rod used for sale

weight max. in kg: 2500 kg fork length: 800 mm stroke height: min 85, max 200 mm : 155 mm length in width: 540 mm number of wheels: 2 vorne, 2 hinten tire equipment: PU/Pu fork arm (length x width x thickness): 800 x 155 x 50 mm weight of the machine ca.: 0,059 t dimensions: 1,15 x 0,54 x 1,21 m SPECIAL PRICE ! - metered lowering of heavy loads - low maintenance hydraulic unit in steel version - Rounded fork tips for more safety when entering the pallet - Hard chromed piston rod and overload valve - Steering and load rollers ball bearings, for easy running even under load The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 2500 kg fork length: 1150 mm stroke height: min 85, max 200 mm : 155 mm length in width: 540 mm number of wheels: 4 vorne, 2hinten tire equipment: PU/Pu fork arm (length x width x thickness): 1150 x 155 x 50 mm weight of the machine ca.: 0,068 t dimensions: 1,5 x 0,54 x 1,21 m SPECIAL PRICE ! - metered lowering of heavy loads - low maintenance hydraulic unit in steel version - Rounded fork tips for more safety when entering the pallet - Hard chromed piston rod and overload valve - Steering and load rollers ball bearings, for easy running even under load The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 2500 kg fork length: 950 mm stroke height: min 85, max 200 mm : 155 mm length in width: 540 mm number of wheels: 2 vorne, 2 hinten tire equipment: PU/Pu fork arm (length x width x thickness): 950 x 155 x 50 mm weight of the machine ca.: 0,059 t dimensions: 1,3 x 0,54 x 1,21 m SPECIAL PRICE ! - metered lowering of heavy loads - low maintenance hydraulic unit in steel version - Rounded fork tips for more safety when entering the pallet - Hard chromed piston rod and overload valve - Steering and load rollers ball bearings, for easy running even under load The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 2000 kg fork length: 1800 mm stroke height: min 85, max 200 mm : 155 mm length in width: 540 mm number of wheels: 4 vorne, 2hinten tire equipment: PU/PU fork arm (length x width x thickness): 1800 x 155 x 50 mm weight of the machine ca.: 0,088 t dimensions: 2,15 x 0,54 x 1,20 m SPECIAL PRICE ! - metered lowering of heavy loads - low maintenance hydraulic unit in steel version - Rounded fork tips for more safety when entering the pallet - Hard chromed piston rod and overload valve - Steering and load rollers ball bearings, for easy running even under load The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 t throat: 180 mm stroke: 10 - 75 mm no. of strokes: 125 Hub/min dayligth: 225 mm distance table - lower edge of ram: 300 mm ram adjustment: 50 mm table-size: 360 x 560 mm ram head dimension: 260 x 340 mm work height max.: 670 mm table hole: 140 mm ram hole: 35 mm total power requirement: 2,2 kW weight of the machine ca.: 2,8 t dimensions of the machine ca.: 1,1 x 1,3 x 2,0 m This eccentric press machine with 80 ton capacity is suitable to carry out tasks involving deep-drawing, cutting, punching and stamping. Our Profi Press mechanical presses can be used for various applications in many different industries: the automotive, railway and aerospace industries (for example) and many more related industries that use metal forming. Made of S355JR steel and equipped with a 4 guided ram. The rod is made out of high-strength forged steel and high-performance alloy bushings. This hig ...

pressure: 125 t throat: 300 mm stroke: 10 - 135 mm no. of strokes: 50 Hub/min dayligth: 315 mm distance table - lower edge of ram: 450 mm ram adjustment: 60 mm table-size: 600 x 900 mm ram head dimension: 315 x 550 mm work height max.: 800 mm table hole: 250 mm ram hole: 50 mm total power requirement: 11,0 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: 1,65 x 1,68 x 2,87 m This eccentric press machine with 80 ton capacity is suitable to carry out tasks involving deep-drawing, cutting, punching and stamping. Our Profi Press mechanical presses can be used for various applications in many different industries: the automotive, railway and aerospace industries (for example) and many more related industries that use metal forming. Made of S355JR steel and equipped with a 4 guided ram. The rod is made out of high-strength forged steel and high-performance alloy bushings. Thi ...

pressure: 60 t throat: 235 mm stroke: 10 - 100 mm no. of strokes: 60 Hub/min dayligth: 270 mm distance table - lower edge of ram: 370 mm ram adjustment: 50 mm table-size: 470 x 700 mm ram head dimension: 310 x 410 mm work height max.: 670 mm table hole: 190 mm ram hole: 40 mm total power requirement: 4,0 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 1,23 x 1,46 x 2,35 m This eccentric press machine with 80 ton capacity is suitable to carry out tasks involving deep-drawing, cutting, punching and stamping. Our Profi Press mechanical presses can be used for various applications in many different industries: the automotive, railway and aerospace industries (for example) and many more related industries that use metal forming. Made of S355JR steel and equipped with a 4 guided ram. The rod is made out of high-strength forged steel and high-performance alloy bushings. This  ...

used spiral mixer Kemper SP 150 ALH extendable Manufacturer : KemperType : SP 150 ALH150 kg flour 240 kg dough2 clocksstainless steel kettle and spiralwith 2 extendable boilers2 x automatic timers 2 x speeds slow and fast with flour dust cover Machine can be inspected and tested in our warehouseused bakery machines, kneading machine Spiral mixer with fixed stainless steel kettle from Kemper robust and stable, Spiral mixer Kemper SP 150 ALH for the production of high-quality Doughs. It can be bread doughs, bread doughs, pastry doughs and similar doughs.Kemper spiral mixers work on 3 zones kneading principle spiral guide rod so that the dough becomes woolly, easy to process with maximum oxygen input in the dough.Kemper spiral mixer

Spiral mixer extendable Kemper ST 125 A Manufacturer : KemperType : ST 125 A125 kg flour 200 kg dough2 clocksstainless steel kettle and spiralwith 2 extendable kettle2 x automatic timers 2 x speeds slow and fast with flour dust cover Machine can be viewed and tested in our warehouseused bakery equipment, kneading machine Spiral mixer with fixed stainless steel kettle from Kemper robust and stable, spiral mixer Kemper SP 125 A for the production of high-quality doughs. It can be bread doughs, bread doughs, pastry doughs and similar doughs.Kemper spiral mixers work on 3 zones kneading principle spiral guide rod so that the dough becomes woolly, easy to process with maximum oxygen input in the dough.Kemper spiral mixer

Manufacturer : KemperType : SP 150 ALH150 kg flour 240 kg dough2 clocksstainless steel kettle and spiralwith 2 extendable kettles2 x automatic timers 2 x speeds slow and fast with flour dust cover Machine can be inspected and tested in our warehouseused bakery machines, kneading machine Spiral mixer with fixed stainless steel bowl from Kemper robust and stable, spiral mixer Kemper SP 150 ALH for the production of high-quality doughs. It can be bread doughs, bread doughs, pastry doughs and similar doughs.Kemper spiral mixers work on 3 zones kneading principle spiral guide rod so that the dough becomes woolly, easy to process with maximum oxygen input in the dough.Kemper spiral mixer

Key data: 425 mm, 1240 mm, 3250 1/min

Equipment • Main spindle 22/33kW • 3-jaw chuck D 315mm • Robot interface • 12 station turrets VDI 40 • Tool drive for all stations • C-axis •Y-axis •Conveyor • Coolant pump 8/20bar • 4-way indicator light • Automation package • Automatic sliding hood, electric • Connection nozzle for oil mist separator • Electr. Handwheel •Y-axis • Preparation for bezel Turning diameter max. approx. 425mm Turning diameter standard ca.315mm Feed size approx. 300mm Turning length approx. 1240mm Rod diameter max. approx. 100mm Turret stations 12 X-axis approx. 307mm Z-axis approx. 1,240mm Y-axis approx. 120 (+-60)mm Tailstock approx. 1,200 mm Spindle speed max. approx. 3,250 rpm Speed AGW max. approx. 4,000 rpm Rapid traverse X/Z approx. 30m/min Rapid traverse Y approx. 22.5m/min (Errors in the technical data and information ...

Manufacturer: Gildemeister Type: Twin 65 with counter spindle & automation. Year of construction: 2010 Control: Siemens 840D powerline Circulation diameter above bed: 250 mm Flat travel carriage 1: 300 mm Longitudinal travel carriage 1: 650 mm Perpendicular Y-axis: ± 40 Flat travel slide 2: 180mm Longitudinal carriage 2: 650mm Rod passage max: ø 65 Drive power:40/100% 25/37 KW Speed range from – to: 20-5000 rpm Weight approx.: 10.000 kg Equipment: 2x star turret: 12x Driven tools: 12x VDI 40 2 turrets (all stations driven) Tool carrier: 12x VDI 40 2 turrets (all stations driven) Tailstock: Yes + counter spindle MK 4 Quill mounting: Yes Chip Conveyor: Yes Accessories: -Y-axis. -Coolant tank: 980l / 80 bar. -Coolant device for lower turret 8/20/80 bar. -Belt filter system -Mechanical oil mist separators 600m³ with contamination indi ...

Skinetta ASK 450 Penalty Banding Machine Machine Purpose The tightening banding machines of the SKINETTA series serve the purpose of tightening individual products or several individual products with polyethylene film. banding (wrapping). In contrast to shrinking machines, the wrapping film is pulled tightly around the container before sealing. This streamlining is the main advantage of the procedure. The result is up to 20% less film consumption. A special advantage of the patented SKINETTA tightening system is the infinitely variable, fine dosing. The sealing (welding) of the film takes place in the smallest of spaces and a clean sealing seam with very small protrusions is created. By connecting a SKINETTAther or SKINETTAshrink heat cover and using a correspondingly wide film, the film protrusion protruding beyond the container can be shrunk laterally. This pre-singing m ...

Pneumatic cylinder, compact cylinder -Stroke: 40 mm -Piston rod: 8 mm -Number: 2x available -Price: per piece -Weight: 0.2 kg

Recon Part Number: A203211A all basic pins 1st level undersecree all connecting rod pins 1st stage under dimension incl. counterweights and gear Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ------------ Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 90 mm -Piston rod: Ø 50 mm -Stroke: 260 mm -universal: applicable -Dimensions: 660/180/H100 mm -Weight: 28 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 50 mm -Piston tube outside: Ø 135 mm -Stroke: 300 mm -Weight: 52 kg

Pneumatic Cylinder, Air Cylinder, Pneumatic Stamp, Air Stamp -Pneumatic cylinder: stroke 125 mm -Piston rod: Ø 10 mm M10 -Dimensions: 267/35/H55 mm -Weight: 0.4 kg

Bracket, holder, bracket, support bracket -Bracket: adjustable in height -Threaded rod: O 45 mm -Dimensions: 255/152 / H225 mm -Weight: 10.7 kg

Bakery dough kneader Kemper SPL 75 with stainless steel kettle and stainless steel spiral for maximum 120 kg dough immediately available in stock for sale. The spiral kneader is slow and fast at 2 speeds. 2 speeds slow and fast 2 timers automatic on and off with plastic flour dust cover Boiler, spiral and guide rod made of stainless steel Push button control Boiler capacity approx. 175 litres Boiler diameter inside 76cm boiler height inside 44cm Boiler right left-hand Hand and automatic switch Machine is rollers with 2 locks Easy operation and cleaning Capacity for a maximum of 120 kg of dough or a maximum of 75 kg of flour -more pictures and information on request -Shipping and trade-in on request -Machine can be inspected and tested in our warehouse

Pneumatic cylinders, air cylinders, pneumatic rams, air rams, standard cylinders, compact cylinders -Stroke: 75 mm -Piston diameter: 32 mm -Piston rod: 16 mm -Dimensions: 115/45/H50 mm -Weight: 0.5 kg

pressure: 63 t throat: 235 mm stroke: 6 - 100 mm no. of strokes: 60 Hub/min dayligth: 270 mm distance table - lower edge of ram: 370 mm ram adjustment: 80 mm table-size: 650 x 600 mm ram head dimension: 180 x 230 mm work height max.: 700 mm table hole: 110 mm total power requirement: 4,0 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m This eccentric press machine with 80 ton capacity is suitable to carry out tasks involving deep-drawing, cutting, punching and stamping. Our Profi Press mechanical presses can be used for various applications in many different industries: the automotive, railway and aerospace industries (for example) and many more related industries that use metal forming. Made of S355JR steel and equipped with a 4 guided ram. The rod is made out of high-strength forged steel and high-performance alloy bushings. This high performance Profi Press feature ...

Hello all We have just dismantled 1 Wartsila W8L32 main engine and we have the following spares available 8 pcs cylinder head covers reconditioned exhaust seats bores std. size 8 pcs Piston brand new condition 8 pcs Cyl. Liner brand new condition 8 pcs Water Jacket 8 pcs Connecting Rod 8 pcs Camshaft Pieces 1 piece Crankshaft standard 1 piece Engine Block 1 piece Coupling CENTAX 82 Engine driven pumps , Turning gear , Air cooler, Lube Oil cooler İf interested in anything please contact info@fin-marine.com best regards

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 465 mm -Piston rod: Ø 25 mm -Dimensions: 235/160/H705 mm -Weight: 28 kg

used spiral kneader Kemper SPL 100 with stainless steel boiler and stainless steel tool in good condition immediately available for sale. The machine can be driven on rollers with locking device and with a replica flour rod cover including safety switch. Trade-in and delivery on request. -Stainless steel boiler -Stainless steel spiral -2 x Timers Automatic -2 x speeds slow and fast -with flour dust cover -for 100 kg flour or 160 kg dough -more pictures and information on request -Shipping and trade-in on request -Machine can be inspected and tested in our warehouse

Spiral kneader Kemper SPL 75 Bakery dough kneader Kemper SPL 75 with stainless steel kettle and stainless steel spiral for maximum 120 kg dough immediately available in stock for sale. The spiral kneader is slow and fast at 2 speeds. 2 speeds slow and fast 2 timers automatic on and off with plastic flour dust cover Boiler, spiral and guide rod made of stainless steel Push button control Boiler capacity approx. 175 litres Boiler diameter inside 76cm boiler height inside 44cm Boiler right left rotation Hand and automatic switch Machine is rollers with 2 locks Easy operation and cleaning Capacity for a maximum of 120 kg of dough or a maximum of 75 kg of flour -more pictures and information on request -Shipping and trade-in on request -Machine can be inspected and tested in our warehouse

Wedge rod feed, swivel feed, swivel swivel feed, power clamp feed -Feed size: Ø 250 mm -Weight: 35.5 kg

High: 1900 mm, Long: 1200 mm, Force: 27 TN, Width: 1200 mm, Neckline: 300 mm, Stem travel: 210 mm, Piston rod ø of: 75 mm, Surface of the table: 1000 x 400 mm, Step between uprights: 400 mm, Specification: Hydraulics

High: 2.050 mm, Long: 750 mm, Force: 10 tons, Width: 600 mm, Weight: 800 Kg., Neckline: 150 mm, Stem travel: 200 mm, Rate of climb: 10 cm / sec, Piston rod ø of: 65 mm, Surface of the table: 300 x 300 mm., Specification: Hydraulics

used spiral mixer extendable Kemper ST 125 A Manufacturer : KemperType : ST 125 A125 kg flour 200 kg dough2 clocksstainless steel kettle and spiralwith 2 extendable boiler2 x automatic timers 2 x speeds slow and fast with flour dust cover Machine can be inspected and tested in our warehouseused bakery equipment, kneading machine Spiral mixer with fixed stainless steel bowl from Kemper robust and stable, Spiral mixer Kemper SP 125 A for the production of high-quality Doughs. It can be bread doughs, bread doughs, pastry doughs and similar doughs.Kemper spiral mixers work on 3 zones kneading principle spiral guide rod so that the dough becomes woolly, easy to process with maximum oxygen input in the dough.Kemper spiral mixer

T-slot table, High: 2.500 mm, Long: 1.700 mm, Pump: 18 L / mm, Force: 5 TN, Width: 1.000 mm, Voltage: 220/380 V, Neckline: 160 mm, Stem travel: 200 mm, Total power: 4 CV, Piston rod ø of: 70 mm, Surface of the table: 450 x 300 mm, Step between uprights: 200 mm, Maximum working pressure: 70 kg / cm2, Specification: Hydraulics

Spiral dough kneading machine Kemper SP 125 L used bakery machines, kneading machine spiral kneader with solid stainless steel boiler from Kemper robust and stable, spiral kneader Kemper SP 125 L for the production of high-quality Teigen.Es can roll dough, bread dough, pastry dough and similar doughs.Kemper spiral kneaders work on 3 zones kneading principle spiral guide rod so the doughs become woolly, processing-friendly with maximum oxygen input in the dough. Kemper Spiral Kneader - Stainless steel boiler - Stainless steel spiral - 2 x timers automatic - 2 x speeds slow and fast - with flour dust cover - for 125 kg of flour or 200 kg of dough Machine can be inspected and tested in our warehouse. Shipping and trade-in as well as further information and pictures on request.

Kemper ST 125 A used spiral mixer extendable Manufacturer : KemperType : ST 125 A125 kg flour 200 kg dough2 clocksstainless steel kettle and spiralwith 2 extendable boiler2 x automatic timers 2 x speeds slow and fast with flour dust cover Machine can be viewed and tested in our warehouseused bakery equipment, kneading machine Spiral mixer with fixed stainless steel bowl from Kemper robust and stable, Spiral mixer Kemper SP 125 A for the production of high-quality Doughs. It can be bread doughs, bread doughs, pastry doughs and similar doughs.Kemper spiral mixers work on 3 zones kneading principle spiral guide rod so that the dough becomes woolly, easy to process with maximum oxygen input in the dough.Kemper spiral mixer

Two T-slot tables, High: 2.500mm, Long: 1.700mm, Pump: 18L / mm, Force: 5 TN, Width: 1.000mm, Voltage: 220/380 V, Neckline: 160 mm, Stem travel: 200 mm, Total power: 4 CV, Piston rod ø of: 70 mm, Surface of the table: 450 x 300 mm, Maximum working pressure: 70 kg / cm2, Specification: Hydraulics

Catalog No. : 5750 Type: MCFV 1060 Producer: TAJMAC Made in: 2005 Characteristic: Control system: Fanuc Series 18i-MB5 Length of the working table: 1270 mm Width of the working table: 590 mm Maximum table load (evenly distributed): 1350 kg Maximum rotary speed of the spindle: 12000 1/min X-Axis travels: 1016 mm Y-Axis travels: 610 mm Z-Axis travels: 760 mm Equipment: Rotary table Internal cooling 4th axis Workpiece probe MP12 2022: New spindle Chip conveyor High pressure pump Ball bar 2021: X and Y axis laser compensation 2022: GO spindle - new ball screw on X and Y axis - replacement of the rod for holding tools - new bearings - geometry

Tip height: 180 mm Diameter: 240 mm Space requirement: approx. 1550 x 400 x 350 mm Motor: GOULD Permanent Magnet Servomotor Type: M23Y-Y60Y-900N-TH Encoder ROD 426 – 2000 Condition: very good (used) About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization

Wheat beer fermentation tank, Fabr. Schulz, with 55.02 hl content, standing on calotte feet, in stainless steel, coolable over 2 cooling zones in the frame, with manhole in the lower half and hefeluke with visible glass in the upper half, with spray head, pulled down cleaning line, floor display via hose and measuring rod, with sampler, ladder bracket, with spout, built in 1996

Bought new in Slovakia. FANUC system, tailstock, suction belt, workpiece catcher. It is also possible to buy a 3m rod feeder FEDEK SN-542 (almost unused), which was previously connected to it, we also bought it new.

Slab Caster Main Data • Manufacturer: Concast-Sumitomo • Number of Strands: 1 • Machine Radius: 8m • Number of Segments: 7 • Mould Size: 760 -1060mm (not adjustable when casting) • Slab Thickness: 160mm • Oscillator: Mechanical • Straightening: Multipoint • Cooling: Single Zone • Casting Speed: 1.7 m/min • Capacity: 650 kt/y • Tundish Weighing: Yes • Tundish Equipment: Stopper Rod, Submerged Entry Nozzle • Dummy Bar: Bottom Entry, Linkage Design • Slab Discharge: Propane Gas Torch Cutting • Breakout Detection: Yes. • Commissioned in 1992. • It has been mothballed since 2013.

We offer a Dokadek slab formwork 272.62m² with accessories. The formwork is checked and sorted. All elements are covered with original Doka Xlife formwork. Exposed concrete class 2/3 possible without any problems. Suitable for higher-value applications. New value 120081,00€ - 70% discount = special net price 36150,00€ 77 x 586501000 Dokadek element 1.22 x 2.44m 22 x 586502000 Dokadek element 0.81 x 2.44m 0 x Dokadek compensator 2.44m 27mm / 21mm 0 x Dokadek compensator 1.22m 27mm / 21mm 0 x Dokadek compensator 0.81m 27mm / 21mm 120 x 586506000 Dokadek support head 6 x 586539000 Dokadek corner head 30 x 586536000 Dokadek Wall Head 10 x 183063000 Dokadek Wall Bracket 25 x 586518000 Dokadek suspension bracket H20 4 x 586540000 Dokadek Mounting Rod B 2 x 586541000 Dokadek stripping tool 0 x 582528000 Spring Bolt 16mm 3 x 583011000 Doka reusable container 1.20x0. ...

Professional spindle grinding machine with aluminum sliding table and tilting device KUSING SFna 1200. Technical parameters: Power of the main engine: 3 kW (4 hp) Spindle diameter: ø 30 mm Spindle length: 140 (120) mm Stroke of the spindle: 170 mm Maximum tool diameter: ø 180 mm Tool speed: 3000/5000/8000 rpm The size of the iron table: 980 x 450 mm Size aluminium table: 1200 x 360 mm Tilt: 0-45° Weight of the machine: 320 kg Formatting trolley of the highest quality according to the principle of hardened rod guide (ALTENDORF principle) KuSING has been manufacturing woodworking machines since 1991.

Professional formatting saw for solid wood with inclination. Technical parameters: Maximum saw blade diameter: ø 400/30 mm Main motor power: 3 kW (can be 4 kW or 5.5 kW) Speed of the main saw blade: 4000 rpm Maximum cutting height: 140 mm Inclination of the saw unit: 0 - 45 ° Dimensions of the iron table: 800 x 550 mm Aluminum formatting sable: 1200 × 360 mm Cutting length: 1200 mm Weight of the machine: 400 kg Description of the machine: 1) Quality casting core 2) Hardened rod formatting table (Altendorf principle) 3) Large cutting height 4) High quality Italian motor with electromagnetic mechanical brake

weight max. in kg: 2500 kg fork length: 1150 mm stroke height: min 85, max 200 mm : 155 mm length in width: 540 mm number of wheels: 4 vorne, 2hinten tire equipment: PU/Pu fork arm (length x width x thickness): 1150 x 155 x 50 mm weight of the machine ca.: 0,068 t dimensions: 1,5 x 0,54 x 1,21 m SPECIAL PRICE ! - metered lowering of heavy loads - low maintenance hydraulic unit in steel version - Rounded fork tips for more safety when entering the pallet - Hard chromed piston rod and overload valve - Steering and load rollers ball bearings, for easy running even under load The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bearing number: 3685 LOADER Manufacturer: Top Automazioni , Type: 337SX Machine NO.: BRS13122782 RE-S, Year of construction: 2013 Specifications: Stang dia. 6-37 mm rod length 3200 mm Length: 4500 mm, Høhe: , Width: , Weight: 1300 kg

Winding machine Böhl type SENIOR / S-2400 VA Specifications: • Fully automatic • For packaging rod-shaped products • Product height (mm): 19 - 600 • Product width (mm): 600 - 2100 • Product length (mm): 2400 - 5700 • Product weight (kg): 3000 • Cross-sectional diagonal max. (mm): 2184 • Brake motor for winding ring drive: controlled by frequency converter • 2 driven roller conveyors: each 3000 mm long for the inlet side of the machine, designed with brake motor • 2 driven roller conveyors: for the outlet side of the machine (1 piece 3000 mm long, 1 piece 4400 mm long) designed with brake motor • 1 packing material holder: for stretch film, crepe paper, PE film etc. • Packing material roll width max. (mm): 500 • Automatic gripping, cutting and laying device: for PE stretch film, in version as smooth cut • Electrical device for laying edge  ...

Welding rectifier make MESSER-GREISHEIM type Uniwig G 200Built in 1987Power Rectifier: 15 - 180 Aat 180 A: 35% EDat 150 A: 60% EDat 100 A: 100% EDPower TIG welding: 2 - 200 Aat 200 A: 35% EDat 150 A: 60% EDat 100 A: 100% EDOutside dimensions approx: 600 x 1000 x 930 mmfor rod electrode and TIG DC steel / VAWith- mobile- TIG hose package with burner 4.0 m- Ground cable with clampsvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

General: Year of construction 2003 Switch-on hours 33,321 h Working hours 10,144 h Control Siemens 840D ShopTurn Travel X 400 mm Z 400 mm Rapid traverse 12 mm/min Spindle: Spindle speed 8,000 rpm Rod passage 32 mm Turning diameter 120 mm Revolver: Number of stations 16-fold Number of driven tools 8 Tool holder VDI16 Dimensions and weight: Dimensions 2.500 x 1.400 x 1.700 mm Weight approx. 2,300 kg Other equipment and included accessories: Tailstock programmable Electronic handwheel Oil mist extraction Preparation for bar loaders

ID3202 Wellco-Drill WD80 approx. 3110 hours/ hours Drilling rig, Hatz 3-cylinder diesel engine, fully hydraulic cylinder feed, flushing drill head - reinforced version, drive pin and pulling bell, rod catching device, centrifugal pump, cable winch, 4 hydraulic support cylinders, control panel, machine has been general overhauled (the control blocks have been completely renewed, the chain profile is new, the interceptor is new, the drill head has been completely overhauled, all possible wear parts have been renewed, all hydraulic components have been overhauled) Drilling rig, Hatz 3-cylinder diesel engine, fully hydraulic cylinder feed, directional drill head - reinforced design, drive journal and drawing bell, linkage interceptor, centrifugal pump, winch, 4 hydraulic support cylinders, control panel, machine has been completely overhauled (the control blocks have been completely rene ...

ROLL DIAMETER 550 mm POLL WORKING LENGTH 1530 mm MOTOR POWER 110 KW DIMENSIONS: 630022301830 (L×W×H) SPEED RATIO OF ROLLS 1:1.27 Structure description 1 Base frame is welded and annealed . 2 The motor is 3- phase asynchronous motor, protection levels :IP54. 3 The driving type :Single out- shaft or double out- shaft. The speed reducer is hard gear reducer,which has long service life and low noise. 4 The roller bearing is rolling bearing with Low noise, save power almost 20%. the roller bearing use grease lubricating. 5 The nip adjusting Motor type 6 This machine is equipped with two pieces of moving blade. 7 Safety device : Pull the safety rod to achieve emergency stop. It can be installed with kick stop device and emergency stop device for safety. 8 The electrical design theory conform to the TWO ROLL MILL specifications strictly . It is equipped  ...

Machine Type Electrode Inverter Welding Rectifier Böhler brand Type Uranos 1500 Connection voltage 1 x 230 Volt Setting range 5 – 150 amps Duty cycle 30 % ED at 150 Ampere 60% ED at 125 amps 100% ED at 110 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Version portable mounting system Fuse 16 amps Dimensions L x W x H 260 x 120 x 190 mm Weight 3 kg Age 6 months Special accessories carrying strap Condition workshop tested, as new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece ground cable 1 piece electrode cable 1 piece hand shield 1 piece attachment glass 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy version 1 piece steel wire brush, 2 rows 30 piece rod elec ...