rip saw used for sale

A MEBA horizontal miter band saw is offered. Cutting diameter: 420mm, cutting capacity X/Y: 420mm/500mm, cutting speed: 15-150m/min, saw blade dimensions X/Y/Z: 5000mm/34mm/1.1mm, material support height: 750mm. Machine dimensions X/Y/Z: approx. 2300mm/1800mm/2000mm, weight: approx. 1200kg. Valve for the saw blade tension renewed in 2025. An on-site inspection is possible.

cutting diameter: 460 mm saw band length: 0/ mm table height: 0/ mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 45 °, 3500 mm, 1350 mm

Basic Cutting length 3500 mm Cast iron sawing unit type Z5 Max. saw blade (not incl.) 500 mm, max. 350 mm with scoring saw blade Scoring unit 120 x 20 mm Cutting height 90°: 175 mm, 45°: 120 mm 3 speeds: 3000/4000/5000 t/min 8D9Kjux2Mt Cutting width between saw blade and Z4 rip fence 1350 mm Z5 Cross Table (1505x760 mm) with Telescopic with Z5 Mitre Stop with 2 Folding Stops Comfort Pack on Cross Table with Extendable Workpiece Roll Frame table with extendable support and degree grid index system with length compensation Motorized height adjustment and inclined position of the saw blade incl. special accessories: Motor 9.2 kW Start/stop in the sliding table

Offer 24455 Specifications: - Saw feed via hand lever - Saw blade diameter 315 mm - Largest opening width vice approx. 160 mm - Cutting range approx. at 90° around 100 mm - Flat up to 135 x 80 mm - Cutting range Li + RE at 45° around 108 mm - Flat up to 100 x 80 mm - Cutting range Li at 60° around 80 mm - Flat up to 70 x 80 mm - Cutting speeds approx. 33 + 66 rpm - Drive 400 V / 1.3 / 1.8 kW - Coolant device - Space requirement approx. W 950 x H 1600 x D 950 mm - Weight approx. 270 kg

A Daiß + Partner CNC automatic band saw with a double-miter twin-column design is offered. Cutting capacity X/Y: 500mm/320mm, saw blade dimensions: 4700mm/34mm/1.1mm, feed length: 2000mm, rapid traverse: approx. 12m/min, blade speed: 15-105m/min, CNC control: PS 210. Equipment: powered chip brush, Power-Box hydraulic cutting pressure adjustment, Micro-Cooler coolant spray system, hydraulic saw blade tensioning and saw blade breakage monitoring. An on-site inspection is possible.

Key data: 45 °, 2800 mm, 1000 mm

Weight approx. 1140 kg Connected load 380V 7.5kW Scoring unit 0.75 kW manually adjustable by pneumatic connection high and lowerable Trimming length 2800 mm Speeds: 600/5000/4000/3000 rpm via V-belts Electric swivel with digital display Electric height adjustment with digital display Cutting width 1000 mm 23S9Fmzq rear support table 950 x 400 mm wide Angle stop 2500 mm with extension 2840 mm with 2 stops Suction port 120mm + 80 mm for PSV Parallelogram protection device with narrow and wide hood Edging stop

Metal Band Saw manufactured in 1993. This Friggi 2MF/AUT 800 x 800 2C features a cutting capacity of 800 x 800 mm and a round diameter of 800 mm. It is equipped with a powerful 7.4 kW saw blade motor and a hydraulic pump with a delivery rate of 58 L/min. If you are looking to get high-quality cutting capabilities, consider the Friggi 2MF/AUT 800 x 800 2C machine we have for sale. Contact us for further details.

Key data: 45 °, 2150 mm, 1100 mm

Connected load 380V 6.1A 3.8kW Saw blade diameter max. 315 mm Weight approx. 330 kg Length of trimming carriage 2150 mm Speed 4000 rpm Suction nozzle 100 mm Cutting width 1100 mm Angle stop Rip fence

Max. saw blade diameter: 500 mm Infinitely adjustable hydropneumatic saw blade feed Pneumatic material tensioners Weight: approx. 450 kg

A Strebig vertical panel saw is available. Horizontal/vertical cutting length: 4200mm/2200mm, max. cutting depth: 80mm, saw blade diameter: 300mm, saw blade bore: 30mm, speed: 4750rpm, machine dimensions X/Y/Z: approx. 5200mm/1200mm/2700mm, weight: approx. 800kg. An on-site inspection is possible.

Code: 0461 Brand: ALTENDORF Model: F 45 III - CE Standard CNC-controlled 3-axis panel saw with tilting blade for furniture, custom-made furnishings, panels, doors, wooden window frames, plastics, composite materials and various - CE Standard Technical data: Precise sliding double roller carriage Aluminium carriage length 3200 mm Max blade diameter 450 mm - (without scoring unit mm 550 ) Max cutting height 150 mm - (without scoring unit height mm 200) Cutting height at 45° 105 mm - (without scoring unit height mm 141) Scoring unit blade diameter 120 mm 3 controlled axis (lifting/blade tilting/parallel guide) Electric motor adjustment 2-axis scoring unit Control panel at operator height with colour LCD screen Anodised aluminium table extension 840 mm Parallelogram blade guard Register for oblique square cuts, manual adjustment, with length compensation, end cutting up  ...

Max. saw blade diameter: 400 mm Pneumatic material tensioner Manual feed

Oscillation: ja ja / nein : ja ja/nein : ja ja/nein tiltable up to: 45/90 Grad Motor output: 3 kW Table dimensions: 750x350 mm sanding width: 150 mm Weight: 200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cross-cut line Opticut 150 -4 4 ejections built in 2004

Log band saw Canali Braun 1600 round timber feed wagon saw roller conveyor year of construction.1994 new control

Code: N0506 Brand: FELDER - AUSTRIA Model: K 700 S – CE Standard Precision panel saw with tilting blade and scoring unit - CE Standard Technical data: Tilting guide system Easy-Glide” Power-Drive” for automatic adjustment of blade height and tilt Carriage length 3200 mm Blade inclination 90/45° Cutting width 1250 mm Max blade diameter315 mm Bore 30 Rpm 4800 Max cutting height at 90°104 mm Max cutting height at 45° 72,7 mm Adjustable scoring unit - blade diameter 120 mm – Bore 20 rpm 8600 Main blade motor 7,5 Hp Tilting guide on fence 0,45° Support roller on fence Dust extraction connection diameter 120 mm Upper blade dust extraction diameter 50 mm Overall dimensions of assembled machine mm 3400 x 3400 x 1050 h Weight kg 740

Complete plant Bogli 1600 round timber feed saw wagon roller conveyor shearer

Trennsäge - Splitting Saw Metris MT 817 Year 2003 - Serial-No. 020520P Complete clean and Check Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Code: 0473 Brand: SCHNEIDER - GERMANY Model: SLK 300 - CE Standard Universal circular saw for cutting large-sized beams, wooden roofs, wooden walls, laminated beams and various applications - CE Standard Automatic workpiece feed with speed variator Blade diameter mm 800 Blade inclination 90 - 30 degrees with display Manual table rotation from 0 to 180° Cutting height at 90 degrees mm 300 Cutting height at 30 degrees mm 150 Cutting width mm 900 Motor power Hp 15 (Kw 11) Automatic raising of the blade with bimanual control Visualizing laser cutting light N° 2 pneumatic cylinders for clamping pieces with wheels Machine cover with manual opening Protection hood for longitudinal cuts Table size 1560 x 1560 mm Table height mm 940 Infeed roller conveyor mm 6000 x 650 Outfeed roller conveyor mm 6000 x 650 N° 2 suction inlets mm 150 Compressed air 7 Atm Overall d ...

Horizontale Trennsäge / Horizontal Band Saw Jllig TS 100 V Baujahr / Year 1973 - Serial-No. 959 Arbeitsbreite / Working width max. 590mm Ersatz Sägeblatt / Spare Saw band Stufenlose Höhenverstellung des Sägebandes / stepless height adjustment of saw band Stufenlos regelbarer Antrieb / stepless adjustment drive Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Semi-automatic band sawing machine Saw blade size: 2910 x 27 x 0.9 mm Cutting speeds 20 - 120 m/min Cutting capacity 0° round Ø258 mm Cutting capacity 0° square 250x250 mm Cutting capacity 0° rectangular 320x100 mm Cutting capacity 45° round 210Ø Cutting capacity: 45° square 195x195 mm Cutting capacity: 45° rectangular, 210x100 mm Cutting capacity 60° round 135Ø Cutting capacity 60° square 110x110 mm Cutting capacity 60° rectangular 135 x 100 mm Cutting capacity -45° round 185Ø Cutting capacity -45° square 170x170 mm Cutting capacity -45° rectangular 195x100 mm Weight 390 kg If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

This Behringer HBP 410-723 G Metal Band Saw was manufactured in 2014. It features an automatic feed and discharge system, with a working area capacity up to 700 mm x 400 mm. Operating for approximately 5,900 hours, it supports a cutting speed of 20 – 140 m/min and is powered by a 4.0 kW saw drive. Consider the opportunity to buy this Behringer HBP 410-723 G Metal Band Saw. Contact us for more information about this machine.

cutting length: 3050mm; workpeace clamping: Handrad; suction connection: yes;

Used, in very good fully functional condition from company closure. Esterer gang saw with many spare parts and at least 40 new and used saw blades. The gate is in good, ready-to-use condition with minimal bearing clearance of 2-3mm incl.: Braun WE158 quick-release carriage, splitting wedge, timber transfer station Heavy-duty roller trestles and various accessories (can be viewed on site) Frame width: 710 mm Passage height: 710 mm Stroke: 500 mm

Key data: 5600 mm, 40 mm

Holzma panel saw with lift table loading Type: HPL 11/X/56/27/L Year of Make: 2001 Plate format max. 5600 x 2700 mm, min. 1525 x 1220 mm Plate thickness max. 40 mm, min. 3.2 mm Package height max. 110 mm Precast size min. 100 x 100 mm Narrow strips up to 30 mm wide can be cut. With lift table loading Stacking height in the inlet and outlet max. 480 mm Stacking offset max. 20 mm Main saw motor 18 kW Scoring saw motor 2.2 kW Collet opening 130 mm Saw blade diameter 450 mm Saw blade protrusion 125 mm Cutting length 5600 mm Cutting width (program slide travel) 5600 mm Lift table 5600 x 2700 mm, payload 10 to. with driven roller conveyor and frequency converter Stacking height lift table when installed at floor level max. 580 mm, when installed in a pit max. 780 mm 9 collets, the first 3 of which are double-fingered, all others Single pitch 75/275/475/950/1750/2550/ ...

Multi-rip saw Raimann Type: KM 310 Year of Make: 1997 CE max. cutting width 310 mm Cutting height 10 – 90 mm adjustable by handwheel max. cutting height without pressure screen 90 mm, with pressure screen 75 mm Passage width to the right of the saw blade 150 mm max. passage width 650 mm Saw motor 30 kW Feed frequency-controlled 0.75 kW Chain width 340 Saw shaft diameter 65 mm max. saw blade diameter 300 mm Saw blade bore without socket 80 mm, with socket 80 mm Saw shaft speed 4200 rpm. Feed speed infinitely variable 5 – 35 m/min. Diameter of the extraction connection 200 mm Air velocity 30 m/s Air volume 3400 m³/h Transport chain with spikes Machine in good, ready-to-use condition incl. roller conveyor with operating instructions incl. EC manufacturer's declaration Machine in good, ready-to-use condition Net weight approx. 1900 kg

range L-W-H: 400x300x200 mm saw diameter: 420 mm weight of the machine ca.: 3500 kg Producer: KASTO Type: HBA 420U Year of manufacture: 1985 Dimensions (width x height x depth): approx. 400x200x300 cm At7Zcq Fully automatic NC horizontal bandsaw 1 chip conveyor, 1 external chip conveyor, 1 person. driven roller conveyor approx. 450 cm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offered for sale is a fully automatic KASTO vertical bandsaw. Round cutting capacity: 10mm-260mm, max. square cutting capacity X/Y: 260mm/260mm, min./max. cut-off length: 5mm/600mm, feed length: 600mm, min. remnant length: 10mm, max. cutting speed: 125m/min, saw blade dimensions X/Y/Z: 4115mm/41mm/1.3mm, control: KASTO minipos 807, weight: approx. 2200kg. Inspection by appointment is possible.

Precision design for the professional with high cutting performance and many equipment options Description Heavy-duty design with high dead weight for maximum smoothness Particularly smooth and precise running thanks to torsion-resistant machine housing Cast flywheels with rubber coating and cleaning brush 3-roller precision saw blade guide at the top and bottom as standard Large grey cast iron saw table, swivelling from 0° to +15° with ground and polished surface Large cast iron rip fence with round rod guide, easy to move Saw Blade Tension Indicator Precise cutting height adjustment via rack with millimeter scale Self-braking motor Available on request Version with cutting height up to 1650 mm Other special designs Table, motor and switch must be assembled on site Technical data Dimensions and weights Length (product) approx. 1050mm Width/depth (p ...

Description - Particularly smooth and precise running thanks to a torsion-free machine housing and a solid substructure made of sheet steel - Cast iron saw table with precisely ground and polished surface - Convenient laser setup for cutting line marking - Saw blade quick clamping via eccentric lever on the rear of the machine - Two speeds as standard - Precise 3-roller saw blade guides, top and bottom as standard - Quick cutting height adjustment via rotary knob and rack with millimeter scale - Smooth-running aluminium rip fence with eccentric quick clamp and magnifying glass - Standard angle stop, adjustable by 60° on both sides - Safety switch for automatic shut-off when the door is opened Technical data Dimensions and weights Length (product) approx. 1020mm Width/depth (product) approx. 880mm Height (product) approx. 1982mm Weight (net) approx. 187kg Connection su ...

Portable firewood saw for cutting up strips, branches and other waste wood. Technical data: Length: 950 mm Width: 600 mm Cutting height: approx. 60 mm Motor: 2.2 kW Connection: 16 A / 400 V Condition: Gebraucht Location: Tauberbischofsheim, Germany

SKU BS-250M Return Manual Rake angle adjustment Ehrwinkelkopf Grit angle 1 – 60° Motor power 2.2 kW Cutting area 90° rectangular 259 mm x 110 mm Capacity Round 90° x 45° x 60° 227mm / 150mm / 90mm Square capacity: 90° x 45° x 60°, 220 x 220 mm / 144 x 144 mm / 84 x 84 mm Table height 889 mm Strip guide carbide and ball bearings Belt dimensions (H x W x L) 27 x 0.9 x 2470 mm Blade speed 20 - 85 rpm Lowering Control Hydraulic Support Drive Gear Operating voltage 230 V, 50 Hz, 1-phase Delivery weight: 216 kg Shipping dimensions (L x W x H) 1524 x 1118 x 1219 mm

dimensions of saw-blade: 350x32x4 mm vice: 180 mm : 1700/3400 U/min capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180x70 mm capacity 45 degrees: round: 120/110 mm capacity 45 degrees: square: 100/95 mm capacity 45 degrees: flat: 135x60 mm output: 2,2 kw weight: 225 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CUTTING RANGE . MIN 10MM TO 75MM CUTTING LENGTH . 5-900 SINGLE STROKE -9999 REVERSE CUTTING SPEED. 0 - 40 MM SEC. INFINITELY ADJUSTABLE BACKWARDS 135MM/S MATERIAL FEED SPEED . MAX. 350 MM/S Pwrxaerqe RESILIENCE. MAIN CLAMP 10500N

The EMMEGI wood and aluminium cross-cut saw is designed for cutting to length and mitre cuts: swivelling Technical data: Motor: 0.55 kW / 220 V Cutting height: approx. 50 mm Cutting depth: approx. 80 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Sturdy Pehaka band saw for sawing timber and other materials. Technical data: Roller diameter: 800 mm Motor: 3 kW Clearance height: max. approx. 350 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

MEP Shark 260 Price 1650 Adjustable gravity lowering Round tube cutting capacity mm. 210mm. at 90° Cutting capacity with square cross-section mm. 200mm. at 90° Cutting capacity other cuts 270x200 mm. Head motor power kw.1.8 Engine revolutions 2 speeds RPM 36 - 72 Strip development diameter 2750 x 25.4 s. 09mm. User Manuals CE Declaration of Conformity Machine weight kg. 350

The Graule ZS 85 N mitre saw is designed for cutting to length and making mitre cuts: it can be swivelled and tilted. Cutting height 85 mm Cutting length 380 mm Technical data: Motor: 1.5 kW Connection: 380 V Condition: Gebraucht Location: Tauberbischofsheim, Germany

Large A. Recker ATS-type mobile timber circular saw for various sawing tasks in workshops or on construction sites. Condition: Gebraucht Location: Tauberbischofsheim, Germany

Elektra-Beckum BA S 600 light-duty band saw for cutting timber and other materials. Technical data: Roller diameter: 600 mm Weight: 160 kg Cutting height: max. approx. 300 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Technical Parameters Maximum cutting performance Round: 650mm Square 650×800mm Saw blade Speed 20~80 m/min Size 54X1.6 Guidances Tungsten carbide and bearing blade guides Cleaning Wire Brush & Flood Coolant Voltage Hydraulic Power 7.5 kW Hydraulic 2.2 kW Coolant 0.12 kW

Panel sizing saw with lift table loading HOLZMA type OPTIMAT HPL 380/43/22/L Specifications: • Saw blade protrusion (mm): 95 • Saw carriage feed forward (m/min.): 5 - 130 • Saw carriage feed backwards constant (m/min.): 130 • Program slider speed forward (m/min.): 80 • Reverse program slide speed (m/min.): 80 • In EU countries, a maximum forward speed of 25 m/min is prescribed. • Angular pressure device min. pressure width (mm): 0 • Angular pressure device max. pressure width: complete cutting length • Main saw motor (kW): 13.5 • Scoring saw motor (kW): 2.2 • Collet opening max. (mm): 100 • Working height (mm): 920 • Cutting length (mm): 4300 • Collets: 7 pieces, of which the first 3 pieces are two-fingered, all others are single-fingered • Pitch: 75/275/475/1050/1850/2650/3450 mm measured from angle ruler to center collet Lift table: ...

For sale is this hydraulic under-sink miter saw with two conveyor belts. Saw table dimensions L 800 mm x W 900 mm x H 800 mm. Conveyor belt behind the saw 1500 x 700 mm, conveyor belt in front of the saw 2500 x 700 mm, distance from the beginning of the belt to the saw 3300 mm, saw blade diameter 500 mm, max. cutting height 120mm, motor approx. 5.5 kW. The saw was completely repaired.

BEKA-MAK BMSY 440 DGH metal band saw was built in 2020 in Turkey by BEKA-MAK MAKİNA SAN. VE TİC. A.Ş. The machine is designed for the precise cutting of workpieces with circular, rectangular and square cross-sections at angles in the range from +60° to -60°. High machining accuracy, combined with a number of well-proven technical solutions, makes the machine ideal for use in professional industrial plants and workshops. The BEKA-MAK BMSY 440 DGH is characterised by a stable design based on a robust, rotating arm. Cutting is performed using a 5200 mm saw blade, whose precise guidance is ensured by guides with rollers and carbide inserts. The movable coolant tank cooperates with an electric pump, supplying coolant to both band guide units. A hydraulic vice ensures the workpiece is held securely in place during cutting. The BMSY 440 DGH semi-automatic band saw is offered with a comp ...

Key data: 550 mm

Five Axis CNC Controlled Dual Head Double Miter Circular Sawing Machine with Loading and Unloading Device Maximum section length with two saw heads at the same time - 6,000 mm Maximum saw blade diameter Ø 550 mm Infinitely programmable mitre angle adjustment - 15° / 90° / + 45° Saw blade drive power 2 x 2.64 kW Dimensions approx. 11.3 m x 2 m x H 2 m (with closed safety doors)

This RAPID DGL 200-E sawing machine was manufactured in 2017. It features a manual swivel range from 45° to 90°, a 500mm saw blade, and pneumatic saw feed. It includes both horizontal and vertical clamping cylinders, enhancing its versatility. Dimensions for the 3700mm cutting length are 5250 x 1420 x 1900 mm, and it weighs 1260kg. A robust choice for diverse cutting needs. Contact us for further details regarding this sawing machine.

Circular Metal Saw manufactured in 2017. This STEIN BAK10-D features an electrical height adjustment system and individually adjustable caterpillars and saws. It has a maximum saw blade diameter of 400 mm and a regulated saw blade nominal speed ranging from 500 to 4200 rpm. If you are looking to get high-quality cutting capabilities, consider the STEIN BAK10-D machine we have for sale. Contact us for further details.

Cutting speeds: 30/60/130/260m/min, mains connection: 380V/50Hz three-phase, rated supply current: approx. 7.5A, upstream fuse: 20A slow-blow. An on-site inspection is possible.

Key data: 4300 mm, 2200 mm

EXHIBITION MACHINE Cutting height 2200 x cutting length 4300 mm, cutting depth 80 mm Motor power: 5.5 kW Automatic saw feed for vertical and horizontal cut, infinitely variable from 6-25 m/min. incl. the following accessories: - Suction CE - Pneumatic aluminium sliding shelf - Medium workpiece support - Longitudinal fence with digital dimension display - Stripe stop - Digital dimension display for horizontal cutting on the control panel - 3 adjustable anchorage points in the saw bar - SuperCut scoring device incl. 2 WPL knives - Narrow parts line (2 pieces)

Key data: 45 °, 3200 mm, 1500 mm

Connected load 380V Main motor 7.5kW Scoring motor 0.75kW Length of trimming carriage 3200 mm Cutting width 1500 mm Table extension 840 x 320 mm Parallelogram protection device with wide and narrow hood Scoring unit manual adjustment Electric height adjustment Electric swivel with Siko indicator Extraction connection 1x100mm 1x120mm