rm used for sale

Available in stock 1 x Used Bryan Donkin RMG Gas Pressure Regulator RMG-BD226 (FIG 226 ZSO-ECL). Designed primarily for control of fuel feeds to industrial and commercial burners, heater units, boilers and other items of equipment where an accurate, safe and reliable controlled pressure is required. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 2 x Solenoid Valves DN65 PN16 1 x Gas Filter DN65 PN16 The equipment is used but in good working conditions. Outlet Pressure Range: -3 mbar to 3 mbar Maximum Inlet Pressure: 0.1 bar DN 65 PN 16

- The classic must press nominal power up to 180 kg/h engine power press 1.1 (1.5) Muehle 1.5 (2.0) kW (PS) Electrical connection 400V 50Hz (Electrical connection 400V 50Hz (Electrical connection 400V 50Hz ( 3 phases) Electrical fuse 16 A Laenge 1000 mm width 900 mm Height 1700 mm Hehe Assumption 1770 mm Weight 216 kg material Polystyrene, basket and Muehle in 1.4301 / AISI 304 Press force 16.1 to Press pressure 320 bar Juice yield up to 65% connection for juice drain 30mm High juice drain 480 mm High marc ejection 580 mm Supplied 1 press bag 60l, 3 inserts 38cm, 3 press inserts made of acacia wood 38cm ; New machine - best condition

Rated power up to 300 kg/h engine power press 1.5 (2.0) Muehle 1.5 (2.0) kW (PS) Electrical connection 400V 50 Hz (3 phases) Electrical fuse 16 A Laenge 1200 mm width 1000 mm He 1880 mm Basket and juice tray in 1.4301 / AISI 304 press force 24.2 to Press pressure 380 bar Juice yield up to 65% Connection for juice drain 30mm High juice drain 525 mm Hoehe Marc ejection 585 mm Supplied 1 press bag 100l, 3 insert huellen 48cm, 3 Press inserts made of acacia wood 48cm ; New machine - best condition

- replaceable stainless steel sifties for adjusting the grinding unit - food-grade - self-sufficient use or mounted directly on pre-basket presses nominal power up to 650 kg/h engine power 1.5 (2.0) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A La 496 mm width 434 mm He 885 mm He he with frame 1360 mm Hehe Assumption 1360 mm Weight 28 kg weight (without / with frame) 28 / 42 kg material 1.4301 / AISI 304 Hoehe mash release 690 mm Supplied cutter 8mm ; New machine - best condition

- Adjustment of the grinding unit - for the crushing of various fruit varieties food-grade nominal power up to 1000 kg/h engine power 2.2 (3.0) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 532 mm width 519 mm 1151 mm Hehe with frame 1532 mm He he Assumption 1532 mm Weight 45 kg weight (without / with frame) 45 / 59 kg material 1.4301 / AISI 304 Hoehe mash release 666 mm Supplied New machine - best condition

- for the production of mash - easy operation and easy cleaning nominal power up to 4200 kg/h engine power 5.5 (7.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A Laenge 7 30 mm width 690 mm Hoe 1410 mm Height assumption 1410 mm Weight 88 kg material 1.4301 / AISI 304 Hoehe mash release 470 mm Supplied New machine - best condition

Model RMH 50 x 30 - 65 machines dimensions without preloading box / side case box L x B x H / in metres 4.10 x 1.40 x 1.95 loading box dimensions: L x B x T / in cm: 110 x 50 x 54 parcel dimension in cm: 50 x 30 x material amount engine kW / volt: 11 / 400 ///// Optionally with 22 kW / 400 mole lid pressure in T.: 40 mole lid cylinder piston rod diameter: 160 mms ground rams pressure in T 65 Optionally also with 100 or 150 metric tons press force ground ram piston rod diameter: 200 mms working pressure in BAR: 200 Presszyklus/seconds: 60 weight in kg: 4900 control: by hand optionally also with lateral preloading box available

The first arrangement which earns the name MINIgranulieranlage really. Completely instal on a stage with the compact measuring of 1,500 x 1,400 mms and a whole height of 2,300 mms the most compact one is of this arrangement probably what presently at the market is available. With a whole achievement admission of 6.22 kW can be processed up to 100 kg of mixing cable per hour. equipped with the proven dry dividing technology this arrangement is conceived in particular for the processing to budgetary cables. On this occasion, metal-sided you receive cleanness from 99.9%. Plastic-sided the metal losses on

Technical data: model: RMH 60 x 40 – T 100 or T - 150 machines dimensions without preloading box / side case box L x B x H / in metres 4.50 x 1.60 x 2.10 loading box dimensions: L x B x T / in cm: 130 x 60 x 61 parcel dimension in cm: 60 x 40 x material amount engine kW / volt: 15 / 400 or 22 / 400 mole lid pressure in T: 50 mole lid cylinder piston rod diameter: 160 mms ground rams pressure in T: 100 or 150 ground ram piston rod Durchmesser:220 mm working pressure in BAR: 200 Presszyklus/seconds: 60 weight in kg: 6600 control: by hand the RMH 60 x 40 metal press and scrap metal presses is likewise able to come with lateral hydraulic preloading box are delivered and also with different Press force in the ground ram, 100 metric tons and 150 metric tons.

Technical data: engine: 7.5 kW / 400 V weight: 1.8 t mole lid pressure: 20 t ground rams pressure: 40 t working pressure: 220 BARS filling box dimension (L x B x T): 81.5 cm x 35 cm x 51 cm parcel dimension (L x B x material amount): 35 cm x 20 cm x variable length (material amount) Presszyklus: approx. 1 minute dimensions (L x B x H): 2.45 metres x 1.20 metres x 1.40 metres CE norm

Manufacturer: Gertrud Diebels recycling machines Industry Cable Stripper Model: RMH 80 Diameter range: 1 up to 80 mm Drive: 1.5 KW/400 v

The cable granulating system RMH 1 d grinds cable with different dimensions (for example household installation cable, industrial cable) and then separates the metal and plastic fraction on the dry cutting table. The material between a high-speed rotor blades and the blades of the stator is open-minded when the cable in the granulator. Is at the same time the cable is crushed and peeled off the plastic coating or plastic coating.   When the separation on the dry cutting table, the ground copper-plastic mixing group is applied evenly on the inclined work screen. The vibration of the work screen and the smooth air flow enables the mixed fraction into a flowing State. This fall the specifically heavier particles (copper) on the sieve and the specific smaller particles (plastic) swimming. The heavier particles (copper) are promoted through the support movement of the work screen slowly ...

Cable granulation system RMH 2 D Granulator: 11 KW Connection value: 19.6 KW Weight: 2.450 kg Capacity: 100-250 kg/with shredder up to approx. 300 kg/H Optionally available with shredder/belt system with permanent magnet

The cable granulating system RMH 2D grinds cable with different dimensions (for example household installation cable, industrial cable) and then separates the metal and plastic fraction on the dry cutting table. The material between a high-speed rotor blades and the blades of the stator is open-minded when the cable in the granulator. Is at the same time the cable is crushed and peeled off the plastic coating or plastic coating.   When the separation on the dry cutting table, the ground copper-plastic mixing group is applied evenly on the inclined work screen. The vibration of the work screen and the smooth air flow enables the mixed fraction into a flowing State. This fall the specifically heavier particles (copper) on the sieve and the specific smaller particles (plastic) swimming. The heavier particles (copper) are promoted through the support movement of the work screen slowly  ...

Granulator/granulator directly from stock available! Can be used in the cable processing and cable recycling, Kunstoffzerkleinerung and destruction of plastic and plastic parts Granulator/Schneidmühle type: RMH 16/22 VGA _ 4 KW drive power (further data see table) other granulator/granulator on request) RMH 16/22 VGA/power: 4 KW RMH granulator features: -In the RMH granulator RMH, a knife set is installed. -A sieve is fitted (drill holes on request.). -The following filter inserts are available standard production: 1.5 mm, 2 mm, 3 mm, 4 mm, 5 mm, 6 mm -V cutting geometry â Lenze electric motor / Schneider Electric box and breaker -Slight tilt of the filler funnel -Available with wheels/2 x fixed castors/2 x brake castors or adjustable rubber-mounted feet -With various trays available 1) Insert as box, here the material out of the box out can be tilted (2) slide ...

Automatic control: At the push of a button, the machine automatically closes the pre-loading box and the upper Lid (the pestle is extended). Then the front lid opens and the bale is ejected. Then the front lid (the upper one) closes The lid opens and the pestle goes back and the machine waits for another push of a button (filling the pre-load box). Metal press RMH 33 S_ 30 x 30 (new machine type: metal press) Manufacturer: RMH Type: RMH 33 Package dimensions in cm: 30 x 30 x material Package Weight: 30 - 50 kg Total weight: 5500 kg Dimensions Box (WxHxL): 30 x 50 x 100 cm Dimensions Machine (WxHxL): 120 x 85 x 410 cm / without preload box Cycle time: 60 seconds Drive: 30 KW Compression force: 60 T Horizontal ramming compression force: 100 T Working pressure: 300 bar Control: Automatic

Servo motor + electric sled, EMMS-AS-70-M-LS-RMB + EGSK-46-200-10P, Festo, used Top Attention: Original Festo product - No replica from… Special price ! If you have a VAT number we will gladly issue an invoice without VAT. As good as new! From my assessment, the linear actuator is as good as new, but is sold as used. The part was purchased from a spare parts store of a company and has never been in operation. The actuator was installed, tested, disassembled and stocked in the spare parts warehouse as a replacement linear actuator. Servo motor EMMS-AS-70-M-LS-RMB, Festo Electric slide EGSK-46-200-10P, Festo Functional guarantee! For second hand parts we can not provide a conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase ...

Dear Sir or Madam, for you in the offer : Granulator/cutting machine available directly from stock! Can be used in cable processing/cable recycling, plastic shredding and destruction of plastic and plastic parts Granulator/Granulator/Granulator Type: RMH 16/22 VGA _ 4 KW Drive Power (See table for more data) Other granulator/cutting machine on request) RMH 16/22 VGA/drive power: 4 KW Features RMH Granulator: - A knife set is installed in the RMH Granulator RMH. - A sieve insert is installed (perforation as desired.). - The following screen inserts are available in stock: 1.5 mm, 2 mm, 3 mm, 4 mm, 5 mm, 6 mm - V- Section Geometry - Lenze Electric Motor / Schneider Electric Box and Circuit Breaker - Easy tilting of the filling hopper - Available with wheels/2 x fixed castors/2 x brake rollers or adjustable rubber-mounted feet - Available with different bays 1) ...

CATALOG NO. 7191 TECHNICAL DATA - loading hopper inlet 870x735mm - rotor working width 720mm - main engine 18.5kW - pump motor approximately 0.75kW - number of knives 17 pcs - knife dimensions 80x40mm - 20mm sieve - pressure drawer - electric autoreverse - outlet for chipped wood, diameter 250 mm - dimensions length/width/height 2000x1350x1370mm - weight 1586kg ADVANTAGES – pressure drawer - very good condition – used chipper The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 38900 PLN Net price: 8644 EUR depending on the price 4.50 EUR Net price: 10237 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulders, Planer, ŻEFAM ,DZSB-40, Planer in poland, Planers and Moulder ...

MARK RMB 18 IVRD screw compressor was built in 2020 in Italy. The machine, consisting of reliable components, a robust housing and an easy-to-use control panel, delivers the highest quality compressed air, free of water vapour that is harmful to tools and machinery. Thanks to innovative solutions such as an efficient drive system and a perfectly optimised asymmetrical screw module, the MARK RMB 18 IVR oil-injected screw compressor saves up to 35% in energy consumption while maintaining the highest possible energy efficiency. The offer also includes a capacious tank and an integrated air dryer. The MARK screw compressor weighs 375 kg. Technical data of the MARK RMB 18 IVRD compressor - motor power: 18.5 kW - working pressure: 7 bar - maximum air pressure: 13 bar - minimum air pressure: 5.5 bar - maximum capacity (7 bar pressure): 210 m3/h - minimum capacity (7 bar pressure): 47 m ...

Demo Machine Specifications:  Dimensions - 1300 x 1560 x 1210 mm, (with built-in drive and control cabinet)  Dimensions of the packed machine - 1500 x 1800 x 1320 mm,  External dimensions of the mill drum - Ø870 x 1120 mm,  Distance between bearings - 1260 mm,  Height of the drum axis - 860 mm,  Operating capacity - 600 dm3,  Weight of the machine - 641 kg,  Installed power - 5.5 kW,  Input voltage/frequency - 400V/50Hz,  Connector - 32A; 400 V  Milling time range - 1s... 99h59min,  Mill installed on a steel frame,  Drum made of 10 mm steel without inner lining. including first filling 80 mm steel balls Technical specification:  Dimensions - 1300 x 1560 x 1210 mm, (with drive and control cabinet installed)  Dimensions of the packed machine - 1500 x 1800 x 1320 mm,  Mill drum external dimensions - Ø870 x 1120 mm, � ...

Stroke Machine Stirring Machine Rego Model: SM 4 RMT overhauled with LED automatic timer The machine when it comes to striking! 2 working functions: 1 x stirring / 1 x beating Working shaft/stirrer shaft reworked Powerful and robust technology Boiler lighting, timer EMERGENCY STOP protection circuit DGUV V 3 tested Connection 400V, 2 kW,16A-CEE plug Dimensions: 720 x 680 x 1710 mm, WxDxH Weight approx. 285 kg. Quality from a specialist company! Used machine overhauled 3 Months Warranty + Spare Parts Service Option: Other accessories Ring Gas Burner Boiler New Brushes New Whisk New Wendering / Kesselring Maintenance contract Service Package Delivery Instruction & Commissioning More TOP mixers in stock!

Star Ball Mill, Rotor Ball Mill, Centrifugal Ball Mill, Centrifugal Ball Mill Used. Manufacturer: EHINGER IMPIANTI Type: RM 150 Achievable grain sizes: with dynamic classifier: 0-20 μ and 0-300 μ with static selector 0-2 mm Average continuous output approx. 1.6 t of glass per hour Motor SIEMENS 75 kW 738 rpm 400 V Dimensions approx. 2850 x 4100 x 5000 mm original matching dust filter with fan The mill pictured serves only as a sample. The mill for sale is currently being revised. These mills are now being built by Eirich as an OrbitMill for the fine grinding of industrial minerals. Performance data of the Orbit Mill according to the manufacturer as an example of limestone. Air flow rate 13000 m³/h Limestone Throughput d97= 20 μm : 1.6 t/h d97= 40 μm : 3.3 t/h d97= 105 μm : 6.0 t/h The mill pictured was used in glass recycling. Four balls, which a ...

Description Electrical charge

Features: Used Passage Flap / Folding Element from the manufacturer Interroll RM 8830 Condition: fully functional with signs of wear Expertly dismantled and packed Price per piece Technical data: Dimensions of the folding element Total length: approx. 1,300 mm Total width incl. feet approx.: 890 mm Conveyor width: approx. 660 mm Min. height upper edge of roll: approx. 700 mm Wheelbase: approx. 75 mm Roll diameter: 50 mm Drive type: 24V motor Stock: 10 pieces Price per piece Internal Article Number: 2026022401 Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods! We would be happy to make you an individual offer or advise you on the design or installation questions. Simply let us know your needs and the local conditions. Take adv ...

This machine is particularly suitable for the processing of electric wastes with PVC and rubber. Hole Guide for small diameter from 1 to 10 mm. Quick clamping diameter setting for the large diameter. Adjustable pressure roll continuously over a quick Collet with one hand adjustable. Holes on the base plate to the fasten the machine on a table or work bench.

Machine vise, sturdy vise, drill vise -Span width: 138 mm -Jaw width: 160 mm -Back height: 45 mm -Dimensions: 500/350/H160 mm -Weight: 50 kg

Three-phase motor, electric motor -Power: 10 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: - -Dimensions: 550/360/H370 mm -Weight: 121 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: STM, geared motor type RMI 50 D -Speed speeds: approx. 14 rpm i= 1/100 -Manufacturer engine: TeKell type M63B4 -Power: 0.187 kW / 1390 rpm -Shaft: Ø 24 x 90 mm -Dimensions: 210/215/H345 mm -Weight: 10 kg

Table machine RMH 52 for peeling cables. 18 meters per minute, 230 V Diameter of cable: 1-52 mm

Table machine RMH 65 for peeling cables. 18 meters per minute and 230 V 25 meters per minute and 400 V diameter of cable: 1-65 mm

Table machine RMH 65 Q for peeling cables. 18 meters per minute, 230 V with anti-crushing device 25 meters per minute and 400 V with anti-crushing device Diameter of cable: 1-65 mm

gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: STM, gear motor type RMI 40 FL SIN -Speed: 377 rpm i= 1/7 -Manufacturer Motor: ABB 0.37 kW -Shaft: Ø 19 x 80 mm -Dimensions: 315/200/H160 mm -Weight: 7.6 kg

Table machine RMH 85 Q to peel by cable. 18 meters per minute, 230 V with anti-crushing device 25 meters per minute and 400 V with anti-crushing device Diameter of cable: 1-85 mm

Barrel press RMH 200 Electric motor: 5.5 KW, 400 V, 50 Hz Pressure: 25 T Press cycle: 58 seconds W x D x H: 1200 x 1000 x 2800 mm

Tape straightening machine with feed roller pair, upper half hydr. foldable, roll width max. 320 mm, rollers 60 mm, otherwise see pictures

This machine is particularly suitable for the processing of electric wastes with PVC and rubber and is almost entirely made of aluminium. Heavy drive wheels enable the modification of large cable diameters. Hole Guide for small diameter by 1-52 mm. Hole Guide for large diameters of 30-100 mm and 30-120 mm. The RMH 100/120 has a two blade system and is forward and down. The knife systems can be used simultaneously. Holes on the base plate to the fasten the machine on a table or work bench. Cutting speed 25 m / min

This machine is particularly suitable for the processing of electrical waste with PVC and rubber. Diameter range 2 - 115 mm Cutting speed 35 meters per minute Weight 350 kg

Intact Vacuum skin packer Model: RM571 Serial: 8215 Stainless vacuum skin packer, chamber dimensions 700mm x 500mm x 110mm, adjustable timer controls, various moulds, 3Ph

sheet width: 2500 mm plate thickness: 30 mm pre-bending: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 2210015 Type of machine Hydr. 3-roll bending machine Make HAUSLER Type RMA 2500/30 Build in 1962 Type of control conventional Additional information max. widht 2500 mm Max. plate thickness 30 mm 3 rolls diameter upper oll 450 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECULAS BISCUIT LINE - INCLUDING PACKING MACHINE , DISPENSER , BISCUIT LINE, OPEN , MULTIHEAD PACKING MACHINE

material width:450 mm material thickness:0,5 - 1,0 mm no. of straightening rolls:6 straightening roll diameter:53 mm number of draw-in rolls:2 diameter of draw-in rolls:96 mm power requirement:1,0 kW weight:0,65 t dimensions (WxDxH):1,0 x 1,0 x 1,55 m

RMH G 60 New Manufacturer: RMH Roller cutting width: 2000mm Roller cutting height: 1200mm Dimensions ( L x W x H ): 3100 x 1300 x 2500 mm Drive: 11 KW Manual and automatic working procedure Two-handed operating system Cutting force: 2 x 30 cylinders (60 tons cutting force) Total weight: 4200kg

Selectomat System Schlatter RMB EMBA 18

RMH G 25 New Manufacturer: RMH Roller cutting width: 1200mm Roller cutting height: 1300mm Dimensions ( L x W x H ): 2200 x 1300 x 2500 mm Drive: 11 KW Manual working procedure Two-handed operating system Cutting force: 25 tons (1x cylinder) Total weight: 3600kg

material width: 300 mm material thickness: 3 mm no. of straightening rolls: 7 weight of the machine ca.: 0,5 t dimensions of the machine ca.: BxTxH m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications of the straightening machine RM2300/8/9 Engine power in KW: 22KW Straightening machine width: 2300 mm Max directional width 2200 mm Straightening rollers Number: 9 pieces Straightening roll diameter: 95 mm Support rollers Number: 22 pieces Support rollers below: 12 pieces Support rollers on top: 10 pieces Sheet thickness max: 8 mm

CATALOG NO. 7220 TECHNICAL DATA - min – max width of the processed element 20 – 230mm - min – max height of the processed element 8 – 160mm 7 spindles: 1) horizontal bottom 230mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm 5.5kW 4) vertical right 160mm 5.5kW 5) vertical left 160mm 5.5kW 6) horizontal top 230mm 7.5kW 7) horizontal bottom 230mm 7.5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - spindle speed 6000 rpm in advance: - 10 pulling, toothed and metal input rollers, including 2 double rollers - 3 side pressures from down: - pressure from the side at the insertion - input shaft, toothed, pulling, turning in the lower tabletop - 2 pressure points from the side - grooved top - drawing roller, metal, grooved - drawing roller, metal, smooth - pneumatically adjustable rollers - length of the introductory tab ...

RMS Vibration Vibration Test System Here we offer you an RMS Electrodynamic Vibration Vibration Test System. RMS Vibration Vibration Test System Test Manager SWR 900 Vibration exciter SW 3006 30V-50A-3434 N Power amplifier TGA 3000-000.00 Condition: used Unchecked! Tests were not possible Scope of delivery: (See picture) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone. Written order possible by email or fax

Available in stock 2 x Used RMG Solenoid Gas Valves DN65 PN16, model 01-EVA 25 NH-4. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 1 x Gas Filter DN65 PN16 1 x Gas Pressure Regulator DN65 PN16 The equipment is used but in good working conditions. VDC: 24 Power: 70 W Maximum Inlet Pressure: 0.1 bar Environment Temperature: -20ºC to +60ºC