Machine dimension: (length 17.5m /width 3.5m /height (2.5m to 3.3m) Welding width: 900 (3 X 300) Plastic type bag: T-shirt bag / bottom seal bag Final positioning of the bags: roll Bag length: Max: 3000mm; Min: 250mm Bag width: Max: 3X250mm; Min: - mm Film thickness: Max:60 microns; Min: 8 microns Bottom gusseting: No Side gusseting: Yes Depth: 150mm Output: Cycles/minute: 300 Production: Meters/min: 160 Unwinder: Type:Width + motorized shaft Mother roll width: 1700 Mm Unwind shaft: Number: X 1 ; Type: Pneumatic Mother roll diameter: 800 mm Web guide: Yes Sealer/Longitudinal: Yes Number lanes: 3 Photoelectric cell control: YES Sealing bar: Bottom Drive: Servo Control p ...

Transport trolley, platform trolley, transport trolley, heavy duty trolley, table trolley, assembly trolley, chassis with 2 angle frames -Manufacturer: Rollcart, table trolley type 08-7424 -Load capacity: 300 kg -Chassis: 2 swivel castors with brakes, 2 fixed castors -Dimension: 1160/600/H825 mm -Weight: 26 kg

Description: Concrete mixing bucket, 250 litres, standardd connection, pressure 215 bar, flow rate 90lt/min, automatic material unloading Approx. Onsite Dimension. (l x w x h): 1,500 x 900 x 700 mm, weight approx.: 370 kg

Description: Concrete mixing bucket, 250 litres, standardd connection, pressure 215 bar, flow rate 90lt/min, automatic material unloading Approx. Onsite Dimension. (l x w x h): 1,500 x 900 x 700 mm, weight approx.: 370 kg

Description: Concrete mixing bucket, 250 litres, standardd connection, pressure 215 bar, flow rate 90lt/min, automatic material unloading Approx. Onsite Dimension. (l x w x h): 1,500 x 900 x 700 mm, weight approx.: 370 kg

Description: Concrete mixing bucket, 250 litres, standardd connection, pressure 215 bar, flow rate 90lt/min, automatic material unloading Approx. Onsite Dimension. (l x w x h): 1,500 x 900 x 700 mm, weight approx.: 370 kg

Description: Concrete mixing bucket, 250 litres, standardd connection, pressure 215 bar, flow rate 90lt/min, automatic material unloading Approx. Onsite Dimension. (l x w x h): 1,500 x 900 x 700 mm, weight approx.: 370 kg

Description: Size 1500 x 750 x 500 mm, fork hole size 130 x 52 mm, metal structure Approx. Onsite Dimension. (l x w x h): 1,500 x 750 x 500 mm, weight approx.: 100 kg