rods used for sale

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Refurbished Pharmapaktor APC L200/50. The Hosokawa Alpine APC L200/50 Pharmapaktor is the perfect compactor to test the product behaviour with this technology, while it even allows to keep a continuous production at small scale if needed. The Pharmapaktor can be fitted with a flake crusher to granulate the resulting compacted material increasing the possibilities of end produc ...

Approx. 200 pcs. rear wall grille Used goods, good condition, see pictures Length 200 cm Width 110 cm Height 3 cm Mesh 10 x 5 cm galvanized Negotiable price: € 29,-- per piece net from stock Numerous gratings with different mesh sizes and support rods available! Goods are in stock. Transport and assembly possible on request. Viewing is possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock) Purchase / Sale We are constantly looking for or offering numerous articles from a wide variety of areas broom-clean company clearances Closures Fast, flexible, quick-witted! We also clear a ...

Heating elements / heating rods NEW( 4 pieces )for quail piccoloPower: 320 WSeating: 230 Vgestr. Length: 1540 mmof which unheated: 2 x 175 mmPipe diameter: 8.5 mmPipe sheath material: 1.4571 / AISI 316 TiConnection: M4 threadClosure: siliconeMarking: green insulating beadsRHK curved: U-shape, center-center 45 mmin stainless steel sheet 95x25x3 mm soldered in 

width of the strips: 100 mm band length: 920 mm engine output: 0,35 kW saw band speed: 7 m/sec. Table surface: 300 x 150 mm roll diameter: 58 mm dimensions: 460 x 400 x 210 mm voltage: 380 V weight of the machine ca.: 15 kg Equipment: - Table model - 1 grinding belt - Steel grinding table with planed surface - Belt alignment via two Threaded rods with star grip The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1180 °C

AMP VBF-60/60/100-1.5 horizontal vacuum furnace was manufactured in Poland in 2012. The machine, which has a horizontal construction with a large cylindrical heating chamber, is designed for, among others, annealing, degassing, brazing and hardening of long workpieces with a maximum weight of 600 kg, without the risk of deformation. The AMP vacuum furnace ensures that a constant temperature of 1180°C is maintained throughout the treatment, due to the insulation inside the heating chamber in the form of a graphite mat fixed to the chamber casing by molybdenum rods with graphite composite pads. The capacious heating chamber also contains heating elements, charge holding supports and cooling nozzles through which cooling gas flows during the cooling cycle. All parameters, such as vacuum, temperature course and cooling gas pressure, are programmed in a special controller, installed in a  ...

We have 8 pieces of L32 cylinder heads in our stock in Istanbul Nearly brand new condition with very low working hours crack tested and water pressure tested free of cracks or welding We also have pistons , liners , con rods, fuel pumps and more ... please contact us at: info@fin-marine for more information

Complete solution for the transport of bulk materials and demetalization of magnetic metal impurities. Aluminium riser conveyor belt incl. substructure Slope beginning area level ground (adjustable) Discharge height 1800mm (adjustable) Construction: height-adjustable Construction for suspension of the DMPM1200 overbelt magnetic separator included Conveyor belt width 500mm (adjustable) We supply our conveyor belts in PVC, PU or rubber. PVC conveyor belt incl. carrier and shaft edge Drive: Motor 0.25KW ( adjustable ), speed 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Shaft edge: 40x35mm T-20 tunnels - 400mm pitch 2-layer particularly transversely stable Our core competence lies in providing the customer with exactly what he really needs. Together with our c ...

Roell Amsler 50 DSM 6100-F Creep Testing Machine 50 kN Roell Amsler 50 DSM 6100-F Endurance Testing Machine Principle: A creep test is the strength test under static stress and constant temperature. The plastic deformation of the sample is measured. In addition to tests on solid test rods, the cracking behavior under compressive stress can also be determined on foams (e.g. core materials for laminated composites). Application: Long-term behavior under load of plastics and metals at constant elevated temperature. Measuring range: Force range: 0.5kN - 50kN Strain transducer measuring range: 10 mm Temperature range: up to 500 degrees Sample Requirement: Round specimen: 14.7 x 180 mm Flat sample or cuboid: max. 50 x 50 x50 mm More items - new and used - can be found in our shop! International shipping costs on request!

band width: 200 mm band length: 1490 mm table-size: 540 x 280 mm engine output: 1,1 kW voltage: 400 V weight of the machine ca.: 72 kg dimensions: 750 x 600 x 320 mm Equipment: - with 2 belt speeds - Table model - 1 grinding belt - Steel sanding table with planed surface - Belt alignment via two threaded rods with star grip The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Face plate, face plate chuck, four-jaw chuck -Transfer in current condition as seen -Jaws and threaded rods: missing -Chuck size: Ø 355 mm -Weight: 15 kg

Trimming saw Wurster & Dietz Type: FR 7 Passage width 800 mm Cutting height 160 mm with saw blade diameter 500 mm Cutting height 140 mm with saw blade diameter 450 mm Cutting height 120 mm with saw blade diameter 300 mm Motor 22 kW Adjustable slatted bushing Hydraulic feed 0 – 70 m/min. Hydraulic roller lifting Input roller conveyor 6 meters long with 6 rollers, with rods for adjustment of cutting height and speed and batten bushing Output roller conveyor 6.5 m long with push-off in the form of spiral rolls for side goods new spare drive belt complete with operating instructions and wiring diagram Condition: Technically perfect, cleaned and repainted Total weight approx. 5 to. (Trimming saw 3 tons. and roller conveyors and rest 2 tons.) Installation length approx. 15.5 m Loading dimensions: approx. 6.5 loading meters

Aluminium angle conveyor belt with substructure Conveyor belt length: 1000mm flat + 2400mm rising Slope angle in kink 45°C Discharge height: approx. 2000mm Height of the horizontal 300mm top edge PPU conveyor belt FDA Food compliant Conveyor belt EM 15/2 0+17 PU blue 7 white Belt width 400mm T20 stud welded - pitch 202mm antistatic due to threads in the fabric of the running side endlessly welded with stepped finger connection 30mm shaft edge high on both sides high frequency welded Edge-free zone on both sides for belt guidance in the slope Transverse arrangement -70/+35/-5/+190/-5/+30/-70mm Full-surface underlay sheet Drive: Motor approx. 0.25KW Belt speed approx. 0.3m/sec Connection 220/400V, 50Hz protection class IP54 Our core competence lies in providing the customer with exactly what he really needs. Together with our customers, we develop customer-speci ...

Deburring pipes, rods, profiles and sheets after separation is a must. But only the right system enables cost-effective, safe and flawless deburring – namely the optimal adaptation of the machine concept and the high-performance brush to the workpiece properties and material quality.

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic, CNC – controlled double-sided pre-bending – conical bending device Roll diameter 350 mm Smallest weft diameter 1.1 x the roll diameter = 385 mm Maximum bending length 3,000 mm Nominal pre-bending performance over the entire bending length at 5 x D = 18 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 22 mm sheet steel/ST40 Drive power 22 kW Weight 13,500 kg. Three hydraulically driven rollers (one hydraulic motor per roller) - The rollers run in bronze plain bearings Hydraulic linear sub-roller adjustment Hard chrome-plated piston rods Hardened and ground rollers PILZ® Laser Validation BECKHOFF® CNC – Control with Ethernet technology and large touch screen DANFOSS® Precision Hydraul ...

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic, CNC – controlled double-sided pre-bending – conical bending device Roll diameter 350 mm Smallest weft diameter 1.1 x the roll diameter = 385 mm Maximum bending length 3,000 mm Nominal pre-bending performance over the entire bending length at 5 x D = 18 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 22 mm sheet steel/ST40 Drive power 22 kW Weight 13,500 kg. Three hydraulically driven rollers (one hydraulic motor per roller) - The rollers run in bronze plain bearings Hydraulic linear sub-roller adjustment Hard chrome-plated piston rods Hardened and ground rollers PILZ® Laser Validation BECKHOFF® CNC – Control with Ethernet technology and large touch screen DANFOSS® Precision Hydraul ...

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic, CNC – controlled double-sided pre-bending – conical bending device Roll diameter 350 mm Smallest weft diameter 1.1 x the roll diameter = 385 mm Maximum bending length 3,000 mm Nominal pre-bending performance over the entire bending length at 5 x D = 18 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 22 mm sheet steel/ST40 Drive power 22 kW Weight 13,500 kg. Three hydraulically driven rollers (one hydraulic motor per roller) - The rollers run in bronze plain bearings Hydraulic linear sub-roller adjustment Hard chrome-plated piston rods Hardened and ground rollers PILZ® Laser Validation BECKHOFF® CNC – Control with Ethernet technology and large touch screen DANFOSS® Precision Hydraul ...

Letterpress printing machine Bautzner Industriewerk, machine number 4868. Rolling rods, however, the rollers must be re-upholstered. Can be done by us for an extra charge. In good condition, immediately available. If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

MAN B&W 58/64 CYLINDER HEADS , OVERHAULED READY TO INSTALL PISTONS, FUEL PUMPS, CONNECTING RODS, CYLINDER LINERS AVAILABLE. TC ( NA48 SM1013)

Immediately available used connecting rods.

Immediately available used connecting rods

An indestructible machine for the toughest conditions. The machine is suitable for processing raw wood. The machine has no inclination. The saw blade is located directly on the motor. Technical parameters: Maximum saw blade diameter: ø 500/mm Power of the main motor: 5.5 kW Main speed of the saw blade: 2850 rpm Maximum cutting height: 85 mm (with 350 mm saw blade) Inclination of the saw unit: NO Dimensions of the iron table: 1050 × 600 mm Aluminium formatting table: 2000 × 360 mm / OPTION 3200 x 360 mm Formatting table for hardened rods (Altendorf principle) Cutting length: 2000 mm Weight of the machine: 450 kg Given the prices of new Chinese machines that cannot withstand the harsh conditions, this machine is the solution. Made in Slovakia in Europe

Immediately available used connecting rod rods

Labeller for disposable syringes Manufacturer Bausch & Strobel Type SME 6005 This machine allows the insertion of labels (self-adhesive labels), as well as piston rods in disposable syringes. Capacity 6000 syringes/h Volume of syringes 0.5 to 10 ml Diameter of the syringes 7 to 17 mm Label dispenser LAETUS Control Camera

The NEW CNC grinding VERECO RG 700/8500 is designed for the batch production of bench pins and connecting rod pins of crankshafts in a fully automatic cycle, or, for the production of individual parts in manual. It operates by means of a mobile grinding wheel unit both on the X axis and on the Z axis: this allows the grinding of different diameters in a single positioning of the piece. MAIN TECHNICAL FEATURES: Distance between tips: 8500 mm Drill height: 800 mm Maximum rotating Ø: 1600 mm Maximum weight of the balance piece: 10,000 kg Maximum grinding wheel dimensions (with recesses): 1600x900x160 mm Approximate machine weight: 98.000 kg NB: The aforementioned technical data, collected from the technical data sheet of the manufacturer, are to be considered non-binding and subject to change without notice. NUMERICAL CONTROL The Siemens 840 D electronic numerical contro ...

Key data: 300

JENBACHER 208 300 kW Generator Set. The J208 engine is in excellent condition. The previous owning company completely rebuilt the engine for a project that was canceled when the company closed and went into liquidation. The engine can operate with Natural Gas, LPG and Syngas as it is. Year: 1994 Hours: 60.000 Capacity: 300 kW Hz: 50 Voltage: 400V Scope of supply: engine, alternator. - CONTROL SYSTEM NOT AVAILABLE - We have verified the authenticity of the engine rebuild through an on-site inspection. An endoscopic examination indicates that the pistons, cylinder liners, con rods, and bearings have been replaced and are new. There is no sign of wear or previous combustion in the cylinders. The alternator's bearings have been replaced too. The endoscopic photos show that the turbo has also been replaced, and the intercooler grille is new. An external check reveals  ...

LONG PASTA LINE 350 KG./ HOUR - Continuous automatic line for the production of used and totally overhauled as new Long Pasta. Production capacity +/- 350 Kg./h. reference to spaghetti with a diameter of 1.7mm. Consisting of: N. 1 Press Mod. Braibanti type Mabra 1R N. 1 Spreader for rods from Mt. 1,64 Mod. Stedo UNI 164 N. 1 VAT type registration from Mt.8 N. 1 Dryer Mod.Braibanti type LPG 4PV + 1R Storage silos with 6 floors of 11Mt. IPAC type automatic extractor Packaging Line. The line was tested then the pasta factory closed so the electrical and plumbing systems are new and recoverable.

Key data: 1500 , 400

JENBACHER JMS420GS-B.L Biogas Generator Set Model: JMS420GS-B.L Fuel: Biogas Year: 2012 Hours: 60,500 Capacity: 1500 kW HZ: 50 Voltage: 400 V Scope of supply: Complete generator set including Engine, Alternator, Frame, Control system (XT3 control), Gas line, Heat exchanger and other accessories. Service History Status: Rebuild in April/May 2022, cost €160,000. Replaced: piston lining, heads, and everything else common to rebuild. Not replaced: pistons, connecting rods, still within good range. Available for Sale Now. Price: €140,000

Hello all We have 8 X Wartsila 12V32 LN engines available Year of build is 2007 In very good condition Also all major parts are available such as: Pistons, Liners, Cylinder heads, Con rods, Crank shaft Please contact us at : info@fin-marine for more info

SKL 29/24 CYLINDER HEADS, COMPLETE WITH ALL FITTINGS PISTONS, CYLINDER LINERS, CONNECTING RODS, FUEL PUMPS, WATER PUMPS 1 PC 6 CYL. CRANKSHAFT & 1 PC 8 CYL. CRANKSHAFT / STD SIZE.

2 PCS WICHMANN 9 AXAG CRANKSHAFTS CYLINDER LINERS, PISTONS, CONNECTING RODS, CYLINDER HEADS, BLOWERS, T/Cs MANY PARTS AVAILABLE WITH US FOR WICHMANN AXA & AXAG SERIES

We offer a Dokaset position, used - ready for immediate use. Special net price: 9500€ + VAT Pcs. Designation 4 Dokaset element 2.70x2.70m 4 Dokaset element 2.70x2.70m with stage 2 Dokaset element 1.35x2.70m 2 Dokaset element 1.35x2.70m with stage 10 Dokaset tie rods 10-30cm 5 Dokaset Head Anchors 12-36cm 18 Dokaset anchor hole reduction 20.0 5 Dokaset railing brackets 15 degrees Sales on behalf of customers If you have any questions, please contact Mr. Schaal at 007153-41233 purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Master Craftsman Company Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ Warehouse Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Ulm Registry  ...

MaK 6M552C STD SIZE CRANKSHAFT CYLINDER HEADS, CONNECTING RODS, PISTONS AVAILABLE

roll diameter: 500 mm roll length: 1500 mm rolls drilled: Kernbohrung Nip adjustment: hydraulisch 0 total power requirement: 110 kW Condition: used, overhauled Specification: rolling mill 500 x 1500 mm - used - roll diameter: 500 mm - roll length: 1500 mm - monoblock - motor under the rolls - fixed friction between the rolls - Rolls: with core bore, with central chamber for water cooling - Gap adjustments: NEW hydraulic - Hydraulic unit: NEW - tiltable material guide jaws made of steel - Rollers: mounted on bronze bushes with oil circulation lubrication via pump - new ball bearing slewing rings for connection to water circuit - New safety brake for NOT STOP - New AC motor 110 kW - 400 V - 50 Hz - New pan for receiving the mixture - Safety rods bi-directional - New electrical control cabinet with PLC system S7-1200 - New fr ...

Mogensen Stangensizer Type: VX 2058 Dimensions.: 6000 x 1900 mm Version : 5 steps Rods: length 1000 mm, diameter: 40 mm Ø , AA. Distance: 100 mm Stock: 2 pieces

Compact pretzel long roller with croissant winder and feed belt Universe Kasper Model: LWT 3/30 -EB 2 for all rods and pretzel sticks, etc. Universal - Combi Winding Machine for all doughs for wrapping and long rolls Longitudinal width 600 mm for pretzel strands Total efficacy over 2 levels Dough filler from 25 - 180 grams Stainless steel version with step flap with EB2 feeder with centering device and pre-rolling for bread roll lines with transverse discharge DGUV V3 tested with sling table hold flap Connection 400V, 16A-CEE plug Approx. dimensions: 1600 x 700 x 1800 mm, WxDxH Used machine overhauled with 6 months warranty More bakery machines in stock!

Mogensen Stangensizer Type: VX 2558 Dimensions.: 6000 x 2400 mm Version : 5 steps Rods: length 950 mm, diameter: 30 mm Ø , AA. Distance: 36 mm Stock: 2 pieces

Manufacturer: Karl Klink Model: RKW 25-3800-520 Weight: 50t Year of construction: 1990 Machine no.: 3048 & 3047 General / technical data: Chain broaching machine for continuous outdoor clearing Pulling force: 25.000kg Cutting speed: 7.2 / 8.1 / 9.6m/min Maximum tool length: 3520mm Passage width: 520mm Tool carrier clamping surface: 3520 x 460 mm Dimensions: 12.300 x 6.400 x 4650mm Power Supply: 380V 50Hz/110kW Accessories/ Special equipment: - 6 tool carriers for tool change - Machine documentation Remark / General The machines are in good condition. The machines are dismantled with us in the Bearing. The total volume of the plant comprises several trucks (approx. 70 tons per machine). The machines have produced connecting rods for passenger car diesel engines. Chain scrapers are designed for use in mass production. The continuous ( ...

approx. 10 pieces upholstered trolley - used - : Price per piece ex location: 125.-€ (net)! Manufacturer: Cordes Type: Upholstered Cart Year of construction: unknown Rods extendable Length: normal 2,40m with extended poles: 3,20m Height: 1,29m Width: 0,90m Condition: very good Available: as of now Location: Kiel

Manufacturer: Alfing Type: E II special machine Machine No.: 10-02541 Year of construction: 1976 Weight of the plant: approx. 43t General / technical data: Connecting rod stitch size: 400mm- 1.100mm Spindle thickness: depending on tools up to Ø350mm Installation area (l x w x h): approx. 6000 x 10000 x 3000mm Power Supply: 380V / 50Hz / 180kW Remark: ALFING special machine for fine spindling of connecting rod bearing seats for large engines. The machine has a clamping device that can be moved on the middle bed. The processing is done on 2 sides. Station 01 D with laterally movable carriage unit for adjusting the stitch size. The machine has a splash guard for wet machining. On the machine connecting rods of the Type 540 and Type 528 were produced (Deutz engines up to 300 liters displacement and 4000hp) Composed of: – 1 machine bed – 2 sled  ...

150 pieces of stacking racks, or Stuhl_Corletten – used- : Price per piece ex site: 99.-€ (net)! Manufacturer: unknown, but should be Cordes Type: Stacking Rack Side rods can be plugged in Year of manufacture: unknown Type 1: CS-1800.501: Weight: 135 kg Load capacity: 700 kg Load: 1400 kg Stackability: 3-fold With bracket for forklift fork Type 2: CS-1800.000: Weight: 114 kg Load capacity: 700 kg Load: 1400 kg Stackability: 3-fold The following applies to both: Compatible with each other Interior dimensions 180cm x 130cm x 235cm (W/D/H) Sheet metal base 1.5mm thick Colour: Green RAL 6017 synthetic resin lacquer All four sides with 1 piece of removable cross tube connection Pluggable in 3 different heights at 700 / 1350 and 1850 according to upper edge lower part Condition: good Available: now Location: 72379 Hechingen

Horizontal drill rig, with rods on low-loaders and trucks with swivel wall boxes. Tracto Technik GRUNDODRILL 15XP complete train approx. 180m poles DB 2546 L 6x2 MP3, 467.000km Tandem low-loader trailer Complete train from 2009 ! Vehicle may be covered with advertising, labeling and/or labeling residues. Our offer is generally without new HU/AU/SP acceptance. On request, we will be happy to make you an offer from our partner workshops. Errors, typing errors and prior sale excepted. Please do not hesitate to contact us.

Welding machine for joining rods/wires min: 3mm - max: 7mm 380V III; 4Kva - 18kVA DOCUMENTATION AVAILABLE

KÄRCHER ROBO 30 pipe boring machine for pipes, flat material and profiles With this machine, tubes, flat material or profiles can be cut very quickly and accurately in a single pass. can be drilled or milled at an angle or at an angle up to  50° in such a way that filling rods or filling tubes up to 1" can be drilled or milled can be plugged through. With the standard additional clamp for the jaw chuck, you can not only cut pipes, but also transport flat material or other profiles with the feed and at the desired angle up to over Make 50° single-sided holes or through holes. The clamping jaws in the self-centering vice have a recess at the top for flat material. We are unrivalled when it comes to converting to another material! The feed is positioned at 0.1 mm with the counter with absolute or chain gauge. With the ROBO 30, you don't need to set limit switches or cams for ...

ERSA HOTFLOW - 7 Tunnel Dryer / Belt Dryer / Continuous Dryer Type: HOTFLOW – 7 Convection oven as a tunnel dryer / belt dryer / continuous dryer for drying plate materials on the top and bottom. 4 heating zones at the top, 4 heating zones at the bottom, for drying on both sides. Rolling rods at a distance of approx. 4.5 cm on 2 transport chains as a support for plates Temperature range from 20° to 300°C Nominal power Pn = 72 KW Nominal current In = 106 A Voltage: 3 x 400 / 230V Back-up fuse: 3 x 125 A Frequency 50 Hz Power 67 KW Year of construction 2000 Dimensions: Length: 5250 mm Width: 1300 mm Height: 1750 mm (incl. warning light) Height: 1450 mm (Without warning light) Dry section: Length of heating zones: 3300 mm Transport width: 500 mm For possible use as a soldering oven – soldering machine – reflow oven, a cooling zone must be set up.  ...

Battery Interchangeable Rack, Transport Rack, Storage Rack for Forklift Battery Changing table, Battery pallet, Battery change system, Battery exchange trolley Manufacturer: WELUX 2.5 Type: WS2-RR-2-300 Payload: 2x 500 kg per compartment = 1000 kg Slide-in dimension per compartment W x D = 300 x 920 mm Slide-in dimension without center bar W x D = 655 x 920 mm Setting height: 80 to 200 mm - Center bar removable - 16 pieces galvanized steel rolls 50 mm - 4 pieces fixed castors 100 mm, 2 pieces rotatable with locking fixed castors individually height-adjustable via threaded rods Total dimensions L x W x H 1050 x 950 x 615 mm Net weight: 85 kg good condition; used

DM 750 x 60 x 304,8mm unused in original box. Specification: CS25A 802 JJ6 VK1 For stainless material. Piston rods were ground with it.

Key data: 460 mm, 400 mm, 460 mm

Control: Fanuc 32 iTB - Turning length: 400 mm - Turning diameter: 460 mm - Circulation diameter over carriage 460 mm - Tool holder directly - Tool turret with 12 positions Equipment - Rear chip conveyor with double chain - Electronic handwheel - High pressure coolant pump (6 bar 55l/min) - High pressure coolant pump (15 bar 55l/min) - 3- Jaws power chuck in main spindle - Hydraulic hollow clamping cylinder - Special gantry enclosure - GL6 – 2 axle CNC gantry loader with a Capacity of 2 x3 KG (Travel to the right side) - Electric 2x180° triple swivel gripper - Workstocker WS-280 x 400 x 14 - 14 individual pallets, each with 13 auto-centering support rods

Thermo shrink tunnel BECK type HV 601HPLS - Used equipment built in 2008 The high-performance shrink tunnel is built in an energy-saving design. He is from the The heating system and the adjustment options are designed so variably that they can be covered with foil. coated products of various contours can be shrunk cleanly. Functioning: The thermal shrink tunnel works with separate blowers to create a separately adjustable top and bottom heat. The special insulation technology reduces heat loss by radiating heat, reduces the power consumption by up to 20% and thus increases the Efficiency of the machine considerably. The shrink temperature is controlled by a digital control and precisely maintained even at high throughputs. The heating units at the top and bottom are removable; the thermal shrink tunnel is in case of maintenance available again after a few minutes. The ...

This SCHERER FEINBAU CNC244/2 lathe was manufactured in Germany. This turning machine is equipped with spindle and counterspindle, two turrets for tools and a robot for picking up finished pieces. The turning diameter is 40mm. Pneumatic and hydraulic hoses were replaced recently. There are a bar feeder FMB turbo 5-42 XT, 17 tool holders (6 for powered tools) and clamping bushings for rods available with the machine.

Production year: 2006 Injection unit: .../150-150 Screw diameter: 30 / 30 mm Injection volume: 77 / 77 cc Injection weight: 72 / 72 g Tool closure system: 200/... Clamping force: 200 t Distance between tie rods: 570 x 570 mm Tool height: 400...1050 mm Ejector stroke: 225mm On the photos shown, the peripherals are not always included.