We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,436 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Fuel oil tank diesel tank steel tank tank system with 20,000 litres capacity, according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, emptied inside and cleaned professionally and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is re-primed and painted on the outside. L = approx. 6.90 m / D = 2.00 m / weight approx. 4.2 to. / ex works, freely charged. General: The price for the gas station is valid from the Söhrewald plant near Kassel, ...
new
- brand new - 20,000 litres steel tank - storage tank - diesel tank according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome lid and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 6.90 m - D = 2.00 m - weight approx. 4.2 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repaint - dark grey / RAL hue. (On request, other RAL col ...
new
Tank system, diesel tank, fuel oil tank, storage tank with 5,000 litres of content - brand new - according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole with dome lid and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 2.80 m - D = 1.60 m - weight approx. 1.5 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repainting - RAL hue / at an addition ...
used
Machine type Electrode inverter welding rectiveror with bi-power setup Make Merkle Type MobiARC 284 cel Plant No. 106.539 Connection voltage 230/400 volts Adjustment range 20 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes 100% ED at 210 amperes Current adjustment infinitely variable max. weldable material thickness 7 mm Cooling inverter by built-in fan Version of portable assembly line Special accessories Bi-Power-Device Fuse 16 Ampere Dimensions L x W x H 485 x 200 x 435 mm Weight 17 kg Age 5 years Condition workshop-tested, good, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece of lens 90 x 110 mm white 1 piece of protective glass 90 x 110 mm 10 DIN 1 pair of welder gloves with ...
used
Lots of monobloc boring bars Rock drills and extensions from tunnelling unused and used - Diameter: 23 to 83 mm - Length: 500 mm - 5600 mm Manufacturer: ROCBO, SANDVIK, BÖHLERIT u.a. Cone Boring Rods, Monobloc Boring Rods and Extension Boring Bars The drills come from the bearing dissolution of a tunnel construction company and are mostly as good as new. See list for details Changes and errors in technical data, information and prices as well as prior sale. Number Description Description Addendum 3 cone boring bars length approx. 4,000 mm inserting end approx. 25x159 mm, as good as new 1 cone boring bar length approx. 5,000 mm Inserting end approx. 22x82 mm, as good as new 2 cone boring bars length approx. 1,000 mm Inserting end approx. 22x82 mm, as good as new 25 cone boring bars length approx. 2,400 mm inserting end approx. 25x159 mm, as good as new 18 c ...
used
Rod diameter 8 - 80 mm Rod length 1,000 - 2,100 mm Connection power 5 kVA Machine weight 950 kg
new
Machine type Electrode inverter welding rectiveror Make Merkle Type LiteARC 180 Connection voltage 1 x 230 volts Adjustment range 20 - 170 amperes Switch-on time 25% ED at 170 amperes 60% ED at 130 amperes 100% ED at 115 amperes Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter by built-in fan Version of portable assembly line Fuse 16 Ampere Dimensions L x W x H 360 x 140 x 230 mm Weight 5 kg Age 12 months Condition workshop-tested, very good, as new incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece ground cable 1 piece electrode cable 1 piece hand shield 1 piece of lens 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy version 1 piece steel wire brush, 2-row 1 piece mains plug 230 V, ful ...
new
Machine type Electrode inverter welding rectiveror Make Merkle Type LiteARC 160 Connection voltage 1 x 230 volts Adjustment range 15 - 160 amperes Switch-on time 25% ED at 150 amperes 60% ED at 90 amperes 100% ED at 80 amperes Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter by built-in fan Version of portable assembly line Fuse 16 Ampere Dimensions L x W x H 360 x 150 x 240 mm Weight 6 kg Age 12 months Special accessories Carrying strap Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece ground cable 1 piece electrode cable 1 piece hand shield 1 piece of lens 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy version 1 piece steel wire brush, 2-row 1 ...
new
Machine type Electrode inverter welding rectiveror Make Merkle Type MobiARC 160 Connection voltage 1 x 230 volts Adjustment range 15 - 160 amperes Switch-on time 25% ED at 150 amperes 60% ED at 90 amperes 100% ED at 80 amperes Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter by built-in fan Version of portable assembly line Fuse 16 Ampere Dimensions L x W x H 330 x 140 x 230 mm Weight 6 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece of lens 90 x 110 mm white 1 piece of protective glass 90 x 110 mm 10 DIN 1 pair of welder gloves with cuff 1 piece slag hammer heavy execution 1 piece steel wire brush 2-row 25 pie ...
new
- brand new - according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole with dome lid and is fitted with the following fittings equipped: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 5.30 m - D = 1.60 m - weight approx. 2.4 to. - ex works, freely charged - The container is sandblasted from the outside, primed and completely repainted - iron grey / RAL hue. (On request, other RAL colours are also possible!) general: You will receive an invoice with ...
new
- brand new - according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome lid and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 10,00 m - D = 2.00 m - weight approx. 5.9 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repainting - traffic grey / RAL hue. (On request, other RAL colours are also possible!) general: The price fo ...
used
The scope of delivery includes: 01x Grating, used Material color: hot-dip galvanized Total depth: 990 mm (support rod direction) Total width: 1,195 mm (crossbar direction) Support rod diameter: 40/2.0 mm Frame height: 40 mm Mesh size: 100 x 100 mm Weight: approx. 11.07 kg | Pcs. Internal designation: L Note: Isq02ga - The frame was flanged inwards from all sides. - The gratings can be damaged, scratched, dented, Welding, etc. show. General information about the item: This item is offered for pickup only. In addition, a desired transport or shipment of this article is with additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.
used
The scope of delivery includes: 01x Grating, used Material color: hot-dip galvanized Total depth: 995 mm (support rod direction) Total width: 1,190 mm (crossbar direction) Support rod diameter: 40/2.0 mm Frame height: 40 mm Mesh size: 100 x 100 mm Weight: approx. 11.44 kg | Pcs. Internal designation: K Note: - The frame was flanged inwards from all sides. - The gratings can be damaged, scratched, dented, Welding, etc. show. General information about the item: This item is offered for pickup only. In addition, a desired transport or shipment of this article is with additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.
used
The scope of delivery includes: 30x gratings, used Material color: hot-dip galvanized Total depth: 990 mm (support rod direction) Total width: 1,195 mm (crossbar direction) Support rod diameter: 40/2.0 mm Frame height: 40 mm Mesh size: 100 x 100 mm Weight: approx. 11.07 kg | Pcs. Weight / pallet: approx. 360.00 kg Internal designation: L Note: - The frame was flanged inwards from all sides. - The gratings can be damaged, scratched, dented, Welding, etc. show. - The above price is only valid if a complete range of 30 pcs. General information about the item: This item is offered for pickup only. In addition, a desired transport or shipment of this article is with additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.
used
The scope of delivery includes: 30x gratings, used Material color: hot-dip galvanized Total depth: 995 mm (support rod direction) Total width: 1,190 mm (crossbar direction) Support rod diameter: 40/2.0 mm Frame height: 40 mm Mesh size: 100 x 100 mm Weight: approx. 11.44 kg | Pcs. Weight / pallet: approx. 370.00 kg Internal designation: K Note: - The gratings can be damaged, scratched, dented, Welding, etc. show. - The above price is only valid if a complete range of 30 pcs. General information about the item: This item is offered for pickup only. In addition, a desired transport or shipment of this article is with additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.
used
INTERMEDIATE SHAFT YES CONNECTING ROD N°1 Capacity: 1600 tons Slide stroke: 300 mm Slide stroke length at maximum force: 0,16 mm Distance adjustment between tableand slider: 10 mm Slide stroke number in 1 min: 75 Length of a rod: 920 mm The closed height: 660 mm Table overall dimensions: 940x1200 mm Table height above floor level: 450 mm Slide overall dimensions: 860x910 mm The size of lateral windows: -Height: 560 mm -Width: 600 mm Main motor: 110 kW Press overall dimensions: -Length: 5060 mm -Width: 3940 mm -Height above floor level: 5125 mm Press weight: 120 tons
used
diameter: 400 mm = pneum. 3-jaw chuck make RÖHM, 400 mmø, with CAMLOCK flange, length of the pull rod 780 mm, ø of the pull rod 40 mm, with maintenance unit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Ergomat TBC 60 - Multi-slide turning center - as good as new exhibition machine - Rod passage: 60 mm - Tool holder: VDI 25 Compact multi-carriage turning center with eight CNC axes, two-channel control and backside machining. Developed for the ready-to-use production of complex turned parts. - Fanuc 31i-TB dual-channel control - 8 CNC-controlled axes - 2 vertical shaped slides and piercing slides - CNC cross slide at the front - Rear CNC cross slide with servo-driven Sauter turret and driven tools - Tapping spindle integrated in the turret - Astonishingly short cycle times - Backside processing - Coolant device - Generously dimensioned working area for unhindered chip fall - Chip collector - Year of construction: 2021 Specifications: Rod passage: - Round material: 60 mm - Hexagonal material: 52 mm - Square material: 42 mm Main drive: - max. spindle speed: ...
used
INTERMEDIATE SHAFT YES CONNECTING ROD N°1 1.Capacity: 1600 tons 2.Slide stroke: 300 mm 3.Slide stroke length at maximum force: 0,16 mm 4.Distance adjustment between table and slider: 10 mm 5.Slide stroke number in 1 min: 75 6.Length of a rod: 920 mm 7.The closed height: 660 mm 8.Table overall dimensions: 940x1200 mm 9.Table height above floor level: 450 mm 10.Slide overall dimensions: 860x910 mm 11.The size of lateral windows: -Height: 560 mm -Width: 600 mm 12.Main motor: 110 kW 13.Press overall dimensions: -Length: 5060 mm -Width: 3940 mm -Height above floor level: 5125 mm 14.Press weight: 120 tons
used
Rod diameter 65 mm rod length 3200 mm
used
Machine Details Warehouse number 1105-03604 Machine type CNC lathe GILDEMEISTER/gratziano brand Type GP 50 Year of construction 2000 Control type CNC Control FANUC 18 I Storage location FRANCE Country of origin Germany Delivery time by arrangement Freight base from location Technical details Rod diameter 50 mm Chuck diameter 150 mm Turning length 500 mm Speed 6000/5000 rpm Indexing per C-axis, 0.001° degrees Tapping spindle yes/yes Rod diameter 50 mm Speed 5000 rpm Indexing per C-axis, 0.001° degrees Turret head (x-fold) 2x 12-speed VDI 30 Driven tool stations 2x 12 Control FANUC 18 I Coolant emulsion Total power requirement 45 kW Machine weight approx. 6 t Space requirement approx. 4.8 x 2.2 x 2 (+Irco) m Chip conveyor Bürener Maschinenfabrik Addition Energized and ready to demonstrate ya Accessories Tool holder 10 rigid, 3 driven pieces / off Part ...
used
Machine Type Electrode Inverter Welding Rectifier with bi-power setup Merkle brand Type MobiARC 284 cel Plant No. 106.539 Connection voltage 230/400 volts Setting range 20 – 280 amps Duty cycle 35 % ED at 280 Ampere 60% ED at 240 amps 100% ED at 210 amps Current adjustment infinitely variable weldable material thickness 7 mm Cooling inverter by built-in fan Special accessories Bi-Power setup Version portable mounting system Fuse 16 amps Dimensions L x W x H 485 x 200 x 435 mm Weight 17 kg Age 6 years Condition workshop tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece attachment glass 90 x 110 mm white 1 piece of protective glass 90 x 110 mm 10 DIN 1 pair of welder gloves with cuff 1 piece of ...
used
Machine Details Warehouse number 1105-03632 Machine type CNC turning and milling center Make INDEX Type G 200 Year of construction 1997 Control type CNC Controller C200- Siemens 840 C Storage location FRANCE Country of origin Germany Delivery time immediately Freight base from location Technical details Turning diameter 200 mm Turning length 400 mm Controller C200- Siemens 840 C Circulation diameter 420 mm Rod diameter 65 mm Chuck diameter 165 mm Speed range - spindle ~ 6,000 rpm Drive power - Spindle motor 100% ED= 7.5/13/20 kW Drive power - Spindle motor 40% ED= 13.3/22/29 kW Rod diameter 65 mm Spindle bearing diameter 100 mm Chuck diameter 165 mm Speed range - spindle ~ 6,000 rpm Drive power - spindle motor 100% ED= 7.5/13 kW Drive power - Spindle motor 40% ED= 13.3/22 kW C - axis 0.001 ° Number of revolvers 2. Turret head (x-fold) 2 x 14 pos Travel - x ...
new
PUR - Adhesive unit with integrated pre-melting tank for a permanent zero joint Symmetrical device, therefore can be used on both left- and right-hand machines Glue roller diameter 25 mm Greatly reduced maintenance and cleaning effort due to PTFE Coating of all assemblies (except glue roller) suitable for flexible production capacities Order in synchronization As a rule, it can be adapted to all common machine manufacturers: - on BRANDT machines - Olympic - Series by SCM - BIESSE AKRON - Series Application height up to 60 mm Low application quantities (
used
PONAR ŻYWIEC UT 090 H injection moulding machine was built in Poland in 2007. The machine is used in processing thermoplastics using the injection moulding method. The hydraulic mould closing unit, operating with a closing force of 90 tons, is protected with significantly offset fixed and movable covers facilitating the installation of complex moulds with their accessories. The mounted moulds can be a minimum of 225 mm high, while the mould clamping plates have dimensions (L x W) of 615 x 615 mm. A MOOG-BUHL CNC control unit enables the machine to operate in any desired manual or automatic mode, as well as setting and monitoring the injection process parameters. The screw of the machine with a diameter of 30 mm rotates at a speed in the range of 10 to 380 rpm. The equipment of the machine for plastic injection moulding includes, among others, a plastic feeder and a crane with a multi ...
used
4000 Insert grid 128 x 79.5 x 3cm Used goods, very good condition, see pictures. Bearing rod height 30 mm Load-bearing rod thickness 2 mm Mesh size 7 x 3.5 cm Galvanized Negotiation price: € 25,-- net per piece Price from 70 pieces 22,50 net per piece, larger quantities on request! 35 pieces per pallet Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are always in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale! See our terms and conditions, all prices excl. VAT from stock.)
used
Machine Type Electrode Inverter Welding Rectifier Ep Systems brand Plant No.: 99J33202 Type W 150 E Connection voltage 1 x 230 Volt Setting range 5 – 150 amps Duty cycle 35 % ED at 150 Ampere 60% ED at 120 amps 100% ED at 100 amps Current adjustment infinitely variable weldable electrode 4 mm Cooling inverter by built-in fan Version portable mounting system Fuse 16 amps Dimensions L x W x H 120 x 300 x 270 mm Weight 4 kg Age approx. 10 years Condition workshop tested good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece electrode cable 16 qmm, 4 mtr. long 1 piece ground cable 16 qmm, 4 mtr. long 1 piece hand shield 1 piece attachment glass 90 x 110 mm white 1 piece of protective glass 90 x 110 mm 10 DIN 25 pieces rod electrodes Böhler 2.5 x 350 mm 25 pieces rod electrode ...
new
Machine Type Electrode Inverter Welding Rectifier with PFC control STEL brand Type MAX 191 PFC Connection voltage 1 x 230 Volt Setting range 5 – 160 amps Duty cycle 30 % ED at 160 Ampere 60% ED at 115 amps 100% ED at 100 amps Current adjustment infinitely variable weldable electrode 4 mm Cooling inverter by built-in fan Version portable mounting system Fuse 16 amps Dimensions L x W x H 420 x 160 x 280 mm Weight 9 kg Age 6 months Special accessories PFC control Condition workshop tested, new incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece electrode cable 16 qmm, 4 mtr. long 1 piece ground cable 16 qmm, 4 mtr. long 1 pair of welder gloves with cuff 1 piece slag hammer, heavy version 1 piece steel wire brush 2-row 20 pieces rod electrodes Böhler 2.5 x 350 mm 20 pieces rod ...
used
Machine Details Warehouse number 1105-03707 Machine type CNC lathe Make MYANO Type JNC 45 S Year of construction 1994 Control type CNC Control FANUC OT Storage location FRANCE Country of origin Germany Delivery time immediately Freight base from stock, freely loaded Technical details Turning diameter 45 mm Turning length 300 mm Control FANUC OT Speed 4000 1/min Rapid traverse 20 m/min Total power requirement 30 kW Machine weight approx. 5 t Information CNC lathe with sup spindle and live tools X1=105mm, Z1= 380mm, 11/15KW MAIN SPINDLE 5.5 KW COUNTER SPINDLE 1 X REVOLVER WITH driven tool positions, rod loader lns hydrobar, rod length up to 3000mm Conveyor PARTS FAENGER All prices plus law. VAT.. Changes and errors in the technical details and information excepted.
used
- For connection to multi-spindle automatic lathes - Stocking: Area magazine 4x 450 mm edition - Rod Ø: 4-52 mm (depending on the guide channel) - Ø guide channel: 44 mm - Rod length: approx. 3000-4200 mm - Dimensions LxWxH: 4600 x 750 x 1300 mm - Weight: approx. 850 kg
new
Machine type electrode inverter welding rectifier Brand Böhler Type Terra 220 RC Supply voltage 3 x 400 volts, ± 15 % Setting range 3 – 220 amperes Duty cycle 30 % ED at 220 amps 60% ED at 170 amps 100% ED at 150 amps Current adjustment infinitely variable weldable material thickness 6 mm Cooling inverter by built-in fan Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 410 x 150 x 330 mm Weight 11 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery welding system with the following accessories 1 piece ground cable 1 piece electrode cable 1 piece hand shield 1 piece of glass 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 20 rod electrodes in 2.0 x 250 mm 20 rod electrodes in 2.5 x 350 mm 1 piece instruction manual Warranty 24 months fro ...
used
Manufacturer: Alfing Type: E II special machine Machine No.: 10-02541 Year of construction: 1976 Weight of the plant: approx. 43t General / technical data: Connecting rod stitch size: 400mm- 1.100mm Spindle thickness: depending on tools up to Ø350mm Installation area (l x w x h): approx. 6000 x 10000 x 3000mm Power Supply: 380V / 50Hz / 180kW Remark: ALFING special machine for fine spindling of connecting rod bearing seats for large engines. The machine has a clamping device that can be moved on the middle bed. The processing is done on 2 sides. Station 01 D with laterally movable carriage unit for adjusting the stitch size. The machine has a splash guard for wet machining. On the machine connecting rods of the Type 540 and Type 528 were produced (Deutz engines up to 300 liters displacement and 4000hp) Composed of: – 1 machine bed – 2 sled ...
used
Turning head, spindle tool, boring tool, boring tool, boring rod type 040.084S0012 Tool holder: SK40 - DIN 69871 Boring rod diameter: 70 mm Machining diameter: 75-120 mm Tool insert: triangle 10.5 mm - Tool on the pictures set to approx. 108 mm Machining depth: max. 200 mm Tool Total length: 300 mm Net weight: 6.5 kg Used, but good condition; used
new
Machine type electrode inverter welding rectifier Brand Alphaweld Type Alphaforce E-160 Supply voltage 1 x 230 volts Adjustment range 5 – 160 amperes Duty cycle 25 % ED at 160 amps 60% ED at 100 amps 100% ED at 80 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 320 x 130 x 200 mm Weight 6 kg Age 24 months Condition workshop tested, like new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece of glass 90 x 110 mm white 1 piece protective glass 90 x 110 mm 10 DIN 1 pair of welding gloves with cuff 1 piece slag hammer heavy version 1 piece steel wire brush 2-row 25 rod electrodes ...
new
Machine type electrode inverter welding rectifier Brand Alphaweld Type Alphaforce E-200 Supply voltage 1 x 230 volts Setting range 15 – 160 amperes Duty cycle 25 % ED at 200 amps 60% ED at 110 amps 100% ED at 100 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 280 x 130 x 210 mm Weight 8 kg Age 24 months Condition workshop tested, like new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece of glass 90 x 110 mm white 1 piece protective glass 90 x 110 mm 10 DIN 1 pair of welding gloves with cuff 1 piece slag hammer heavy version 1 piece steel wire brush 2-row 25 rod electrodes ...
used
TECHNICAL SPECIFICATIONS Manufacturer: MOGENSEN Designation: Stangensizer / Stangenrost Type: DX3527 Year of construction: 1994 Version: Two-deck Clear length: 3,500 mm Clear width: 2,300 mm Total height: 2,750 mm Rod diameter above: 70 mm Rod diameter bottom: 40 mm Top gap distance: 216 mm Gap distance below: 330 mm SPECIFIC COMMENT - Reappraisal 2020, since then unused - Robust construction - Ideal for coarse separation
used
Inverter welding machine for MMA welding TECHNOLIT type PROFImat 170 Plus MMA welding machine, inverter welding machine, electric manual welding inverter Serial no.: TB1703500316 Item no.: 440030 Year of construction 2022 Power TIG (DC) 170 Amp. 45% ED 150 Amp. 60% ED 135 Amp. 100% ED Power MMA 170 Amp. 35% ED 145 Amp. 60% ED 125 Amp. 100% ED Adjustment range 5-170 Amp. infinitely variable Mains connection 230 Volt, 50 Hz hot-start function (optimises ignition behaviour, simplifies welding start of electrodes that are difficult to ignite)- Anti-stick function (optimises electrode guidance and prevents electrode from sticking)- Arc force function (optimises arc stability and improves penetration) - Lift-Arc ignition - Rod electrode welding, can be used for all electrode types up to 4 mm- Ground cable with plug connection - Electrode rod with 3 meter cable and plug connection - equippe ...
used
faceplate diameter: 3200 mm swing diameter: 3500 mm turning height: 2200 mm range L-W-H: 7730 x 6240 x 6700 mm control: Typ 840 D sl voltage: 3 x 400 V frequency: 50 Hz turning speeds: 0,8 - 40 U/min max. turning diameter: 3500 mm total power requirement: 51 kW weight of the machine ca.: 86 t Technical specifications Machine type: CNC vertical lathe Manufacturer: Rafamet Year of manufacture: 1973 conventional General overhaul with control retrofit 2010 Control upgrade 2016 Control: Siemens 840 D Sl Condition: very good faceplate Turning diameter of the faceplate 3,200 mm Number of rotation stages of the face plate 3 (infinitely variable) Speed ranges of the faceplate 0.8 - 40 rpm Level I 0.8 – 3 rpm Level II 0.8 - 11 rpm Level III 0.8 – 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above the faceplate 2,200 mm vertical supports S ...
used
Inv. Num. : 6520 Type: Compact A25 Producer: Kovosvit Generated: 2008 Parameters: Control system: Fanuc bar diameter: 22 (26) mm Maximum rod length: 4000 mm Minimum main spindle speed: 50 1/min Maximum spindle speed: 8000 1/min Maximum main spindle power: 5.5 kW Length: 2250 mm Width: 1480 mm Height: 1890 mm Weight: 3400 kg The machine is completed with a guide tube for a 3-meter rod and an internal feed. Included in the sale are: Clamping and feeding collets Auxiliary heads (2x collet / 2x jaw) Collet holder VDI25 Axis tool holder VDI25 Straight and angled power tool holders. Equipping the machine with tools (square 12x12 mm and 16x16 mm)
used
Inv. Num. : 6522 Type: BS18-III Producer: Tsugami Mori Generated: 2000 Parameters: rod diameter: 18 mm Min. rod diameter: 3 mm Maximum spindle speed: 5000 1/min Number of all tools: 16 pieces Number of CNC controlled axes: 5 pieces Equipment: Bar feeder (3 meters) IEMCA Genius 226 Part of the offer: Guiding collets to feed Collet E140 of the main and counter spindle Reducing bushes (incl. collets ER11 ER16) Guide sleeve collet F609 Equipping the machine with tools (square 12x12 mm)
new
pressure: 80 t stroke: 250 mm table surface area: 1040 x 260 mm column travel between the guideways: 1040 mm ajustment speed: 8,0 mm/sec working feed: 5,0 mm/sec return speed: 10,0 mm/sec engine output: 5,5 kW weight of the machine ca.: 835 kg. dimensions of the machine ca.: 1810 x 700 x 2100 mm Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: 1x delivery speed 1x working speed 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the ...
new
pressure: 60 t stroke: 250 mm table surface area: 1040 x 370 (315) mm column travel between the guideways: 1040 mm ajustment speed: 8,0 mm/sec working feed: 4,0 mm/sec return speed: 10,0 mm/sec engine output: 4,0 kW weight of the machine ca.: 800 kg. dimensions of the machine ca.: 1.700 x 700 x 2.100 mm Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: 1x delivery speed 1x working speed 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounte ...
used
Rod diameter 5-102 mm Rod length 1600 mm
used
pneumatic cylinder, round cylinder, double-acting CAMOZZI 24N2A16A200 stroke: 200 mm piston diameter: Ø 16 mm rod diameter: Ø 6 mm rod thread: M6 x 1,0, Length: 15 mm pmax: 0.1 - 1.0 MPa ( 1 - 10 bar ) Mounting thread: M16 x 1.5, Length: 15 mm Mounting socket: Ø 6 mm, Length: 12 mm New ! Dimensions: 312 x 21 x 20 mm
used
Miniature cylinder, pneumatic cylinder, double-acting, 2 pieces SMC CDJP2B16-10D Piston diameter: Ø 16 mm stroke: 10 mm rod diameter: Ø 6 mm rod thread: M5 x 0.8, length: 10 mm max. 0.7 MPa ( 7 bar ) New ! Dimensions: 58 x 20 x 25 mm
used
Compact cylinder, pneumatic cylinder, double-acting, 2 pieces SMC CDQ2B32-25DMZ Piston diameter: Ø 32 mm stroke: 25 mm rod diameter: Ø 16 mm rod thread: M14 x 1,5, Length: 22mm max. 1.0MPa (10 bar) New ! Dimensions: 87 x 45 x 50 mm
used
Pneumatic cylinders, variant cylinders, round cylinders, double-acting, 3 pieces SMC 1x C85N8-10 2x C85N10-10 stroke: 10 mm piston diameter: Ø 8 / 10 mm rod diameter: Ø 4 mm rod thread: M4 x 0,7, Length: 12mm pmax: 1.0 MPa ( 10 bar ) Mounting thread: M12 x 1.25, length: 10 mm Mounting socket: Ø 4 mm, length: 8 mm width across flats: 19 / 15 mm New ! Dimensions ( without nut ): 97 x 15 x 15 mm
used
Welding grating, Welding grating, Light grating, Grating, with frame PAGUS 5275 x 1030 x 30 Length: 5275 mm Width: 1030 mm Frame cross-section: 30 x 30 mm Mesh size: 34 x 38 mm Support rod: 30 x 3 mm Filler rod (twisted): Ø 5 mm Material: Steel, galvanized used, tested ! Dimensions ( horizontal ): 5275 x 1030 x 30 mm
used
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 90 mm -Piston rod: Ø 70 mm -Pipe Ø outside: mm -Stroke: 300 mm -Total length retracted: 530 mm -Admission piston rod: Ø 44 mm ball head -Ideal for building a hydraulic press -Number: 1x available -Price: per piece -Weight: 35 kg/piece
used
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 40 mm -Piston rod: Ø 40 mm -Pipe Ø outside: 55 mm -Stroke: 500 mm -Total length retracted: mm -Admission hole: 30 mm -Admission piston rod: Ø 44 mm ball head -Ideal for building a hydraulic press -Number: 50x available -Price: per piece -Weight: 12.5 kg/piece