rohrssen used for sale

TECHNICAL DATA: Manufacturer: ROHR Bagger GmbH Type: HDH 236 Year of construction: 2001 Drive power: 187.5 kW Weight: 2,500 kg SPECIFIC COMMENT - Spur gear adjustable on both sides (left/right) - General overhaul 2012, since the reserve gearbox - Incl. new on-board disc and multi-wedge shaft (overhaul 2011) TECHNICAL SPECIFICATIONS Manufacturer: ROHR Bagger GmbH Type: HDH 236 Year of manufacturing: 2001 Drive Power: 187.5 kW Weight: 2,500 kg SPECIFIC COMMENT: - Spur gear adjustable on both sides (left/right). - General overhaul 2012, sinve then reserve - Incl. new flanged pulley and splined shaft (overhaul 2011)

TECHNICAL SPECIFICATIONS Manufacturer: ROHR Designation: Floating grab system Design: Catamaran construction, floating Type: RS 8.2 - 230 PK Year of Make: 1981 Gripper capacity: 8 cbm Grab weight: approx. 10.5 t Excavator depth: 60 m Hoist winch motors: 2 x 175 kW Lifting gear: 2 pcs. Fabr. DEMAG, type HDH 236 Number of mooring winches: 4 pcs. Pontoon dimensions: - Length: 22,000 mm - Width: 24,000 mm - Height: 2,000 mm - Draught: 1,400 mm SPECIFIC COMMENT - Fully functional mining equipment - If required, an associated folding barge (100 cbm) can be offered - Incl. 1 spare engine Mannesmann-Demag 175 kW Available from December 2024 / early 2025

TECHNICAL SPECIFICATIONS Manufacturer: ROHR Bagger GmbH Description: Bucket chain excavator Type: Floating Type: KS 250 Year of Make: 2007 Bucket capacity: 250 lit. Conveying capacity: approx. 800 t/h (depending on the material) Bucket Shakes Adjustable: 8 to 34/min Bucket ladder length: approx. 37.0 m Dredging depth: approx. 16.0 m under water Bucket chain drive: 2 x 90 kW Bar grate gap width: 200 mm (pre-screening) Number of crosswinds: 4 pcs. Number of advance winches: 1 pc. Drive power bucket ladder winch: 37 kW Ladder lifting speed: 2.20 m/min Drive Type: Electric Operating voltage: 3/400/230V/NPE, 50 Hz Control voltage: 230 VAC, 24 VDC Power supply: Medium voltage 10 kV to rated voltage 400V Cast resin transformer Rated power: 630 kVA Total installed power (drives): approx. 291 kW Control: SIEMENS type SIMATIC S7- 300 Excavator discharge belt: AA = 11.0 ...

Stainless steel tank, stainless steel tank used Manufacturer: E.S. Planungs-u. Rohrbau GmbH Year of construction: 1994 Volume approx. 9 m³ External dimensions : approx. 2.4 x 2.6 x 1.9 m Changes and errors in the technical data, information and prices as well as prior sale reserved.

Laser, barcode scanner, position scanner -Manufacturer: RoHS -Type: USB/KBW/RS232 -Quantity: 1x scanner available -Dimensions: 235/115/H65 mm -Weight: 0.26 kg

Manufacturer: Rohb Model: RKA86 Year of Manufacture: 2007 Find more here - / Contact us at -

TECHNICAL SPECIFICATIONS Manufacturer: ROHR Designation: Floating grab system Type: 5.5 Year: unknown (80s) Gripper capacity: 5.5 cbm Hoist: 2 x 120 kW Gearbox Type: HD 236 (Mannesmann Demag) Screening machine: Främbs&Freudenberg ECK 1500/5000/1 SPECIFIC COMMENT - In need of repair and overhaul! - Incl. MRS gripper 5.5 cbm - Incl. cat with hoist - Pontoons dry

A precision circular saw Rohbi is available. Solid material cutting range: 50mm, tube and profile cutting range: 50-60mm, max. saw blade diameter: 225mm, bore: 20mm, speed: 1400rpm, max. feed length: 600mm, max. cutting length: 160mm. Machine dimensions X/Y/Z: approx. 1700mm/850mm/1600mm, weight: approx. 400kg. An on-site inspection is possible.

A Rohde chamber kiln is available. Volume: 600l, max. temperature: 1000°C, internal dimensions X/Y/Z: 710mm/870mm/920mm, power: 40kW, insulation layers: 2, heating directions: 4, heating element: grooved refractory brick. Machine dimensions X/Y/Z: approx. 1100mm/1500mm/2300mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible.

transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: Rohde, transformer autotransformer type SPAR YNAO -Power: 300 kVA -Voltage: Pri. 440V/sec. 380V/60Hz -Technical data: see photo type plate -Dimensions: 1000/570/H760 mm -Weight: 388 kg

Year of construction: 1992-2007 PLC: Siemens S7 Blade 60-250 mm Power 1,5 KW Saw blade feed 0-20 mm / min Cutting speed: 30-170 m / min (steel) 800 - 2400 m/min (non-ferrous metals) Workspace square Max: 50 mm Work area round: 5-70 mm Supply length 5-1000 mm 5-9999 (multiple stroke) Nachschubgeschw. Max 500 mm / sec (Saw) approximate weight: 1500 kg (Magazine), approx.: 800 kg (optional) Dimensions Lxwxh (saw) about: 2500 x 1000 x 2000mm (Magazine) about: 6500mm x 1500mm x 1300mm (optional) Footprint Lxw 2500 mm x 1000 mm The machine will be overhauled on request in our House. Among other things, following points are renewed: -Conversion to Siemens S7 PLC control -Conversion on Siemens HMI Control Panel -Replacement of pneumatic feed or replacement of ball screws -Replacement of servo motor and servo inverters -Replace the inverter for the main drive of the saw - ...

Refurbished: 2018 Year of construction: 1993-2000 PLC: Siemens S7 Blade 175-250 mm Power 1,5 KW Saw blade feed mm/min Cutting speed: 20-170 m / min (at option high speed spindle differierend) Workspace square Max: 60 mm Flat maximum work area: 40 x 80 mm Work area round: 2-70 mm Supply length 5-2000 mm Nachschubgeschw. 600 mm / sec (Saw) approximate weight: 1200 kg (Magazine), approx.: 600 kg Dimensions Lxwxh (saw) about: 3300 mm x 1000 mm x 2000mm (Magazine) about: 3900mm x 1500mm x 1300mm Footprint Lxw 4900 mm x 2000 mm The machine will be overhauled on request in our House. Among other things, following points are renewed: -Conversion to Siemens S7 -New electric components -New pneumatic lines -Ueberholte pneumatic components -New valve Terminal -Revision of the extraction -Minimum lubrication system overhaul -Replacing common wear parts -Overhaul of the lo ...

Load: 2.5 T

Maximum temperature: 1290 °C Interior dimensions: 630 x 530 x 760 mm electr. Connection: 400 V kW Space requirement: 1200 x 870 x 1810 mm Weight: 470 kg Heating capacity: 16.5 kW

material: Stahl Dimensions (L/W/H): verschieden mm Steel in various dimensions:Example dimensions:250x80x6000 140x120 200x180 330x79x6000 200x200 200x140 approx: 200 to 250 t available The technical data are manufacturer or operator specifications and are therefore not binding for us. We reserve the right to prior sale, only our business and sales conditions apply.about usmore than 400 own machines in stockover 12,000 m² storage area, crane capacity 70 tmore than 1000 articles accessories for your workshopYou want to sell machines production lines or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Eylets punchining machine. In production ready condition. With extra repromaterial.

diamter spiral cutter: 70 - 250 mm spiral lenght: 20.000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 250 mm cutting diameter: 70 mm tiltable up to: 45 Grad dimensions of the machine ca.: 3.5 x 0.6 x 1.8 m weight of the machine ca.: 300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

temperature max.: ° muffle size (length): 0 muffle size (width): 0 muffle size (depth): mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Circular sawing machine. Raw bitsun, unfortunately no technical data.

ROHDE & SCHWARZ - CMS 54 RADIOCOMMUNICATION SERVICE MONITOR 0.4...1000MHz Base station simulation for cellular mobile phone testing, e.g. call establishment, call termination, channel and power change Auction-ID: A1-47049-88

ROHDE & SCHWARZ - FSEM SPECTRUM ANALYZER 20Hz... 26.5GHz Spectrum Analyzer Auction-ID: A1-47049-91

ROHDE & SCHWARZ - CMU200 UNIVERSAL RADIO COMMUNICATION TESTER - SN 101397 - (does not boot) Radio bench for universal digital communications, Auction-ID: A1-47049-177

ROHDE & SCHWARZ - ZV-Z270 CALIBRATION KIT N(50) Network Analyzer Calibration Kits - Designed for highly accurate and versatile VNA calibration Auction-ID: A1-47049-92

ROHDE & SCHWARZ - CMW 500 1201.0002K50 - (HDD no longer works) Wireless device production testing: A major breakthrough in scalability, measurement accuracy, and speed. New generation of WiMAX wireless device test equipment. Auction-ID: A1-47049-90

ROHDE & SCHWARZ - CMW 500 Wireless device production testing: A major breakthrough in scalability, measurement accuracy, and speed. New Generation of WiMAX Wireless Device Test Equipment Auction-ID: A1-47049-89

ROHDE & SCHWARZ - CMU200 UNIVERSAL RADIO COMMUNICATION TESTER - SN 835733-018 - (does not boot) Radio bench for universal digital communications, Auction-ID: A1-47049-179

ROHDE & SCHWARZ - TCE900 Transmitter Control Exciter With ERST.2 Transmitter Control Exciter Auction-ID: A1-47049-203

ROHDE & SCHWARZ - CMU200 UNIVERSAL RADIO COMMUNICATION TESTER - SN 103979 Radio bench for universal digital communications, Auction-ID: A1-47049-178

ROHDE & SCHWARZ - Model 06 Spectrum Rider FPH Portable spectrum analyzer. Compact size to handle complex tasks Auction-ID: A1-47049-202

Pre-filter, intake air filter, air filter housing, air filter housing, generator air filter, adapter tube, pipe bend -Manufacturer: Mann, elbow 90° Ø 150 mm -Total dimensions: 360/220/H155 mm -Number: 8x sheets available -Price per piece -Weight: 1.5 kg

Pipe coupling, pressure coupling, quick coupling, fire brigade coupling, Storz coupling, hose coupling -Manufacturer: Schott, quick coupling type PVR 12/90 to Ø 150 mm -Coupling: size C-DIN 14 302 -Dimensions: Ø160 x 330 mm -Weight: 1.6 kg

Specifications Manufacturer: WAFIOS Model / Type: BMZ 42 Machine Number (SN): 27681075 Year of manufacture: 2015 Plan number: 7681 2 9000 75 Power supply: 3~400V Frequency: 50Hz DC Control Voltage: 24V DC AC Voltage: 230V AC Rated Current: 11A Protection: 25 A Equipment Pipe feeder Buffer Unit Workpiece Reception System Pipe Rotation Unit Bending module Workpiece Placement System Output tape Mesh Fence Light barrier system Separate operator terminal Monitor and remote control Workshop cabinet with sliding door Workshop trolley with 5 drawers Hand tools and additional equipment included Pipe diameter: max. 12.7 × 1.5 mm with a tensile strength of max. 600 N/mm² Rod Length: 150-2000 mm Bending head stroke (Z axis): up max. 25 mm down max. 120 mm

Including: drill vise with jaw width 110 mm and opening 120 mm/ including: 2 pressure gauges vice and transport trolley Auction-ID: A1-46698-311

Power cables, solar cables, fiber optic cables, fiber optic cables, data cables, LAN cables -Manufacturer: Lapp Kabel, Unitronic data cable -Type: Unitronic LiYCY 8x2x0.5 ROHS -Length: 75 m -Price: complete -Dimensions roll: Ø 700 x 490 mm -Weight: 36 kg

Manufacturer: Abdunstwand , Type: Rippert mit Rohrventilator, Channel width in mm: 3200 mit Rippe und 1000 ohne, Channel height in mm: 2000,

Manufacturer: Mekanika, Type: Apstapler Rohholz, Control: Omron, Work piece width min-max mm: 40-1300, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-60, Vacuum feeding: yes, Crosswise feeding: yes, Stacking pattern, single-row: mehrreihig, Number of stacks: 2 Stapleplätze, Cycles approx.: 5, Number of sucking lines: Unigripper, Removal of protective boards: no, Feeding speed continous adjustable: yes, Feeding by cross conveyor: yes, machine ready for demonstration: yes, FREE TEXT: Platzbedarf ca.10 m X 7 m/Auflegestationen 5000 mm und 7500 mm,

Bucket chain excavator KS 160, manufacturer ROHR Type: floating bucket chain dredger Bucket ladder length: 28 m Excavator depth: 15 m Bucket capacity: has been increased to 175 L Bucket Bulk: 8-32/min Theoretical flow rate: 76-307 m³/h Drive: converted to electric

Power cable, solar cable, fiber optic cable, fiber optic line, data cable, LAN cable, fiber optic cable, data line, video cable -Manufacturer: Lapp Kabel, data line on cable drum -Type: UNITRONIC Li2YCY PiMF 5x2x0.5 ROHS -Cable drum: schill IT 380.RM -Cable length: 97 m -Number: 7x cable drums available -Price per piece -Dimension: 410/260/H450 mm -Weight: 21 kg/pc.

Extruder 70 mm - 24 L/D with pipe head up to 63 mm, calibration tank 6000 mm Caterpillar extractor, saw

Ladies and gentlemen, we are pleased to offer larger quantities of sugar for sale. If you are interested in our offer, please contact us. Yours sincerely Trade & Translations

Tube bundle heat exchangers Manufacturer: Orsymonde France Type: Tube bundle Year of construction: 2000 Serial number: 1.00.098 Carrier: Medium: Water Material: 1.4404 (V4A) Operating pressure: 3 bar Temperature: ambient temperature Test pressure: 6 bar Coat: Medium: Gas Material: 1.4404 (V4A) Operating pressure: 0.5 bar Temperature: ambient temperature Test pressure: 1 bar Dimensions: Length: 2.070 mm Width: 1.070 mm In very good condition!

Through annealing furnace PADELTTHERM Type: Raw 50 X 15 X 150 - E Circuit diagram no.: 6 - 16-4 BP Order No.: 9070/4 Year of construction: 2000 Rated voltage 400 ~ V Control voltage 230 V Nominal power 32 KW Protection class IP 54 Nominal current 58 amp. maximum temperature of 1050° C Weight 2250 kg very little in a University used.; good condition, like new

number: 1 weight: 2,57 kg width: 265 mm height: 250 mm clamping force max.: 3 kN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.