We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,260 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.
used
number of controlled axis: 6 workpiece weight: Unbkt kg throat: bis 8000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
This KUKA KR700 PA was manufactured in 2021. Originating from Germany with a load capacity of 700 kg and a reach of 3320 mm, it weighs 33850 kg and is powered by the compact KR C4 controller. It is in a excellent condition as it was not put into operation. This KUKA KR700 PA machine we have for sale represents a valuable addition to any production line. For further information, please contact us.
used
injection molding machine:2.500-5.000 kN demoulding stroke:650 mm max. manipulateable mass:5.000 g X-axis:650 mm Y-axis:1200 mm :3000 mm C - 90 °, pneumatic S - 15mm 2 x gripper 1 x pneumatic No separate safeguarding equipmant, must be protected by the machine! Adapter: 2 x 450mm high, 140x140mm, 535x815mm (M24) Payment terms: 100% prior to delivery
used
injection molding machine:800 kN demoulding stroke:120 mm max. manipulateable mass:1.500 g X-axis:120 mm Y-axis:500 mm :Schwenkachse mm Payment terms: 100% prior to delivery
used
Description X axis: 1500 mm Y axis: 500 mm Z axis: 1000 mm Motors: Brushless Clamp tilting: 90 ° Approximate size of the press (tons): Up to 200 Tons Max load: 5 Kg Euromap: 67
used
Description Sprue Taker Manipulator X axis: 100 mm Y axis: 700 mm Z axis: 45°- 90° Engines: no - Pneumatic axles Gripper rotation: Yes together with Z axis Clamp tipping: No Sprue clamp: Yes Voids: 1 Gripper control: Yes Euromap 12
used
Description X axis: 2085mm Y axis: 1225mm Z axis: 690mm motors: brushless gripper rotation: no caliper overturning: yes Sprue clamp : no empty : 1 gripper control: no max capacity: 10 kg Euromap 12
used
Description X axis: 500 mm Y axis: 1800 mm Z axis: 1100 mm motors: brushless gripper overturning: 0 ° -90 ° indicative size of the press (ton): 150/300 max load: 5 kg euromap: 12
used
Description X axis: 2000 mm Y axis: 1600 mm Z axis: 1100 mm motors: brushless caliper rotation: 90 ° indicative size of the press (ton): up to 500 ton max load: 17 kg
used
Description X axis: 700 mm Y axis: 2500 mm Z axis: 1400 mm motors: brushless pneumatic gripper rotation: 90 ° press interface: EU 12
used
Description X axis: 2525 mm Y axis: 1135 mm Z axis: 1505 mm motors: brushless caliper rotation: 90 ° keypad: P380 4.5
used
Unused Control UNIROB B4 (8.4 TFT touch screen) X axis=1000 (39.4) with servo motor Y axis=1000+1000 (78.7) with servo motor Z axis=4000 (127.5) with servo motor Movement interpolation. Repetition accuracy of +/- 0.1 mm. Maximum weight including gripper: 20 kg. Pneumatic pressure: 6 bars Maximum speed: 3,000 mm/s. Interface: EUROMAP 67 - Interface: EUROMAP 67 - Control: UNIROB B4 - Stroke (X): 1.000 (39,4) with servo mm - Stroke (Y): 1.000+1.000 (78.7) with servo mm - Stroke (Z): 4.000 (127,5) with servo mm - Take-out speed: 3.000 mm/s - Payload: 20 Kg
used
used
Description X axis: 2500 mm Y axis: 435 mm Z axis: 1000 mm Motors: Brushless Overturning: 90 ° N ° 1 Empty
used
- 7 axis - Complete cell sytem working on a CNC Punching Machine - Turn table sheet device - Fully automatic loading and unloading device - Safety fence Original cost of 100.000 EUR
used
Description X axis: 2500 mm Y axis: 435 mm Z axis: 1000 mm Motors: Brushless Overturning: 90 ° N ° 1 Empty
used
Description X axis: 1000 mm Y axis: 1200 mm Z axis: 4000 mm motors: brushless caliper rotation: 90 ° indicative size of the press (ton): up to 150 ton max load: 2 kg
used
Description Automation for loading IML molding labels: - Bank for loading labels - Conveyor belt for finished pieces evacuation
used
- ENGEL ER-IS Interface. - Prepared for CC300 Control - Compatible with machine: VC from 28 to 220t EM from 30 to 160t EMC from 50-180t - 1 x vacuum circuit - 1 x compressed air circuit - Compatible machine: VC88-220, EM30-160, EMC50-180 t - Stroke (X): 400 mm - Stroke (Y): 800 mm - Stroke (Z): 1.400 mm - Payload: 5 Kg - Driving method: X, Y, Z: servo, C: pneumatic
used
Description Bank for loading labels
LINEAR AXLE:. - Number of moving slides:2 DIMENSIONS / WEIGHTS:. - space requirements length:15000 mm
used
Description X axis: 800 mm Y axis: 2000 mm Z axis: 1650 mm motors: brushless gripper rotation: no vacum circuits: YES clamp control circuits: YES indicative size of the press (ton): 300-600 max flow rate: 8 kg
used
Description X axis: 1000 mm Y axis: 2500 mm Z axis: 1050 mm motors: brushless gripper rotation: no vacum circuits: YES clamp control circuits: YES indicative size of the press (ton): 300-600 max capacity: 15 kg
used
Description X axis: 800 mm Y axis: 2000 mm Z axis: 1650 mm motors: brushless gripper rotation: no vacum circuits: YES clamp control circuits: YES indicative size of the press (ton): 300-600 max flow rate: 8 kg
used
Description X axis: 1000 mm Y axis: 2500 mm Z axis: 1050 mm motors: brushless gripper rotation: no vacum circuits: YES clamp control circuits: YES indicative size of the press (ton): 300-600 max capacity: 15 kg
LINEAR AXLE:. - Number of moving slides:2 DIMENSIONS / WEIGHTS:. - space requirements length:7000 mm
used
Description X axis: 0-90° Y axis: 690 mm Z axis: 100 mm engines: no pneumatic caliper rotation: yes caliper overturning: no Sprue clamp: yes empty: no indicative size of the press (ton): 150 tons max capacity: 2 kg Euromap 12
used
Description X axis: 0-90° Y axis: 690 mm Z axis: 100 mm engines: no pneumatic caliper rotation: yes caliper overturning: no Sprue clamp: yes empty: no indicative size of the press (ton): 150 tons max capacity: 2 kg Euromap 67
used
Description X axis: 0-90° Y axis: 690 mm Z axis: 100 mm engines: no pneumatic caliper rotation: yes caliper overturning: no Sprue clamp: yes empty: no indicative size of the press (ton): 150 tons max capacity: 2 kg Euromap 67
used
Description X axis: 0-90° Y axis: 690 mm Z axis: 100 mm engines: no tyre caliper rotation: yes caliper overturning: no Sprue clamp: yes empty: no indicative size of the press (ton): 150 tons max capacity: 2 kg Euromap 67
LINEAR AXLE:. - Number of moving slides:1 DIMENSIONS / WEIGHTS:. - space requirements length:5000 mm
used
Description X axis: 1163 mm Y axis: 2420 mm Z axis: 3095 mm motors: brushless Y axis / asynchronous X and Z axes caliper rotation: yes caliper overturning: yes Sprue clamp: no empty: 2 gripper control: no indicative size of the press (ton): 400 tons max load: 10 kg Euromap 12
used
Description X axis: 970 mm Y axis: 1860 mm Z axis: 6000 mm motors: brushless caliper rotation: no clamp overturning: yes 90° Sprue clamp: no empty: 2 gripper control: yes indicative size of the press (ton): 550 tons max capacity: kg 15 Euromap 67ù New Z axis bearings New Y axis balancing cylinder
used
Description Sprue unloading manipulator Y axis: 360 mm mechanically adjustable - 500 mm pnumatically Z axis: 350 mm mechanically adjustable - 100 mm pneumatically pneumatic axles clamp control: yes indicative size of the press (ton): 65 tons max capacity: 0.1 kg Euromap 12
LINEAR AXLE:. - Number of moving slides:3 DIMENSIONS / WEIGHTS:. - space requirements length:24000 mm - total weight approx.:10100 kg
used
Technical description : - RAPID ACTION DOOR - Height = 2000mm - Width = 1800mm
used
Technical description : - RAPID ACTION DOOR - Height = 2000mm - Width = 2000mm
used
DIMENSIONS / WEIGHTS:. - total height:1000 mm
used
DIMENSIONS / WEIGHTS:. - total height:900 mm
used
DIMENSIONS / WEIGHTS:. - total height:900 mm
used
DIMENSIONS / WEIGHTS:. - total height:900 mm
used
DIMENSIONS / WEIGHTS:. - total height:1000 mm
used
DIMENSIONS / WEIGHTS:. - total height:35 mm
used
DIMENSIONS / WEIGHTS:. - total height:1000 mm
used
DIMENSIONS / WEIGHTS:. - total height:35 mm
used
DIMENSIONS / WEIGHTS:. - total height:900 mm
used
DIMENSIONS / WEIGHTS:. - total height:35 mm
used
DIMENSIONS / WEIGHTS:. - total height:1000 mm
used
DIMENSIONS / WEIGHTS:. - total height:1000 mm