ro used for sale

60” x 22” Two Roll Mill Manuf.: Bridge UK With variable speed control Siemens S7 - 1200 Safety PLC. Danfoss 90kW 315 Amp Frequency Drive with Dynamic Braking Resistor Electromotor 90kW 980rpm Front Roll Speed max. speed (50Hz) 14.1rpm Manually adjustable guide plates Manual nip adjustment Failsafe Pneumatic Caliper brake for Emergency Stopping of Mill Flood cooled rolls with rotary unions fitted 8 outlet mechanical lubrication system to roll bearings David Brown gear box – ratio 980:65.1 High speed pinion / bull wheel drive to rolls Safety PLC control for Start up sequence and machine monitoring HMI fitted to main panel for status monitoring of machine Operation Controls – Rolls Stop / Rolls Start / Inch Reversetart / Inch

Built in 2009/2005 Size min. 100 x 120 mm Max 300 x 430 mm Thickness Film thickness 20-100 mµ Mechanical speed 25,000 CPH Equipment 10 stations rollstream ROS 1 VSE-ROS-ES-RE-300-KWE twin multi disc unwind station 4 MTD AWS OWK built in 2005 JET feeder 8 JEF-450-FVM SA190 built in 2005 foil wrapping machine CMC 2800 with two feeders built in 2009 twin stacker CMC

Lots of monobloc boring bars Rock drills and extensions from tunnelling unused and used - Diameter: 23 to 83 mm - Length: 500 mm - 5600 mm Manufacturer: ROCBO, SANDVIK, BÖHLERIT u.a. Cone Boring Rods, Monobloc Boring Rods and Extension Boring Bars The drills come from the bearing dissolution of a tunnel construction company and are mostly as good as new. See list for details Changes and errors in technical data, information and prices as well as prior sale. Number Description Description Addendum 3 cone boring bars length approx. 4,000 mm inserting end approx. 25x159 mm, as good as new 1 cone boring bar length approx. 5,000 mm Inserting end approx. 22x82 mm, as good as new 2 cone boring bars length approx. 1,000 mm Inserting end approx. 22x82 mm, as good as new 25 cone boring bars length approx. 2,400 mm inserting end approx. 25x159 mm, as good as new 18 c ...

New machine 24 months warranty Advantages: + TOP price-performance ratio + immediately available, approx. 3-4 working days delivery time + compact, powerful planetary mixer as table model + variable speeds adjustable via rotary knob + with plastic protective cover + Machine stands on 4 vibration-absorbing adjustable feet + Swivel head for easy removal of the boiler + available in 5 different colours + fast spare parts supply within 1-2 working days SERIEN accessories, included in the price: - 1x 7 litre stainless steel boiler - 1x whisk for 7 litre boilers - 1x flat stirrer for 7 litre boilers - 1x dough hook for 7 liter boiler SPECIAL ACCESSORIES, optionally available at extra cost: - additional 7 litre stainless steel boiler (surcharge: 65,-- € net) - additional tools: --- whisk (surcharge: 46,-- € net) --- flat stirrer (surcharge: 38,-- € net) --- dou ...

Claw jaw for blanks and saw parts. Only 2, 5mm loss of material. Length: 90, 125, 160, 200mm

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Roller conveyor/ conveyor conveyor / rollers Condition: Used Manafacture: Schulz Model: Rollers Total length: approx. 15750 mm overall width: approx. 1055 mm Rollers/ conveying width: approx. 995/ 1000 mm Propulsion: Gravity Plant consists of 7 segments Segment length: approx. 2250 mm Roll diameter: approx. 50 mm Roll spacing: approx. 150 mm Material: Steel Frame height: approx. 65 mm Frame width: approx. 25 mm Includes side guide Price per meter Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading you ...

Model SLP-15/O - available immediately! Memorized width 1200 x 1600 height x 1800 deep Dimensions 1720 width x 2410 height x 2100 deep Electric power supply Rated power 15 kW Voltage 380V Frequency 50-60 Hz Door type: 2 doors on one side Anti-ex Castle Warm-up time 15-30 min. (180 ° C) Uniformity & lt; ± 3 ° C, if 180 ° C Max & lt; ± 3 ° C Temperature of 230 ° C Max Transport: Horde carriage Air circulation fan Heaters removable roof heating panels Vertical circulation Fan mounted radially on removable panels Motor 1,1 kW 3456 L capacity Warranty 12 months GERMAN-SPEAKING CONTACT IN GERMANY JUST ASK THEM Shipping time: Immediately Shipping costs will be calculated individually. Also plants according to your wishes. More information under Romer Germany Electrostàtica pintura, pintura en pole, powder coating, Jauhemaalaus, muovijauhetta,  ...

gratings in stock, e.g.: 790 x 495 x 40 (approx. LxWxH), support rod 790 x 40 x 3 mm 950 x 510 x 40 (approx. LxWxH), support rod 950 x 40 x 3 mm 950 x 455 x 30 (approx. LxWxH), support rod 950 x 30 x 3 mm 1135 x 615 x 40 (approx. LxWxH), support rod 1135 x 40 x 3 mm and other gratings with other dimensions in stock. Price: €/st. 30,00 Heavy-duty gratings: Steel gratings 560 x 1185 x 70 (approx. LxBxH), Support rod 560 x 70 x 4 mm Payload: approx. 2000 kg 16 shares Price: €/st. 45,00 Location: Nuremberg Area

reverse soil tiller - 130 cm working width, right offset machine, three-point hitch cat. I, movable grilles roller 150 cm with scraper, 8 rows of blades, possible working depth 14 cm. Another reverse soil tiller 155 cm and soil tiller in stock!

Model SLP-15/O - available immediately! Memorized width 1200 x 1800 height x 1600 deep Dimensions 1720 width x 2610 height x 1900 depth Electric power supply Rated power 15 kW Voltage 380V Frequency 50-60 Hz Control: 7 "touch screen Door type: 2 doors on one side Anti-ex Castle Warm-up time 15-30 min. (180 ° C) Uniformity & lt; ± 3 ° C, if 180 ° C Max & lt; ± 3 ° C Temperature of 230 ° C Max Transport: Horde carriage Air circulation fan Heaters removable roof heating panels Vertical circulation Fan mounted radially on removable panels Motor 1,1 kW 3456 L capacity Warranty 12 months GERMAN-SPEAKING CONTACT IN GERMANY JUST ASK THEM Shipping time: Immediately Shipping costs will be calculated individually. Also plants according to your wishes. More information under Romer Germany Electrostàtica pintura, pintura en pole, powder coating ...

Article number: KB-1000 Brand: URB Model: NU2308E Year of constr.: Unused Stucco number in stock: approximately 4250 (2125 package x 2 pcs) Weight (kg) ca: 4080 NET / 4235 large Manufactured in: Romania Ã? diameter (mm): 40mm inside / 90mm outside Comments: Unused original packed bearings Price per kg (ex VAT): € 2.50

Double chamber vacuum packaging machine Röschermatic VM-42/2/C, MC control, all stainless steel, high performance vacuum pump, electronic control, inlet plates for height adjustment. You are very welcome to test the machine in our facility in Koblenz, Germany.

ROTOFLEX VLI 330 INSPECTION – SLITTER – REWINDER Machine information: Rotoflex products are proven in practical applications with self-adhesive labels, processing, blister foils, and all kinds of paper. This professional and heavy duty die-cutter with slitter/rewinder and label checking will rewind rolls in a perfect register with a max. diameter of 700 mms and a max. width of 330 mms into smaller sized rolls. During the process, the labels can be checked for quality and missing labels. Specifications:  Max. web width: 330 mms  Roll diameter: unwind: 700 mms / rewind: 400 mms  Shaft diameter: unwind: 76 mms / rewind: 76 mms  Max. speed: 230 m/min.  Slitter  Rewinder  Splice table Description: unwind with splice tables and clamps, web guide and tension control (including automatic web holder at stopping procedure), pressure controlled die- ...

Vemag Robot 500 vacuum filling machine / dough portioner, double screw System, for filling, portioning, linking, microcomputer control, filling capacity up to 2,500 kg/h You are very welcome to test the machine in our facility in Koblenz, Germany.

Linear unit, stroke 1028mm, RK Monoline Z 60, RK Rose+Krieger, used Top Used - top condition like a demonstration unit The part was removed from a pilot system that was only used for a short time and is in almost new condition. Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. The current price of a similar product is € 1980 excl. VAT. If you have a VAT number, we will gladly issue you an invoice without VAT. Technical data: - Linear unit RK Monline Z 60, with toothed belt drive, RK Rose+Krieger, - Incl. 2 tables 187 x 140mm, table 1 is driven, table 2 is freely movable - the 2nd table can be removed - Max. stroke when using one table = 1028mm - Variable positioning of the drive - Connection linear unit - Gearbox with backlash-free Rotex KTR claw coupling GS24 ...

Bergen Rolls Royce B35:40V20AG complete gas power plant Year of Make 2011 running hours: 16.380 Hours 8415 Kw 11kV 50 Hz at 750 RPM with AVK DIG 167 f/8 alternator 9100 kvA Complete power plant with all auxilaries: Control Air Compressor ,Self Demand Transformer, LT cooling water system, cooling tower, HT cooling water system, cooling tower, cooling fans, Start Air Compressors and Air tank, Natural Gas Regulator Unit, Emergency Diesel Generator 220 kVA, piping systems oil filter and heater exchangers, Neutral Earthing Resistor Unit, Generator Cooling Fans, Steam Boiler: Nooter/Eriksen Capacity: 5.5 T/h, Switchgear Units, engine tools, instruction manual and more... Please contact for more info and complete scope / offer

KÄRCHER ROBO 30 pipe boring machine for pipes, flat material and profiles With this machine, tubes, flat material or profiles can be cut very quickly and accurately in a single pass. can be drilled or milled at an angle or at an angle up to  50° in such a way that filling rods or filling tubes up to 1" can be drilled or milled can be plugged through. With the standard additional clamp for the jaw chuck, you can not only cut pipes, but also transport flat material or other profiles with the feed and at the desired angle up to over Make 50° single-sided holes or through holes. The clamping jaws in the self-centering vice have a recess at the top for flat material. We are unrivalled when it comes to converting to another material! The feed is positioned at 0.1 mm with the counter with absolute or chain gauge. With the ROBO 30, you don't need to set limit switches or cams for ...

82 MW Rolls Royce Trent 60 - NATURAL GAS TURBINE COMBINED CYCLE POWER PLANT -Rolls Royce USA, manufactured Trent 60 (SGT-A65) Gas Turbine Generator Set; Manufactured in 2016, delivered in August 2017 65.9 MW(e) ISO 43.8% Gross efficiency / 8,228 kJ/kWh Heat Rate DLE Dry Low Emissions with ≤ 25 ppmvd at 15% O2 on fuel gas Cold start to full power in under 10minutes 50Hz, but easily convertible to 60Hz Engine still preserved in original shipping container An aero derivative gas turbine -Siemens Steam Turbine Generator SST-300 C2S/C160; Manufactured in 2016 Output 15.75MW ISO Speed 7059 RPM Admission Steam Temperature 400 Degrees C Admission Steam Pressure 30 bara Exhaust Pressure 0.07 bara Rotation- Right

82MW ISO rated combined cycle power plant. The plant’s main equipment is composed of a Rolls Royce Trent 60 DLE Gas Turbine (also known as the SGT-A65), a Nooter/Eriksen HRSG, and a Siemens SST-300 Steam Turbine. These are below; 1. Rolls Royce USA, manufactured Trent 60 (SGT-A65) Gas Turbine Generator Set; · Manufactured in 2016, delivered in August 2017. Never used. · 65.9 MW(e) ISO · 43.8% Gross efficiency / 8,228 kJ/kWh Heat Rate · DLE Dry Low Emissions with ≤ 25 ppmvd at 15% O2 on fuel gas · Cold start to full power in under 10minutes · 50Hz, but easily convertible to 60Hz · Engine still preserved in original shipping container · An aero derivative gas turbine 2. HRSG is licensed by Nooter Eriksen USA; 3. Siemens Steam Turbine Generator SST-300 C2S/C160; · Manufactured in 2016 · Output 15.75MW ISO · Speed 7059 RPM · Admi ...

Control Fanuc ... i Series Turning diameter ... 600mm Turning length ... 330mm Inclined bed Spindle bore ... 61mm Turret Circumferential diameter over bed ... 600mm Circumferential diameter via support ... 400mm Axis X ... 205mm Axis Z ... 340mm Rapid traverse of the X axis ... 30m/min Rapid traverse of the Z axis ... 36m/min Spin speed... 0-6000 rpm. Max. spindle torque ... 127Nm Main engine power ... 11/15kW Doosan Robot Cell Assembly: 2x LYNX 2100A + ROBOTEC APC7 (Fanuc AM-100 iC6L) - The machines are supplied with chucks and pliers - High pressure cooling 20bar - Arm for picking up workpieces (Ø65 x L130 mm, weight 3 kg) - Automatic door opening - Spindle bladders for cleaning the clamping jaws - Oil separator - OIL SKIMMER - Tool Load Monitor (works with X-, Z-axis and S-spindle) - Workpiece conveyor The machine is in good condition, possible to test un ...

TECHNICAL SPECIFICATIONS Manufacturer: ROHR Designation: Floating grab system Design: Catamaran construction, floating Type: RS 8.2 - 230 PK Year of Make: 1981 Gripper capacity: 8 cbm Grab weight: approx. 10.5 t Excavator depth: 60 m Hoist winch motors: 2 x 175 kW Lifting gear: 2 pcs. Fabr. DEMAG, type HDH 236 Number of mooring winches: 4 pcs. Pontoon dimensions: - Length: 22,000 mm - Width: 24,000 mm - Height: 2,000 mm - Draught: 1,400 mm SPECIFIC COMMENT - Fully functional mining equipment - If required, an associated folding barge (100 cbm) can be offered - Incl. 1 spare engine Mannesmann-Demag 175 kW Available from December 2024 / early 2025

Laser-Italy, complete automatic biscuit and biscuit roll line 250-300 kg/h for: Small layer cakes, capacity: 19700 pieces/h, dimensions: 32x70xh23 mm Large layer cakes, capacity: 8900 pieces/h, dimensions: 48x100xh23 mm Mini rolls, capacity: 10300 pieces/h, dimensions: ø35x80 mm Sponge rolls, capacity 1190 pieces/h, dimensions: ø60x250 mm with 1 flow-wrapping machine 250-350 ppm (Syntegon-Germany) Includes: - Pre-mixing container for dough or baking mass PML200 - Turbo mixer aeration unit TML500 - Water cooling unit complete with connecting pipes, biscuit roll extruder, EXTR1000 - Sponge cake decorating unit before baking DECO1000 - Cyclothermal tunnel kiln FCT 1.0 x 10 m - Cooling belt for sponge cake TRPS1000 - Sponge cake work bench BLPS1000 - Longitudinal cutting device for sponge cake GRTL1000 without tools - Cutting Tools for Sponge Cake Cutter GRTL1000 - Syru ...

Various new spare parts for Rösler blasting system Turbine Hurricane H42 H32 H28 Litter scoop Rösler H42 H32 H28 Impeller Rösler H42 H32 H28 Guide sleeve Rösler H42 H32 H28

ID3420 Geotec Rotomax XL GTCi year/Baujahr 2012 approx. 10,000 hours/hours 15 t Crawler drilling rig, Flush drilling rig, double-head rig, drilling with protective casing, geothermal energy up to 250 m depth - diameter up to 180 mm, well drilling up to 100 m depth - up to 400 mm diameter, power 168 KW, with 150 m drill pipe (90 mm) and 30 m protective piping (178 mm) Crawler drilling rig, flush drilling rig, double-head rig, drilling with protective casing, geothermal energy up to 250 m depth - diameter up to 180 mm, well drilling up to 100 m depth - up to 400 mm diameter, power 168 KW, with 150 m drill pipe (90 mm) and 30 m protective casing (178 mm)

Washing machine Pero3/u (2 tank) with odolejaczem

WDE MASPELL TVS ROLL 1.8 E 8 L vacuum kiln was built in 2015 by the Italian company WDE MASPELL S.r.l.. The machine is used for the heat treatment of solid wood, in the form of planks or pre-cut pieces with a maximum length of 8 metres. The innovative vacuum technology, compared to traditional methods of impregnating wood, reduces treatment times by up to 50%, while also reducing emissions of harmful substances into the environment. High temperature combined with vacuum improves the intrinsic properties of the wood by changing its chemical structure. As a result, the wood elements take on a very dark colour and, most importantly, become harder and more resistant to external influences, i.e. moisture or fungi. The TVS ROLL 1.8 E 8 L vacuum wood dryer is also suitable for fumigation, i.e. the process of insect removal. All thermal processes are optimised for maximum heat utilisation. Th ...

PRINTER CUTTER S. No.: ZY30124 Equipment / Additional information: Technology: UV-Print&Cut InkJet LED Printing technology: Piezoelectric inkjet printer Media: Width 182 to 762 mm Thickness Maximum 1.0 mm with cover paper, when printing Maximum 0.4 mm with cover paper and 0.22 mm without cover paper, when cutting Outer roll diameter Maximum 180 mm Roll weight: Maximum 20 kg Inner diameter: 50.8 mm or 76.2 mm Print/cut width: Maximum 736 mm Ink cartridges Type: Roland ECO-UV / ECO-UV S Capacity: 220 cm³, 500 cm³ Colors: ECO-UV: Six colors (cyan, magenta, yellow, black, white and gloss varnish) / ECO-UV S: Five colors (cyan, magenta, yellow, black and white) Ink drying unit Dual UV LED lamp Print resolution (dots per inch / dpi): Maximum 1440 dpi Cutting speed: 10-600 mm/s (10-300 mm/s in media feed direction) Cutting force: 30-300 gf Blade  ...

100 x ball form 3 mm, 100 x ball shape 5 mm (shank 3), 100 x cylinder shape 2 mm (shank 3), 100 x rolls round form 3 mm, 100 x rolls round shape new and in 100 he packed 6 mm (shank 3), boxes, rolls round cutter 3 mm packed individually. List price (list price) CA EUR 5.00 piece.

Manufacturer: Holzher Vorschub 3 Rollen, Type: ET 117, Feeding by rollers: 3 Rollen, Technical data:: 0,75 , Speeds: 4, Deflection of the pendulum axes mm: ca.25 mm,

Manufacturer: KEB Homag Gruppe, Type: 07.FO.RO1-4AO8, Model: 95120275/135514, Hz: 50/60 HZ, Power Output: 1,8 KVA,

Manufacturer: KEB Homag Gruppe, Type: 07.FO.RO1-4AO8, Serial number: 95120264/135514, Hz: 50/60Hz, Power Output: 1,8 KVA,

Complete range of well-preserved stamps and dies in the same number and diameter as in the brochure shown.

Stone slabs / cooker trolley for oven HEUFT VTR or Daub Thermo roll possible 2 x or 3 x deep oven width 80 cm or 100cm and how much floor you need. All for special bestelung

New venture for special order Requirements as you need all standart with daub/HEUFT 60 x 80 cm or 60x80cm sheets Stainless steel New

Buggies - HEUFT - Daub Thermo roll VTR for baking on stove. possible 2 x or 3 x deep oven width 80 cm or 100cm and how much floor you need. All for special bestelung

Manufacturer: Lieder (ROBOT FOOD TECHNOLOGIES) Type: TA54V-2 4 Lines Size of tubes: Ø 75 mm Filling volume: Filler 1: 25 - 50 ml Filler 2: 100 - 250 ml (you can make two different products into one cup) Capacity: up to 10.000 cups/h Cup disinfection: by H2O2 Including: - carton erector and packer 4x5 - Clean air filter (Laminar flow) - CIP installation - SIEMENS S5 control

Spare parts from a Fraesmaschine Webo Roeperwerk type Gradumat Table size approx. 12501000mm, complete control Fanuc Y.O.M. 1987 such as board control panel, glass mass staebe, servoverstaerker, motors, ball roller spindles, feed motors, uvw. Price on request No more vertical head. Special price

Baking cart - HEUFT - Daub Thermo roll VTR for baking on stove. possible 2 x or 3 x deep oven width 80 cm or 100cm and how much floor you need. All for special bestelung

Manufacturer: Homag, Type: Rollendruckzone, FREETEXT1: Länge ca.1000 mm, FREETEXT2: 16 Stück Druckrollen gefedert, FREETEXT3: Verstellbar, FREETEXT4: Rollen Gummierung defekt,

Manufacturer: Roma Rolltor Kunststofflammele, Year: ca2000, FREETEXT1: mit Antrieb , FREETEXT2: Kunststoflamelle, FREETEXT3: 2 Führungschienen 3380 mm, FREETEXT4: Rolltorhöhe 3380 mm, FREETEXT5: Rolltorbreite 3340 mm, Year :ca2000

Tube bundle heat exchangers Manufacturer: Orsymonde France Type: Tube bundle Year of construction: 2000 Serial number: 1.00.098 Carrier: Medium: Water Material: 1.4404 (V4A) Operating pressure: 3 bar Temperature: ambient temperature Test pressure: 6 bar Coat: Medium: Gas Material: 1.4404 (V4A) Operating pressure: 0.5 bar Temperature: ambient temperature Test pressure: 1 bar Dimensions: Length: 2.070 mm Width: 1.070 mm In very good condition!

EXTRUDER

Qty 1 x Farrel Bridge 4 roll inverted L Lab calender, Roll width: 381 mm roll Ø: 152 mm Roller bearings Speed: 2,38 – 23,8   1/min., adjustable Nip adjustment: by hand Friction: 1:1 / 1:1,21 Drive: 9,25 kW, 380 V Measurement: ca. 1.765 x 1.687 x 1.800 mm (L x W x H) Weight: ca. 1.800 kg in. control cabinet

2 squid drilling spindles ROTAX, for conversions etc.

Qty. 1 Second-hand overhauled 4-Hi cold rolling mill Mfc.: SUECO (Member of IHI Group) Material of rolling Series 5000 & 6000 The rolling mill has been bought in 2023 and total overhauled. All revamped and painted of mill housing, coiler, gear box, roll chock, and backup rolls etc. Installed new electrical controls, hydraulic system, work rolls and other essential components. Please note that the new owner invested USD 2.1 Million in 2023. Strip width: 400 – 600 mm (650 mm) Thickness: 0.05 – 2.0 mm Rolling speed: 300 m/min. Gear type: 3.5:1 ID 508 mm OD 1500 mm Coil weight: 5000 kg Work roll dia.: 200 mm (200 – 180 mm) Length: 740 mm Back-up roll dia.: 650 mm (650 – 630 mm) Length: 720 mm Work roll drive Main mill drive power: 300 kW, 0-600/1800 RPM R/Tension reel power: 110 kW, 0-600/1800 RPM L/Tension reel power: 90 kW, 0-600/1800 RPM

Year of manufacture 2004 6 piece HEUFT VTR oven each oven with separate exhaust hood including display with digital control 2 rack are pro oven each oven is for 2 rack with 10 supports 60 x 80 cm Optionally you can buy to raetzliche rack to We have about 60 new rack with boiler with mounting with transport