ripper used for sale

Varnish removal spray booth 3000mmbreit2000mmhoch Suction capacity 10000 m³ air of heating register 10500 m³

A used fan is sold: Rippert RV80 - 800-765-B5 Year 2007 (2017 overhauled) 27000m ³/h Booster 1262PA

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -for: painting wall, painting booth -Motor: Ex protected -Motor power: 3.6 kW -Speed: 1440 rpm -Connection input: O mm -Connection output: 450 mm -Dimensions: 1260/1100 / H815 mm -Weight: 188 kg

radial fan, dust extraction blower, fan, extraction, dust blower -Motor power: approx. 3 kW -Inlet connection: Ø 230 mm -Output connection: 335 x 290 mm -Impeller: Ø 340 mm -Dimensions: 540/580/H660 mm -Weight: 80 kg

Manufacturer: Rippert, Type: ST 80 2500 R, Working widht max mm: 2000, Max. working depth in mm: 800, rotations rpm: 2900, Engine power kW: 1,5, Flow rate approx. m3/h: 1600, Working height in mm: 835, FREE TEXT: 2 Staubkästen/Filterreiniung,

radial fan, dust extraction blower, fan, extraction, dust blower -Type: HL8-355/595-A -Motor power: 15 kW -Speed: 2900 rpm -Volume flow rate: 10,000 m³/h -Total pressure: 3500 Pa -Inlet connection: Ø 350 mm -Outlet connection: Ø 350 mm -Dimensions: 2000/1000/H1350 mm -Weight: 260 kg

Rippert HL9-630/1070-Bex Extraction system Type : HL9-630/1070-Bex Position : LG 0 Volume : 27,500 m³/h Pressure Increase : 3,750 Pa Density: 1.2 kg/m³ Power Input : 39.0 kW Temperature max: 40°C Temperature Medium: 40°C Motor Capacity : 45.0 kW Speed : 1,450 1/min (RPM) Max. Speed: 1,450 1/min (RPM) Special Speed: 1,450 1/min (RPM) Capacity: 100,000 m³/h Filter hoses: 462 pcs., 4190x140 mm Ø, PE – needle felt 400 g/m², antistatic, calendered, with test certificate class M, the filter hoses were only completely replaced in 12/2022 Support type: Spiral springs for hanging in tabs of the filter hoses Find more here - / Contact us at -

Ventilation system, Comfort compact ventilation -Volume flow rate: 6000 m³/h -Engine power: 1.85 kW -Dimensions: 1950/1100/H1200 mm -Weight: 260 kg

Manufacturer: Rippert, Type: HOW TK 8000, Year: 2000, Control: yes, Channel width in mm: 1400, Channel height in mm: 2050, Channel length in mm: 8000, Chain transportation system length in mm: 13.900, Thermal output: 32 kW, Max. air temperature: 30, Damper register - items: 1, Exhaust air m³/h: min 500, Lösungsmittelmenge g/min: 160, Year :2000

Manufacturer: Rippert, Filter system - positive pressure: yes, Volume flow rate m³/h: ca. 7.500, Number of filter filter gallerys: 2, Required space L x W x H mm: 4.800 x 1.800 x 4.700,

Manufacturer: Rippert Düsentrockner, Type: DTK 041, Year: 2004, Work piece width min-max mm: 800, Channel length in mm: 7000, Revisionsklappen: yes, Gehäuse Wärmeisoliert mm: yes, Kanaltemperatur Grad: 50, Umluftleistung m³/h: 4600, Ex geschützt: no, Temperature regulation: yes, Min.-max. workpiece height in mm: 60, Conveyor lenght mm: 8000, Feedin speed m/min: 1-6, Belt conveyor: yes, Air speed in jets: 25 m/s, Flat spray nozzle: yes, Damper register - items: 1, Year :2004

Manufacturer: Rippert, Type: IR Vorwärmodul, Year: 2005, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 10-80, Working widht max mm: 1300, Number of lamps: 6, Position of lamps: gerade, Power per lamp: ca.3, od distance mm: ca.80, Feeding speed m/min: 3-15, FREE TEXT: Lampen müssen erneuert werden, Year :2005

Manufacturer: Abdunstwand , Type: Rippert mit Rohrventilator, Channel width in mm: 3200 mit Rippe und 1000 ohne, Channel height in mm: 2000,

Manufacturer: Rippert, Type: DTK 7000, Year: 1995, Work piece width min-max mm: 1300, Channel length in mm: 15.000, Kanaltemperatur Grad: 56 / 70, Umluftleistung m³/h: 2 x 8.650, Abluftleistung m³/h: 2 x 780, Raumluft m³/h: 2 x 780, Mischluftventilator kW: 2 x 7,5, Thermal output: 2 x 36, Belt conveyor: yes, Air speed in jets: 25, Max. air temperature: 56 / 70, Heated by: Wasser, Damper register - items: 2, Solvent quantity g/min: 2 x 12.390, Year :1995

Manufacturer: Rippert, Year: ca 1990, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 350, Min.-max. workpiece height in mm: 80, Number of lamps: 2, Lampen gerade eingebaut: 2, Lampen von unten: no , Adjustable: halblast, Conveyor lenght mm: ca. 2500, Year :ca 1990

Manufacturer: Rippert, Type: Absaugventilator, Year: ca.1995, Diameter intake mm: 155 , Engine power kW: 1,3, Flow rate approx. m3/h: 1500, rotations rpm: 2860, Direkt drive: yes, Wight approx. kg: 60, Required space L x W x H mm: 800 x800 500, Vorführung möglich: yes, Year :ca.1995

Manufacturer: Rippert, Type: N-355 B, Year: 1995, Diameter intake mm: 355, Engine power kW: 3, Flow rate approx. m3/h: 3000-6000, rotations rpm: 1415, Direkt drive: yes, Pressing: 1080, Wight approx. kg: 200, Required space L x W x H mm: 1000 x1000, Year :1995

A misted Rippert wet separator system in stainless steel design is available for the painting process. Working width: 5000mm, exhaust air capacity: 18000m³/h, water capacity: 700l. Stainless steel chimney included. On-site inspection is possible.

A complete painting system is available. Components: (1) overhead conveyor, (2) spraying area/brush wall, length: 4000mm, width: 1500mm, height: 4800mm, with Maxon burner, suction pipe, drawers for dry paint disposal, six filter mats, various filters, (3) evaporation area, (4) drying booth, length: 6500mm, width: 5200mm, height: 3150mm, with Weishaupt WG10N/1-D ZM-LN gas burner. Overall system dimensions: 24,000mm/10,000mm, max. output: 45kW. Documentation is available.

radial fan, dust extraction blower, fan, extraction, dust blower -for: paint wall, paint booth -Motor: Explosion-proof -Engine power: 5.0 kW -Speed: 1455 rpm -Inlet connection: Ø 430 mm -Outlet connection: Ø 450 mm -Impeller: Ø 660 mm -Dimensions: 1350/900/H1240 mm -Weight: 236 kg

centrifugal fan, dust extraction fan, fan, suction, dust blower -Manufacturer: Rippert, centrifugal fan in soundproof housing -Type: HL560/710-200 -Motor: 5 kW 1435 rpm -Volume flow: 12,000 m³/h -Inlet/Outlet connection: Ø 500 mm, see photos -Dimensions: 1945/1515/H2350 mm -Weight: 600 kg

Manufacturer: Rippert, Type: Düsentrockner, Work piece width min-max mm: 1300, Channel length in mm: 14000, Revisionsklappen: yes, Gehäuse Wärmeisoliert mm: yes, Kanaltemperatur Grad: max.80, Ex geschützt: yes, Gesamthöhe mm : 2500, Temperature regulation: yes, Druckdifferrenzschalter: yes, Min.-max. workpiece height in mm: 10-80, Working widht max mm: 1300, Working height in mm: +/-950, Conveyor lenght mm: 14500, Through running hight mm: 100, Feedin speed m/min: 5-15, Belt conveyor: yes, Air speed in jets: ca.20, Round nozzle: yes, Heated by: Warmwasser, Damper register - items: 1, 1st Damper register kW: ca.70,

Ripper tooth - ripper tooth with various mounts suitable for Martin, Geel, Winkelbauer, Baumaschinentechnik, Lehnhoff, Verachtert, Miller, Oilquick and many more. for excavators from 1t to 35t Demolition tooth made of HARDOX400 with replaceable tooth, remaining parts made of S355I2+N steel listed price is for the 1-2t excavator version

With hydraulic pusher, cutting chamber: 1000x900 mm, motor: 30 kw (40 hp). Blades: 40x40 mm. Electrical panel.

Height gauge, parallel gauge, height gauge -Manufacturer: Mitutoyo, height gauge type 192-104 -Max. Working height: 600 mm -Dial indicator: measuring accuracy 0.01 mm -Analog display: double counter -Dimensions: 275/120/H795 mm -Weight: 8.7 kg

1 Shaft Ripper with Hydraulic Pusher for Sale - Brand: SCOINER - Cutting Chamber: 1950x1850 mm - Rotor Length: 1950 mm - Rotor Diameter: 450 mm - Blade: 60x60 mm - Engine: 150 hp (110 kW) - Hydraulic unit: 15 hp (11 kW) - With electrical panel For more details or to make an enquiry, please contact us.

CW 05 hook, Tooth, interchangeable NEW Auction-ID: A3-43507-33

- Brand: SILMISA - With hydraulic pusher - Model No.: MSA.30.126 - Year: 2008 - Power: 75 hp (55 KW) - Cutting chamber: 1260 x 900 - Blade: 40 x 40 mm - With electric panel

GT-5322 2-Axis Ripper - Brand: JBF - Model: DC 50/40 - Cutting chamber: 500 x 400 mm - Motor: 9.2 KW - Year of manufacture: 2015 - With 2.70 x 0.35 feed conveyor

MF-0170 4-Axis Ripper - Brand: Weima - Model: ZM30 - Year: 2000 - Two motors of 11 KW each (15 hp) - Cutting chamber: 600 x 462

- Brand: SANT ANDREA - Model: G30/1000 - Cutting chamber: 1000 x 750 mm - Year of manufacture: 2000 - No motor or electrical panel - Blade width: 50 mm

3x special grippers for robots, includes various sensors, linear units, pneumatic components - Please note this lot is also listed as part of lot 1 and is subject to seller conformation by Panasonic, total price for lots 25 to 41 must be greater that the price for lot 1. Auction-ID: A1-45187-38

Heating medium: natural gas, Heating capacity: 75 kW Convection motor: 3.00 kW Auction-ID: A1-45447-16