rip saw used for sale

Key data: 500 mm

Aluminium circular saw, semi-automatic aluminium underfloor circular saw for mitre cuts 0 to 67.5 degrees to the left and right - Machine with solid cast construction - Large solid rotary table - 7 main angles with fixed stops - Mitre 0 to 67.5 degrees left and right - 2 pneumatic vertical and horizontal vises - Two-hand safety control - Infinitely adjustable saw blade feed Great condition, machine hardly used. Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is being carried out Saw blade: 500 mm Colour: blue/yellow Total power requirement: 380 V Weight: 550 kg Dimensions: 1140 x 1150 x 1740 mm Speed min./max.: 2860 Cutting area at 90 degrees square 160 x 160 mm Cutting area at 90 degrees rectangular 260 x 100 mm Cutting area at 45 degrees square 145 x 145 mm Cutting area at 45 degrees rectangular 185 x 100 mm Angle a ...

CANALI log band saw system model BBS. V - PACIFIC - 1800 Type 555 Refurbished 2024 CANALI pneumatic clamping carriage with 4 clamping claws, speed 6-120 m/min., 100 kW 3 log turners, 4 ejectors, cutting thickness adjustment 150 mm/sec. Log feeding station with insert, hole pull with model cross conveyor complete sharpening room equipment Iseli stellitizing machine SAA, Iseli leveling machine EBW-E, rolling machine with straightening bench, Band saw sharpening machine and leveling machine Electrical cabinets and control panels, control cabs Refurbished 2024

A fully automatic metal band saw Kasto with roller conveyors is available. Mitre min./max.: -45°/60°, max. cutting diameter: 260mm, max. cutting dimensions X/Y: 300mm/260mm, saw band dimensions X/Y/Z: approx. 2910mm/27mm/0.9mm, machine dimensions X/Y/Z: approx. 1500mm/1850mm/1500mm, weight: approx. 900kg, control: Kasto BasicControl. Certain parts of the machine are defective. An on-site inspection is possible.

Hans Schreiner metal bandsaw with pivoting cutter arm, for the professional, with soft hydraulic for the correct pressure, electrical coolant system for all kind of metals, steels and Nirosta, quick clamping vice automatic cut stop, the semi-automatic control with preprogrammed cycle (user starts - clamping workpiece - cutting - saw arm resetting - unclamp workpiece) is optional at the MBS370SA for metal worker and workshops with small - and mass serial products. Strengthened frame for more stability. CE conform Technical Data: Motor: 400V,50Hz Reduce gear rate: 25:1 Wheel diameter: 380mm Blade size: 3160x27x0.9mm Blade speed: 34 or 68 m/min Cutting angle: 45°L, 30°L, 15°L, 0°, 15°R, 30°R, 45°R, 60°R Coolant pump: 400V, 50Hz, 3~, 25W Packing size: 1770x765x1120mm Weight: 365 kg

Qty. 1 Second-hand V-cut saw line with PE film packaging line with PE extrusion Mfc.: Emmegi, Moretto Type: Saw: V-Cut - EST D46 Built: 2004 Min./Max profile length: 1500 – 7000 mm Consisting of: Saw line PE extruder Film packaging line with feeding device and stacker Connected power: 25 kW, 400 V, 50 Hz Control voltage: 24 V

Sliding table saw Felder K700, built in 2006, good condition, 880 mm table width, 100 mm cutting height, 1300 mm format table length, approx. 300 kgPrices subject to change, errors, printing and typesetting errors excepted

Demonstration machineYear of manufacture 2021Hans Schreiner metal band saw with swivel arm, for professionals, with soft hydraulics for the right cutting pressure, electric coolant system, for all metals, steels and stainless steel. Quick-release vise. Choice of automatic operation and manual operation can be easily switched. Automatic belt shutdown, price with base, reinforced frame for more stability, CE compliantTechnical data:Motor output power up to 1.9kW S6 (1.5kW S1)

Circular saw Felder K7, very good condition, 3000 mm table length, 600 kgPrices subject to change, errors, printing and typesetting errors excepted

The new Pilous DB700Pro double edger is aimed at professional users who demand maximum efficiency and capacity. This model offers more powerful units, optimized stability, and expanded adjustment options to process even the most demanding materials with maximum accuracy. With its powerful drives, high cutting performance, and durable components, the CTR-DB700PRO is the perfect solution for businesses that value speed, precision, and cost-effectiveness. ... Advantages and Features: - Reinforced drive technology for maximum performance - Extremely stable machine base - Fast, precise adjustments for professional applications - Significantly increased wood throughput capacity - Very high cutting height of 105 mm - High level of safety thanks to 4 rows of anti-kickback technology and multiple emergency stop switches - Perfect material feed thanks to 4 driven steel feed rollers at the bottom a ...

Hydraulic log band saw Forestor CTR800H incl. the following accessories:3m extension section, chain log turner, log lifter hydr. rotatable, stem lifter hydr. with drive, saw blade tensioning device, 11 kW motor, pre-cutting device, ammeter, saw blade guide electrically adjustable, LG automatic, irrigation pump with automatic switch-onPrices subject to change, errors, printing and typesetting errors excepted

Log band saw Pilous CTR750EV, very good condition, 5.5 kW, S6 7.5 kW, 3.6 m cutting length, 460 kgPrices subject to change, errors, printing and typesetting errors excepted

Holzprofi Maker PS315F-2000 sliding table saw with smooth sliding carriage and large outrigger table, pivoting circular saw blade, and finely adjustable crosscut stop. Space-saving thanks to the easily removable outrigger table. Scoring tool, miter stop, and eccentric clamp included as standard. New: Preparation for grooving cutter. Technical data: Main engine power S1 3,8 kW Voltage 400 V Saw blade tilting 45° Sliding table 2000 x 267mm Cutting length 2300 mm Saw blade size 315 mm Bo. 30 mm Scoring blade 100 mm Bo. 20 mm Cutting depth 90°/45° 100 mm / 80 mm Speed saw blade 4500 RPM Speed scoring saw blade 8500 RPM Extraction connection 100 mm Groove cutter thickness (optional) 6-22.5 mm Groove cutter bore (optional) 30 mm Weight 284 kg Optional equipment: with 2600mm format table, Driving device FE-MW-1

Double edger TRAK-MET PTF2-4, built in 2022, like new, feed rate 0.40 m/min, incl. laser, 15 kW, 2 knives, 1150 kgPrices subject to change, errors, printing and typesetting errors excepted

Holzprofi panel saw KS400 incl. scoring unit, smooth running format sliding table with large outrigger table, saw blade tiltable, fine adjustable parallel rip fence incl. mitre fence and eccentric clamps. Very stable guidance of the format table for precise working even with heavy work pieces. With own motor for the scoring unit for an easy deactivation. Technical data: Main motor outputS1 5,5 kW Scoring motor output S1 0,75 kW Voltage 400 V Saw blade tilting 0-45° Format table size 3200 x 375 mm Blade dimensions 400 mm Cutting depth 130 mm Scoring saw blade 120/20 mm Speed saw blade 3000/4000/5000 RPM Speed scoring saw blade 8000 RPM Cutting width 1250 mm Weight 1000 kg

Log band saw Pilous CTR750EV, very good condition, rails new, 5.5 kW, 4100 mm belt length, 460 kgPrices subject to change, errors, printing and typesetting errors excepted

Woodmizer EG100 double edger, built in 2019, standard equipment, 8 kW, 2 saw blades, 512 kgPrices subject to change, errors, printing and typesetting errors excepted

Woodmizer log band saw, built in 2022, incl. pre-cutter, electric height adjustment, electr. Feed, 900 mm max. log diameter, 11 kW, 10 m cutting length, 1000 kgPrices subject to change, errors, printing and typesetting errors excepted

Sliding table saw Laguna Fusion, good condition, 1450 watts, 1118 mm table length, 792 mm table width, 79 mm cutting height, 3800 rpm, 110 kgPrices subject to change, errors, printing and typesetting errors excepted

Double edger Woodmizer EG300, built in 2019, good conditionTechnical data:Passage width 550 mmCutting height 60 mmMinimum cutting width 60 mmMaximum cutting width 410 mmWidth adjustment ElectricMinimum board length 700 mmSaw blade diameter 2 x 350mmMotor 15 kWFeed speed Infinitely variable 0 to 25 m/minMachine length with tables 4900 mmMachine width 1630 mmMachine height 1250 mmWorking height 900 mmWeight 988kgPrices subject to change, errors,

Exhibition / demonstration machineThe new Pilous DB700Automatic double edger is characterized by the best functionality and long service life due to its solid construction. 3 driven steel feed rollers at the bottom, 2 rotating pressure rollers with rubber coating at the topWith control panel for automatic saw blade adjustmentNumber of saw blades can be expanded as required2 return rollers on the machine for easy operations4 rows of anti-kickback technologySeveral emergency stop switchesEasily positioned scale. Saw shaft made of extra hardened premium

Log band saw Hauslhof CTR800Hydraulics, demonstration machine, Bloch diameter up to 830 mm, total length 5800 mm, width 2300 mm, with hydraulic system for clamping, clamping, turning and lifting the Bloch Motor output power total at 100% ED 10 KwIncluding:CTR800H-Ver3CTR800H-KSDCTR800H-STHCTR800H-STH-VCTR-SSPCTR- 11CTR-VORCTR-AMPCTR-EGLCTR-LG AutomatCTR-Pump-EA

Demonstration machineThe new, state-of-the-art, solid log band saw from Holzprofi is for a log diameter of up to 75 cm and offers many possibilities to cut your wood and logs correctly. Highest cutting accuracy thanks to cutting thickness calculator, galvanized lower part, powder-coated upper partincl. Pre-cutting device! For all types of wood, logs or waste wood. can be expanded indefinitely with extension sections. CE approved. The original!, not a replica Technical data:max. stem diameter

Demonstration machineSolid log band saw for a log diameter of up to 71 cm with extension sections that can be extended indefinitely. Automatic feed with infinitely variable speed. Electric height adjustment can be controlled from the operator's desk. 3.8 inch touch LCD display for height adjustment. Saw unit suspended on both sides for more stability and better precision. CE approved. Technical data:max. trunk diameter 71 cmmax. Board width 67 cmEngine output S1 5.5kW section length basic version 2.1mCutting length

Exhibition / demonstration machineThe new state-of-the-art, solid log band saw from Holzprofi is for a log diameter of up to 75 cm and offers many possibilities to cut your wood and logs correctly. Highest cutting accuracy thanks to cutting thickness calculator, galvanized lower part, powder-coated upper part For all types of wood, logs or waste wood. can be expanded indefinitely with extension sections. CE approved. The original!, not a replica Technical data:max. trunk diameter 750 mmmax.

Demonstration machineExtra strong, solid, durable log band saw for a log diameter of up to 1000 mm. Soft starter is included, expandable with extension sections. Automatic feed with infinitely variable speed. Electric height adjustment can be controlled from the operator's desk. With telescopic lever log turner, log lifter, log jack with drive for horizontal log feed. Hydraulic angle stops.2 pieces of stem clamping tool. hydraulic saw blade tension. Electrically adjustable saw blade guide. CE approved.

Demonstration machineThe professional log band saw for a log diameter of up to 100 cm from Forestor Pilous is the further development of decades of sawmill tradition, specially designed for the sawing professional. With telescopic lever log turner, log lifter, log jack with drive for horizontal log feed. 5 hydraulic angle stops.2 pieces of stem clamping tool. The saw is standard for blocks up to 7.6 m and can be extended as desired. Automatic feed with infinitely variable speed. Electrical

Log band saw CTR710M, built in 2013, 12 m cutting length, incl. LG 100 and scoring machine, 6 kW, 550 kgPrices subject to change, errors, printing and typesetting errors excepted

Paul Double Edger KM2, good condition, 9.6 kW, 590 mm cutting length, 80 mm cutting heightPrices subject to change, errors, printing and typesetting errors excepted

Circular saw Elektra Beckum PKU250, good condition, year 2004, standard equipment, 2.7 kW S6, 83 mm cutting height, 1800 mm format table length, 800 mm table length, 800 mm table width, approx. 75 kgPrices subject to change, errors, printing and typesetting errors excepted

Double edger Woodmizer EG250, as good as new, max. 80 operating hours, 15 KW, saw blades, infinitely variable feedPrice subject to change, errors, printing and typesetting errors excepted

Band saw Hammer 4400, very good condition, 1.5 kW, approx. 110 kgPrices subject to change, errors, printing and typesetting errors excepted

Band saw Felder FB510, year 2019, very good condition, standard equipmentPrices subject to change, errors, printing and typesetting errors excepted

Band saw Metabo BS260 Swift, year 2006, very good condition, 260 watts, 230 V, 1712 mm belt length, 40 kgPrices subject to change, errors, printing and typesetting errors excepted

Log band saw Pilous CTR750E, built in 2024, very good condition, electric feed infinitely variable, 5.5 kWPrice subject to change, errors, printing and typesetting errors excepted

Double edger EG100, built in 2022, very good condition, max. board thickness 50 mm, max. trimming width 300 mm, 7.5 kW, 2 knivesPrices subject to change, errors, printing and typesetting errors excepted

Double edging Pilous DB700M, built in 2023, like new, incl. saw blades, 11 kW, approx. 700 kgPrices subject to change, errors, printing and typesetting errors excepted

Pilous CTR520 log band saw, good condition, cutting length 5.8 m, max. 550 mm trunk diameter, 4 kW S1, 3110 mm cutting length, 310 kgPrices subject to change, errors, printing and typesetting errors excepted

Solid band mill for materials up to the diameter of 130 cm. Soft starter is included, with extending sections expandable. Automtic feeder with variable speed. Electrically height adjustment adjustable from control panel. With hydraulic log taber, log turner and clamping tool. CE Technical details: main engine power 22 kW S1 cutting length 6,7 m max. trunk diameter 130 cm weight 2800 kg

The new band mill by Hauslhof is suitable for diameters up to 40 cm and has a good cutting accuracy. It is unlimited expandable with extension sections and can be set up and pulled down easily. CE certified Technical data: max. log diameter 650 mm max. board width 475 mm Engine power S6 6,5 kW (5,5kW S1) 400V Cutting length basic version 2950 mm Saw band length 3658 mm Saw band width bis 35 mm Belt speed 20 m/sec Cuttinglength extension section optional 1,95 m Weight 335kg Optional accessories: - Extension section extends the cutting length each 1,95 mm

The CTR-DB400 sets new standards in precision, efficiency, and ease of use. This compact double edger was specifically developed for businesses that demand the highest cutting quality while minimizing operating costs. With its powerful drive, robust construction, and precise adjustment of the saw units, the CTR-DB400 delivers consistently clean, parallel cuts – ideal for the cost-effective processing of planks, squared timber, and boards. Thanks to its intuitive operation and low-maintenance components, the CTR-DB400 is the perfect solution for small and medium-sized production lines looking to reliably increase their output. Designed, built, and quality-tested in Europe! Made in EU Advantages and Features: - Fixed saw blade, adjustable in 50mm increments for maximum space utilization - Dust extraction directly at the saw blade for optimal dust removal - Carpet with 2 pressure rollers  ...

Mobile sawmill Logosol B1001, year 2020, very good condition, 23 hp engine, hydr. Trunk compensation, XL trunk mount, trailer kitPrices subject to change, errors, printing and typesetting errors excepted

Pendular saw BOTTENE - with rollers

saw blade diameter: 450 mm capacity 90 degrees: round: 130 mm capacity 45 degrees: round: 100 mm capacity 90 degrees: flat: 210 x 170 mm capacity 45 degrees: square: 145 x 170 mm turning speeds: 2900 U/min total power requirement: 2,3 kW weight of the machine ca.: 600 Kg dimensions: 4,0 x 1,5 x 1,5 m Underfloor aluminum circular saw - Hydropneumatic semi-automatic machine - Pneumatic workpiece clamping device - Roller conveyor with material stop, length 3m - Feed roller conveyor, length 3m Machine color is blue The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Panel saw SCM mod. SIGMA 65 - CE rules - Cutting dimensions: 4500X3200 mm - Main blade projection: 65mm - N. 6 clamps - Saw carriage speed: 12m/min - Main blade diameter: 300mm - shaft diameter 80mm - Scorer blade diameter: 160mm - shaft diameter 55mm - Main blade motor: 5,5kW - Overall dimensions: 7000x5000x4350 - S/N AE/22614 - Year 2001

This SELCO WNTR 710 panel saw was manufactured in 2011. Designed for precision and efficiency in panel cutting, it offers robust performance for woodworking professionals. Consider the opportunity to buy this SELCO WNTR 710 panel saw. Contact us for more information.

Double sided cutting saw COMEC mod. TD1200 - CE rules - N. 2 motors 2 hp - N. 2 blades diam. 350 mm - Min / max working length 220/1200 mm - Cutting inclinations: horizontal +/- 35°; vertical +/- 35° - Volt. 380/50 - S/N 961228 - Year 1996

This 3-axis SELCO WN750 panel saw was manufactured in 2009. It is designed for efficient and precise cutting of panels. Consider the opportunity to buy this SELCO WN750 panel saw. Contact us for more information.

This sawing machine was manufactured in 2000 by KALTENBACH. The KBS 851 DGNC features a miter tilting capability of -60° left and -50° right, accommodating material dimensions at 90° up to 850 x 500 mm. It supports various saw blade types including M2, M42, and M51, with a cutting speed range of 20-120 m/min. Includes an integrated chip tray and Proficut control software. Ideal for steel profile cutting in construction and trade. For more information about this sawing machine, please reach out to us.