robo used for sale

This ABB IRB 4600 M2004 Robot was manufactured in the year 2021 in Sweden. It is equipped with a IRC5 M2004 and has 6 axis. The machine has a Reach of 2.55 meters and a payload of 40 kg.

This KUKA KR60 HA - KRC2ed05 Robot was manufactured in the year 2011 in Germany. It is equipped with a KUKA control unit. The machine has a reach of 2033 mm.

This Yaskawa Motoman YR-MPL0160-B04 Robot was manufactured in the year 2010 in Japan. The machine has a payload of 160 kg.

Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.

This ABB IRB 460-110/2.4 Robot was built 2020 in Sweden. It operates with 4-axis, 110kg of payload and 2400mm of reach. At its current location there are 4 units available. The robots are not in production anymore and ready for immediate availability. Single unit and pack purchase options are possible.

This MITSUBISHI PR-5AH Robot was manufactured in the year 2004 in Germany. The machine has 3 axis. Includes full documentation of the associated software and a software CD, gripper arm, control unit, remote control.

This ABB IRB1600 Robot was manufactured in the year 2016 in Sweden. The machine has a hand capacity of 10 kg.

Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.

This Kuka LBR iiwa 7 Robot was made in 2022 in Germany. It has a nominal payload of 7 kg, a maximum reach of 800 mm, and 7 axes. The front flange has both pneumatic and electrical connections (MF Pneumatic). See original offer with all technical positions as PDF (German) attached.

This YASKAWA MA2010 Welding Station Robot was manufactured in the year 2019 in Japan. It is equipped with a Lorch S8 RoboMig XT control unit and with a DX200 Master controller. The machine dispose of a Torch cleaner (BRG2000D) and 2 positioners (DK-2500-R1000) with Servo tracks (FB500).

This IGM Welding Robot System was manufactured in the year 2006 in Germany. It is a complete system with robot (KUKA), 2x manipulator, welding machine and extraction system. The first system is available in July 2024 and the second is still in operation until August 2024.

Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.

This ABB IRB140 - IRC5 Robot was manufactured in Sweden in 2008.

This Kuka Kr16 Robot was manufactured in the year 2006. It is equipped with a Kuka KRC Software control unit.

Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.

This Epson G6-653S Robot was made in the year 2017 in Japan. It has a max payload of 6 kg.

This ABB IRB 4600 Robot was built in 2002. The robot has a reach of 205 cm and a capacity of 60 kg. Is new, never used.

This YASKAWA 6VX88 Robot machine was manufactured in the year 2020 in Japan. It is equipped with 6 axis and has a safety control (YRC100).

Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.

This Fruitcore HORST 1400 Robot was manufactured in the year 2021 in Germany. It has 6 axis. The machine has a maximum load capacity of 10 kg.

Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.

PROJECT PALLETIZING SYSTEM FOR BUCKETS KUKA palletizing robot with 3-fold gripper for bucket and bucket receiving tape - 1 KUKA robot - KR 210 with KRC2 - 2 bucket positioning belts with centering - 2 pallet fixing frames - 1 fencing of the robot cell incl. safety light curtain

number of controlled axis: 6 workpiece weight: Unbkt kg throat: bis 8000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

injection molding machine:2.500-5.000 kN demoulding stroke:650 mm max. manipulateable mass:5.000 g X-axis:650 mm Y-axis:1200 mm :3000 mm C - 90 °, pneumatic S - 15mm 2 x gripper 1 x pneumatic No separate safeguarding equipmant, must be protected by the machine! Adapter: 2 x 450mm high, 140x140mm, 535x815mm (M24) Payment terms: 100% prior to delivery

Welding robot make KUKA type KR 6 ARCYear of construction 2008Technical specifications:Load capacity 6.0 kgNumber of axles 6Repeatability +-0.1mmMax Reach 1823.5mmWeight around 235 KGWith- Control KR C2used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

injection molding machine:800 kN demoulding stroke:120 mm max. manipulateable mass:1.500 g X-axis:120 mm Y-axis:500 mm :Schwenkachse mm Payment terms: 100% prior to delivery

Palletizing robot for bags or similar products. Here performance at 30%

This KUKA KR700 PA was manufactured in 2021. Originating from Germany with a load capacity of 700 kg and a reach of 3320 mm, it weighs 33850 kg and is powered by the compact KR C4 controller. It is in a excellent condition as it was not put into operation. This KUKA KR700 PA machine we have for sale represents a valuable addition to any production line. For further information, please contact us.

REIS gantry robot with substructure 1.8 m high, x approx. 10 m, y approx. 1 m, e.g. approx. 1 m 4-axis robot, very good condition, was only 4 years in operation.

This EPSON G10 854P Robot was manufactured in the year 2021 in Japan. The machine has a Maximum payload of 10 kg.

Robot Nachi EZ03V4-02-4525 Wingslicer new and in original packaging year 2019 Ceiling EtherCAT End of 2018- beginning of 2019 Repeatability +/-0.014mm Max. load capacity: 3 kg Max. working range: approx. 450 mm in Z 250mm Scope of delivery : Robot,Controller,Cable,Teachpanel,Documentation 2 weeks start-up guarantee.No further warranty In addition, spare parts are always available from stock. Robot is fully functional and can be viewed Auction amount is ex works Free loading Auction amount is net. Export price. You will receive a proper invoice with VAT. If you have any further questions, please contact us by e-mail or phone

Description X axis: 1500 mm Y axis: 500 mm Z axis: 1000 mm Motors: Brushless Clamp tilting: 90 ° Approximate size of the press (tons): Up to 200 Tons Max load: 5 Kg Euromap: 67

Description Sprue Taker Manipulator X axis: 100 mm Y axis: 700 mm Z axis: 45°- 90° Engines: no - Pneumatic axles Gripper rotation: Yes together with Z axis Clamp tipping: No Sprue clamp: Yes Voids: 1 Gripper control: Yes Euromap 12

Description X axis: 2085mm Y axis: 1225mm Z axis: 690mm motors: brushless gripper rotation: no caliper overturning: yes Sprue clamp : no empty : 1 gripper control: no max capacity: 10 kg Euromap 12

Description Cartesian Robot With Double Vertical Axis X Axis Travel: 2500 mm Y axis stroke Product side: 850 mm Y axis travel on sprue side: 850 mm Z axis stroke Product side: 1500 mm Z Axis travel on Matarozza side: 1500 mm Gripper overturning: 90 ° Motors: AC servo motor Euromap 12

Unused Control UNIROB B4 (8.4 TFT touch screen) X axis=1000 (39.4) with servo motor Y axis=1000+1000 (78.7) with servo motor Z axis=4000 (127.5) with servo motor Movement interpolation. Repetition accuracy of +/- 0.1 mm. Maximum weight including gripper: 20 kg. Pneumatic pressure: 6 bars Maximum speed: 3,000 mm/s. Interface: EUROMAP 67 - Interface: EUROMAP 67 - Control: UNIROB B4 - Stroke (X): 1.000 (39,4) with servo mm - Stroke (Y): 1.000+1.000 (78.7) with servo mm - Stroke (Z): 4.000 (127,5) with servo mm - Take-out speed: 3.000 mm/s - Payload: 20 Kg

Description X axis: 500 mm Y axis: 1800 mm Z axis: 1100 mm motors: brushless gripper overturning: 0 ° -90 ° indicative size of the press (ton): 150/300 max load: 5 kg euromap: 12

Description X axis: 2000 mm Y axis: 1600 mm Z axis: 1100 mm motors: brushless caliper rotation: 90 ° indicative size of the press (ton): up to 500 ton max load: 17 kg

- 7 axis - Complete cell sytem working on a CNC Punching Machine - Turn table sheet device - Fully automatic loading and unloading device - Safety fence Original cost of 100.000 EUR

Complete palletizing system for trays. The facility consists of: ABB palletizing robot, gripping tool for parcels, pallet magazine, cardboard stacker, protective device and conveyor technology

Description X axis: 700 mm Y axis: 2500 mm Z axis: 1400 mm motors: brushless pneumatic gripper rotation: 90 ° press interface: EU 12

Description X axis: 2525 mm Y axis: 1135 mm Z axis: 1505 mm motors: brushless caliper rotation: 90 ° keypad: P380 4.5

Description

- ENGEL ER-IS Interface. - Prepared for CC300 Control - Compatible with machine: VC from 28 to 220t EM from 30 to 160t EMC from 50-180t - 1 x vacuum circuit - 1 x compressed air circuit - Compatible machine: VC88-220, EM30-160, EMC50-180 t - Stroke (X): 400 mm - Stroke (Y): 800 mm - Stroke (Z): 1.400 mm - Payload: 5 Kg - Driving method: X, Y, Z: servo, C: pneumatic

Palletizing system for sacks, trays or similar products. Kuka palletizing robot type: KR 180-2 PA Kuka was built in 2004, gripping tool and the recording tape are NEW

Description X axis: 3000 mm Y axis: 600 mm Z axis: 1000 mm motors: brushless collet rotation: 0 ° -90 ° press interface: Euromap 12 Robot previously installed on a 220 ton press.

5 axis robot: 3 axes driven by servo motors, A movement, C axis Rides in the following axes: X-550, Y-1200, Z-2000 The servo inverters are built into the Z axis crossbeam Touch control panel - Teach Box - Control: Teach Box - Stroke (Y): 1.200 mm - Stroke (X): 550 mm - Stroke (Z): 2.000 mm - Driving method: servo

LINEAR AXLE:. - Number of moving slides:2 DIMENSIONS / WEIGHTS:. - space requirements length:15000 mm

Description X axis: 2500 mm Y axis: 435 mm Z axis: 1000 mm Motors: Brushless Overturning: 90 ° N ° 1 Empty

Description X axis: 2500 mm Y axis: 435 mm Z axis: 1000 mm Motors: Brushless Overturning: 90 ° N ° 1 Empty