ridge roller machine used for sale

: neu : ca. 10 Wochen ab Auftrags : Türkei : 5750 € : 118.45 € : 1270 mm : 1.5 mm : 75 mm : 1.5 kW : 1830 mm : 700 mm : 1160 mm : 400 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by ratchet lever longitudinal grooves in lower and lateral roll tiltable upper roll hardened rollers right / left rotation with double foot switch user manual in GERMAN or ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 9660 : ca. 10 Wochen ab Auftrags : Türkei : 7800 € : 160.68 € : 1 : 1050 mm : 3 mm : 90 mm : 6 m/min : 1.1 kW : 1630 mm : 700 mm : 1200 mm : 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll hardened rolls tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 3100 € : 1270 mm : 1.2 mm : 68 mm : 1.5 kW : 1610 mm : 700 mm : 1160 mm : 385 kg 3 Walzen asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 14000 € : 285.6 € : 1270 mm : 5 mm : 140 mm : 3,5 m/min : 2.2 kW : 2470 mm : 750 mm : 1000 mm : 1350 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls€ 1.500,- Motorised Back Roll (Power Rear Roll)€ 1.200,- Digital Read-Out€ 1.200,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Usefull width: 1400 mm. Staining roller out of soft sponge rubber Membrane pump

Bending capacity: Plate width: 3000 mm Plate thickness 140 mm Thickness max 200 mm depending on plate width and yield strength Technical data: 3100 mm Surface useful length on rolls 940 mm size of Top roll 840 mm size of Lower rolls 210 mm max thickness opening between the rolls 400/50 Vac voltage - rewirable 480/60 220 Hp Power electric installed Configuration installed with the machine Hardened surface of the 3 rolls. Conical plate bending hydraulic attachment with hardened contrast pad. All the 3 rolls driven with axial gearbox and motor each roll independent Calibration system for the re-rolling of welded shells rounding unwanted flat spots. Console electric on wheels with centralized commands joysticks and digital readout. Opening front side hydraulic drop-end to unload closed shells. Variable speed working slow/fast. Emergency systems  ...

Max. length of plate 2000 mm Max. plate thickness 16 mm Number of rolls 3 pcs Max. pre bending capacity 13 mm Main motor power 15 HP

sheet width: 700 mm plate thickness: 4,0 mm distance between columns: 720 mm diameter of upper rolls: 95 mm total power requirement: 1,1 KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 0,95 x 0,76 x 1,25 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2023 : 9654 : prompt, Zwischenverkauf v : Türkei : 2400 € : 1 : 1 : 1050 mm : 1 mm : 56 mm : 1400 mm : 700 mm : 1120 mm : 185 kg 3 Walzen asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3-roll hydraulic 3000x30 mm pre-pinch planetary MG model G3030 year 2021 -Plate width 3000 mm -Capacity thickness 30 mm -Pre-pinch 25 mm -width on the rolls 3100 mm -upper roll size 400 mm -lower rolls size 380 mm -Hardened rolls surface. -All driven 3rolls gear box motorized each synchronized rotation -Conical plate bending attachment , rolls tilting & contrast roller. -Operator console with directional joysticks and digital readouts -Front drop-end open hydraulic -Emergency and safety installation -User manuals and instruction books. -Electric power 25 HP on the hydraulic unit. -V400/50

: neu : ca. 12 Wochen ab Auftrags : Türkei : 60500 € : 2050 mm : 16 mm : 16 mm : 13 mm : 10 mm : 260 mm : 260 mm : 200 mm : 1,5-6 m/min : 7.5 kW : 4300 mm : 1460 mm : 1550 mm : 6000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad was creat ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 59000 € : 2550 mm : 10 mm : 10 mm : 8 mm : 6 mm : 245 mm : 245 mm : 180 mm : 1,5-6 m/min : 7.5 kW : 4800 mm : 1425 mm : 1470 mm : 5700 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad was created ...

- Producer Giardina - Type G 95 / 05 - Year of construction 1997 - Working width 1.300 mm - Working height 900 mm +-20 mm - Part height 3 - 90 mm - Operating side, right - Roller for lacquer ca. 55 Shore - Metering roller 165 mm - Reverse drive - Total connection power 3,4 kW - Weight 1600 kg - With switch cabinet - Voltage / HZ 400 / 50 - Location, on stock D-32825 Blomberg - Commodity code 8479 8997 - Voltage fluctuation max. +/- 5 %

Max. length of plate 3000 mm Max. plate thickness 40 mm Number of rolls 3 pcs Upper roll diameter 550 mm Lower roll diameter 450 mm Control Roundo WCN Main motor power 94 Kw Equipped with: Pre-bending, hydraulic Three roll drive Cone bending divice Electro-hydraulic operation of drop-end Top support Side supports Roller conveyor Service tools etc.

Swivel bending machine, cant bench, gutters, roof gutters, beading machine, beading machine - Folding machine: with roller shears -Max. Working width: 1000 mm -Clamping: Eccentric clamping -Dimensions: 1390/200/H400 mm -Weight: 34kg

Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trucks, armored rollers, machine transport rollers -Load capacity: 1000 kg -Type: 4567005 -Dimensions: 500/340 / H105 mm -Weight: 17 kg - only 1 piece available

Ring bending machine, profile bending machine, three-roll bending machine, bending machine -Replacement rollers -Tool for: Ø 35 mm pipe -Outside: Ø 200 mm -Bore: 49mm -Quantity: 4 rolls available -Price: complete -Weight: 44kg

Coating roller machine, roller application machine -Transfer in current condition as seen -Manufacturer: Giardina -Max. Width: 1260 mm -Casting gap: adjustable -with: 3x brush units -Connection power: 11 kW -Dimensions: 4600/2360/H1600 mm -Weight: approx. 4000 kg

: neu : ca. 12 Wochen ab Auftrags : Türkei : 49000 € : 994.7 € : 1550 mm : 12 mm : 12 mm : 10 mm : 10 mm : 8 mm : 220 mm : 200 mm : 160 mm : 1,5 / 6 m/min : 5.5 kW : 3900 mm : 1150 mm : 1250 mm : 3600 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll leng ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 27000 € : 548.1 € : 1050 mm : 2.5 mm : 2.5 mm : 2 mm : 90 mm : 4,5 m/min : 2.2 kW : 2250 mm : 1000 mm : 1500 mm : 900 kg FOR ROUND AND ELEPTIC SHAPES FOR MASS PRODUCTION (CYCLE UP TO ONLY 20 SEC POSSIBLE) 4 rolls NC control with touchscreen Top roll driven by hydromotor and plantary gearbox Hydraulic drop end Mobile control panel Hardened rolls Operating manual in English or German OPTION: Feeding table price on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1000 mm plate thickness: 3,3 mm distance between columns: 1050 mm diameter of upper rolls: 90 mm total power requirement: 1,1 KW weight of the machine ca.: 0,445 t dimensions of the machine ca.: 1,5 x 0,9 x 1,25 mm Sheet metal bending machine with special dimensions: - Capacity 700 x 4 mm - Conical bending - Swing-out top roller - Emergency release safety device - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1000 mm plate thickness: 3,3 mm distance between columns: 1050 mm diameter of upper rolls: 90 mm total power requirement: 1,1 KW weight of the machine ca.: 0,39 t dimensions of the machine ca.: 1,4 x 0,9 x 1,2 mm Sheet metal bending machine with special dimensions: - Capacity 700 x 4 mm - Conical bending - Swing-out top roller - Emergency release safety device - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Zweiwalzenanleimmaschinen / Two Roller Gluing Machine Traenklein ZW 400 Year 2007 - Serial-No. 8383 Arbeitsbreite / Working width max. 400mm Kaltleim / Cold Glue Messing-Walzen / Brass-Rollers  Ø 80 mm Elektrischer Anschluss / Power supply: 400V / 50Hz / 0,25KW -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test -Je nach Einsatzzweck koennen die Maschinen mit entsprechenden Sondereinrichtungen ergaenzt werden.

Code: 0282 Brand: GMC Model: ROLL V 1400 Automatic 2-roller polishing machine for polyester and varnish - It is suitable for buffing of high gloss polyester or polyurethane paints, metals, marble and similar materials N° 2 rollers: one straight and one inclined - Thanks to this inclination, the rotating brushes, by oscillating, ensure a perfect polishing of the surfaces to be treated REVERSE" system , which restrains softens the reverses even with heavy materials like marble, wooden panels, etc. Length of 2 rollers mm 1400 Roller diameter mm 350 Useful working length mm 4500 Useful working width mm 1400 Motor hp 15 Working table height from mm 950 to mm 1180 Suction mouth diameter mm 200 Overall dimensions mm 6000 x 2350 x 1750 h Weight kg 2500

Zweiwalzenanleimmaschinen / Two Roller Gluing Machine Prakma AM400 Arbeitsbreite / Working width max. 400mm Kaltleim / Cold Glue Messing-Walzen / Brass-Rollers  Ø 80 mm Elektrischer Anschluss / Power supply: 400V / 50Hz / 0,25KW -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Table dimensions: 1400x4000mm, feed rate: 2-16m/min, length: 4500mm, width: 10,500mm, with documentation.

Machine bed length: 16,000mm, roller table diameter: 200mm, load: 150kg/m, band width/ length: 150/ 3500mm, with documentation, the machine needs overhauling.

Working length: 3100mm, sheet thickness rounding/ bending: 40/32mm, top/side roll diameter: 460/ 420mm, connected load: 30kW, with documentation, on-site inspection is possible.

Working width: 2000mm, max. sheet thickness: 13mm, can be used horizontally and vertically, with decoiler, decoiler driven and hydraulically adjustable to coil diameter.

Working width: 3000mm, max. sheet thickness: 120mm, with optical display of roller adjustment, central lubrication, cone bending device, overrun brake and exchange top roller Ø820mm and Ø740mm.

Working width: 2500mm, max. sheet thickness: 20mm, lateral cylinder support device with three adjustable support rollers and conical bending device, machine provided for exchangeable top rollers up to min. Ø 450mm, machine revision 2009, factory inspection 2012.

Working width: 3000mm, max. sheet thickness: 110mm, with CNC control, central lubrication, cone bending device, infeed carriage, one upper and two lateral cylinder support devices.

Working width: 3000mm, max. sheet thickness: 15mm, with digital display of roller adjustment, driven rollers, mobile control panel, cone bending device, upper and lateral cylinder support device.

Working width: 3000mm, max. sheet thickness: 12mm, with digital display of roller adjustment, central lubrication, air cooling, cone bending device and CNC controls.

Working width: 2500mm, max. sheet thickness: 20mm, with optical display of roller adjustment, central lubrication, cone bending device and overrun brake.

Working width: 1250mm, max sheet thickness: 3mm, with loading table, vacuum lifter, feed table with rollers, ejector, output table, control panel and manual, inspection is possible, available from March 2024.

Eroding diameter: 100-420mm, max. roll length: 2500mm, roll weight: 8t, eroding length: 11mm, number of electrodes: 60, length: 5000mm, width: 2000mm, height: 1200mm, weight: 25t, with documentation, inspection is possible.

Equipped with "Elektra Beckum" SPA1700D extraction unit 230v; "Emmegi" Fermo V18 C3780 discharge roller bench 300 x 3450 mm (transport size: 570 x 4100 mm 180 kg) with digital counter; 16A 5-pin socket (50Hz); protective cover; up to 130 mm square cutting range; Saw cooling

sheet width: 700 mm plate thickness: 2,0 mm distance between columns: 750 mm diameter of upper rolls: 76 mm total power requirement: ß,75 KW weight of the machine ca.: 0,29 t dimensions of the machine ca.: 1,3 x 0,8 x 1,3 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Upper and lower roller driven, feed roller without drive - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Einwalzen-Anleimmaschine / Single Roller Gluing Machine Sumbel ENANO Arbeitsbreite max. 250 mm / Working width 250 mm Kaltleim / Cold glue Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Zweiwalzen Anleimmaschine  / Two-roller Gluing Machine Sumbel Herold Serial-No. 110 Walzenbreite 500mm / Roller width 500mm Arbeitsgeschwindigkeit / Working Speed 4 - 20m/min fuer Kaltleim / for cold glue Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

: neu : ca. 12 Wochen ab Auftrags : Türkei : 23000 € : 471.5 € : 1550 mm : 4.5 mm : 4.5 mm : 3.5 mm : 4.5 mm : 3.5 mm : 3.5 mm : 2.5 mm : 130 mm : 130 mm : 130 mm : 5 m/min : 2,2 + 1,1 kW : 3300 mm : 1150 mm : 1110 mm : 2370 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 40500 € : 822.15 € : 2050 mm : 8 mm : 8 mm : 6 mm : 6 mm : 4 mm : 180 mm : 180 mm : 150 mm : 1,5 / 6 m/min : 5.5 kW : 4400 mm : 1150 mm : 1250 mm : 3790 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 45900 € : 931.77 € : 2050 mm : 10 mm : 10 mm : 8 mm : 8 mm : 6 mm : 200 - 220 mm : 200 - 220 mm : 160 mm : 1,5 / 6 m/min : 5.5 kW : 4400 mm : 1150 mm : 1250 mm : 3950 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % o ...

Dimensions 1,6 x 1,4 x 1,44 m Grindstone diameter 250mm Diameter of rolls 0,13 … 1,1m Grinding cross Movement 200mm Grinding longitudinal Movement 450mm Consumable power 3kW Consumable power 3,5 kW Electrical connection of the unit - 380V, 50Hz, 3 phases. Weight 545 kg

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 126200 € : 2511.38 € : 3100 mm : 25 mm : 25 mm : 20 mm : 20 mm : 20 mm : 16 mm : 360 mm : 360 mm : 270 mm : 60 mm : 1510 mm : 22 kW : 5560 mm : 2060 mm : 2050 mm : 16750 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software solu ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 58900 € : 1183.89 € : 2050 mm : 13 mm : 10 mm : 13 mm : 10 mm : 10 mm : 8 mm : 240 mm : 240 mm : 190 mm : 820 mm : 11 kW : 3830 mm : 1160 mm : 1200 mm : 5000 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software solution of Logo ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 66200 € : 1330.62 € : 3100 mm : 8 mm : 8 mm : 6 mm : 6 mm : 5 mm : 240 mm : 240 mm : 190 mm : 825 mm : 11 kW : 4880 mm : 1160 mm : 1200 mm : 6450 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls ar ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 78900 € : 1585.89 € : 2550 mm : 15 mm : 15 mm : 13 mm : 12 mm : 12 mm : 10 mm : 270 mm : 270 mm : 230 mm : 50 mm : 1155 mm : 15 kW : 4760 mm : 1660 mm : 1155 mm : 8950 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll le ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 92800 € : 1865.28 € : 3100 mm : 16 mm : 16 mm : 13 mm : 16 mm : 14 mm : 12 mm : 300 mm : 300 mm : 240 mm : 50 mm : 1140 mm : 18.5 kW : 5310 mm : 1660 mm : 1140 mm : 11100 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software sol ...