rip saw used for sale

Sliding table saw HOLZKRAFT sc 2c- Exhibition machine -swivel, rip fence with fine adjustment---------- Technical data ----------suction nozzle Ã: 120 / 60 mm, work table height: 900 mm, speeds: 4,000 rpm, max. saw blade Ã: 315 mm, cutting width with parallel fence: 900 mm, cutting height 90/45Â: 100 / 79 mm, cutting length: 1,600 mm, swivel range: 90 - 45 Â, dimensions (LxW): 1,020 x 325 mm, weight: 295 kg - new exhibition machine -

Multi-Blade Saw Paul K3 / 800 Working width 800 mm Cutting height 60 mm 1 saw shaft, saw blades are adjustable via extension rings Connected load 23.5 kW Technically good condition

Key data: 500 mm

cut-off saw machine model BOTTENE TE 500 . second hand machine suitable for cutting wooden boards, packaging, windows/doors frames , furniture , pallets, garden furniture and various diam. blade mm. 500 engine power 6.5 Hp max. cutting size mm. 500 x 135(H) total length of machine cm. 507 volt. 380/50

Suitable for automatic grinding of the tooth geometry on chip and flank faces (front and back) of HM - tipped circular saw blades. All common tooth shapes can be finish-ground in one cycle (also trapezoidal flat tooth)., Accessories: Total enclosure,, Motorized chip and clearance angle adjustment, Manual central lubrication, Coolant grinding system,, 1 arbor,, 2 magnetic sawblade holders,, 4 centering sleeves,, 1 grinding wheel holder., Circular saw blade diameter: 80-810mm, Circular Saw Bore Diameter: from 10 mm, blade thickness: up to 5 mm, Tooth pitch: 7-100mm, rake angle: - 20° to +40°, clearance angle: 6° to 45°, tooth height difference: any, Bevel cut on the back of the tooth: up to 45 °, Working speed: up to 20 teeth / min., Bevel cut on the tooth face: up to 15°, grinding path max.: 20 mm, Grinding wheel bore diameter: 32 mm, Grinding wheel diameter: 125 mm, Connected load: ...

This 3-axis BIESSE Selco WN 2 was manufactured in 2020. It features a robust machine weight of 3900 kg and operates on a power supply of 400 VAC with a consumption of 12 kW. The machine is designed for efficient panel cutting and includes a CE marking for compliance. If you are looking to get high-quality panel saw capabilities, consider the BIESSE Selco WN 2 machine we have for sale. Contact us for further details.

Suitable for automatic, double-sided grinding of tooth flanks on circular saw blades with carbide tips., Accessories:, Partial enclosure,, 1 sawblade holder,, Coolant system., Circular saw outer diameter: 260 to 2200 mm, Circular saw bore diameter: 25 to 220 mm, sawblade thickness: up to 20 mm, Tooth pitch: from 10 mm, rake angle: any, Radial free angle: up to 6°, Tangential free angle: up to 6°, Grinding path: up to 75 mm, Grinding speed: 0.5 to 6 mm(s), Working speed: up to about 10 teeth/min, Grinding wheel diameter: 125 mm, Grinding wheel bore diameter: 32 mm, Grinding wheel peripheral speed: 26 m/s, Cooling lubricant pump capacity: 250 l/min, Coolant Tank Content: approx. 190 l, Connected load approx.: 6,5 kW (400 V / 50 Hz), Dimensions W x D x H =: 3050 x 1890 x 2050 mm, Weight approx.: 2160 kg, colour: green

Panel saw manufactured in 2025. This Wehrmann WT-50/900 is designed for classic cutting of wood and wood-based materials, featuring a maximum panel width of 450 mm and thickness ranging from 8 mm to 40 mm. It includes a user-friendly design with servo-controlled drives and a robust steel frame. If you are looking to get high-quality cutting capabilities, consider the Wehrmann WT-50/900 panel saw we have for sale. Contact us for further details.

A glass cutting machine Lenhardt with a Tränker automation and control is available. Strip width: 777mm, strip length: 2366mm. Documentation available. An on-site inspection is possible.

Multi-Rip Saw Paul K4G 800 Working width 800 mm Cutting height 100 mm with 2 saw shafts with fixed attachment, saw blades are adjustable via rings (1 saw shaft in the machine, 1 saw shaft to replace) a 22 kW motor is installed, the original 44 kW motor is included was used to cut 60 mm thick planks Technically good condition

Rusk Saw Knife 3 pieces NEW!  Rusk Saw Knife Baker's Saw12 blade, with wide blade3 piecesNo. 1136-12-HRostfrei, total length about 44 cm see picture for details

A metal band saw is sold. Suitable for someone who has little space available. Dismantling and removal by buyers Pallet truck and a 1.6t forklift on site. Price is 2500 Euro net plus VAT Machine can and should be inspected and tried out on site, as warranty or guarantee is excluded. Item location 90766 Fürth All information without guarantee

Manufacturer: IMET Model: Velox 350 AF-ENC Year of Manufacture: 2017 Type of Machine : Circular Cold Saw Operating hours: 5,500 Blade diameter: 350 mm Blade arbor: 22 mm Blade speed: 3,600 rpm Feed travel: 520 mm, multiple passes Control: Electronic feed control (ENC) with front panel programming Condition: Used, fully functional Included Accessories - Extraction unit included - 6-metre roller conveyor for long profiles included Find more here - / Contact us at -

Panel saw Type: K 740 S Manufacturer: Felder Year: 2023 Cutting length: 2500 -3700 mm Formatting sliding table "X-ROLL" Cutting width: 800 – 1250 mm Cutting height: 140 mm Control unit: "Power-Drive" Machine in very good condition, under power Find more here - / Contact us at -

Kullen Saw Knife No. 1135-12- E.W-H 3 pieces NEW!  Kullen saw blade, 12-blade, double-sharpWith serrated edgeEnglish styleWith saw3 piecesNo. 1135-12- E.W-HRostfrei, total length 44 cm see picture for details

Saw blade diameter vertical: 600 mm Saw blade diameter horizontal: 500 mm Notching width: at 90° processing of profiles up to 300 mm, pointed mitres up to 30° Profile height max. 280 mm Notching depth: at 90° horizontally up to 185 mm / at 90° vertically up to 230 mm Material stop: swivel 30° - 90° - 45° Swivelling material stop with detent points and display Program control for automatic adjustment of the notch height, angles and notch height Up to 6 programs can be stored Hydropneumatic material feed via 2-hand operation Pneumatic material tensioners Coolant lubrication

TECHNICAL DATA: Machine for making pallets Usable work surface: 1200 x 1200 mm Motorized loading roller conveyor: 4500 mm Motorized unloading conveyor: 2500 mm + 3000 mm (free-running) Installed power (cutting unit): 9 kW EQUIPPED WITH: Package Holder 01 Lower conveyor belt for wood waste: 8000 x 800 mm + Tiltable end ramp: 2500 mm

Bread saws 3 pieces NEW!  Bread saws for cutting through fresh bread and mares3 piecesNo. 924-10Stainless steel, total length approx. 38 cm see picture for details

Rusk Saw Knife 3 pieces NEW!  Rusk Saw Knife Baker's Saw12 blade, with wide blade3 piecesNo. 1136-12Stainless steel, total length approx. 44 cm see picture for details

Bread saws 3 pieces NEW!  Bread saws for cutting through fresh breadAnd mares3 piecesNo. 924-8-HRost-free steelTotal length about 32 cm for details see picture

Bread saws 3 pieces NEW!  Bread saws for cutting through fresh bread and mares3 piecesNo. 924-8Stainless steel, total length approx. 32 cm For details see picture

Kullen Saw Knife No. 1135-12 3 pieces NEW!  3 pieces NEW! Kullen saw knife (double)No. 1135-1212 blade, double-sharp, with serrated edge in English style, with saw, stainless steel  Total length approx. 44 cm, with wooden handle See picture for details

Double Cake and Rusk Saw Knife No. 1137-123 Pieces NEW!  3 pieces NEW! Double Cake and Rusk Saw KnifeNo. 1137-1212-Blade (saw and cutting edge) double-edged (saw and knife)Total length about 44 cm, rust-proof, with wooden handle For details see picture

Cutting range round material: 220mm, cutting range flat material: 350mm/220mm, cutting range rectangular material: 220mm/220mm, saw band dimensions X/Y/Z: 3720mm/27mm/1mm, cutting speed: 120m/min, machine dimensions X/Y/Z: approx. 2400mm/1900mm/1500mm, weight: approx. 1350kg, operating hours: approx. 1450h. The drive cylinder must be sealed. Documentation available. An on-site inspection is possible.

Code: 0343 Brand: PUTSCH MENICONI Model: SVP 950-M - CE Standard Manual vertical panel saw for carpentry workshops, for vertical and horizontal cutting of panels, semi-finished products, furniture, doors, window frames, plastics and composite materials - CE Standard Technical data: Cutting length 5300 mm Cutting height 2200 mm Max cutting thickness 80 mm Motor power 7,5 Hp Blade diameter 300 mm Blade speed 5000 rpm Automatic electric sliding table to prevent damage to the support strips during horizontal cuts Small parts support device Liftable castor device for panel sliding Overall dimensions of assembled machine: mm 6500 x 1500 x 3000 h Overall dimensions for transport: Frame mm 6500 x 600 x 2350 h - Weight kg 590 + Column mm 3100 x 1130 x 1150 h - Weight kg 600

2 Column Heavy Duty Band Saw Machine BERG & SCHMID SBS 300 VA-1/CNC Year of Make: 2019 Cutting diameter round: 300 mm Square cutting diameter: 300 mm Cutting diameter flat: 300 mm x 260 mm Belt speed: 20 – 100 m/min Modern SNC 20 control system Frequency-controlled saw drive Control buttons with pictograms Powered chip brush Belt Tension Hydraulic Clamping Pressure Regulation Work light Chip conveyor Taxiway 2 m

Inv. Num. : 9032 Type: Mec3000 Producer: Simec Created: 2019 Parameters: Switch-on hours: 9365 h Input length of the material: 6000–7000 mm. Parting diameter: 12–100 mm. Output length: 50–2000 mm.

Grecon Dimter OptiCut 304R Optimizer Length of entrance timber min. 900 mm when loading on a cross chain conveyor Wood width min./max. 40-200mm Wood thickness min./max. 15-80mm Lowering, cutting and accelerating: 0.5 – 1 sec Cutting accuracy: min. 0.8 mm, max. 1.5 mm Wood cross-sections max. 200×25 mm, 170x50mm, 80x80mm, 140×60 mm Saw blade diameter 400 x 30 mm Saw blade speed 4200 rpm. Feed max. 170 m/min Material pick-up conveyor with 6 dodgehammers Cutting Modes: 1.Cut to fixed length 2. optimization of board length to maximize efficiency, 3. removal of wood defects with chalk marking of defects Length of the entire line 21m Year of manufacture 2000

Paoloni S150 sliding table saw Trolley length 1500mm Cutting width on the right side 1410mm Scoring Scoring Shears Cutting height max 90mm Manual adjustment of the saw angle up to 45° Manual lifting and lowering of the saw 5.5kw main motor Saw size max/min 315/250mm Scoring saw size 120mm CE Certificate

IRION trimming circular saw without cross-cut saw system Saw blade Fixe ( singable ) Cut length 6200 mm

IRION Manual Pendulum Saw Adjustment 45° + / - Suction connection Top condition Motor 7.5 KW

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 54900 € : 1037.61 € : Doppelsäulenführung : 5400x41x1,3 mm : 20-100 m/min : 440 mm : 440 mm : 610x440 mm : rund 440 mm, quadrat 440 : rund 430 mm, quadrat 430 : rund 320 mm, quadrat 260 : 807,5 mm : 1.1 kW : 4 kW : 0.12 kW : 2850 mm : 2350 mm : 2000 mm : 3600 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping micro coolant equipment laser cutting line ALTERNATIVE: model BMSO 440 CGS NC (with servo instead of hyraulic feed) € 61.900,-- The data for this ad was created with ModulMWS - the sof ...

Underfloor sliding table saw, crosscut saw, sliding table saw, miter saw, panel saw, table saw, circular saw -Manufacturer: Ulmia, circular saw type 1612SP -Motor power: 2.2 kW / 2800 rpm -Saw blade: Ø 280 mm -Sliding carriage: is available -Max. cutting height 70 mm -Miter cut: up to 45° -Length stop: up to approx. 800 mm -Dimensions 1000/1340/H980 mm -Weight: 306 kg

I am selling a panel sizing saw HOLZMA HPP380/38/38, built in 2008. Cutting surface 3800x3800mm. Cutting height 90mm. Max saw blade diameter 380 + 200mm Joint area W.5867mm x D.6637mm 8 pcs gripper with pneumatic regulator Side positioning roller from below. Cadmatic 4.0 optimization software included. Very good condition. Available the same.

I am selling a panel sizing saw HOLZMA HPL380/38/22, built in 2007. Cutting surface 3800x2200mm + rear lift table. Cutting height 90mm. Max saw blade diameter 380 + 200mm Joint area W.5924mm x D.9963mm 8 pcs gripper with pneumatic regulator Side positioning roller from below. Cadmatic 4.1 optimization software included. Very good condition. Available the same.

ALFAMACCHINE T350 miter sawmill Two-Saw for 45 Degree Cutting Blade diameter 350 mm Saw hole diameter 30mm Saw speed 3000 r.p.m 2×1.5 kw motors Air Requirement 5-7 bar Cutting Width: 15-80mm Cutting height: 10-80mm

OMGA Radial 700 Radial Saw Cutting width 90° max 700mm Cutting height max 110mm Cutting deck adjustable in two planes Saw speed 3000r.p.m 2.61kw main motor Pneumatic feed of the cutting deck Net price

Miter saw, aluminum circular saw, aluminum semi-automatic circular saw, miter saw, glass bead saw -Processing of: flat, angle and solid material, pipes and special profiles -Saw blade: Ø 400 mm -Saw blade: swiveling -Drive: 2.5 kW -Speed: 2800 rpm -pneumatic material tension -pneumatic feed -with: chip extraction -Dimensions: 1100/900/H1160 mm -Weight: 238 kg

Pipe saw, pipe jigsaw, support jigsaw, reciprocating saw, handsaw Ideal for sawing work even in wet, damp rooms and shafts, wherever electric reciprocating saws are not permitted. -Output power: 1000 W -Steel pipes: up to max. Ø 160 mm -in the suitcase -Number: 4 saws available -Price: per piece -Dimensions: 690/200/H120 mm -Weight: 8 kg

ALFAMACCHINE T350 miter sawmill Two-Saw for 45 Degree Cutting Blade diameter 350 mm Saw hole diameter 30mm Saw speed 3000 r.p.m 2×1.5 kw motors Air Requirement 5-7 bar Cutting Width: 15-80mm Cutting height: 10-80mm Net price

Panel saw, panel dividing saw, horizontal panel circular saw, dividing saw -Motor power: 6 kW -Speed: 2880 rpm -Diameter max. Saw blade: 340 mm -Cutting height: 100 mm -Saw motor laterally adjustable on dovetail guide: approx. 1000 mm -Saw motor pneumatically adjustable in height -with cleaning brush: 1000 mm wide -Max. Intermediate width: 1700 mm -Dimensions: 2200/1500/H2100 mm -Weight: 1220 kg

Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw -Manufacturer: Martin, panel saw type T 70 with automatic feed -Engine power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -max. Cutting height: 90° 140 mm / 45° 110 mm -Miter cut: up to 45° -Sliding table: 355 x 1500 mm -Dimensions total 2275/2010/H1400 mm -Weight: 1058 kg

Metal band saw, band saw machine, band saw, vertical band saw -Manufacturer: Mössner Rekord, vertical band saw type SM/420 with saw band welder -Cutting width: max. 400 mm -Cutting height: max. 230 mm -Motor power: 1.1/1.7 KW -Voltage: 380 volts, 50 Hz, 4.6/3.6 A -Band saw: length 3150 to 3260 mm -Band saw speed: adjustable -Work table: pivotable in 2 axes: -Band saw welder: Ideal BSO -Dimensions: 940/750/H1850 mm -Weight: 548kg

Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, metal band saw machine -Manufacturer: Pehaka, horizontal band saw automatic band saw -Drive: 0.8 kW -Cutting data flat: 320 x 150 mm -Cutting data square: 150 mm -Saw blade speed: continuously adjustable, 20 - 195 m/min -Saw band: approx. 3700 mm -Coolant system -Dimensions: 1800/940/H1310 mm -Weight: 528 kg

Wood band saw, band saw machine, band saw, vertical band saw -Manufacturer: Hema Paul and Gotthilf Heermann, vertical band saw -Type: unfortunately without type designation -Drive: 4 kW -Cutting width: max.785 mm -Cutting height: max.475 mm -Saw band: length 5600 mm -Work table: pivoting -Drive motor with brake -Dimensions: 1600/1020/H2430 mm -Total weight: 794 kg

Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, automatic metal band saw -Manufacturer: DoAll, Horizontal band saw, Automatic band saw type C-916A -Cutting dimensions (flat): approx. 410 x 230 mm -Cutting data round: approx. 230 mm -Cutting data square: approx. 230 mm -Saw blade speed: continuously adjustable, 15 - 120 m/min -Engine power: 3 kW -Saw blade: approx. 4014 mm -Coolant system: present -Dimensions: 2080/1400/H1390 mm -Weight: 670 kg

Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Manufacturer: Kaltenbach, Double miter saw type DKL 500 -Cutting length: 245 to 4180 mm -Saw units: swivels 45° -Saw blade: Ø 490 mm -Accessories: incl. additional saw blades, see photos -Overall dimensions: 5130/1100/H1410 mm -Total weight: 1154 kg

Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, circular table saw, circular saw -Manufacturer: White Paisley, table saw on solid base -Motor power: 6.3 kW / 1430 rpm -Saw blade: Ø 550 mm -Max. Cutting height 180 mm -Cutting width: up to 455 mm -Table height: 850 to 1000 mm -Chip extraction: Extraction system can be supplied at an additional cost -Dimensions 1240/1100/H1500 mm -Weight: 762 kg

Wood band saw, band saw machine, band saw, vertical band saw -Manufacturer: Hema Paul and Gotthilf Heermann, vertical band saw -Type: unfortunately without type designation -Drive: 4 kW -Cutting width: max.770 mm -Cutting height: max.400 mm -Saw band: length 5330 mm -Work table: pivoting -Dimensions: 1470/935/H2390 mm -Total weight: 743 kg

Metal band saw, band saw machine, band saw, vertical band saw -Manufacturer: Pehaka, Vertical band saw USF-5R -Drive: 3 kW -without brakes, removed -Cutting width: max. 500 mm -Cutting height: max. 400 mm -Saw blade: Length 3850 to 4050 mm -Saw blade speed: stepless -Work table: swiveling -Accessories: including additional band saw blades (see photos) -Dimensions: 1300/910/H2140 mm -Weight: 625 kg

Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, panel saw -Manufacturer: Altendorf, sliding table saw type TKR 45 -Main motor: Bauknecht 5.5 kW with brake -Scorer motor: Emod 0.75 kW -Speed: 3000/4000/5000 rpm -Saw blade: Ø 300 mm / max. Ø 350 mm -Max. Cutting height: 90° 95 mm / 45° 70 mm -Miter cut: up to 45° -Cutting width: 2250 mm -Table length: 1400 mm -Dimension total 3480/1530/H1370mm -Weight: 1104 kg