We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,233 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Moving bezel, moving bezel, bezel, steady rest, lynette -Bezel. traveling, from a WMW DLZ 800 lathe -Max. Passage: Ø 210 mm -Technical drawing: in the photos -Dimensions: 440/430 / H700 mm -Weight: 66 kg
used
Komplette Hackanlage LINDNER 150/400 37kW mit Vibrorinne ca. 17 m, Siebzone ca. 5m, Bogenfoerderer ca. 6 m Hoehe, Laengskratzer in 3 Bunker ca.12m, Trommelsieb; ready for work
used
1 detailed with set stock for SN 63
new
We sell a complete package from bearing resolution. Mounting material for photovoltaic systems open space The following positions are included in the package: Central Terminal profiles, end clamp profiles, potential balancing ropes, Checker Advancende DC70A cabinets (GAK passing element, fully assembled), connection profiles (profiles), solar cables. It's new product. We will send you a detailed statement you request. Price on request.
used
M. No.: 0392 Equipment / Additional information: Feeding width (mm): 500 Kw: 7.5 A: 380
used
Hydraulic self-centering bezel, Luenette, Lynette SMW AUTOBLOK Hydraulic bezel with hydrostatic bearing Suitable for GILDEMEISTER / MAX MÜLLER Lathe MD 5 Type: SLK 8-70 N Clamping range: 8 to 70 mm Operating pressure: approx. 60 bar Bezel base: 245 x 240 mm Type: fixed - 3 pieces roller bearing 35 mm- roll width 18 mm - hydraulically self-centering Dimensions L x W x H: 350 x 250 x 550 mm Net weight: 65 kg good condition; used
used
Bezel, stick, lynette -Max. Passage: Ø 70 mm -Tip height: 250 mm -Weight: 10 kg
used
Description: Serial number: 0199 Clamping range: 125 - 460 mm Operating pressure: max. 60 bar Piston flanges: 132.7 cm³ weight approx.: 500 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 500 mm
used
GeneralIntegrated Mill Turn Center; Control: Control F31iB5 with CELOS CharacteristicsSwing- Ø, max.700 mmSpeed max.12000 rpmSlewability of B-Axis±120 degreeMovements X / Z / Y675/1562/300 (±150) mmMilling spindle upper side1 Bar diametre80 mmMax. Turning Length1530 mmSpeed max.4000 rpmMax machining diameter670 mmDrive power tool spindle5,5/3,7 kWDrive power milling spindle28/23 kWDrive power main spindle18,5/15 kWMovements X / Z200/1542 mmLower Turret10 PositionsNumber of Toolmagazine positions38 Weight approx.18500 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p(Left Spindle) through-spindle hole dia. 91 mm, 4,000min-1 (STD)(Left Spindle) Through-spindle Hol ...
used
KARATS DH-30 CNC Deep Hole Borer Manufactured year 2017 Main specification ● Height from Bed sliding to center of Chuck 2,900 mm ● Swing over bed 5,800 mm ● Drilling capacity 56~650 mm dia ● Distance between center 25,500 mm ● Max. working length 24,000 mm ● Max. workpiece load capacity (with 2 Steady rest ) 380 tons ● Max. workpiece clamping dia 3,400 mm Bed ● Total length of Bed 53,850 mm ● Width of Bed 2,500 mm ● Height of Bed 700 mm Headstock ● Spindle shaft dia 800 mm ● Spindle rotating speed 160 rpm ● Chuck size 2,500 mm ● The clamping dia on Chuck 600 ~1,600 mm ( Design 480~1,680 mm ) Boring head ( A-axis) ● The feed for working 14,000 mm ● Max. feeding 25,870 mm ● Min. distance from Chuck 21,300 mm ● Max.. distance from Chuck 47,170 mm ● Rapid feeding speed 4,000 mm/min ...
used
Manufacturer GEMINIS Model GHT-5 G2 1000 x 9000 Year 2.007 CNC HEIDENHAIN 4110 MANUAL PLUS Capacities and feeds Max. swing over Bed Ø 1.000 mm. Max. swing Ø 1.000 mm. Max swing over cross slide Ø 680 mm. Center height 500 mm. Distance between centres 9.000 mm. Rapid feed (X/Z) 8 m/min Main Spindle Turning speeds 0-1400 rpm Quill travel 102 mm. Spindle nose DIN-55026 -B11 Spindle automatic ranges 4 Main spindle power 37 kW Turret Turret positions 8 Turret type VDI 50 (Ø 470 mm) Driven tools power 5.5 kW Tailstock Tailstock quill travel 300 mm Ø tailstock quill 140 mm Max weight between centres Without steady rest 4.800 kg With 1 steady rest 5.500 kg With 2 steady rests 6.200 kg Extra Equipment C Axis and driven tools INCLUDED 1 Axial driven toolholder INCLUDED 2 radial driven toolholders INCLUDED 25 tool holders (VDI 50) INCLUDED 10 set of Jaws ...
GeneralCNC Turning Centre; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways710 mmTransverse stroke260 mmLongitudinal stroke1345 mmClamping chuck diameter max.315 mmMain drive 1Drive power (100% DC)22 kWSpeed range- 4000 rpmTorque (100% DC)410 NmMax. torque (40% DC)525 NmAccuracy at point stopping0,001 degreeWork spindle (left)Spindle bore91 mmSpindle diametre on front bearing140 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (100% DC)10 kWFloor space/WeightDimensions (L x W x H)5,4 x 2,07 x 2,6 mWeight approx.7800 KgTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with Siemens control)Chuck rinsing device, outsidechuck rinsing device, outside (main spindle)Main s ...
used
Horizontal boring milling machine AYCE model AC100-K4 with continuous variation of advances and cnc Heidenhain TNC124 - Automatic positioning of the table rotation 4 x 90º. - Vertical course 1200mm (Instead of 1000mm that the standard model has) - Refrigeration equipment - Face plate and clamping arm - Universal vertical apparatus, Huron type with hydraulic tool clamping - Rest for vertical course of 1200mm - Table rotation display 4th AXIS (B) Principal axis: - Shaft diameter: 100mm - Inner cone: ISO 50 with quick tool clamping (Instead of Morse 5) - Drill mounting diameter: 171.45mm - Horizontal course of the main axis: 700mm - Vertical course of the main axis: 1200mm - Number of turning speeds: 18 - Speed range: 12-1200 rpm - Maximum distance between plate and steady rest: 2250mm Advances: - Number of work advances in all directions: INFINITE - Min/ma ...
used
GeneralTurning Center; Control: Control M730UM CharacteristicsMax machining diameter366 mmDimensions (L x W x H)3,84 x 2,36 x 1,80 mDrive power tool spindle7,5/5,3/3,7 kWDrive power main spindle22/11 kWRapid feed X / Z30/30 m/minInput precision of C-axis on Mainspindle0,001 degreeMovements X / Z250/1143 mmRotary tool spindle speed6000 rpmNumber of tool stations12 Speed max.4500 rpmBar diameter max.65 mmSpindle bore73 mmSwing- Ø, max.760 mmMax. Turning Length1085 mmWeight approx.6500 KgSLIMlineSLIMline DMG MORI operating system equipped with MAPPS. The large 15-inch display can reduce the number of switching of the screen as it provides the four-way split screen and allows user to see more information at once. It is also possible to customi(Spindle 1) 22/15/11 kW,4,500 min-1 (Standard)(Spindle 1) Standard Spindle 22/15/11 kW (30/20/15 HP), 4,500 min-1 The ALX2000 adopts a highly reliable ...
used
GeneralTurning-milling centre; Control: Fanuc 31iB5 CharacteristicsSwing- Ø, max.1070 mmDrive power milling spindle22 kWDrive power second spindle22 kWDrive power main spindle22 kWNumber of Toolmagazine positions50 Speed max.8000 rpmSlewability of B-Axis1 degreeMovements X / Z / Y1040/+-330/3150 mmMilling spindle upper side1 Input precision of C-axis on Counterspindle0,0001 degreeBar diametre164 mmSpindle speed 2nd Spindle max.1500 rpmInput precision of C-axis on Mainspindle0,0001 degreeBar diametre164 mmSpeed max.1500 rpmMax. Turning Length3076 mmMax machining diameter1070 mmWeight approx.46000 KgTool spindle full indexing specificationsErhöhung der mögl. Indexierung der B-Achse auf 0,0001º Einrichtung zur Positionierung der B-Achse mit einem minimalen Winkel von 0,0001º anstelle der Standardausführung mit 1º, einschließlich der Option Direktes Wegmesssystem in der B-Achse derSp ...
used
Kramatorsk KJ 1910 10-meter boring depth - Heavy duty: 25-ton workpiece >>> NOTE: MACHINE IS IN OUR WAREHOUSE IN ITALY < < < Heavy duty: Max. work-piece weight 25 tons Spindle motor kW 85 Counter rotation motor 90kW Spindle hole diameter mm 700 Max. boring diameter, mm 600 Center height over the bed, mm 670 Max. work piece external diameter, mm 1300 Work piece length range on one-sided machining, mm 1000...10000 Work piece diameter range, mm: - in chuck of faceplate 200...1100 - in open rest 400...900 - in closed rest 200...630 - in round rest 250...550 Spindle speeds range, rpm 2...200 Machine overall dimensions, approx mtrs 31 x 3 x 2,3 Machine weight, kg 90000 (approx)
used
Deep hole boring machine - heavy duty deep hole boring machine Kramatorsk (Russia) KJ 1910 Year of manufacture 1986 Maximum boring diameter, mm 600 Maximum use of lenght mm 10000 (10 meters) Max 25 ton Machine in our warehouse in Northern Italy Center height over the bed, mm 670 Maximum work piece external diameter, mm 1300 Work piece length range on one-sided machining, mm 1000.. 10000 Work piece diameter range, mm: -in chuck of faceplate 200th.. 1100 -in open rest 400... 900 -in closed rest 200... 630 -in round rest 250... 550 Maximum work piece weight 25000 kg Range, 2 200 rpm spindle speeds Spindle diameter hole mm 700, Main motor power, kW 85 Counter rotation motor is 95kW Machine overall dimensions, mm 25550 x 3000 x 2290 Machine weight, kg 83000 Mimu machine tools (Italy) machine tools
used
Kramatorsk KJ 1910 10-meter boring depth - Heavy duty: 25-ton workpiece >>> NOTE: MACHINE IS IN OUR WAREHOUSE IN ITALY < < < Heavy duty: Max. work-piece weight 25 tons Spindle motor kW 85 Counter rotation motor 90kW Spindle hole diameter mm 700 Max. boring diameter, mm 600 Center height over the bed, mm 670 Max. work piece external diameter, mm 1300 Work piece length range on one-sided machining, mm 1000...10000 Work piece diameter range, mm: - in chuck of faceplate 200...1100 - in open rest 400...900 - in closed rest 200...630 - in round rest 250...550 Spindle speeds range, rpm 2...200 Machine overall dimensions, approx mtrs 31 x 3 x 2,3 Machine weight, kg 90000 (approx)
used
Merli Clovis 70 heavy lathe. Distance between centers: 8000mm. Swing: 1650mm. Swing in carriage: 1170mm. Bore: 206mm. Bed width: 1000mm. Speeds: 16.(3-300). Maximun weight without steady rest: 15.000Kgs. Maximun weight with 1 steady rest: 20.000Kgs. Equipped with chuck of 1400mm. Equipped with DRO. Equipped with 2 steady rest. Equipped with CE protections and CE certificate for second hand machines.
used
turning diameter over bed: 1250 mm turning diameter over slide rest: 1000 mm turning length: 11000 mm total power requirement: kW weight of the machine ca.: 49 t dimensions of the machine ca.: m Center height 720 mm Center distance 11000 mm Turning diameter over bed 1250 mm Turning diameter over slide 1000 mm Workpiece weight max 12 to Speed 3-315 rpm - stepless Motor power 55 kW (DC) Equipment 1 position indicator HEIDENHAIN | Type ND 780 for 1 axis 1 four-jaw faceplate Ø 1000 mm 1 fixed steady rest 1 ring steady rest with four-jaw faceplate Ø 920 mm 1 Autom. 4-pos. tool holder 1 Chip conveyor 1 Machine lamp 1 Coolant device Operating key | operating manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
centre distance: 8500 mm turning diameter over bed: 1070 mm turning diameter over slide rest: 800 mm spindle bore: 128 mm turning speeds: 1,12 - 1120 U/min Control: Alan Bradley 9-series total power requirement: 62 kW weight of the machine ca.: t dimensions of the machine ca.: m 3 Shear Bed, Carriage can bypass Steady Rest and Tailstock 6-position Sauter Turret 360 mm Capacity Self Centering Hydraulic Steady Rest 385 mm Capacity Rotaring Work Support (Used for Gun Barrels) 800 mm 4-Jaw Chuck Tailstock Quill diameter Ø 200 mm Tailstock Taper M.T. 6 Chip Conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter: 1120 mm turning length: 6000 mm swing diameter over bed slide: 760 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: Colombo Type: VUP 2S Year of make: 1978 Distance between centers: 6.000 mm Centre height: 560 mm Swing over bed: 1.120 mm ø Swing over support: 760 mm ø 4-Jaw chuck: 1.000 mm ø Digital read-out: Sony Including: 1 x steady rest 520 mm ø 1 x steady rest 950 mm ø 1 x open steady rest Chisel holder Chisel support automatic feed Rapid traverse chisel support Electrically movable counter center Drilling bar: length 2046 mm x 170 mm ø The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Kramatorsk KJ 1910 10-meter boring depth - Heavy duty: 25-ton workpiece >>> NOTE: MACHINE IS IN OUR WAREHOUSE IN ITALY Heavy duty: Max. work-piece weight 25 tons Spindle motor kW 85 Counter rotation motor 90kW Spindle hole diameter mm 700 Max. boring diameter, mm 600 2z2p7f Center height over the bed, mm 670 Max. work piece external diameter, mm 1300 Work piece length range on one-sided machining, mm 1000...10000 Work piece diameter range, mm: - in chuck of faceplate 200...1100 - in open rest 400...900 - in closed rest 200...630 - in round rest 250...550 Spindle speeds range, rpm 2...200 Machine overall dimensions, approx mtrs 31 x 3 x 2,3 Machine weight, kg 90000 (approx) Machine in our wahouse (I-25064 Gussago - BS - Italy) tieflochbohrmaschine, taradeuse trous profonds
used
Manufacturer DOOSAN Model PUMA 700 LM Year 2005 CNC FANUC 21i TD Capacities Ø Swing over bed 1.030 mm. Ø swing over saddle 800 mm Max turning diameter 900 mm. Max turning length 3.200 mm. C Axis and Driven Tools INCLUDED Chuck size 24” Bar working diameter 164mm. Travels and feedrates X travel 470 mm. Z travel 3.235 mm. Rapid traverse rate X/ Z Axis 12/10 m/min Main spindle Max spindle speed 1500 rpm Speed ranges 2 Main spindle power 75/60 kW Main spindle torque 11.004 Nm Spidle nose A1 – 15 C Axis. Positioning Precision 0,001º Turret No of tool stations 12 Turret tool size 32 x 32 mm Max boring bar size 80 mm. Turret Indexig Time 0.25 s. Rotary tool motor power 11 kW Max rotary tool speed 3.000 rpm. Tailstock Tailstock travel 3.135 mm. Quill diameter 160 mm Quill travel 150 mm Quill bore taper #6 Equipment 3 Jaw-Hydraulic chuck Ø600 mm I ...
used
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 134 mm -Edition: gray cast iron -Intermediate dimension: 280 mm -Tip height: 250 mm -Drawing with the photos -Dimensions: 560/350/H440 mm -Weight: 36 kg
used
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 110 mm -Edition: gray cast iron -Hole spacing: 100 mm -Tip height: 70 mm -Drawing with the photos -Dimensions: 340/300/H150 mm -Weight: 18 kg
used
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 150 mm -Edition: gray cast iron -Hole spacing: 395 mm -Tip height: 240 mm -Drawings with the photos -Dimensions: 480/455/H470 mm -Weight: 25 kg
used
Moving steady rest, moving steady rest, steady rest, lynette -max: passage: Ø 140 mm -Edition: gunmetal -Hole spacing: 335 mm -Tip height: 215 mm -Drawing with the photos -Dimensions: 450/100/H540 mm -Weight: 26 kg
used
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 124 mm -Edition: gray cast iron -Hole spacing: 335 mm -Tip height: 215 mm -Drawing with the photos -Dimensions: 380/90/H400 mm -Weight: 14 kg
used
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 90 mm -Edition: gray cast iron -Hole spacing: 160 mm -Tip height: 150 mm -Drawing with the photos -Number: 1x bezels available -Price: per piece -Dimensions: 430/230/H110 mm -Weight: 10 kg
used
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 110 mm -Edition: gray cast iron -Hole spacing: 120 mm -Tip height: 115 mm -Drawing with the photos -Dimensions: 380/260/H65 mm -Weight: 8 kg
used
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 150 mm -Edition: gray cast iron -Hole spacing: 420 mm -Tip height: 210 mm -Drawing with the photos -Dimensions: 500/485/H80 mm -Weight: 18 kg
used
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 120 mm -Edition: gray cast iron -Hole spacing: 135 mm -Tip height: 145 mm -Drawing with the photos -Number: 3x bezels available -Price: per piece -Dimensions: 370/280/H90 mm -Weight: 10 kg
used
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 120 mm -Edition: gray cast iron -Hole spacing: 135 mm -Tip height: 145 mm -Drawing with the photos -Dimensions: 370/280/H90 mm -Weight: 10 kg
used
Moving steady rest, moving steady rest, steady rest, lynette -max. passage: Ø 80 mm -Edition: gray cast iron -Hole spacing: 340 mm -Tip height: 150 mm -Dimensions: 390/70/H320 mm -Weight: 12 kg
used
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 90 mm -Plating: brass -Hole spacing: 340 mm -Tip height: 200 mm -Drawing with the photos -Dimensions: 400/260/H430 mm -Weight: 26 kg
used
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 80 mm -Edition: gunmetal -Hole spacing: 90 mm -Tip height: 165 mm -Drawings with the photos -Dimensions: 210/190/H330 mm -Weight: 8 kg
used
turning diameter: max. 1.070 mm turning length: max. 3.076 mm control: Fanuc 31iB5 MAPPS max. swing diameter: 1.070 mm Max. distance between centres: 3.510 mm axis stroke:: x-axis: 1.040 (1.000 + 40) mm y-axis: +/- 330 mm z-axis: 3.150 mm b-axis: +/- 120 ° z-axis: 2: max. 2.440 mm Main spindle:: max. spindle speed: 1.500 min/-1 Number of speed ranges: 2 power capacity - main spindel: 30 / 26 kW max. Torque: 3.254 Nm spindle bearing diameter: 260 mm spindle bore: 185 mm max. usable bar diameter: 164 mm C-Axis: 0,0001 ° spindle nose: JIS A2-15 Subspindle:: max. spindle speed: 1.500 min/-1 Number of speed ranges: 2 power capacity - Sub spindle: 30 / 26 kW max. Torque: 3.254 Nm spindle bearing diameter: 260 mm spindle bore: 185 mm max. usable bar diameter: 164 mm C-Axis: 0,0001 ° spindle nose: JIS A2-15 Work tool spindle:: Max. rpm: 8.000 min/-1 power capacity: 30 / 22 kW max. Torque: ...
used
core boring: 70-560 mm bore depth: 20000 mm drilling diameter: 70-500 mm core boring capacity in St 60 - reboring: special: 560-1000 mm workpiece diameter: 3200 mm workpiece weight: 200 t faceplate diameter: 2900 mm speed of boring spindle:: 100 - 500 U/min feed range: 3 - 2000 mm/min boring spindle drive: 55 kW spindle head drive: 150 kW workpiece turning speeds: 230 U/min control: Fanuc total power requirement: - kW weight of the machine ca.: - t 2010 Retrofitted equipped with: - Fanuc Control - 4-Jaw Chuck - Oil Pressure Head - Boring Head - Drill Head - 2-Point Rollers Steady Rest (4) - 3 Point Steady Rest (2) - Bar Rest (2) - Coolant & Coolant Piping - Chip Conveyor - Honing Oil Tank & Honing Tool Bars The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Moving steady rest, moving steady rest, steady rest, lynette -Bezel: pneumatically exciting -Type: SLK 087-1070/3 -Rollers: cylindrical -Dimensions/clamping range: see photos -Dimensions: 365/225/H370 mm -Weight: 43 kg
used
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 50 mm -Hole spacing: 388 mm -Tip height: 153 mm -Drawing: in the photos -Dimensions: 430/90/H360 mm -Weight: 14 kg
used
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 90 mm -Tip height: 140 mm -Drawings: with the photos -Dimensions: 260/50/H360 mm -Weight: 9 kg
used
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 145 mm -Edition: gray cast iron -Intermediate dimension: 280 mm -Tip height: 250 mm -Dimensions: 570/345/H430 mm -Weight: 32 kg
used
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 74 mm -Edition: gunmetal -Tip height: 185 mm -Drawings: with the photos -Price: per piece -Number: 1x available -Dimensions: 370/75/H385 mm -Weight: 11.1 kg
used
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 200 mm -Plating: brass -Tip height: 230 mm -Drawings with the photos -Price: per piece -Number: 1x available -Dimensions: 530/200/H740 mm -Weight: 100 kg
used
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 175 mm -Edition: plastic -Tip height: 250 mm -Drawings with the photos -Price: per piece -Number: 1x available -Dimensions: 560/100/H580 mm -Weight: 25 kg
used
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 210 mm -Plating: brass -Tip height: 280 mm -Drawings with the photos -Price: per piece -Number: 1x available -Dimensions: 570/75/H645 mm -Weight: 33 kg
used
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 120 mm -Edition: ball bearings -Hole spacing: 350 mm -Tip height: 210 mm -Drawing with the photos -Dimensions: 395/85/H400 mm -Weight: 14 kg
used
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 140 mm -Plating: brass -lower quill is missing -Tip height: 230 mm -Drawings with the photos -Price: per piece -Number: 1x available -Dimensions: 510/480/H110 mm -Weight: 22 kg
used
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: 130 mm -Plating: brass -Hole spacing: mm -Tip height: 95 mm -Drawings with the photos -Price: per piece -Number: 2x available -Dimensions: 380/350/H110 mm -Weight: 15 kg