british flag
Resale Logo

rms used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information used and reconditioned Diesel and Gas Generators  ALL POWER SOLUTION  http://www.allpowersolution.com 
banner logo
start page > keywords rms > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125465350 901

ZUGMASCHINE T1) Steyr Daimler Puch 760 a for sale


last off Code: BH-80088 First registration: 18.12.1979 elapsed. Hours of operation: 4.208 h Output: 44 kW Displacement: 1,140 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to Â&se ...

 
last off Code: BH-80088
First registration: 18.12.1979
elapsed. Hours of operation: 4.208 h
Output: 44 kW
Displacement: 1,140 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
FIN: 295.05-3685
Equity / total weight: 2,517/4,500 kg
Color: grey
Facilities: with headlamps above installed, safety signal lamp
Tyres: Max. Axle load front 1,750 kg, allowed axle load rear 2.300 kg, documentation: licence of types of available key: 1
Comments to the State: motor does not start, gearbox is leaking, axes are leaking, corrosion game on the steering linkage and steering column, have strong bearing clearance at rear axle, brake lines and hoses partly rusted and cracked, Total failure cable fire, batteries, frame has some significant corrosion damage, hydraulic system results in oil loss, paint largely bleached out, div. Rust all around vehicle, abrasions, and dents all around vehicle, rust spots on wheels,
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2420-0-350-0014 and 2420-0-550-0005
 
Price  
    request
125489768 702

DIOSNA Wendelkneter, Fabr. Diosna for sale
wendelmixer, fabr. Diosna, type W 240 AF/T,


max. 240 kg dough, safety device\r\n foil panel/key pad (Folientastatur), 2 speeds, \r\nhydraulik fixing the bowl\r\ntools/wendlarms stainless steel\r\naccessories: scraper with temperature sensor\r\n  ...

 
max. 240 kg dough, safety device\r\n foil panel/key pad (Folientastatur), 2 speeds, \r\nhydraulik fixing the bowl\r\ntools/wendlarms stainless steel\r\naccessories: scraper with temperature sensor\r\n 2 stanless steel bowls\r\n
 
Price  
    request
125465341 2404

MOBIL-KRANWAGEN ÖAF Gräf & Stift for sale


last off Code: BH-82028 First registration: 17.07.1981 FIN: 6970353 elapsed. Mileage: 397.141 km power: 285 kW Displacement: 12.763 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to &A ...

 
last off Code: BH-82028
First registration: 17.07.1981

FIN: 6970353
elapsed. Mileage: 397.141 km power: 285 kW
Displacement: 12.763 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
Type, variant, version: 20-320 G6-LTMF1
Equity / total weight: 23.050/23,400 kg
Color: grey
Equipment: Cloth - and leather interior with rear-mounted on Liebherr crane cab model LTMF1030V, serial number. 0011621, YEAR 1981
Documentation: types of licence available
Key: 1
Comments on the condition: engine oil and fuel loss, v-belts, hydraulic blower leaking, MA oil loss, Wishbone broken MA, VA pushrod defective, Luftpresser poor performance, articulated wheel rim on several points touched on, lights broken heater is to examine, hydraulic pump leak, leakage of crane hydraulics, various paint damage all-round vehicle as well as dents and rust, holes with rust spots behind passenger door front right,.
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2320-0-400-0041 and 3950-0-400-0199
 
Price  
    request
125475389 107

OBRU H 4005 for sale
Decoilers for Coils


sheet width - max.: 0500 - 670 mmcoil weight: 4,00 tcoil internal dia.: 430 - 550 mmcoil outside - diam. ca.: 460 mmback length withour arms: 670 mmback length with 1 arm: 570 mmspeed ca.: 5 m/min.total power requirement ...

 
sheet width - max.: 0500 - 670 mm
coil weight: 4,00 t
coil internal dia.: 430 - 550 mm
coil outside - diam. ca.: 460 mm
back length withour arms: 670 mm
back length with 1 arm: 570 mm
speed ca.: 5 m/min.
total power requirement: kW
weight of the machine ca.: 1,50 t
dimensions of the machine ca.: 1,80 x 1,40 x 1,75 m
- 24 Volt magnetic coupling
- pneumatic pressure arm
- height above hallway 1 m
- Reel is provisionally connected for demonstration purposes
- Working direction from left to right
- 5 collar arms



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
125465335 2422

LKW ÖAF Gräf & Stift 20320G2 for sale


last off Code: BH-79040 Year of construction: 1976, vehicle was never approved, authorities must be assumed by the buyer elapsed. Mileage: 132.490 km : KW 235 Displacement: 12.763 cc Test badge: no inspection sticke ...

 
last off Code: BH-79040
Year of construction: 1976, vehicle was never approved, authorities must be assumed by the buyer
elapsed. Mileage: 132.490 km
: KW 235
Displacement: 12.763 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
FIN: 6970040
Equity / total weight: 12,900/22,000 kg
Number of seats: 2 in driver's cab
Equipment: material facilities, with rear mounted plane
Documentation: types of licence available
Key: 1
Comments on the condition: engine oil loss, loss of fuel, exhaust system strongly div. rubber bearings for axles and Wishbone rusted, porous, Doppelrollgelenke VA game Achsschenkel have right and left vertical game, compressed air brake system heavily leaking, div. Compressed air hoses porous, brake master cylinder leaking, different steering knuckle heads have Heckzellonen have game, faulty, battery jump, frame, springs and shock absorbers are rusted, missing parts of front, div. parts probably spare parts dispensers, vehicle not ready to go, rust all-round vehicle div. paint damage, paint differences, is pointed out expressly that no complete inventory and check the functionality of the auction object was performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2320-0-410-0037
 
Price  
    request
125475391 107

OBRU SAH/5M for sale
Decoilers for Coils


sheet width - max.: 0550 - 710 mmcoil weight: 1,50 tcoil internal dia.: 350 - 450 mmcoil outside - diam. ca.: 1700 mmback length without arms: 710 mmexpansion: manuell total power requirement: 1,50 kWweight of the machin ...

 
sheet width - max.: 0550 - 710 mm
coil weight: 1,50 t
coil internal dia.: 350 - 450 mm
coil outside - diam. ca.: 1700 mm
back length without arms: 710 mm
expansion: manuell
total power requirement: 1,50 kW
weight of the machine ca.: 0,70 t
dimensions of the machine ca.: 1,60 x 0,80 x 1,20 m
- sheet width without arms 710 mm
- sheet width with 1 arm max. 625 mm
- Brake motor with LENZE variable speed gearbox
- Speed control infinitely variable via handwheel 7 - 37 rpm.
- Height of mandrel over corridor 920
- Drive motor is equipped with a connection cable
(Control is missing)
- with 6 pieces waistband arms
- Right-hand rotation



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
125465332 2444

ACHS-ANHÄNGER O3) Achleitner 2AANH5 for sale


last off Code: BH-92240 Year of construction: 1989, vehicle was never approved, authorities must be assumed by the buyer Matriculation year: 14.12.1989 Test badge: no inspection sticker must be acquired by the buyer p ...

 
last off Code: BH-92240
Year of construction: 1989, vehicle was never approved, authorities must be assumed by the buyer
Matriculation year: 14.12.1989
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
FIN.: 7240
Weight/payload/total weight: 2,800/5,200/7,800 kg
Color: grey
Construction: Flatbed
Facilities: With tarp
Documentation: types of licence available
Comments to the State: rusted axles, brake system Pneumatic hoses are cracked, heavily rusted tow bar and rotating ring recording, number plate lights yellowed, rusted frame and springs, various rust and paint damage all around vehicle, div. Abrasions all around and in the vehicle, expressly pointed out is that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2330-0-200-0040
 
Price  
    request
125460669 106

Lot of Press Tools


Weight approx.: 200 kgDimensions (l x w x h) approx.: 1000 x 600 x 1000 mmDescription: Suitable for spindle presses, various sizes, forms and weights, see photos for details

 
Weight approx.: 200 kg
Dimensions (l x w x h) approx.: 1000 x 600 x 1000 mm
Description: Suitable for spindle presses, various sizes, forms and weights, see photos for details
 
used machinery auction RESALE 45 €  
  GB   request
125465330 2486

PKW M1) VW Golf for sale


last off Code: BH-67005 Matriculation year: 11.04.2006 elapsed. Mileage: not readable Power: 74 kW Displacement: 1.896 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a ...

 
last off Code: BH-67005
Matriculation year: 11.04.2006
elapsed. Mileage: not readable
Power: 74 kW
Displacement: 1.896 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
Type, variant, version: 1J/ACAXRX0/FM5FM52J067N1N1
FIN: WVWZZZ1JZ6W018023
Equity / total weight: 1,353/1.900 kg
Color: white
Body: hatchback
Equipment: 5-speed manual transmission, CD player, fabric outfit, Electr. Power Windows front and rear, roof rails with special transport lamps design
Tyres: tyres 2 x
Documentation: types of licence available
Key: 1
Comments to the State: rusted exhaust main silencer hull rusted through, easily leaking charge pressure control valve, coupling on the wear limit, div. axle and suspension parts wheel bearing rusted, broken front, grease with Tracking joint sleeve, starter motor running after frame has oxidation, rusted Springs, camber plates left front damaged, battery deep probably emptied or defective, purchased to cover on seats already by worn, rusty spots on hood and front Wheel arches, abrasions at front apron, small dents at wheel arches front right with rust spots, abrasions in the rear apron and loading area for tailgate, sticker residue, abrasions at front bumper front left,.
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2310-0-200-0310 and 2310-0-550-0194
 
Price  
    request
125460437 1403

DoubleSided Cantilever Rack


Weight approx.: 120 kgDimensions (l x w x h) approx.: 2000 x 1420 x 1500 mmDescription: 4 arms each for lighter materials, length 2000 mm, for further details see photos

 
Weight approx.: 120 kg
Dimensions (l x w x h) approx.: 2000 x 1420 x 1500 mm
Description: 4 arms each for lighter materials, length 2000 mm, for further details see photos
 
used machinery auction RESALE 65 €  
  DE   request
125465328 2479

PKW M1) Ford Bus Vario FT330 85 for sale


last off Code: BH-66701 Matriculation year: 24.01.2007 elapsed. Mileage: 135.903 km Power: 85 kW Displacement: 2.402 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a,  ...

 
last off Code: BH-66701
Matriculation year: 24.01.2007
elapsed. Mileage: 135.903 km
Power: 85 kW
Displacement: 2.402 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
Type, variant, version: FDC6TRANSIT/TURNEO/JXFA2B/D9CCA
FIN: WF0SXXTTFS6G34663
Equity / total weight: 2,044/3,330 kg
Color: Blue
Body: Sedan
Number of seats: 9
Equipment: 6-speed manual transmission, radio, Electr. Window regulator front
Documentation: types of licence available
Key: 1
Comments to the State: oil leak at crank shaft sealing ring, injector leaking, div. Anrostungen on all axle parts, brake discs and pads are 1 cylinder renewed, is steering leak, various rusty Anrostungen on main and auxiliary frame, springs and shock absorbers,. Passenger seat cover, expanded storage space, manufacturer emblems bleached out, gall at hood, rust spots on steel rims,.
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
Asset number: 2310-41-000-3765 und2310-0-550-0283
 
Price  
    request
125443127 109

ALKOR SP. Z O.O., POLAND ALPRHW 12000 for sale
Alkor Alprhaw 12000 - Hydraulic press


Hydraulic press is a technical device multiplying the pressure by using the phenomenon of pressure stability in a closed hydraulic system. The press in question is a 4-column, pressing press used for crushing the batch i ...
used machine
 
Hydraulic press is a technical device multiplying the pressure by using the phenomenon of pressure stability in a closed hydraulic system. The press in question is a 4-column, pressing press used for crushing the batch in special forms. No forms at the device.
2014
25,500 EU?  
  PL   request
125465323 2422

LKW N3) ÖAF Gräf & Stift 19-281 F for sale


last off Code: BH-83589 Matriculation year: 19.10.1988 elapsed. Mileage: 105.118 km : KW 206 Displacement: 11,413 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, aut ...

 
last off Code: BH-83589
Matriculation year: 19.10.1988
elapsed. Mileage: 105.118 km
: KW 206
Displacement: 11,413 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
FIN: VAO505A278F004826
Equity / total weight: 9.930/18,000 kg
Color: grey
Construction: Open box
Number of seats: 3
Equipment: Gearbox, fitted tarp, rear
Documentation: types of licence available
Key: 1
Comments on the condition: engine oil and fuel loss, cold start Device defective, strong noise, probably massive gearbox bearing failure, stabilizer of defective rear wheel hub left front leak, air pressure er performance poorly, rusted frame , Spring cushion and Sling have game, div. differences in colour varnish, sticker residue, prov. Repainting, abrasions all around vehicle, abrasions at front bumper, div. Rust all around vehicle,
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2320-0-400-0046
 
Price  
    request
125443131 903

HOLMER Terra Dos T3 Plus for sale
Holmer Terra Dos T3 Plus - Beet harvester


The self-propelled harvester for harvesting beets, Holmer T3 Plus, is used for harvesting root crops. The machine simultaneously performs the work of several previously used machines or machines and a work brigade. The b ...
used machine
 
The self-propelled harvester for harvesting beets, Holmer T3 Plus, is used for harvesting root crops. The machine simultaneously performs the work of several previously used machines or machines and a work brigade. The beet harvesting machine simultaneously drives beetroots from the leaves, cleanses the roots, digs them, separates them from the ground and collects them.
2009
65,750 EU?  
  PL   request
125465317 2486

PKW M1) VW Golf for sale


last off Code: BH-67262 Matriculation year: 15.12.2008 elapsed. Mileage: 264.010 km Power: 77 kW Displacement: 1.896 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a,  ...

 
last off Code: BH-67262
Matriculation year: 15.12.2008
elapsed. Mileage: 264.010 km
Power: 77 kW
Displacement: 1.896 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
Type, variant, version: 1KM / ACBLSX0/FM5FM5A4009N7GGN1
FIN: WVWZZZ1KZ9M289084
Equity / total weight: 1.361/1,990 kg
Color: Blue
Body: hatchback
Equipment: material facilities, 5-speed manual transmission, Electr. Power Windows front and rear, trip computer, air conditioning, roof rails colour: black
Tyres: tyres 2 x
Documentation: types of licence available
Key: 1
Comments to the State: scratches and rust spots at hood, paint damage on front bumper right front, abrasions wheel box left rear;
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
Asset number: 2310-12-384-6284 and 2310-41-000-8564
 
Price  
    request
125443040 806

AGFA, VARIOUS MANUFACTURERS Various types for sale
Agfa CTP offset machine with platesetter


Agfa CTP system is a set of printing devices for making printing forms. The devices allow the use of CTP technology, which consists in direct exposure of offset plates or flexographic plates. This method of printing form ...
used machine
 
Agfa CTP system is a set of printing devices for making printing forms. The devices allow the use of CTP technology, which consists in direct exposure of offset plates or flexographic plates. This method of printing forms ensures high quality and reduces the preparation time of the printing process.
2010
26,500 EU?  
  PL   request
125465310 901

ZUGMASCHINE T1) Steyr Daimler Puch 760 a for sale


last off Code: BH-80088 First registration: 18.12.1979 elapsed. Hours of operation: 4.208 h Output: 44 kW Displacement: 1,140 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to Â&se ...

 
last off Code: BH-80088
First registration: 18.12.1979
elapsed. Hours of operation: 4.208 h
Output: 44 kW
Displacement: 1,140 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
FIN: 295.05-3685
Equity / total weight: 2,517/4,500 kg
Color: grey
Facilities: with headlamps above installed, safety signal lamp
Tyres: Max. Axle load front 1,750 kg, allowed axle load rear 2.300 kg, documentation: licence of types of available key: 1
Comments to the State: motor does not start, gearbox is leaking, axes are leaking, corrosion game on the steering linkage and steering column, have strong bearing clearance at rear axle, brake lines and hoses partly rusted and cracked, Total failure cable fire, batteries, frame has some significant corrosion damage, hydraulic system results in oil loss, paint largely bleached out, div. Rust all around vehicle, abrasions, and dents all around vehicle, rust spots on wheels,
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2420-0-350-0014 and 2420-0-550-0005
 
Price  
    request
125401608 1403

Cantilever Rack


Weight approx.: 250 kgDimensions (l x w x h) approx.: 1600 x 1100 x 3000 mmDescription: Rack composed of 2 upright height 3000 mm, width 1300 mm with 8 arms length 900 mm. SHIPPING DIMENSIONS 3000 x 1000 x 1200 mm

 
Weight approx.: 250 kg
Dimensions (l x w x h) approx.: 1600 x 1100 x 3000 mm
Description: Rack composed of 2 upright height 3000 mm, width 1300 mm with 8 arms length 900 mm.
SHIPPING DIMENSIONS 3000 x 1000 x 1200 mm
 
used machinery auction RESALE 200 €  
  IT   request
125465306 2419

SPEZIALKRAFTWAGEN N1) VW Hochraum-Kasten Allrad for sale


last off Code: BH-70539 Matriculation year: 26.09.1989 elapsed. Mileage: 82.060 km Output: 51 kW Displacement: 1,588 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a,  ...

 
last off Code: BH-70539
Matriculation year: 26.09.1989
elapsed. Mileage: 82.060 km
Output: 51 kW
Displacement: 1,588 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
Type, variant, version: 251/4WD bra
FIN: WV2ZZZ25ZLG114504
Equity / total weight: 2,060/2,600 kg
Color: Green
Construction: closed
Number of seats: 3
Equipment: material equipment, cassette player, 4-speed manual transmission, all-wheel drive
Documentation: types of licence available
Key: 1
Comments on the condition: engine oil loss, exhaust manifold and gasket defective, gearbox leaking, clutch on the wear limit, intermediate gear leaking axle parts div. porous suspension rubbers, rear wheel bearing play, brake rusted, front discs and pads damaged, partially rusted brake line, steering gear easily leak, starter broken, heating and fresh air controller Anrostungen in frame, fenders and shock absorbers, rust spots at windscreen dawned, front left, differences in colour varnish, div. prov. Repainting, sticker residue, is pointed out explicitly that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2320-0-300-0132 and 2320-0-550-0083
 
Price  
    request
125401623 1403

Cantilever Rack


Weight approx.: 250 kgDimensions (l x w x h) approx.: 1800 x 1300 x 3000 mmDescription: Rack composed of 2 upright height 3000 mm, width 1300 mm with 8 arms length 1000 mm. SHIPPING DIMENSIONS 3000 x 1100 x 1400 mm

 
Weight approx.: 250 kg
Dimensions (l x w x h) approx.: 1800 x 1300 x 3000 mm
Description: Rack composed of 2 upright height 3000 mm, width 1300 mm with 8 arms length 1000 mm.
SHIPPING DIMENSIONS 3000 x 1100 x 1400 mm
 
used machinery auction RESALE 200 €  
  IT   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More RMS models (2 or more machines):
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Transfer Presses ( 2 - 4 Columns) KRUPP PST-A 160


Transfer press KRUPP PST-and 160 built in 1980. Technical data of the press KRUPP PST-and 160: -nominal pressure: 160 tons -cutting force degree 1:400 KN -clamping force between uprights: 1200 KN -the number of stages including the cutting level: 11 -the distance between uprights: 200 mm -pitch slider: 210 mm -drawing depth: 70 mm -the amount of jumping, infinitely adjustable: 15-75/min. -production range jumping from repeatability of its settings: 25-75/min. -number of jumping motion Setup: 15-25/min. -wykorzystywalny resource work per stroke in terms of 25-75 strokes per min.: 20000 J -maximum load single degree: 500 KN -the maximum load of a single degree by using the inserts: 630 KN -the maximum tape width: ok. 340 mm -the maximum cut-out diameter: 120 mm -the minimum cut-out diameter: 30 mm -the distance between uprights: 2450 mm -the height of the built-in tools in the lower position of the slider and its regulations (the space between the table and the imakami of the upper toolbar): 470 mm -the height of the surface transport extrusions over a dining table: 270 mm -height adjustment tool blocks: 40 mm -table clamping surface (width x depth): 2000 x 700 mm -adjustable spacing between the slats podajacymi: 210 +-300 mm -stroke closing slats which indicate for each terminal: 75 mm The progressive press wielooperacyjna KRUPP PST-and 160/11/200/210 is connected and can be checked on the move.

Beer Brewery 250 hl/Brew, 400 000-700 000 hl/year Steinecker Complete brewery


Beer Brewery 250 hl / brew 400 000 – 700 000 hl / year The brewery was originally built by Anton Steinecker in year 1984. Operation was stopped in January 2018 and it is almost untouched with all production equipment and water treatment (Only some tanks, EBI of the RGB line and filtration line were relocated to another brewery) This brewery is designed to produce high quality lager beers and pack them either in returnable glass bottles or 30 and 50-liter stainless steel KEGs. Annual technical beer production capacity is around 700 000 hl (with diluting high gravity beer) to actual 428 000 hl with 2 shift x 5 days packaging operation. Beer is packed in 0.5-liter returnable glass bottles and 30-50 liter stainless steel KEGs This brewery has Künzel made malt transport system from year 1984 with steel malt silos (3x 360 m3 malt, 2x42 m3 maiz). Malt handling capacity is 20 tons/hour and it has also 5 t/h malt dosing line with a hammer mill. Malt department is controlled with Siemens S7 200 PLC which has InTouch system. Malt house is complete and no missing equipment. Malt mill is wet type 2-roll Künzel. The complete line equipment is made by Steinecker in year 1984 and having substantial upgrade in 1994 and 2002 and it still powered and in good condition. This brew line can brew 8.5 brews / day, brew size 250 hl / brew, grist throw 5500 kg / brew and worth gravity up to 17 ° Plato. This brewery produced tree different type of high quality lager beers only. Last brew was made in December 2017 so everything is in good working order. This equipment forms a complete brewery (brew line) from malt mill to wort cooler with water island, CIP unit, buffer tank and Steinecker made Botec control system with Siemens Simatic S7-400 PLC up to the wort boiling. Yeast department is complete with sterilizer tank, two propagators and four yeast storage tanks. System is controlled with Siemens S7 PLC InTouch system. Filtration department has two good condition Alfa-Laval DAW units, 2 x 400 hl buffer tanks for DAW water and 4 x 400 hl BBT’s left. For fermentation this brewery has total cross capacity of 55600 hl tank volume. All fermenting tanks are outdoor model vertical tanks. Direct ammonia cooled CCTs Inox 10 x 2400 hl, glycol cooled CCTs Inox 14 x 1100 hl and direct ammonia cooled, coated (Fe) CCTs 4 x 2400 hl glycol cooled Packaging of beer is made with Krones year 1998 delivered returnable glass bottle line, capacity 45 000 – 55000 bph. The line has complete crate handing system and both flash and tunnel pasteurizer. Complete line (excluded EBI, which will go another brewery) is well maintained, powered and in full operational condition. The brewery has also KHS Till KEG line with 3 filling lines having capacity of 180 KEG / hour in 30 liter in stainless steel KEGs

Cutting-To-Length Lines FIMI


band width 100 – 1.300 mm band thickness 0,30 – 3,00 mm tensile strength (until 2,2 mm thickness) max. 1.000 N/mm² yield strength (until 2,2 mm thickness) max. 820 N/mm² tensile strength (until 3,0 mm thickness) max. 800 N/mm² yield strength (until 3,0 mm thickness) max. 650 N/mm² elongation max. 20 % coil weight max. 30,0 t coil inside – Ø 508 / 610 mm coil outside – Ø 600 – 2.100 mm sheet length 250 – 3.000 mm package weight max. 5.000 kg package height incl. palette max. 560 mm inlet speed 15 m/min. working speed max. 90 m/min. pass line height app. 1.100 mm working direction left ? right the line consists of: stocking ramps for 2 coils min. coil outside diameter 900 mm entry coil car centering device decoiler motorized mandrel – Ø 508 / 610 mm press roll motorized outboard bearing Support coil opener telescopic press roll strip centering device crop shear – hydraulically scrap box transfer table leveler 6 HI 2 cassettes with leveling rolls cassette 1: no. – leveling rolls 19 leveling roll diameter 43 mm cassette 2: no. – leveling rolls 19 leveling roll diameter 52 mm no. – back up rolls 5 sets, upper and lower cassette quick change device felt cleaning device tachometer wheel pinch roll at shear entry rolls driven by DC motor rotary shear VECTRONIC pinch roll driven by AC motor strip belt conveyor at the VECTRONIC shear exit place for oiling machine (customer’s supply) sheets conveyors to scrap carriage and stackers deflecting conveyor with 3 positions scrap box movable by AC geared motor scrap carriage for scrap length of max. 1.100 mm connecting conveyor to stacker 1 connecting conveyor to stacker 2 automatic stacker units: stacker 1 non-stop operation for sheets up to 3.000 mm length stacking with wooden pallets stacker 2 non-stop operation for sheets up to 3.000 mm length stacking with wooden pallets lifting stacking platforms 2 pieces for sheets up to 3.000 mm length hydraulic hydraulic oil pressure 120 bar pneumatic normal compressed air pressure 6 bar electric three phase voltage 380 ± 10% V, 50± 2 Hz auxiliary voltage 220 ± 10% V, 50± 2 Hz solenoid valve voltage 24 V DC. total power consumption 480 KVA

Beer Brew Line Steinecker 250 hl / Brew Steinecker, 8.5 brews/day high quality lager, up to 17°P


Beer brew line Steinecker 250 hl / brew This beer brew line was built originally by Anton Steinecker in year 1984 but is has been upgraded several times. Currently it can brew 8.5 brews / day, brew size 250 hl / brew, grist throw 5500 kg / brew and worth gravity up to 17 ° Plato. This brewery produced tree different type of high quality lager beers only. Last brew was made in December 2017 so everything is in good working order. This equipment forms a complete brewery (brew line) from malt mill to wort cooler with water island, CIP unit, buffer tank and Steinecker made Botec control system with Siemens Simatic S7-400 PLC up to the wort boiling. Main data Built by Steinecker in 1984 and upgraded later Brew size 250 hl, capacity 8.5 brews / day High quality lager beers, worth gravity up to 17 ° Plato Control system BOTEC control system with Simatic S7-400 PLC and InTouch program

Vertical Fermenting Tanks CCT 1300 hl Holvrieka, Denmark Insulated, 1.0 bar


Vertical Fermenting Tanks CCT Holvrieka 1300 hl Gross Tanks are made by Holvrieka in year 1998. They are self standing insulated and glycol cooled with 4 cooling zones. We have four identical tanks, both equipped with CIP bowl and in good condition. Techncial data: • Volume brutto 1300 hl, netto 1100 hl • Made by Holvrieka, Denmark, 1998 • Pressure 1.0 bar • Insulated, insulation PUR foam 150 mm • Glycol cooling 3 cooling zones on the body and cooled cone • Diameter 3550 mm, Total height 18100 mm, Weight 8 200 kg • Equipped with valves, sensors, sample valve, pipes, panels and service platforms • Two lifting hooks on top of CCTs for installation/dismantling

Injection Molding Machine for PET Preforms Husky GL 300 PET P100/120 E100, 15.000 bph


Injection Molding Machine for PET Preforms, Husky GL 300 PET P100/120 E100 This is a complete preform production line from granule feeding to PET bottle preform conveyor. The equipment was made by Spanish Husky Injection Molding Systems S.A on year 19 ...

Injection Molding Machine for PET Preforms Husky G 600 PET 19.000 preforms/h


Injection Molding Machine for PET Preforms, Husky G 600 PET, year 2000 This is a complete preform production line from granule feeding to readymade PET bottle preform conveyor. The equipment was made by Husky Injection Molding Systems S. A. (Spain) on ...

Fish processing machines BAADER 440


This machine is designed for processing gutted and headed cod and saithe from abt, 50 to 110 cm in total length (= 0,60 to 10 kg). It performs all cuts required for the production of dried salt fish (klipfish) using tools which are automatically controlle ...

Skewering machine, shish kebap, shashlik maker Balboni SP 600


Balboni SP 600 is a device for the production of steaks. The device will use in the foodservice industry and industrial. Device ready forms of barbecue. Very efficient and simple to use and maintenance. Specification: Manufacturer: BALBONI Model ...

Injection Molding Machine for PET Preforms Husky GL 300 PET P100/120 E100, 15.000 bph


Injection Molding Machine for PET Preforms, Husky GL 300 PET P100/120 E100 This is a complete preform production line from granule feeding to PET bottle preform conveyor. The equipment was made by Spanish Husky Injection Molding Systems S.A on year 19 ...

Injection Molding Machine for PET Preforms Husky G 600 PET 19.000 preforms/h


Injection Molding Machine for PET Preforms, Husky G 600 PET, year 2000 This is a complete preform production line from granule feeding to readymade PET bottle preform conveyor. The equipment was made by Husky Injection Molding Systems S. A. (Spain) on ...

Stralfors UW52CD + RW102CD


Unwinder-Rewinder for digital printing of forms Stralfors Model UW52CD + RW102CD Year 2000 Un-winder 1 x Stralfors Lasermax UW52 unwinder Re-winder 1 x Stralfors Lasermax RW102 rewinder Details with buffer/tensioning tower Available direct

Bottle filling plants Bottle filling line 5 liters bottle


Complete line for produces 5 liters botles. Line includes: - 2 Socets linear blower for 5 liters bottle with preforms container. Capacity: 1000 bph - Sleeve labelling machine. Capacity: 1500 bph - Linear filling machine with capper. Capacity 1000 b ...

Folding machines GUK FA 36/4 SAF


-Guk folder Year 2005, Four buckles max size 36x65 cms. -Min. paper size 8,5x10 cms., Paper from 40 to 250 grms. -Anti noise hoods, speed up to 30.000 sheets/ hour -Conditions as NEW, Only one owner, very low used

PET Stretching blowing machines Work-tech Pet streching machine


2 Socets linear blower for 5 liters bottle with preforms container Capacity: 1000 bph --- We offer new and used machines. With any further questions, please do not hesitate to contact us.

Injection Molding Machine for PET Preforms Husky GL 300 PET P100/120 E100, 15.000 bph


Injection Molding Machine for PET Preforms, Husky GL 300 PET P100/120 E100 This is a complete preform production line from granule feeding to PET bottle preform conveyor. The equipment was made by Spanish Husky Injection Molding Systems S.A on year 19 ...

Injection Molding Machine for PET Preforms Husky G 600 PET 19.000 preforms/h


Injection Molding Machine for PET Preforms, Husky G 600 PET, year 2000 This is a complete preform production line from granule feeding to readymade PET bottle preform conveyor. The equipment was made by Husky Injection Molding Systems S. A. (Spain) on ...

Bandsaw machines BONGIOANNI 1300


Manufacturer _ BONGIOANNI Model_ 1300 Features_ * ARTIGLIO Carriage with 5 hydraulic clamping; ? * Hydraulic Advancing; ? * Chain Loading at 4 ways with hydraulic arms; ? * Unloading Rollers System; ? * Reverse Feeding Chain; ...

Stralfors UW52CD + RW102CD


Unwinder-Rewinder for digital printing of forms Stralfors Model UW52CD + RW102CD Year 2000-2005 ?? Details with tensioner Available direct

stainless steel oscillating powder granulator Frewitt MGI-628


Stock number: U2265-1 Used stainless steel oscillating granulator by Frewitt (Switzerland) model MGI-628. Machine has rotor with diameter 122 mm x working width 435 mm and 5 arms. Chamber has internal dimensions : L 492 mm x W 285. Top feeding, bottom d ...

Disamatic Molding Line Model 2110 MK2 Disamatic 2110 MK2


Type: Disa 2110 MK2Year of production: 1994Forming chamber: 500x400x (100-315)Efficiency: core forms 300pcs / hourcored shapes 275 pcs / hourDemand for molding sand: 30 T / hourConnection power: 22 kWAdditional line equipment:- molding sump container over ...

Molding sand processing plant Formsand-Aufbereitungsanlage


Auktionsname: Partnerauktion BVA Auctions & Dechow | Insolvenzauktion | MWS Garching GmbH - Teil II (53260) Online-Versteigerung Beginn der Auktion: 05 März 2018 09:45 GMT +0200 (Western Europe (DST) Geschäftsschluss : 27 März 2018 11:00 GMT +020 ...

Filling installations (aseptic) TETRA PAK TBA 21 1000 SQUARE


TETRA PAK ASEPTIC CARTON FILLING LINE TYPE: TBA 21 1000SQ 1000 ML SQUARE FORMS YOM: 2002 WORKING HOURS: 14.000 TETRA CAP APPLICATOR 88 TETRA EASY RIDE CONVEYOR

Filling installations (aseptic) TETRA PAK TBA 21 1000 SQUARE


TETRA PAK ASEPTIC CARTON FILLING LINE TYPE: TBA 21 1000SQ 1000 ML SQUARE FORMS YOM: 2002 WORKING HOURS: 14.000 TETRA CAP APPLICATOR 88 TETRA EASY RIDE CONVEYOR

Trailer mounted aerial platforms TEUPEN LEO 23


Hoist TEUPEN LEO 23 to have a look: 07-320 London, Ontario VERY GOOD CONDITION! NET PRICE: 135 000 EUR Year of manufacture 2006 feel free to contact-phone: (0048) 570 188 117 Marcin Rejch for sale lifter TEUPEN LEO 23 metres. DOCUMENTATION OF ...

Thread Rolling Machines MICHIGAN ROTO-FLO 3725


Type: Rolling rack ROLLERS NUMBER: 2 Capacity: Ø 50 mm. Power: 19 Kw YEAR built: 2000 Notes: Performs processing of rolling and threading-1650 mm total stroke. -Can mount 330 + 330 mm 610 + racks simultaneously. Accessories: Siemens Simatic S5-100 ...

Thread Rolling Machines MICHIGAN ROTO-FLO 3225


Type: Rolling rack ROLLERS NUMBER: 2 Capacity: Ø 50 mm. YEAR built: 1997 Notes: Performs processing of rolling and threading-1260 mm total stroke. -330 mm 610 + racks can be mounted. or 330 330 330 + 3 simultaneously from racks + mm. Accessories: S ...

Gas Turbine CC Power Station Siemens SGT 800 Gas Turbines 200 MW


200 MW Siemens SGT-800 Gas Turbine Power Plant Three (3) Siemens SGT 800 Gas Turbines, Siemens Steam Turbine, 3000 rpm, 50 HZ, Commissioned Year: 2013, (3) HRSG, RMS station, HV switchyard,, electrical systems, control systems, air systems, cooling sys ...

Injection moulding machine for preforms HUSKY HyPET120 P85/95 E85


Injection moulding machine for preforms HUSKY HyPET 120 P85/95 E85


Injection moulding machine for preforms HUSKY HyPET 120 P85/95 E85


Husky Injection Molding for PET Preform Machine from 2011 HUSKY HyPET 120 P85/95 E85 It includes the following auxiliaries: · Inclined conveyor, brand P. K. General, 2012 · Mold dehumidifier - Matsui SGP-1200P, 2012 (drying capacity: 350 kg/hr ...

Injection moulding machine for preforms HUSKY HyPet 300 P100/110 E120


Husky HyPET300 P100/110 E120 IMM system for preforms from 2006 Including: Husky 72 cavity HyPET Hot Runner Husky 72 cavity HyPET Cold Half with EOAT and CoolPik Plastic Systems Dehumidifier Plastic System Conveyor Motan Dryer LUXOR 1200 A  ...

Injection moulding machine for preforms HUSKY GL300 P100/120 E140


Truck mounted aerial platforms Volvo Ruthmann 30m


HOIST Ruthmann 30 Volvo to have a look: 65-153 Zielona Góra VERY GOOD CONDITION! NET PRICE: 160 000 EUR Year of manufacture 1999 r. Course 8500 mth feel free to contact-phone: (0048) 570 188 117 Marcin Rejch Buy hoist Ruthmann 30 Volvo. ...

Shelves for pallets Cantilever diverse diverse


Wide selection of cantilever racking: one-sided, two-sided, new or used by different manufacturers. Cantilever racking is rather easy to install and reconfigure. With the absence of actual shelves, adjusting the height and angle of the arms is simple a ...

Labelling machines SACMI Opera 200RF


SACMI Opera 200RF labelling machine for PET bottles with polypropylen labels roll fed OPP with hot melt, with 18 platforms, capacity up to 30.000 bph. The machine will be completely overhauled and is supplied with new format and label tooling.

Blow molding machines KRONES Contiform S8


KRONES Contiform S8 PET blow moulding machine with 8 molds, capacity upgraded to 14.000 bph, quick change molds, neck personalization 38. Suuplied with complete preform feeding system and Tanner preforms tipper. The machine is in very good condition, o ...

PET Preforming machines HUSKY SX 600 P


HUSKY PET preform injection moulding machine: Model SX600 P 120 /140 E 140 dismantled are being sold as spare parts .With or without molding forms Futher specs: Year: 2010 • Tonnage 600 • Shot Size 236 oz (201 oz PET) • Tie Bar Spacing 40.8" x 4 ...

Mixers and vacuum mixers MM Servis 400


A new mixer produced by MM Service ltd. For homogenous mixing of forcemeat and spices, two mixing arms with paddles , mixing in both directions, easy cleaning, high class motorreductors, stainless steel housing, capacity - 400l.

Mixers and vacuum mixers MM Servis 250


A new mixer produced by MM Service ltd. For homogenous mixing of forcemeat and spices, 2 mixing arms with paddles, mixing in both directions, easy cleaning, high class motorreductors, stainless steel housing, capacity - 250l.

Trailer mounted aerial platforms Omme 11000R


Auction name: Partner auction BVA Auctions & Dechow | stock liquidation (53021) Online auction Start of auction: 27 November 2017 16:00 GMT +0200 (Western Europe (DST) Closing time: 11 December 2017 10:00 GMT +0200 (Western Europe (DST) The pric ...

Valves MOKVELD RZD-RQX-TC DN8”


Surplus new MOKVELD RZD-RQX-TC DN8” Class1500RTJ Axial Control valves Equipped M-425-1VO-6 actuator [x2 HOTBYPASS] [x2 ANTI-SURGE] 2003y ASTMA352LCC Natural gas T-45…+200C Excess stock lot Never been installed Long terms storage Pre-sales marketing EXW Ru ...

Injection Molding Machine for PET Preforms Husky GL 300 PET P100/120 E100, 15.000 bph


Injection Molding Machine for PET Preforms, Husky GL 300 PET P100/120 E100 This is a complete preform production line from granule feeding to PET bottle preform conveyor. The equipment was made by Spanish Husky Injection Molding Systems S.A on year 19 ...

Scaffalature Marcegaglia


For sale exclusively on next 6 December at 11 to Valleggia of Quiliano Cantilever shelving Marcegaglia + (8 posts and 13 arms) + Electric Platform For more information contact us at 0307751645

Injection Molding Machine for PET Preforms Husky G 600 PET 19.000 preforms/h


Injection Molding Machine for PET Preforms, Husky G 600 PET, year 2000 This is a complete preform production line from granule feeding to readymade PET bottle preform conveyor. The equipment was made by Husky Injection Molding Systems S. A. (Spain) on ...

WARTSILA 20 CYLINDER HEADS WARTSILA 20


WARTSILA 20 CYLINDER HEADS FOR SALE 6 PCS AVAILABLE FROM STOCKS. COMPLETE WITH VALVES, ROCKER ARMS, FUEL INJECTORS. SUITABLE FOR WARTSILA 6L20 & 8L20 & 9L20 ENGINES. CONNECTING RODS, PISTONS, CYLINDER LINERS, FUEL PUMPS ETC... -PLEASE ...

SKL VDS 29/24 AL-2 CYLINDER LINERS SKL VDS 29/24 AL-2


WARTSILA 32E CYLINDER HEADS FOR SALE 30 PCS AVAILABLE FROM STOCKS. COMPLETE WITH VALVES, ROCKER ARMS, FUEL INJECTORS. CONNECTING RODS, PISTONS, CYLINDER LINERS, FUEL PUMPS ETC... -PLEASE CONTACT FOR OTHER REQUIREMENTS OF WARTSILA 32E  ...

LXS lockseamer muffler bodymaker EAGLE LXS 1002


Machine for production muffler / Exhaust body. Forms sheet metal into required section then lock seams to mechanically lock. Maximum Axis 305mm Maximum length of body 1000 mm

Multi Spindle Drilling Machines VITAP T21


Boring machine VITAP model T21: - head at 21 chucks with fast attachments - vertical and horizontal boring work - complete of reference fences Machine at CE norms

Compressors DEMAG - MTA START015 - E2000


Compress air station, at CE norms, composed by: - screw compressor DEMAG model START 015, motor hp 15 , air capacity 1,7 m3/min at 7,5 bar - air dryier MTA model E2000, motor hp 0,8 - horizontal air tank CECCATO , capacity 300 lt
Find used machinery dealers in your country