robot welding used for sale

FANUC Arc Mate 100iC robotic welding station was built in 2019. The system configured for fully automatic MIG/MAG welding of workpieces is the perfect solution for the production of e.g. electrical cabinets, metal structures or agricultural equipment. The machining process is performed by a powerful industrial robot which, in combination with a rotary table, enables the machining of workpieces with even the most complex shapes. All the components of the workstation are integrated inside a single structure, making it easy to install or reposition. The MOTOFIL ROBOTICS MONOBLOC MCT1110 robotic welding station consists of the following parts: – robot arm: FANUC Arc Mate 100iC – controller: FANUC SYSTEM R-30iB – welding source: KEMPPI A7 MIG Power Source 450 – welding positioner – wire feeder: KEMPPI A7 MIG Wire Feeder 25-LH-EUR – ABICOR BINZEL torch cleaning device with ...

Inv. Num. : 8389 Type: 2x ABB IRB 2400L Producer: Robolution Created: 2006 Parameters: Control system: IRC5 Door height: 2800 mm Door opening: 2800 x 2200 mm Machine weight: 5500 kg Height: 2200/3100 mm Width: 3750 mm Length: 5700 mm Equipment: Touch Screen The robot cell consists of: 2x ABB IRB 2400L Robot 2 x lathe (robot welding on one side of the table and the operator loads the material on the other side of the table) Welding power sources: 2x Fronius TPS 4000 Equipment for welding wires with diameters of 1 and 1.2 mm Burner

Robot travel path: 5000mm, arm length: 2500mm, lift: 1000mm, spin radius: 2200mm, L-manipulator load capacity: 2000kg, lift velocity: 0,85m/min, swing speed: 1,7/min, turn speed: 6/min. Roboter type: IGM RTE 497-S in hanging position, control: full digital PC-Robotcontrol, Type RCE, software: WIN 10 & Linux based System + igm Robotsoftware K6, welding process: 135 (GMAW), single-wire, Ø1,2mm, welding power source: digital Invert Welding Power Source TPS 500i (500A at 40% duty cycle), robot periphery: rotating boom for floor installation with 2,5m boom length, number of working stations: 1, working station: 3-axis L-Manipulator with lifting device with 2t nominal load capacity, security Technology: Pistol-Security-Shut-down in wrist axis, emergency Stop on Handtablet, on Manipulators and Control Panel, three-coloured warning light for the operating Status partition, security Door. machin ...

current capacity: . kVA number of controlled axis: . workpiece weight: . kg : 50 zehn verschiedene Vers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An automatic Lorch welding machine including vacuum pump and traverse is available. Current: 230V, power: 100W, min. material thickness: 5mm, vertical/horizontal pulling force: 150N/350N, vertical/horizontal speed: 1100mm/min/1200mm/min, machine dimensions X/Y/Z: approx. 450mm/670mm/370mm, weight: approx. 25kg. Documentation available. On-site inspection is possible.

Two identical Yaskawa robots are available for the welding process. Payload: 6kg, reach: approx. 1350mm, axes: 6, repeat accuracy: +/-0.08mm, weight: approx. 130kg. An on-site inspection is possible.

KAWASAKI BA006L-A robotic welding station was built in 2022. This system, composed of devices and machines with the best technical parameters, is the perfect choice for fully automatic arc welding using the MIG/MAG method. All the components of the station are integrated inside an enclosed structure. The machining process is performed by a KAWASAKI 6-axis robot distinguished by, among others, its sophisticated design and robust arm with an increased range of movement. In order to achieve excellent dynamic movements combined with high process reliability, each of its six axes is driven by efficient servo motors. What’s more, a number of state-of-the-art systems ensure uninterrupted operation of the machine, without any downtime. The entire workspace is ventilated from welding fumes by powerful KEMPER extraction units. This solution significantly improves overall safety and comfort ...

KAWASAKI BA006L-A robotic welding cell was built in 2021. The system is designed for fully automatic MIG/MAG arc welding. All the necessary equipment and machinery with the best technical specifications are integrated inside an enclosed, fully ventilated structure. The robotic welding station consists of the following components: – robot arm: KAWASAKI 3BA006L-AC01 – welding positioner: ASTOR PST250E-H1 (2 pcs.) – MIG/MAG welder: FRONIUS TPS 400i – wire feeder: FRONIUS WF 25i REEL R /4R/G/W – push-pull drive unit: FRONIUS WF 60i Robacta Drive CMT/W – cooling unit: FRONIUS CU – welding fume extraction unit: KEMPER FilterCell XL (2 pcs.) – light curtains: SICK – fixed covers with safety switch The machining process is performed by a KAWASAKI 6-axis robot, distinguished by its sophisticated design and robust arm with an increased range of movement. It coopera ...

Inv. Num. : 8642 Type: ROMAT 350 ROTOL Producer: CLOOS Created: 2007 Parameters: CLOOS Welding Robot Workstation allows welding in the MIG/MAG process alternately at three workstations. Currently, only two are used: One is equipped with a two-axis positioner for fixing the welded part with the possibility of a horizontal axis of rotation with support the second is equipped with the same positioner without support the third workstation is not equipped with a positioner. For an optimal work process, 11 programming axes are available.

YASKAWA MOTOMAN AR 2010 robotic welding station was built in 2022 in Japan by Yaskawa Electric Corporation. The system is used for precision arc welding of workpieces with even the most complex geometries. All the components of the station are integrated inside an enclosed structure. The robotic welding cell is fully complete and consists of the following components: – robot arm: YASKAWA MOTOMAN AR2010 – controller: MOTOMAN YRC1000 – welding positioner: YASKAWA H-2000D (2 pcs.) – welder: LORCH – light curtains: PANASONIC – torch cleaning station: BRG-2000 D – control panel The machining process is performed by a YASKAWA 6-axis robot, which is distinguished by, among others, its clever design and robust arm with an increased range of movement. Its compact, slightly curved design enables efficient working in a small amount of space without the risk of collision w ...

A complete welding system with a robot and peripheral equipment is available. Welding stations: 2, robot travel path: 11000mm, max. workpiece diameter left/right: 2200mm, max. workpiece length left: 4000mm, workpiece length range right: 1000mm-5000mm, welding process: TIG, materials: aluminum/stainless steel, shielding gas: argon, overall system dimensions X/Y/Z: approx. 15350mm/5700mm/4000mm, control unit: Qirox QC2 Advanced. Including suction technology. Documentation available. An on-site inspection is possible.

A welding system with a KUKA robot and a rotary device is available. Payload: 15kg, repeatability: ±0.1mm, reach: 1570mm, axes: 6, weight: approx. 225kg. An on-site inspection is possible.

Inv. Num. : 8737 Type: NX 100 Producer: MOTOMAN Created: 2008 Parameters: The workplace consists of the following components: 2 Yaskawa NC100 robots TPS5000 welding power sources Fronius air purifier 2x Single Column Positioner (Dekona 101) 1x double column and single axis positioner

Inv. Num. : 8813 Type: IRB 2400 Producer: ABB Created: 2011 Parameters: Hours: 22152 h Maximum arm reach: 1500 mm Maximum load capacity: 10 kg Machine weight: 150 kg

Inv. Num. : 8814 Type: IRB 2600 Producer: ABB Created: 2014 Parameters: Operating hours: 5162 h Maximum arm reach: 1650 mm Maximum load capacity: 12 kg Machine weight: 150 kg

A fully overhauled automatic welding station Cloos from the year 2025 is available. Robot type: Romat 320, welding power source: GLC 353 MC3 R, control system: Rotrol II fibre optic, welding process: MIG. Load capacity: 15kg, robot axes: 6, reach: 3200mm, repeatability: +/-0.1mm, power: 25kVA, total weight: approx. 600kg. Documentation available. An on-site inspection is possible.

A completely overhauled automatic welding station Cloos from the year 2025 including two rotary tables is available. Robot type: Romat 350, welding source: GL 300 IHPR, control system: Rotrol II, welding process: TIG. Rotary table load capacity: 2x250kg, rotary table type: WPEK-DP-KP-2.5kN, axes: 6+2+2. Documentation vorhanden. An on-site inspection is possible.

Inv. Num. : 8857 Type: IRB 6400 M98 Producer: ABB Created: 2003 Parameters: Maximum arm reach: 2400 mm Number of axles: 6 pieces Maximum load capacity: 120 kg Machine weight: 2030 kg

KUKA KR 8 R2100-2 arc HW robotic welding station was built in 2021 in Germany by KUKA Deutschland GmbH. The system is designed for precision welding of workpieces with even the most complex geometry. All the necessary components are integrated inside the modular design, enabling the workstation to be adapted accordingly to current production needs. The workpiece welding process is performed by a KUKA 6-axis robot from the KR CYBERTECH ARC series. The machine is distinguished by its compact design, which provides a high degree of movement freedom even in hard-to-reach places. To avoid any collision of cables with other station components, they were routed inside the robot arm. All this is complemented by an easy-to-use controller with a range of additional functions. During automated welding, dynamic and accurate feeding of the welding wire is very important. To achieve this, a reli ...

A complete Severt robotic welding system is available. Travel path X: 8000mm, robot axes: 6, stations: 2, axis positioners: 2, positioner speed: 6rpm, positioner load capacity: 1000kg, faceplate torque: 1000Nm, power source: OTC DP 500, power output: 350A. Including seam tracking sensor, push-pull torch, hose packages, wire guide spirals, contact tips, gas nozzles and additional items. Documentation vorhanden. On-site inspection is possible.

Manufacturer: Servent Model: OTC-IRB-AX-V 6 L Year of Manufacture: 2006 Machine Type : Welding robot System type: Robotic MIG/MAG welding system MIG/MAG power source: OTC DP 400 Positioners: 2 x S40.1-4 / 1000 kg Linear track with gantry: S80.1-4 / S70.1 Travel length: 8000 mm Electrical connection: 3/N/PE, 400 VAC, 50 Hz, 100 A CE marked System configuration: - Overhead-mounted 6-axis robotic arm on 8 m linear track - Robot controller: OTC Daihen - Control software upgraded from AX-C to AX-2 - 2 welding stations - Each station equipped with 1-axis positioner - Positioner load capacity: 1000 kg - Positioner torque: 1000 Nm Welding equipment: - Power source: OTC DP 500 - Duty cycle: 100% at 350 A - Duty cycle: 60% at 500 A - Push-pull welding torch - Water-cooled gas nozzle - Wire feeding via roller liner - Torch alignment gauge included Sensors and automation: - Touch sen ...

Inv. Num. : 6169 Type: Motoman DX 100 Producer: YASKAWA Created: 2011 Parameters: Switch-on hours: 12800 h Operating hours: 6000 h Axle number: 6 Max. horizontal reach: 1717 mm Min. vertical reach: 3063 mm Maximum load: 20 kg

Inv. Num. : 8913 Type: IRB 1600/1.45-8/M200 Producer: ABB Created: 2013 Parameters: Maximum arm reach: 1450 mm Number of axles: 6 pieces Maximum load capacity: 8 kg Machine weight: 250 kg

Inv. Num. : 8914 Type: MA 1400 - DX 100 Producer: Yaskawa Created: 2012 Parameters: Maximum arm reach: 1434 mm Number of axles: 6 pieces Maximum load capacity: 3 kg Machine weight: 130 kg

This KOVACO SP 50 DP was manufactured in 2015. It features a robust welding positioner with a table size of 1200x1800 mm and a capacity of 5000 kg. The stroke reaches up to 1200 mm, and it offers a tilt range of 0-90 degrees and full table rotation from 0-360 degrees. Consider the opportunity to buy this KOVACO SP 50 DP welding robot. Contact us for more information about this machine.

This 6-axis FANUC ARC Mate 100iC welding robot was manufactured in 2011. Ideal for precision welding tasks, it offers robust construction and reliable performance. If you are looking to get high-quality welding capabilities, consider the FANUC ARC Mate 100iC machine we have for sale. Contact us for more information.

This 6-axis CLOOS QRC 350 QIROX welding robot was manufactured in 2016. It features a maximum load capacity of 15 kg, a workstation reach of 3400 mm, and advanced V6 control. Equipped with a 450A Qineo Pulse A welding machine, it ensures precise and efficient welding. The robot includes a touch sensor and an arc sensor for enhanced accuracy during operations. Consider the opportunity to buy this CLOOS QRC 350 QIROX welding robot. Contact us for more information about this machine.

This CLOOS QIROX QRC 350-E was manufactured in 2019. It features a maximum payload of 15 kg and a working range up to 4500 mm. Equipped with a QC 2 Master control system, it includes a handheld programming device with an 8.4 touchscreen. The robot supports expansion up to 12 axes and comes with integrated welding software and a digital interface. Consider the opportunity to buy this CLOOS QIROX QRC 350-E welding robot. Contact us for more information about this machine.

This 6-axis FANUC M-16iB robot arm was manufactured in 2005. Ideal for automation tasks, it enhances precision and efficiency in operations. Consider the opportunity to buy this FANUC M-16iB robot arm. Contact us for more information.

This CLOOS Instant pro IRPS was manufactured in 2023. It features a QIROX welding robot with a maximum payload of 10 kg and a working range of Ø 3900 mm. Equipped with advanced QC 2 control system, it includes a programming handheld device and supports new tandem leading/trailing processes. Ideal for high-quality welding applications, it also comes with a comprehensive set of welding and sensor technologies. Contact us for more information about this machine.

This 5-axis OTC Daihen NH52-NEFC robot arm was manufactured in 2018. Ideal for complex welding tasks, it offers precision and flexibility in various applications. Consider the opportunity to buy this OTC Daihen NH52-NEFC robot arm. Contact us for more information.

A complete IGM welding system with robot is available. Robot: IGM RTI 2000, roller stand: IGM RB 300, positioner: IGM RP 300, control system: PLC/KUKA K C2, total system dimensions X/Y/Z: approx. 5250mm/4000mm/2800mm, drive time: 31091h, welding hours: 12930h, waiting time: 99278h, total time: 113051h. Without workpiece fixtures. The 6th axis of the machine can no longer be controlled. Documentation available. An on-site inspection is possible. Expected to be available in May 2026.

This CLOOS QRH 390 was manufactured in 2013. It features a QRH 390 with a QIROX Controller V6 and a C-stand MH=24330. Equipped with advanced welding technology and an extraction system, this welding robot is ideal for enhancing your production capabilities. Contact us for more information about this machine.

This 6-axis REHM COMPACT-ARC 200 VM was manufactured in 2015. It features a robust welding robot cell, operating on 3 × 400 V AC with a mains frequency of 50 Hz. It can handle a maximum workpiece weight of 200 kg and requires 6 bar compressed air. Dimensions are 3990 × 2020 × 2300 mm, weighing 1720 kg. Consider the opportunity to buy this REHM COMPACT-ARC 200 VM welding robot. Contact us for more information.

A robot-assisted welding system from Cloos with a Kuka robot is available. Robot weight: 1155kg, control system: Qirox C Romat 520, control weight: 300kg, robot axes: 6. Documentation available. An on-site inspection is possible.

YASKAWA MOTOMAN AR2010 robotic welding station was built in 2020 in Japan by Yaskawa Electric Corporation. The system is specially designed for precision arc welding of workpieces. The machining process is performed by a YASKAWA 6-axis robot, distinguished by, among others, its clever design and robust arm with an increased range of movement. An arm reach of 2010 mm and a payload of 12 kg enable the welding of large and complex structures, while maintaining a high dynamic and repetitive process. Thanks to its compact, slightly curved design, the robot achieves excellent efficiency even in a small amount of space. This solution also eliminates the risk of collision with the workpiece or peripheral equipment. Each of the six axes is driven by powerful servo motors in order to achieve excellent dynamic movements combined with high process reliability. All cables, on the other hand, are r ...

Inv. Num. : 9039 Type: QIROX QRC 350 Producer: CLOOS Created: 2017 Parameters: Control System: V6-9 Advanced Maximum arm reach: 3400 mm Maximum load capacity: 15 kg The workstation consists of 3 stations and the following components: CLOOS QIROX QRC 350 robot Track Optical barrier Workpiece Positioner

Inv. Num. : 9046 Type: ES 200D Producer: Motoman Created: 2010 Parameters: Maximum arm reach: 2651 mm Number of axles: 6 pieces Maximum load capacity: 200 kg Machine weight: 1130 kg

KUKA KR 30 L16-2 robotic welding station was built in 2017 in Germany by KUKA Roboter GmbH. The welding station has been specially designed for the precision welding of structural components with even the most complex geometries. All the necessary equipment and machinery with the best technical specifications were integrated inside a cell with service doors and light curtains. This created a complete, fully-automated system that significantly speeds up production, increases weld repeatability and reduces downtime to a minimum. The machining process is performed by a KUKA 6-axis robot, distinguished by, among others, its clever design and robust arm with an increased range of movement. The arm’s reach of 3102 mm and a payload of 16 kg enable the welding of large and complex structures, while maintaining a highly dynamic and repetitive process. During automated welding, dynamic and ac ...

FANUC M-710iC/12L robotic welding station was built in 2014 in Japan by Fanuc Corporation. All components of the welding station are brand new. It has never been in operation after purchase. The FANUC M-710iC/12L is a state-of-the-art welding system designed for automated arc welding of structural components with even the most complex geometries. The machining process is performed by a FANUC 6-axis robot, distinguished by, among others, its clever design and robust arm with a large range of movement. The arm’s reach of 3323 mm and a payload of 12 kg enable the welding of complex workpieces, while maintaining a highly dynamic and repeatable process. Directly on the machine body, a reliable LINCOLN ELECTRIC wire feeder is placed, which ensures dynamic and accurate feeding of the welding wire. The welding torch, in turn, is automatically cleaned at predetermined intervals by the ABICOR ...

Manufacturer: Fanuc Model: ARC Mate 100ic 8L Year of Manufacture: 2015 Type of Machine : Welding Robot Condition: Used Technical Specifications - Number of axes: 7 - Reach: 2,200 mm - Controller: Fanuc System R-30iB - Welding system: Kemppi KempArc Puls 450 System Dimensions - Length: 11,000 mm - Width: 5,000 mm - Height: 2,500 mm - Robot rail travel: 7,500 mm Included with the Machine - Full protective enclosure of the system as shown in photos - Rotary positioner (Drehtisch) included - Software for offline programming included - On-site operator training available on request - Dismantling support provided - loading assistance available on site Find more here - / Contact us at -

COMAU SMART H1 ROBOTIC ARM Wrist load 125 kg Maximum reach 2401 mm Repeatability +/- 0.3 mm Brushless AC Motors Power 7 kw CONTROL UNIT FOR ROBOTS COMAU SMART-3 6.125 Three-phase power supply 380V - 500V Power 7.0 kVA Breaking capacity 7kA/500V GEM WELDING CONTROL UNIT Voltage 400 V 3 Steps Frequency 50 Hz Max power 480 kVA DISMANTLING AND LOADING COST: EURO XXXXXXXXXX Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-19

ROBOTIC ARM ABB IRB 1600 6/1.45 Wrist load 6 kg Maximum reach 1450 mm Repeatability +/- 0.02 mm ABB IRBP R300 POSITIONER Max load capacity 300 kg Max rolling diameter 1000 mm Distance between tailstocks 1600 mm WELDING POWER SOURCE FRONIUS TPS 500i Max welding current 500A Operating voltage 14.2 - 39.0 V Frequency 50 / 60 Hz Max power 480 kVA WIRE FEEDER FRONIUS WF 25i R Wire speed 1 - 25 m/min Wire diameter 0.8 - 1.6 mm 4 rollers Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-20

Robot stud welding robot for thread M5 (convertible) KUKA KR 180 KRC2 complete Control: KRC2 Number of axes: 6 Max. load capacity: 180 kg Max. working range: approx. 2700mm Year of Make: 2003 Scope of delivery: robot, controller, cable, teachpanel, circuit diagrams, stud welder In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Double-workstation robotic welding system, built in 2007, consisting of KUKA robot, INE welding machine, KUKA KR C2 controller, steel supporting structure for robot suspension, motorized positioners, control cabinet and service components. The system is CE marked from the factory and is complete with manuals and technical documentation available. The robot is functional, currently turned off for a few months due to lack of use. Verification/overhaul by qualified technical personnel is recommended before recommissioning. Large system, suitable for metal carpentry and automated welding on a double workstation. Auction-ID: A7-47032-1

Offered is a robot-assisted laser welding system with fiber laser. Robot radius approx. 2000mm on linear axis, robot manufacturer: laser type: ytterbium fiber laser YLS, number of axes: 6 + linear travel axis, application: laser welding and surface processing, extraction: Plymovent extraction arm, control: KRC. Equipped with YLS laser source, linear axis, processing optics, Plymovent extraction, system table, control cabinet. Accessories: wire feeder: EWM Phoenix Drive 4 Rob MF. Weight: approx. 3500kg, overall dimensions X/Y/Z: approx. 5000mm/3000mm/2800mm. Inspection possible by arrangement.

TIG Welding Machine, Electric Welding Machine KESTRA Type TIG 350 AC/DCE Welding MachineFabr. No. 09720693 Year of construction approx. 1985Power 350 Amp. = 60 % EDExsetting range 3 steps and fine adjustmentCurrent type AC / DCNet connection 400 volts, 50 Hz, 32 Amp. Plug- 4 meter hose package with TIG torch- 2 stroke / 4 stroke welding device- Water-cooled- Gas pressure reducing valveSpace requirement L x W x H 1050 x 560 x 900 mmWeight 250 kgThe welding test gives good results when welding stainless steel with