We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,305 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
A refurbished extrusion recycling product EREMA Intarema Type 1714 TVEplus for processing polyethylene (PE), polypropylene (PP) and polystyrene (PS), with screen changer, degassing for processing printed films. High up-to-date technical standard. Capacity up to 1,200 kg/h, electrics 220 / 380 V 50 Hz, available at short notice. Auch + Technik e. Kfm. D-73728 Esslingen Phone +49 1577 5329827
used
Pump replacement motor, three-phase electric motor KSB AMA-DRAINER 50-15.1 S-R spare part number: 18090959 shaft diameter: Ø 12 mm flange diameter: Ø 155 mm housing diameter: Ø 122 / 125 mm cable length approx. 10 m replacement motor for KSB submersible pump AMA-DRAINER New ! Dimensions: 310 x 155 x 155 mm Dimensions (box): 430 x 260 x 260 mm
used
Thread Repair Set WÜRTH TIME - SERT Art.-No.: 661 8125 Thread size: M8 x 1.25 Contents: 1x special drill, 1x seat mill, 1x tap, 1x screw-in tool 3 bushings Length: 11.7 mm 25 bushings Length: 14.0 mm as good as new ! dimensions ( transport box ): 240 x 115 x 55 mm
used
Replacement motor for caustic pump, washing machine pump motor, water pump motor HANNING ELEKTROWERKE BE 55 C9 - 008 ( BE55C9-008 ) motor: 170 Watt 230 V 1AC 50 Hz shaft diameter: Ø 5 mm, length: 19 mm, with toothing shaft stump for fan wheel: Diameter: Ø 8 mm, Length: 18 mm used, tested ! Dimensions: 148 x 85 x 94 mm
used
Description: Mostly complete Approx. Onsite Dimension. (l x w x h): 500 x 400 x 70 mm, weight approx.: 10 kg
A used, non-refurbished extrusion recycling brand EREMA Type 1007 TVE for processing polyethylene (PE) and polypropylene (PP), for processing printed films. Fully equipped. The machine is located in a production plant. Power HD-PE 250 -300 kg/h, PE LD and PP300 - 350 kg/h, electrics 240/400 volts, 50 hearts, available at short notice. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827
A used, non-refurbished extrusion recycling brand EREMA Type 1007 TVE for processing polyethylene (PE) and polypropylene (PP), for processing printed films. Fully equipped. The machine is located in a production plant. Power HD-PE 250 -300 kg/h, PE LD and PP300 - 350 kg/h, electrics 240/400 volts, 50 hearts, available at short notice. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827
A used non-refurbished screen changer for an extrusion recycling brand BRITAS. The machine is located in a production plant. Power unknown, probably 300 - 600 kg/h, electrics 240/400 volts, 50 hearts, available at short notice. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827
used
Commemorative coins Democratic Republic of the Congo 25th anniversary of the visit of Pope John Paul II 4x 1 Franc 2004 st, shrink-wrapped, KM156-159
used
Description: Used machines Column drilling machine ALZMETALL AB3 ESV HESSAP lead & draw spindle lathe Cylinder head grinding machine SCLEDUM Honing machine SCLEDUM Lifting platform Nußbaum 2.25 / SL Used & partially reconditioned engines MERCEDES-BENZ 190 E, year of construction 1992 250 D, 605 C 270 CDI - reconditioned 300 D Turbo OM 603 - reconditioned E 290 TD partially overhauled without turbo 300 D OM 606 engine new, without head C 180 engine with head gasket - reconditioned C 200 M271 compressor - overhauled OM 636 - dismantled C 270 CDI complete - dismantled Transporter parts 601 2.3 - engine block, crankshaft etc. E 320 dismantled 280 SE PAGODE M 130 - dismantled. Spare parts MERCEDES-BENZ Used & for repair planned cylinder heads 1 x 611 Cylinder head with camshaftm 1 x 646 Cylinder head with camshafts 13 x M 102 2 x E 420 M119 L&,R 1 x E 300 ...
used
Description: Composed of: N°2 ATOP wireless repeaters, models SW5500 and SW5501 Approx. Onsite Dimension. (l x w x h): 200 x 150 x 160 mm, weight approx.: 5 dimensioni 200 per 150 per 160 kg
used
Key data: 63 mm
We offer you a PURE LOOP extruder for sale that has been completely remanufactured in-house. This machine was put into operation for the first time in 2018 and was taken back by us from the former first owner in the course of an EREMA new machine purchase. The machine is designed for a throughput of up to 180kg per hour and is suitable for PE and PP. If you are interested in this machine, please do not hesitate to contact us!
used
Key data: 80 mm
We offer you an EREMA extruder that has been completely remanufactured in-house for sale. It is an EREMA RGA 80 TE, the machine is completely mechanically and electrically prepared by us before delivery, all components that do not meet our criteria are exchanged for original EREMA spare parts. The machine is designed for a throughput of up to 250-300kg per hour and is suitable for PP. If you are interested in this machine, please do not hesitate to contact us!
used
Key data: 140 mm
We offer you an EREMA extruder that has been completely remanufactured in-house for sale. It is an EREMA INTAREMA® 1714 TVEplus®, the machine is completely mechanically and electrically prepared by us before delivery, all components that do not meet our criteria are exchanged for original EREMA spare parts. The machine is designed for a throughput of up to 1200kg per hour and is suitable for PE as well as PP. If you are interested in this machine, please do not hesitate to contact us!
used
Key data: 140 mm
We offer you an EREMA extruder that has been completely remanufactured in-house for sale. It is an EREMA 1514T, the machine is completely mechanically and electrically prepared by us before delivery, all components that do not meet our criteria are replaced with original EREMA spare parts. The machine is designed for a throughput of up to 1100kg per hour and is suitable for PE as well as PP. If you are interested in this machine, please do not hesitate to contact us!
used
Key data: 50 mm
We offer you an EREMA extruder that has been completely remanufactured in-house for sale. It is an INTAREMA® 605K, the machine is completely mechanically and electrically prepared by us before delivery, all components that do not meet our criteria are replaced with original EREMA spare parts. The machine is designed for a throughput of up to 90kg per hour and is suitable for LDPE. If you are interested in this machine, please do not hesitate to contact us!
used
Boiler capacity: min. 60 l, max. 300 l, total 400 l Total weight: approx. 1800 kg Availability: as of now Condition: functional, well-maintained Operating hours as of 2/22/24: 1016 Electrical values: 400 V, 50 Hz, 26.6 kW Control voltage: DC 24 V
used
Description: Damaged Thread Reaming Bits - Pack of 5 single-stage taps for creating a thread for a new insert - 5 pieces Inserts M5 x 0.8 mm - 25 pieces Inserts M6 x 1.0 mm - 25 pieces M8 x 1.25mm Inserts - Pack of 25 Inserts M10 x 1.5 mm - 25 pieces Inserts M12 x 1.75 mm - 10 pieces Screw buttons with spiral inserts - 5 pieces Punches - 5 pieces Metal case Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 2 kg
used
Description: Expansion force: 10T Working range: 355 mm - 490 mm Drag feed: 130/150 mm Working pressure: 62MPa Oil content: 500 g Weight: 27 kilograms Approx. Onsite Dimension. (l x w x h): 600 x 400 x 200 mm, weight approx.: 20 kg
used
Description: Expansion force: 10T Working range: 355 mm - 490 mm Drag feed: 130/150 mm Working pressure: 62MPa Oil content: 500 g Weight: 27 kilograms Approx. Onsite Dimension. (l x w x h): 600 x 400 x 200 mm, weight approx.: 20 kg
used
Description: Damaged Thread Reaming Bits - Pack of 5 single-stage taps for creating a thread for a new insert - 5 pieces Inserts M5 x 0.8 mm - 25 pieces Inserts M6 x 1.0 mm - 25 pieces M8 x 1.25mm Inserts - Pack of 25 Inserts M10 x 1.5 mm - 25 pieces Inserts M12 x 1.75 mm - 10 pieces Screw buttons with spiral inserts - 5 pieces Punches - 5 pieces Metal case Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 2 kg
used
Description: Damaged Thread Reaming Bits - Pack of 5 single-stage taps for creating a thread for a new insert - 5 pieces Inserts M5 x 0.8 mm - 25 pieces Inserts M6 x 1.0 mm - 25 pieces M8 x 1.25mm Inserts - Pack of 25 Inserts M10 x 1.5 mm - 25 pieces Inserts M12 x 1.75 mm - 10 pieces Screw buttons with spiral inserts - 5 pieces Punches - 5 pieces Metal case Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 2 kg
used
Description: Expansion force: 10T Working range: 355 mm - 490 mm Drag feed: 130/150 mm Working pressure: 62MPa Oil content: 500 g Weight: 27 kilograms Approx. Onsite Dimension. (l x w x h): 600 x 400 x 200 mm, weight approx.: 20 kg
used
This EKAL REP-40-200-3 Bending machine was manufactured in the year 1993 in Germany. It is equipped with an EKAL MT-80 control unit. This is an EKAL pipe end press for forming pipe ends. With this machine, the pipe ends of steel pipes (heavy and light metal pipes) can be automatically widened or tapered using a hydraulic press cylinder.
Force of pressure: 100 t projection: 350 mm table size: 690 x 840 mm Durchfalloch in the table: 160 mm table adjustment: slide area: 450 x 600 mm slide adjustment: 80 mm stroke adjustment: 8-100 mm stroke rate: 60 / min drive motor: 380 V, 5.5 kW space: 1850 x 1850 x 2650 mm weight: 6800 kg
used
spindle diameter: 132 mm x-travel: 2000 mm y-travel: 1350 mm z-travel: 2340 mm table surface area: 2000x1500 mm spindle stroke: 1000 mm turning speeds: 3,5-1000 U/min Radial face slide: 600 mm Radial face slide: 3,5-100 U/min Feed: 2250 mm/min spindle taper ISO: 50 Table load: 15000 kg total power requirement: kW weight of the machine ca.: 24,5 t dimensions of the machine ca.: 6,3x5x3,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
used
new
- PIP Drum Bearing Replacement - HP Part Number CT245-25472 - for HP Indigo Series 2 Machines
new
- Gripper Shaft Replacement - HP Part Number CA292-01520 - for HP Indigo Series 2 Machines
new
- ITM Bearing Front Replacement - HP Part Number CA290-02951 - for HP Indigo Series 2 Machines
new
- ITM Bearing Rear Replacement - HP Part Number CA290-02941 - for HP Indigo Series 2 Machines
used
pressure: 160 t throat: 360 mm stroke: 250 mm total power requirement: 37 kW weight of the machine ca.: 15000 kg dimensions of the machine ca.: 2300 x 1200 x 3350 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
cleaned & checked 220 Volt / 1500 Watt / 50-60 cycles (Hz)
used
labeller PAKLAB | WING REPC FRW60 Year: 2009 Speed: 10.000 bph Direction: Linear Nr. 2 adhesive stations Safety protections
used
CNC vertical machining center SIGMA Leader 5 - Control: iTNC 530 - Usable work surface 1400 x 700 mm - Travel distances: X 1250 mm / Y 810 mm / Z 630 mm - feed speed 40,000 mm/min -El. Handwheel - Heidenhain touch probe - Cooling by the spindle 30 bar -Aspirator - Tool measurement Renishaw (not used) - Rotary table Nikken Ø320 - Magazine with 50 seats FOR REPAIR or OVERHAUL - Motor spindle damage electrical - Control supply unit UV 101B approx. EUR 600,00
used
For sale Dusseldorf pallet straightening and riveting machine, almost new, working in all its parts.
used
Special offer: 6 col 1200 mm Flexotecnica flexopress, special price for quick sale can be shown in operation unwinder rewinder print repeat 300 up to 1200 mm! unwinder diam. 1000 rewinder diam 900 BUT CAN BE EASILY ADAPTED to 1000 mm ( by moving / changing place of the current actuator of the pressing shaft or by changing the actuator for a different one.-information from the printer) electrical drying priinting rolls: 300-6pcs,320-6pcs,340-6pcs,360-pcs,380-6szt, 400-6pcs, 420 -2pcs,440-4pcs,460-6pcs,480-4pcs,500-6pcs,520-4pcs,540-4pcs,560-4pcs,5 80-4pcs,600-6pcs,620-4pcs,650-4pcs,680-pc,700-4pcs,720-4pcs,750-4pcs,8 00-4pcs,850-4pcs,900-2pcs,950-2pcs,1000-2pcs,1050-2,1150-2pcs,1200-2pc s Machine offered subject to unsold Machine offered subject to unsold wide offer of high quality used machines for attractive prices we also buy for stock / warehouses in EU over 20 years o ...
used
Rotary indexing table with 12 stations Automatic ejector three pressing stages Pressure capacity 1,000 KN Stroke 12-120 mm Stroke rate 30-60 1/min Plunger adjustment 80 mm Total weight 9,500 kg
used
pressure: 100 t throat: 350 mm stroke: 8 - 100 mm no. of strokes: 60 Hub/min daylight (stroke down, ram adjustment above): 300 mm ram adjustment: manuell 80 mm table surface area: 850 x 700 mm hole in the table: Dm. 180 mm mm ram surface: 560 x 400 mm ram drills x depth: 40 x 95 mm table height over floor: 850 mm total power requirement: 7,5 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 1,4 x 2,2 x 2,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Pressure capacity: 500KN, stroke: 8-100mm, stroke rate: 100/min. Ram adjustment: 80mm, drive: 4kW, weight: 2850kg. Safety distance: 175mm, overtravel: 53mm, overtravel time: 110ms.
used
PackLab WING REPC FWB60 self-adhesive labelling machine for front & back labelling for cylindrical, oval or rectangular shaped bottles, etc., 2 label applicator type M60 DX 250, label speed 60 m/min., outer diameter of the label reel max. 400 mm, core diameter of the label reel 45-75 mm, label carrier tape with a maximun height of 250 mm, label width from 15 up to 480 mm, maximum label height approx. 245 mm, conveyor width 80 mm, top stabelising belt, press-on belt with a height of approx. 110 mm, electrics 400V/50Hz/3PH, machine floor space approx. 4140 x 3000 mm (LxW), machine height approx. 1900 mm, machine net weight approx. 950 kg
used
pressure: 160 t throat: 440 mm stroke: 20-150 mm : 50 Hub/min : ca. 390 mm : 1300 x 750 mm : 170 mm : 400 / 250 mm : 50 mm : 445 x 560 mm : 7,5 kW : 8 t : 2,9 x 1,5 x 2,8 m total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: Machine number: 4717 Feed size: 500 x 3 mm Belt infeed height (with plate): 170 - 270 mm Additional device: 2-hand operation Table size: 1250 x 900 mm Plunger surface (blue): 800 x 600 mm Projection of ram center dimension stand: 510 mm Installation height center dimension (without plate): 500 mm Clamping plate thickness: 125 mm Trunnion Ø: 65 mm Smallest / largest stroke: 27 - 140 mm Number of strokes: 48 With electronic roller feed: Wanzke WVS 500 Indramat control system, serial no. 102414-1, year of manufacture 1998 With reel straightener: PBK RMC4 80/7/50 RSD GLST, serial no. BA00967, year of manufacture 2006 With minimum quantity lubrication: , Schmidt System 2000 Max. pressing force: 250 to, weight approx.: 10,000 kg, Approx. Onsite Dimension. (l x w x h): 2,250 x 3,200 x 3,500 mm
new
CNC – controlled profile and tube bending machine for demanding and precise bending work with hollow sections and tubes. With our machines, aluminium – steel / stainless steel – various plastics such as PVC window profiles (depending on the application) can be bent with repeatable accuracy, regardless of the material. Depending on the equipment, our machines can also be used for three-dimensional bending work. Our REPANDUS models can work both horizontally and vertically. The models of the REPANDUS series work with a fixed upper roller and two movable lower rollers – this means that the straight end piece is relatively short compared to machine concepts with fixed lower rollers. The machine body is made of vibration-absorbing cast steel Shaft diameter of upper and lower rollers Ø 70 mm Shafts made of special steel – hardened and ground Bending force 190 kN Maximu ...
new
CNC – controlled profile and tube bending machine for demanding and precise bending work with hollow sections and tubes. With our machines, aluminium – steel / stainless steel – various plastics such as PVC window profiles (depending on the application) can be bent with repeatable accuracy, regardless of the material. Depending on the equipment, our machines can also be used for three-dimensional bending work. Our REPANDUS models can work both horizontally and vertically. The models of the REPANDUS series work with a fixed upper roller and two movable lower rollers – this means that the straight end piece is relatively short compared to machine concepts with fixed lower rollers. The machine body is made of vibration-absorbing cast steel Shaft diameter of upper and lower rollers Ø 70 mm Shafts made of special steel – hardened and ground Bending force 190 kN Maximu ...
used
pressure:100 t throat:350 mm stroke:6 - 100 mm no. of strokes:60 /min distance table/ram, max. stroke up, adjustment up:400 mm table surface area:850 x 700 mm hole in the table:470 x 150 mm table height over floor:855 mm ram surface:450 x 300 mm ram adjustment:80 mm power requirement:7,5 kW weight:5,0 t dimensions (WxDxH):1,5 x 2,3 x 2,6 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:mechanical
used
Pressure:080 t throat:300 mm stroke:8 - 100 mm no. of strokes:60 /min distance table/ram, max. stroke up, adjustment up:440 mm table surface area:720 x 600 mm hole in the table:300 x 175 mm table height over floor:860 mm ram surface:400 x 270 mm ram adjustment:60 mm power requirement:7,5 kW weight:6,0 t dimensions (WxDxH):1,3 x 2,2 x 3,05 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:hydraulic, Ortlinghaus overload protection in ram:hydraulic ram adjustment:motoric ram counterbalance:pneumatic
used
pressure:160 t throat:690 mm stroke:8 - 180 mm no. of strokes:50 /min distance table/ram, max. stroke up, adjustment up:500 mm table surface area:1300 x 1000 mm hole in the table:400 / 120 mm table height over floor:850 mm passage to the back:900 mm ram surface:1000 x 700 mm ram adjustment:130 mm power requirement:11,0 kW weight:19,0 t dimensions (WxDxH):2,4 x 2,8 x 3,4 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic ram adjustment:motoric ram counterbalance:pneumatic
used
Available in stock 1 x Used Vicarb Heat Exchanger, model V45. Plates are stainless steel AISI 316. Frames are mild steel, painted. The equipment is used but in good working conditons. REP : 708 kW A MAXI: 165 mm A MINI: 159 mm Dimensions: 50cm x 53cm x 165cm (WxLxH) Weight: 540 kg