Verified dealer
View details
Kärcher ROBO30 Inclined drilling machine for profiles
used
1 / 7
Technical data
· ID 163582072Used machinery
- Condition
- used
- Year of manufacture
- 2023
- Operating hours
- 10 h
- Location
- 73119 Zell u.A.
Identifikation
ManufacturerKärcher
ModelROBO30
Technik
Quantity1
Description
KÄRCHER ROBO 30 pipe boring machine for pipes, flat material and profiles
With this machine, tubes, flat material or profiles can be cut very quickly and accurately in a single pass.
can be drilled or milled at an angle or at an angle up to 50° in such a way that filling rods or filling tubes up to 1" can be drilled or milled
can be plugged through.
With the standard additional clamp for the jaw chuck, you can not only cut pipes, but also
transport flat material or other profiles with the feed and at the desired angle up to over
Make 50° single-sided holes or through holes.
The clamping jaws in the self-centering vice have a recess at the top for flat material.
We are unrivalled when it comes to converting to another material!
The feed is positioned at 0.1 mm with the counter with absolute or chain gauge.
With the ROBO 30, you don't need to set limit switches or cams for pipe feed.
Elaborate alignment with all possible tools and rework is now part of the
past.
Pipes can be drilled/milled from the 2nd side for through holes. To do this, the pipe is connected to the
jaw chuck twisted by 180° and the unit was quickly moved to the other side at the stop or onto the
swivelled to the desired angle. And in less than 10 seconds!
The machine has a pneumatic drill feed in the Z-axis with hydraulic brake cylinder
which grants a defined lead time. The changeover point is easy by means of a limit switch
manually adjustable and the feed and working speed is infinitely adjustable via a valve.
Your benefits:
Huge time saver and very easy to use. This means that the demands on the operator are low
Because almost no welding seams are required, there is no need for expensive plastering.
Natural-based minimal cooling lubrication developed for stainless steel, also for your saw.
Inexpensive HSS PM milling cutters can be used.
Self-centering clamping jaws for and flat material
Flow forms and thread forms ( with C8 / B8 ) in 1 clamping
You are welcome to test this machine with us and find out that you can drill some angled holes.
in less than half the time and with much better quality.
Specifications:
KÄRCHER railing boring machine ROBO 30
Chuck for pipes adjustable radial with scale infinitely variable fast/fine
Max. tilt angle left / right 53 degrees
Max milling diameter in INOX flat material ° 20 mm
Max. milling diameter in INOX - tube 43 mm
Flow forms in INOX pipe S = 2 mm M 5 – 6 – 8
Speed infinitely variable via frequency converter
Feed length of tube/profile via timing belt approx. 3000 mm
Motor power 2.2 kW
Electrical connection 230 V
Air connection 6 bar
Max. tube diameter approx. 78 mm
Max. dimensions flat steel St. and INOX 80 x 12 mm
Collet ER 32 max. clamping diameter 20 mm
Overall dimensions: L x W x H approx. cm 402 x 100 x 183
Weight approx. kg 540
With this machine, tubes, flat material or profiles can be cut very quickly and accurately in a single pass.
can be drilled or milled at an angle or at an angle up to 50° in such a way that filling rods or filling tubes up to 1" can be drilled or milled
can be plugged through.
With the standard additional clamp for the jaw chuck, you can not only cut pipes, but also
transport flat material or other profiles with the feed and at the desired angle up to over
Make 50° single-sided holes or through holes.
The clamping jaws in the self-centering vice have a recess at the top for flat material.
We are unrivalled when it comes to converting to another material!
The feed is positioned at 0.1 mm with the counter with absolute or chain gauge.
With the ROBO 30, you don't need to set limit switches or cams for pipe feed.
Elaborate alignment with all possible tools and rework is now part of the
past.
Pipes can be drilled/milled from the 2nd side for through holes. To do this, the pipe is connected to the
jaw chuck twisted by 180° and the unit was quickly moved to the other side at the stop or onto the
swivelled to the desired angle. And in less than 10 seconds!
The machine has a pneumatic drill feed in the Z-axis with hydraulic brake cylinder
which grants a defined lead time. The changeover point is easy by means of a limit switch
manually adjustable and the feed and working speed is infinitely adjustable via a valve.
Your benefits:
Huge time saver and very easy to use. This means that the demands on the operator are low
Because almost no welding seams are required, there is no need for expensive plastering.
Natural-based minimal cooling lubrication developed for stainless steel, also for your saw.
Inexpensive HSS PM milling cutters can be used.
Self-centering clamping jaws for and flat material
Flow forms and thread forms ( with C8 / B8 ) in 1 clamping
You are welcome to test this machine with us and find out that you can drill some angled holes.
in less than half the time and with much better quality.
Specifications:
KÄRCHER railing boring machine ROBO 30
Chuck for pipes adjustable radial with scale infinitely variable fast/fine
Max. tilt angle left / right 53 degrees
Max milling diameter in INOX flat material ° 20 mm
Max. milling diameter in INOX - tube 43 mm
Flow forms in INOX pipe S = 2 mm M 5 – 6 – 8
Speed infinitely variable via frequency converter
Feed length of tube/profile via timing belt approx. 3000 mm
Motor power 2.2 kW
Electrical connection 230 V
Air connection 6 bar
Max. tube diameter approx. 78 mm
Max. dimensions flat steel St. and INOX 80 x 12 mm
Collet ER 32 max. clamping diameter 20 mm
Overall dimensions: L x W x H approx. cm 402 x 100 x 183
Weight approx. kg 540
Inquire about this machine
Your inquiry goes directly to the seller of this machine.
