rimming used for sale

There are 22 machines available, 4x Singer 770 D41PE, 2x Singer 990 E3, 1x Singer 993 E3 FA320, 1x Singer 460 K73, 1x Union Spezial Klasse 75300 A, 1x Rimoldi 446930, 1x Romoldi 416498, 1x Rimoldi S60, 1x Rimoldi 7142, 1x Rimoldi 7143, 1x Lewis 150-2, 2x Kettma Klasse 100KA, 1x Kettma Klasse 100 KAS and four additional machines.

1 VIRGINO RIMOLDI roll slitting machine type TMF RN160AV. Machine used to obtain tapes of different widths, whether the fabric is wrapped "in line" or on the bias. Cutting system with motorized disc blade and manual feed. The fabric roll is supported by a shaft that enters the cardboard tube where the fabric is rolled on. The shaft is motorized and its rotation is synchronized with that of the disc blade, ensuring a clean and precise cut. Device for sharpening the disc blade. Width of the strips to cut: from 20 to 130 mm. Maximum width of the fabric roll: 1,600 mm. Maximum cutting diameter 230 mm. Diameter of the roll holder bar: 45 mm (for carton tubes of inside diameter 46 mm and outside diameter 50 mm).

KReuzleger Rima RS-10S

Built in 2001 Size max 320 x 250 mm min 260 x 180 mm Pile height 330 mm max min 80 mm Infeed height 890 mm max min 860 mm Speed max 900 Pack. / h

Format max 470 x 320 mm format 152 x 127 mm power max 18,000 c/h Stack height 235 mm Stackhoehe Pre-stacking basket 124 mm ; ready for use

Size max 470 x 320 mm Weight 520 kg (approx.) Speed max 18.000 c/h Equipment o - special: post code identification ; working condition

Specifications of the straightening machine RM2300/8/9 Engine power in KW: 22KW Straightening machine width: 2300 mm Max directional width 2200 mm Straightening rollers Number: 9 pieces Straightening roll diameter: 95 mm Support rollers Number: 22 pieces Support rollers below: 12 pieces Support rollers on top: 10 pieces Sheet thickness max: 8 mm

-Basket diameter 410 mm; -Basket height 410 mm; -Drum volume: 25 liters; -Batch max.: 30kg; -Motor power: 1.1 kW; -Speed: 1000 rpm; -Mains voltage: 400 V; 50 Hz; -Control voltage: 230 V; 50 Hz; -Max. back-up fuse: 15 A; -Total approx. 900 x 900 H 1100 mm.

Stacker

Printing area 500x400 mm 220v Pre-owned

Description: tube diameter: 75 mm consisting of three parts:  , 1/3 preparation table: dimensions: 4100 x 700 x 1000 mm 2/3 pipe finishing machine O25 (D=75 mm): dimensions: 6300 x 1000 x 1300 mm 3/3 receiving table: dimensions: 4100 x 600 x 1000 mm  , please also have a look at the video of this machine weight approx.: 4,000 kg, Approx. Onsite Dimension. (l x w x h): 6,300 x 2,000 x 1,300 mm

Tires with rims, tires for lawn tractors, ride-on mowers -Tire size: 23x9.00-15 AS -Dimensions: Ø 720 mm -Weight: 22 kg

Tire with rim -Tire size: 16.00 R20 -Dimension: Ø 1320 mm -Weight: 246 kg

Description: Various manufacturers CONTINENTAL, GOODYEAR, various years of manufacture, e.g. 2020, 2023, with 6-hole rim, probably for Mercedes Benz Sprinter, tyre size 235 65R16C (exemplary), approx. 18 complete sets in total, without swap body Approx. Onsite Dimension. (l x w x h): 6,000 x 2,500 x 1,500 mm, weight approx.: 2,000 kg

Heavy-duty wheels, swivel castors, castors, solid rubber castors Outer diameter: 240 mm Bore: 30 mm Rubber thickness: 30 mm Quantity: 90 Sold as shown All information without guarantee

Tires, tractor tires, tillage, seed drill -Quantity: 2x tires -Tire size: 180/90-16 IMP -Dimension: Ø 700 mm -All-inclusive price: for 2 tires -Weight: 40kg/pcs

Tires, tractor tires, tillage, seed drill -Number: 3x tires from an Amazone seed drill -Wheel size -Hub: Ø 40 mm -Dimension: Ø 750 -Complete price: for 3 tires -Weight: 51 kg/piece

Turntable, slewing ring -Outer diameter: below 650 mm -Inside diameter: above 460 mm -Height: 52 mm -Load capacity: 2500 kg -Number: 2x available -Price: per piece -Weight: 23 kg

Turntable, slewing ring -Outer diameter: above 700 mm below 685 mm -Interior diameter: above 570 mm below 585 mm -Hole circle diameter: above 673 mm below 654 mm -Height: 80 mm -Load capacity: approx. 3500 kg -Weight: 32 kg

1. Rim rims 61854 - 12 pcs. 2. Rim rims 61858 - 40 pcs.

Straightening machine make DREHER type Rima Mod. 1645 CVSerial no. A11 594/88, manufactured in 05/1989Technical specifications:Bhmx2lm3lqmax.working width: 300 mmStrip thickness min./max. : 0.4 - 1.2 mmAdjustable belt speed: 5 - 40 m / min.With- 4 pairs of rollers 40 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Straightening machine make DREHER type RIMA model 1675 BGLOrder -No: A07/395-90 Year 1991Technical specifications:max. belt width 300 mmMinimum belt width 50 mmTape Thickness 0.6 - 2.5mmMaterial strength 400 N/mmBelt speed 5 - 30 m/min.7 straightening rollers diameter 60 mm2 feed rollers diameter 60 mm2 outfeed rollers diameter 60 mmDrive power 5.5 kWDimensions approx. 1200 x 1000 x 1500 mmWith- 3 digital displays- Emergency stop switchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pulverbeschichtungsanlage für Autofelgen Kann 4 Stück 22"-Felgen in 1 Charge pulverbeschichten Komponenten der Anlage: 1,5x1x1,28m Pulverbeschichtungsofen, 18KW elektrisch VFK-2 einseitige manuelle Pulverbeschichtungskabine Förderstrecke und Ladewagen Manuelle Pulverbeschichtungsanlage Lieferung - 8 Wochen EXW Istanbul Fabrik Inklusive Montage und Schulung Wir bieten die besten technischen Lösungen und wettbewerbsfähige Preise Deutschsprachige Kontaktperson in Deutschland verfügbar. Kontaktieren Sie uns für weitere Informationen und Angebote VOGAMAKINA Ltd. infovogamakinacom Powder coating line for car wheels Able to powder coat 4 pcs of 22" rims in 1 batch Line components: 1,5x1x1,28m powder coating oven, 18KW electrical VFK-2 single sided manual powder coating booth Conveyor track and load trolley Manual powder coating equipment ...

Powder coating line for car wheels Able to powder coat 4 pcs of 22" rims in 1 batch Line components: 1,5x1x1,28m powder coating oven, 18KW electrical VFK-2 single sided manual powder coating booth Conveyor track and load trolley Manual powder coating equipment Delivery - 8 weeks EXW Istanbul Factory Assembly and training included

Solid rubber wheel, with rim, 5 pieces PAGUS -? 2x 630 - 220 - 480 outer diameter: Ø 630 mm rim diameter: Ø 480 mm, rim width: 220 mm support width: 190 mm hub diameter: max. 220 mm bolt circle diameter: Ø 275 mm, 8x bore: Ø 27,5 mm 3x 630 - 200 - 480 outer diameter: Ø 630 mm rim diameter: Ø 480 mm, rim width: 200 mm support width: 170 mm hub diameter: max. 164 mm bolt circle diameter: Ø 205 mm, 6x bore: Ø 20.5 mm Material: steel ( rim ), rubber ( tire ) used, tested ! Dimensions ( transport, with pallet ) : 1200 x 800 x 800 mm

solid rubber wheel, with rim, 4 pieces PAGUS 400 x 65 outer diameter: Ø 407 mm width: 68 mm rim: S29-26 necessary shaft diameter: Ø 26 mm, length: 60 mm material: steel ( rim ), rubber ( tire ), plastic ( bearing ) used, tested ! Dimensions: 410 x 410 x 70 mm

Furniture roller, furniture dog plastic rollers, furniture transport trolley, transport trolley, platform trolley, transport trolley wheels, heavy duty truck, table trolley, assembly trolley, complete wheel, tire with rim, -Complete wheel: tire with rim, unused -Tire size: 13x5.00-6 - Rim: with inner bearing Ø 15 mm -Quantity: 45 pieces -Price per piece -Dimensions: Ø 310 x 105 mm -Weight: 2 kg / piece

KOLTECH TUU 1250 CNC above floor wheel lathe was manufactured in Poland in 2007. The wheel lathe is a special-purpose machine designed for the turning process of the running profile of wheelsets used in various types of rail vehicles. The lathe uses high-end components to guarantee efficient and precise machining of both used and new wheelsets for the railway industry. The solidly constructed structure with friction drive allows a wheelset with a maximum weight of 4 tonnes to be fed into and out of the machine from hall level. The TUU1250 machine performs the following operations: – reconditioning of the wheel profile of used wheelsets, – turning of the wheel profiles of new wheelsets, – turning of the clamping ring of the wheelset wheels, – facing of the inner and outer face surfaces of the wheels, – facing of the active surfaces of brake discs, installed on the wheels ...

Continental Contract AC 70 380/70 R 20 TL, on original Iseki rims. Tires almost 100%, condition as good as new, approx. 40 mm stud height. Outer diameter approx. 105 cm, year of production probably 2008 (128 A8), width approx. 37 cm, rims press-in depth inside approx. 125 mm, outside approx. 155 mm, hub approx. 160mm/hole circle approx. 6x205mm Further wheel sets of various sizes for municipal tractors and machines in stock, information and offers on request. No shipping of package deals or lists. Please name and tel. for questions. Please feel free to receive advice by phone in advance. For sightseeing appointment required!

M. No.: 560037 Colours: 6 Equipment / Additional information: Consists: • stacker • printing machine • Cup feeding • stapler Max. cup rim diameter 130 mm Min. cup rim diameter 55 mm production speed each according to cup size, quality and Raw materials with UV drying up to 24,000 cph (without positioning) With positioning 12'000/h - 15'000/h depending on cup, format and flap. El connection value with drying approx. 26 kVA Electrical connection 3 x 400 V, 50 Hz Air connection / consumption 6 bar / approx. 50 m3/h Weight approx. 7,800 kg

M. No.: 24 Colours: 6 Equipment / Additional information: Consists: • stacker • printing machine • Cup feeding • stapler Max. cup rim diameter 130 mm Min. cup rim diameter 55 mm production speed each according to cup size, quality and Raw materials with UV drying up to 24,000 cph

Furniture roller, furniture dog plastic rollers, furniture transport trolley, transport trolley, platform trolley, transport trolley wheels, heavy duty truck, table trolley, assembly trolley, complete wheel, tire with rim, -Manufacturer: Kettler Segers complete bike, unused -Tire: Kettler Duro HFR 3.00-4 -Rim: without bearings, inside O 26 mm -Quantity: 23 pieces -Price per piece -Dimensions: O 253 x 80 mm -Weight: 1 kg / piece

Line for filling delicatessen products in plastic trays, consisting of:, Cup filling system, make Waldner, type 12.3, year 2011, 2 lanes (2 different formats) - but it can only be worked in one lane., Format set 1: round cup diameter 100mm (incl. rim) height 80mm and 60mm, Format set 2: Rectangular cup 185mm long 135mm wide (including rim) 35mm deep, The trays are sealed with film from the roll, Roll magazine approx. 500mm long, 400mm wide, Waldner space requirement: approx.: 2,100 m 2,100 mm, Outfeed belt of the Waldner: approx. 1,800 mm, Dosing of liquid and free-flowing components:, The system has two filling heads, which are filled via a pipeline directly from the cooking kettle., The pipeline can be completely pigged., The pigging line and Maso - Sinus pump, type SPS 3, are included in the scope of delivery., Feeding of the multihead weigher by means of two belts:, Tunnel elevator  ...

1 pc. wheel loader tyres with rim The following information is available on the tyre: ALLIANCE 600/60-30.5, 12 P.R., NYLON, A8, FLOTATION 331 The tire is in good condition. Pick-up preferred, but on request a transport can also be arranged.

2 pieces of tyres with rims good state 85% of profile receive, became from follower taken

1 rimless hydro extractor made KRANTZ, type GLEITSCHWINGER 1500 x 600 inside basket diameter 1.500 mm inside basket height 600 mm

Sander Press Feed Type 260/40 Technical Data: 1. Feed (infinitely adjustable) 60 - 260 mm feed angle 118 degrees 2. Gripping distance per rail 40 mm gripping angle 58 degrees 3. Gripping railprof11 (T-nut pro1? 80 x 25 mm 4. Gripping rail position closed 305/350/395/440 mm 5. Gripping rail ingestion flat guide 6. Gripping rail slurl 2687 mm 7. Gripping rails 1323 mm 8. Gripping bracket width 73 mm 9. Position of the connection shaft basic geraet - outlet rim I 121 x 260mm outlet gable I - spout scope II 121 x 600mm 10. Diameter of the connecting shaft 11. Transport air above the press table 12. Drive by press (joint shaft) 13. Adjusted air pressure of the locking cylinders gripping 3.0bar 14th weight 1100 kg

1 rimless hydro extractor made KRANTZ, type GLEITSCHWINGER 1500x700 Inside drum diameter 1.500 mm, inside drum height 700 mm Machine is special reinforced execution with round base support and 4 Gleitschwinger feet

Metal parts washer to the degreasing or similarly to the rim and tyre washing suitable electrically heated parts basket revolves in wash 400 Volt 16 amp CEE con

Fully hydraulic curved roller Shear make PARX type KRS 2Machine -No: 3728 Series 61/72, year of construction 1973Shearing power b. 40 kg / mm2 strength: 6 mmShearing power b. 70 kg / mm2 strength: 4 mmProjection between stand and knife: 1050 mmStand opening height: 300 mmmin Curve radius: 75 mmmin. Rondendiam.:290 / 180 mmMax. Rondendrm. from 4-corner sheet: 2750 mmminute Flaring rim: 450 mmMax. Beading height: 50 mmMax. Beading radius: 35 mmCutting speed stepless: 0 - 12 m / min.Power requirement: 6 hpWeight: 1.85 t (without mandrel centering)Outside dimensions: 3000 x 900 x 2000 mm(without mandrel centering)With- full hydr. drive- graduated Speed control- Const. Starting and working torque- Automatic workpiece feed- Contour cutting (cropping)- Circular section- Spiral cut- Beading- with adjustable Thorn centeringused, from operational resolution, in good conditionPrice on request.Deliv ...

Jupiter JU 45 Walter Plant Machines Nr: + # 2055 Number of baking tongs 45 Upper engraving 5 x 5 mm Underengengravings 5 x 5 mm Edge yes Tool 22 ° Gas Propan Location: Germany The machine is used to make sweet, rotated squirrels with or without a rim and is sold with a tool for 22 °. The conveyor belt and stacking table are included. The machine is currently in storage.

Grinding width mm 1300 Grinding units total 6 Ribbons 4 Grinding rollers 1 Steel roller Segment grinding shoe electronic Paint intermediate grinding Vacuum table Table height constant Grinding belt length mm 2620 Further technical data Machine control HEESEMANN SMA PC11/40 Oscillation HEESEMANN CSD Turning direction reversal Ionizing device Workpiece thickness min mm 3 Pass-through height mm 80 Grinding shoes total 1 Segment width mm 16 Grinding brush unit Roller grinding brushes Cleaning brush dust removal machine Main motor kW 31 Band speed max m/s 24 Grinding belt swarm. adjustable infinitely variable Feed max m/min 28 Feed Stepless Blow-off device grinding belt Segment control electromagnetic Aggregates frequency-controlled 5 Cross-bands adjustable infinitely variable Aggregate configuration w-q-s-q-q-q-b Pressure lamella rim unit transverse  ...

max. wheel diameter: 1600 mm gear width: 457 mm max. module: 12,5 min. module: 2 spindle bore: 222 mm stroke: 15-120 Hub/min roll feed: 0.3 - 0.84 mm/min down feeds: mm/Hub electrics - voltage/frequency: 380 / 50 V/Hz total power requirement: 10 kW weight of the machine ca.: 20 t dimensions of the machine ca.: 3,5 x 3,3 x 2,5 m EXTERNAL GEARS: Blank diameter:- Max 63 1600 mm Min 0 0 Face width, double helical 0 - 18 0 - 457 mm Face width, spur or single helical 0 - 10 0 - 254 mm INTERNAL GEARS: Blank diameter:- Max 66 1676 mm Face width 0 - 8 0 - 203 mm P.C.D.:- Max 66- (2 x rim thickness) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.