rep used for sale

High pressure cleaner PTC Easypower L E similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet - Operating pressure: 400 or 500 bar - Foerder quantity: 38 or 30 l/min. - Motor: Electric 63A, 3Ph-400V-50Hz 40HP/30kW, 1450 rpm or electric 63A, 3Ph-440V-60Hz 40hp/30kW, 1750 rpm - Dimensions: 1,370 x 850 x 1,030 mm - Empty weight: approx. 280 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with industrial wheels - Ergonomic handles for easier maneuverability - Industrial low-voltage supply (24V) and control unit with star-triangle starter and 10 m. power cable - Safety switch with thermomagnetic relay for motor protection - 4 industrial wheels - Direct water suction by self-priming pump - Stainless steel relief v ...

ochdruckcleaner PTC Easypower E similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet , Kärcher, Dibo, ... - Operating pressure: 300-700 bar - Foerder quantity: 15-30 l/min. - Motor: Electric 32A/63A, 3Ph-400V-50Hz 20-30HP/15-22.5kW, 1450 rpm / 1750 rpm - Dimensions: 1,000 x 750 x 850 mm - Kerb weight: approx. 180/210 kg - High pressure pump: Comet three-plunger pump with ceramic plungers - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with industrial wheels - Ergonomic handles for easier maneuverability - Industrial low-voltage power supply (24V) and control unit with star-triangle starter - Safety switch with thermomagnetic relay for motor protection - Operating hour counter - 4 industrial wheels 320 mm - Direct water suction by self-priming pump - Stainless steel relief v ...

Manufacturer: AHT Model: PARIS 210 (-)/(U) used Cooling: +3C to +15C Freezer: -18C to -23C Refrigerant: R290 Special feature: Plug-in ready The chests are completely overhauled, i.e. cleaned, the defective parts are replaced with original AHT parts, bows of the outer skin are spat on and reglued 3-sided. After that, they are repackaged in a transport-friendly manner. Also available from us: used AHT Paris/Miami /Athens

Cerutti coating machine for Paper, films and Aluminium Description: Rotogravure press for papers coating. Technology: water based. The eventual coating of aluminium and plastic films should be verified whether in compliance with the existing driving rollers. We can provide an appropriate technology, up-to-date with the latest electronic and process control systems. Below some sectors of application: -Films coating to improve both the technical and physical properties of the product (Barrier effect) as well as its printability after the film extrusion. -Paper coating pre and post vacuum metallisation Process description: The substrate is placed on the unwinder and driven to the coating units, which may change, based on the rheology of the lacquers in use. Successively the coated substrate enters the dryer, which provides for the vehicle evaporation (water). This process is repeated in lin ...

oven 850 t max 800 C with air circulation inner dimensions 1x1x2m (possible various size) PLC Herdwage n Glühöfen Kammerschmiedeöfen Wärmebehandlungskammeröfen Wärmebehandlungs Kammeröfen für ALU-Blechcoils Wärmebehandlungs Schachtöfen Haubenöfen Härten Anlassen bei niedriger und hoher Temperatur Glühen Normalglühen Austenitisieren Spannungsfreiglühen Vorwärmen vor dem Schmieden Rollenherdöfen Kontinuierliche Öfen für die Wärmebehandlung von Nichteisenmetallbändern Anlage für Wärmebehandlung von Wagenfahrgestellgüsse Öfen für die Wärmebehandlung von Transformatorblech Warmrundlaufprüfanlagen Öfen für Feuerwiderstandsprüfungen Hubbalken und Hubherdöfen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce ber ...

oven 700 Uterna Europe 80KW 700 Celsius Ziel des Spannungsarmglühens schoenheider ist die Reduzierung von Eigenspannungen im Material. Solche Spannungen entstehen zum Beispiel durch Gefügeumwandlungen, Kaltverformung und durch spanende Bearbeitung. Wichtig für ein gutes Ergebnis ist nicht nur die richtige buerstlein Temperatur, sondern auch eine umsichtige Abkühlung. Nur so lässt sich eine erneute Spannungsbildung vermeiden. Typischerweise findet das Spannungsarmglühen bei Temperaturen um 600 °C (bei zuvor vergüteten Bauteilen jedoch 30-50 °C unter der letzten Anlasstemperatur) statt. Die Wärmebehandlung ist das häufigste Veredelungsverfahren, mit dem die Eigenschaften der Stähle gezielt verändert und ihre optimalen Gebrauchseigenschaften für den jeweiligen Einsatzzweck herbeigeführt werden. Erst durch eine der Stahlzusammensetzung, dem Verwendungszweck und der Baut ...

Manufacturer: AHT Model: PARIS 250 (-)/(U) used Cool: + 3°C to + 15°C Deep freezing:-18°C to-23°C Refrigerant: R290 Special feature: Tailer-ready The chests are completely overhauled, i.e. cleaned, the defective parts are replaced with original AHT parts, exploits of the outer skin are sped and 3-sided re-glued. After that, they are repackaged in a transport manner.

P176 - 8x used approx. 30 m³ / 30,000 litres polyester tanks / GRP tanks, aboveground, water tanks, slurry tanks. technical details: capacity: approx. 30 m³ / 30,000 litres material: polyester tank / GRP tank, food tank manufacturer: Staffelstein dimensions: Ø approx. 2.4 m x total height approx. 8.4 m Used tanks in good condition, former juice tanks, aboveground storage containers, standing upright. Multiple connections, inlets and outlets, lid at the bottom of the tank body. Tanks will be repainted. The tanks have been emptied and professionally cleaned inside. According to the age traces of use are present. These containers can be used as storage tanks for water and many different media. Price upon request. Transport can be arranged at low cost. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it ...

Cerutti coating machine for Paper, films and Aluminium Rotogravure printing Description: Rotogravure press for papers coating. Technology: water based. The eventual coating of aluminium and plastic films should be verified whether in compliance with the existing driving rollers. We can provide an appropriate technology, up-to-date with the latest electronic and process control systems. Below some sectors of application: -Films coating to improve both the technical and physical properties of the product (Barrier effect) as well as its printability after the film extrusion. -Paper coating pre and post vacuum metallisation Process description: The substrate is placed on the unwinder and driven to the coating units, which may change, based on the rheology of the lacquers in use. Successively the coated substrate enters the dryer, which provides for the vehicle evaporatio ...

Manufacturer: AHT Model: Miami 145 (U) LED used Cool: + 3°C to + 15°C Deep freezing:-18°C to-23°C Refrigerant: R290 Special feature: Tailer-ready The chests are completely overhauled, i.e. cleaned, the defective parts are replaced with original AHT parts, exploits of the outer skin are sped and 3-sided re-glued. After that, they are repackaged in a transport manner.

S20 - used approx. 40 m³ / 40,000 litres steel tank, double-walled, coated inside, incl. 2 bases, dome shaft, railing and ladder. technical details: capacity: approx. 40 m³ / 40,000 litres material: steel tank double-walled DIN6616/2 weight: approx. 7 t dimensions: approx. Ø 2.50 m x 8.70 m long Includes 2 bases, a prefabricated dome shaft made of steel in accordance with DIN 6626 as well as a railing and ladder, as shown in the pictures. The dome shaft, the railing and the ladder had to be dismantled for transport and cut off at the top, but are included in the delivery. The customer has to refit and weld these attachments himself on site. Upon request and at additional cost we can also supply a propeller agitator. Used steel storage tank in very good condition, outside painted in silver, coating on the inside, former glycol tank, with 2 dome shafts and connection ...

MWM TCG 2020 V12 CHP unit used It is a complete, used CHP unit (motor + generator + basic frame). specifications: Gas application: Biogas Mileage: approx. 60,000 Bh Condition: E70 due Year of construction: 2014 Power: 1200 KW The unit was expanded to run in 06/2021. Please contact us for a written offer. We also have other aggregates and replacement engines, as well as AT cylinder heads, turbochargers, spare parts and other components in stock. Further information on the scope and execution can be found on our homepage buecker-essing.de Installation, installation and service around engine and CHP optionally possible.

UVV maintenance according to BG guideline BGR 500 Pradler Maschinen Service & Electrical Engineering Recognised maintenance technician On-site inspection , Test report Creation , Sealing Occupational safety (trailing measurement safety distance ) Operational safety according to DGUV regulation 3

30 cm image amplifier with 2 x magnifying glass function 100 Hz double monitor, Black Vision, 250 Image Memory Usb DFP, DAP Resolution 1.2 - 1.4 Lp/mm X-ray emitter scan replaced in 2019 Refurbished

Mfc.: Hitachi Type: 6-Hi reversing mill Built: 1976 Shut down: 2014 Revamped: 2010 Control system – changed DC to AC motors Load cells were replaced in March 2005 & thickness gauge in March 2009 Roll coolant cooler was replaced in July 2009 Control boards of hydraulic screw down & electromagnetic valves were replaced in 2009. Strip width: 610 – 1330 mm Thickness Entry: 1.6-4.5 mm Exit: 0.15 – 2.3 mm

AMOB MAH 60/3 Section: 20 cm ³ Power: 5.5 kW - 7 hp Rpm: 11 rpm Ø instrument: 170/108 mm Ø shaft: 55/55 mm Weight: 600 kg Dimensions: 1300x890x1550 mm Nr. 3 motorized rollers hydraulic adjustment top roller Side guide rollers Programmable and displayed top roller Horizontal and vertical working position Pedal with safety device start/stop General information: The AMOB MAH series top roll profile hydraulic bending machines are the backbone of the widest selection of profile curves in the world. The MAH series is perfect for those applications that require multiple passes, where repeatability is paramount. Motorized 3-roller machines are suitable for narrower spokes and minimize material marking. Both horizontal and vertical working positions ensure that, even in the smallest workspaces, a mah series profiling machine will be placed. T ...

In cooperation with a renowned production company from Germany, we offer: - Production of hydraulic cylinders - - Development - Construction - Manufacturing - Repair Based on your specifications, wishes and/or drawings! Our offer: - Standard cylinders - Double-acting cylinders, e.g. double-acting differential cylinders (with center displacement) in flange design, tensile anchor differential cylinder - Plunger cylinders - Dc cylinder - Support cylinder - Repairs - Special cylinders as desired Bfkf7epr3t - Cylinder parts - Piston rods - Cylinder tubes Contact us, our experts will be happy to advise you!

Capacity: up to 22kg of green coffee per roast (88kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase, 60Hz (other voltages by request) Gas: natural gas/LPG Burner: Probat – direct, modulated Chaff cyclone with a wheeled bin for easy chaff disposal is included with the roaster. A green coffee loader and destoner can also be included. The roaster will undergo a major refurbishing, the process will include: - inspection, sandblasting, cleaning and repairing all of the parts, - installing new insulation, - installing new bearings, - installing a new drum cover, - installing new direct drive motors with speed control on the drum and exhaust fan, - making a new electric cabinet and controls (optional: PLC and touchscreen with automatic roasting and profiling), - installing new cooling bin sheathing, - rebuilding the burner, - building a new c ...

2019 technically overhauled and repainted. - Grinding range of 20 to 400 mm with grinding wheel of 200 mm - up to 450 mm with smaller grinding wheel - Zaehne numbers 20 to 999 - Tooth ahehes 0 to 20 mm - Grinding wheel diameter max. 200 mm - Stroke numbers 40 to 180 - Weight approx. 990 kg - Automatic grinding wheel delivery via electronic preselection; max. removal 4 mm. - Removal sequence according to zaehne number preselection in 0.02 mm increments - Automatic grinding wheels profiling device with automatic. Compensation of removal. - Cycle can be pre-predictable according to zaehne number. - Leaf stuetze - Central lubrication - Accessories - Operating instructions and operator tool

HM saw blade grinding machine Vollmer CHD 250 Suitable for automatic grinding of HM circular saw blades on the chest and back in a tension. All known tooth geometries (flat, alternating, trapezoidal tooth, etc.) can be sanded automatically and in a drain. 2019 technically overhauled and repainted Technical data: Saw blade diameter: 80 - 840 mm Bore diameter: 10 - 220 mm Sheet thickness up to: 14 mm Tooth pitch: 8 - 120 mm Chip angle: - 35° to + 40° Free angle: 5° to 45° Inclined grinding tooth back: 45° Inclined tooth brush: 30° Grinding wheel chest: 200 x 32 mm Grinding wheel back: 125 x 32 mm Dimensions W x D x H: 2295 x 1743 x 2050 mm Weight approx.: approx. 2000 kg Connection value: 400 V / 50 Hz / 5.6 kVA

HM saw blade grinding machine Vollmer CHD 250 Suitable for automatic grinding of HM circular saw blades on the chest and back in a tension. All known tooth geometries (flat, alternating, trapezoidal tooth, etc.) can be sanded automatically and in a drain. 2019 technically overhauled and repainted Technical data: Saw blade diameter: 80 - 840 mm Bore diameter: 10 - 220 mm Sheet thickness up to: 14 mm Tooth pitch: 8 - 120 mm Chip angle: - 35° to + 40° Free angle: 5° to 45° Inclined grinding tooth back: 45° Inclined tooth brush: 30° Grinding wheel chest: 200 x 32 mm Grinding wheel back: 125 x 32 mm Dimensions W x D x H: 2295 x 1743 x 2050 mm Weight approx.: approx. 2000 kg Connection value: 400 V / 50 Hz / 5.6 kVA

STYRO-CUT 350 Shredder for Polystyrene specifications Motor power: 5.5 kW / 380 V Throughput: approx. 4 m³ / hour (depending on material and sieve) Speed: 2,900/min. Dimensions: W x D x H: 640 mm x 1,500 mm x 2,400 mm Volume reduction: 70 – 80 % Weight: approx. 170 kg Insertion opening: Ø 280 mm Height insertion: 1,600 mm Granulate size: up to 6 mm STYRO-CUT 350 is a device for shredding (granulating) the polystyrene (EPS). The packaging residues, sections are entered into the insertion funnel and the material is automatically sucked in by the device. The material is shredded by the device in a single step, granulated and filled into bags or transported to the silo. The device reduces the volume by 70-80% and thus also reduces the cost of storage and transport. Un contaminated ESP granules can be reused in the production of new products from EPS. The produced granu ...

Suitable for automatic grinding of HM circular saeblades on chest and jerks in one clamping. All known tooth geometries (flat, alternating, trapezoidal tooth, etc.) can be sanded automatically and in one drain. Condition: Completely rebuilt, diameter extended, repainted. Up to the diameter of 1600 mm ! â?¢ Full cladding â?¢ Set-up for central cooling agent connection â?¢ Device for central suction â?¢ Automatic central lubrication â?¢ Grinding wheel holder â?¢ 2 magnetic saege leaf holders â?¢ Centering rings, - huelsen â?¢ Saegeleaf thickness: up to 14 mm

Schmidt Tempo ASG 1400 Saw blade grinding machine up to 1,400 mm Overhauled and repainted â?¢ Saw blade holder of 250 mm with centering bolt 32 mm with hydraulic clamping nut â?¢ 1 pc saw blade support â?¢ 1 set of centering rings â?¢ 1 pc. grinding wheel flange 150 mm diameter, 32 mm bore â?¢ Large halogen lamp, good illumination, reduced heat formation â?¢ New, up-to-date control panel â?¢ Connection to central dust extraction â?¢ Interchangeable wheel scissors with the required interchangeable wheels for common number of teeth

Schmidt Tempo ASG 2000 Saw blade grinding machine up to 2,050 mm technically overhauled and repainted in 2019. Equipment and accessories: â?¢ Saw blade holder of 250 mm with centering bolt 32 mm, hydraulic clamping nut â?¢ 1 pc saw blade support â?¢ Centering rings bore 32 mm, outer diameter as required â?¢ 1 pcs grinding wheel flange 150 mm Diameter, 32 mm bore â?¢ Large working light â?¢ Interchangeable wheel scissors with interchangeable wheels for need. Tooth numbers Technical data: â?¢ Grinding range 315-2050 mm â?¢ Number of teeth 16 - 1000 â?¢ Tooth height 1 - 50 mm â?¢ Saw blade thickness maximum 20 mm â?¢ Stroke numbers continuously 21-126 Z/min â?¢ Connection value approx. 4.5 kW (400V / 50 Hz)

Saw blade grinding machine up to diameter 3,000 mm Model Schmidt Tempo ASG 3000 2019 technically overhauled and repainted â?¢ Grinding range 315-3050 mm â?¢ Number of teeth 16 - 1000 â?¢ Tooth height 1 - 50 mm - saw blade thickness up to 20 mm â?¢ Stroke numbers continuously 21-126 Rpm - Connection value approx. 4.5 kW (400V / 50 Hz) â?¢ Saw blade holder of 550 mm with centering bolt 32 mm with hydraulic clamping nut â?¢ 1 pc saw blade support â?¢ 2 centering rings bore 32 mm outer diameter as required â?¢ 1 pcs grinding wheel flange 150 mm diameter, 32 mm bore â?¢ Large LED light, good illumination, reduced heat formation â?¢ Interchangeable wheel scissors with the interchangeable wheels for common number of teeth Illustrations: Schmidt Tempo ASG 2000.  ...

Saw blade grinding machine Schmidt Tempo ECE 45 2019 technically overhauled CBN deep-cut process For regrinding and for the production of circular saw blades with angular and arched tooth according to tooth shape A, AW, B, BW, and C according to DIN 1840 for circular saw blades from 20 mm to 550 mm. â?¢ Clock and grinding time display â?¢ automatic, motorized central lubrication â?¢ Centering holder with centering bolts 16 mm . . . . . . . . . . . . . . . . . . â?¢ Clamping nut with mech. Clamping force reinforcement â?¢ Saw blade holder â?¢ Preparation for grinding with oil â?¢ Centering rings as needed â?¢ LED machine light â?¢ Program for round grinding â?¢ Reporting light â?¢ Tool set

The Vulcan is Hitacht's fastest metal analyzer with the most advanced display and reporting system. Compared to its predecessor, the m-Pulse, it has been fundamentally redesigned and offers many new possibilities, such as GPS, camera, WiFi and pre-burning function. The operation is functionally oriented to the menu guides, as they are known from smartphones. The operation of the device via the functional touchscreen is correspondingly easy. The equipment offered here comes from our demonstration pool and is only 12 months old, so it is still sold with a used machine warranty.

Model: Gothot 90, Type: JRHH5ARGA Year: 1958 Capacity: 90kg of green coffee per roast (360kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase (other voltages by request) Gas: natural gas/LPG Burner: Gothot - indirect Pneumatic green coffee loader, destoner and cyclone included The roaster will be fully refurbished including: - inspection, sandblasting, cleaning and repairing all of the parts, - installing new insulation, - installing new bearings, - installing new direct drive motors with speed control on the destoner, drum and exhaust fan, - installing new pneumatics, - making a new electric cabinet and controls (optional: PLC and touchscreen with automatic roasting and profiling), - installing new cooling bin sheathing, - repairing the burner (optional: new burner) - new paint - thermal paint on the parts that are exposed to high temperatures and powd ...

Roller spreader for rear mounting, drive via a 12 volt electric motor with overload protection (8 A). Container contents 120 ltr. , cam roller with interchangeable, asymetric cams (suitable for sand, salt and shards or granules)Roll width 125 cm, stirring shaft to prevent lump and bridge formation, low-wear 10-stage scattering volume regulation by adjustable spring bottom with rubber apron. With grating for accident protection and cable remote control (start/stop). Without growers! Scattering length salt approx. 5-6 km, sand approx. 1 km (manufacturer specifications) Built in 2012, unused, technically and visually as new condition, here and there paint somewhat repelled. Other roller spreaders, also trailers, self-loaders, drive hydraulic, PTO shaft or wheel stock. Winter service technology of all kinds, also slingshot spreaders, snow shields, snow blowers, tractors and used compon ...

[ 5000 characters max., no information about the advertiser ] Brand:MODUL Model:ZFWZ 2000/3 Type:Gear Hobbers Year:1981 Location:Czech Republic Specification: Max diameter of gear without tailstock 2100 mm Max diameter of gear with tailstock 1450 mm Max face of gear 1060mm Max module with hobbing head 22 Max/ Min center distance 1240/150 mm Min number of teeth 10 Max pressure angel 45 deg Table dia / number of slots 1800 mm/12 Bore in table / length 600/800 mm Max dia of hob / length 300/330 mm Max weight of workpiece 15000 kg Accessories: Standard milling head Tailstock (no clamping) Set of gear supports (shoes) Set of arbors Set of change gears

Cemax M2 Router X,Y,Z Working Area: 1300x2500x200mm X,Y,Z Traveling Positioning Accuracy: ±0.05mm X,Y,Z Repositioning Accuracy: ±0.05mm Table Surface: Vacuum table Max.Traveling speed: 60000mm/min Max. Working Speed: 25000mm/min X,Y axis transmission: Herion gear rack Z axis transmission: ball screw Reducer: Japan Xinbao reducer Spindle Power: Ronghua 6KW water cooling spindle Drive Motors: Leadshine 850W Servo motor Working Voltage: AC380V/50Hz/3PH Operating System: Ncstudio Control System

BKW - WATER HEAT EXCHANGER Top condition little in use as good as new condition BKW WATER/WATER HEAT EXCHANGER RWT30-1KKP Manufacturer: BKW Kälte-Wärme-Versorgungstechnik GmbH Street: Benzstr. 2 72649 Wolfschlugen Country: Federal Republic of Germany Device name: Water/Water Heat Exchanger Device type: RWT30-1KKP Cooling capacity: 10.0 kW Connections: R3/4" IG Cooling water consumption: approx. 29.0 l/min Min. differential pressure: 2.0 bar operating pressure: 10.0 bar Inlet temperature: 20.0 °C Outlet temperature: 25.0 °C Water inlet temperature: 27.0 °C Water outlet temperature: 25.0 °C pressure loss: 0.6 bar Operating weight: 170 kg Filling capacity of the water tank: 40 liters Pump power (50Hz): 70 / 4.1 l/min / bar Pump power (50Hz): 100 / 3.0 l/min / bar Conveying medium: Water Viscosity: 1.0 mm²/s Operating voltage: 4 ...

BKW WATER/WATER HEAT EXCHANGER RWT30-1KKP Top condition little in use Manufacturer: KÜMA – Apparatebau Gmbh&Co KG Street: Benzstr. 2 72649 Wolfschlugen Country: Federal Republic of Germany Device name: Water/Water Heat Exchanger Device type: RWT30-1KKP Cooling capacity: 10.0 kW Connections: R3/4" IG Cooling water consumption: approx. 29.0 l/min Min. differential pressure: 2.0 bar operating pressure: 10.0 bar Inlet temperature: 20.0 °C Outlet temperature: 25.0 °C Water inlet temperature: 27.0 °C Water outlet temperature: 25.0 °C Weight: 130 kg Filling capacity of the water tank: 40 liters Pump power (50Hz): 70 / 3.4 l/min / bar Pump power (50Hz-60Hz): 100 / 2.5 l/min / bar Conveying medium: Water Viscosity: 1.0 mm²/s Operating voltage: 400 / 50 V / Hz Control voltage: 24 VDC Total electrical connection: 1.3 / 2.5 kW / A Continu ...

Brush machine Hymmen With 3 brushes Brush 1 500 lobe brush for smoothing the surface Brush 2 sisal brush for glossy surfaces Brush 3 soft cleaning brush Working width 1300 mm Feed speed 3 - 20 m/min. With replacement brushes Total dimensions L 2000 mm x W 3000 mm x H 1500 mm

Many thanks for your interest in our machinery, please find below our offer: manufacturer: Walther Trowal Type: polishing machine TT25-E / grinding machine - finisher year: 1989 Volume ca. 25 Liter Speed: ca. 250 U/min electrical: 400 V / 50 Hz, 1,5kw different: - Tops made from polyurethane - Polishing / ball mill / grinding machine - Fresh water and wastewater connection - The machine is mechanically complete. reconditioned, sandblasted and repainted, see pictures - The PU parts have not been replaced Surface grinding system / grinding system for polishing, rounding, deburring, grinding, cleaning, descaling, oil removal, polishing of stamped, cast, formed, forged and sawed parts or machined workpieces, sensitive parts such as jewelry, steel, plastics etc. or massive large parts. We offer this machine in checked/cleaned/painted” condition, without warran ...

BKW WATER/WATER HEAT EXCHANGER RWT10-1KK Top condition little in use BKW WATER/WATER HEAT EXCHANGER RWT10-1KK Manufacturer: BKW Kälte-Wärme-Versorgungstechnik GmbH Street: Benzstr. 2 72649 Wolfschlugen Country: Federal Republic of Germany Device name: Water/Water Heat Exchanger Device type: RWT 10 -1KK Cooling capacity: 6.0 kW Cooling water consumption: approx. 17 l/min Min. differential pressure: 2.0 bar operating pressure: 10.0 bar Inlet temperature: 20.0 °C Outlet temperature: 25.0 °C Water inlet temperature: max. + 30.0 °C Water outlet temperature: max + 35.0 °C pressure loss: 0.6 bar Operating weight: 170 kg Filling capacity of the water tank: approx. 40 litres Pump power (50Hz): 65 / 2.5 l/min / bar Conveying medium: Water Viscosity: 1.0 mm²/s Operating voltage: 400 / 50 V / Hz Control voltage: 24 VDC Total electri ...

Many thanks for your interest in our machinery, please find below our offer: manufacturer: Walther Trowal Type: polishing machine TT25-E / grinding machine - finisher year: 1989 Volume ca. 25 Liter Speed: ca. 250 U/min electrical: 400 V / 50 Hz, 1,5kw different: - Tops made from polyurethane - Polishing / ball mill / grinding machine - Fresh water and wastewater connection - The machine is mechanically complete. reconditioned, sandblasted and repainted, see pictures - The PU parts have not been replaced Surface grinding system / grinding system for polishing, rounding, deburring, grinding, cleaning, descaling, oil removal, polishing of stamped, cast, formed, forged and sawed parts or machined workpieces, sensitive parts such as jewelry, steel, plastics etc. or massive large parts. We offer this machine in checked/cleaned/painted” condition, without warran ...

The profile perforating machine INTESO S3130T was manufactured in 2011 in the Czech Republic. Technical parameters: - Maximum internal diameter of the sheet metal coil: 80 mm - Maximum length of the finished product: 3000 mm Technical data : - screen control panel: SIEMENS - maximum length of profiles: 3000 mm - maximum cross-section of perforated profiles: 120 x 80 mm; fi 80 mm - automatic linear feed - optical sensor for automatic control of the correct length of the part - linear positioning of the hydraulic cylinder stroke - non-deformation perforation technology - the possibility of perforating profiles of various shapes - memory of perforation programs - two-sided perforation (in one operation) and one-sided perforation - automatic lubrication - maximum pressure of the hydraulic press in the line: 147 kN (15 tons) Tool accessories for the INTESO S3130 T punchin ...

Sell an ET feed fully assembled for a Uhlmann packaging machine UPS 1-4 Replacement feed overhauled

Control screening machine from Tripette & Renaud Conical sieve basket V-belt drive, 3 kw Wire covering MW 1.2 With outlet funnel The brushes are not good and should be replaced. Otherwise good condition.

Fuel oil tank, diesel filling station, tank plant, service filling station, steel tank with 100,000 litres capacity - brand new - according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid and is connected to the following Fittings equipped: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is primed on the outside - on untreated sheets. L = approx. 15.80 m - D = 2.90 m - weight approx. 19.0 to. - ex works, freely charged - (For transport reasons, the dome lid sanddowns and fit ...

ELHA 6 Axis Horizontal Machining Center Xpert-K High-Performance Horizontal Machining Center The newly designed DEPO XPERT K horizontal machining centre offers a high degree of flexibility and above-average productivity. Description Horizontal BAZ The 6 axes are individually controllable. The HSK 100 holder makes it possible to clamp large tools and thus process large areas with high chip removal. Installed is a high-performance G30 fork head spindle with hydromechanical clamping system and a hybrid slewing bearing at top speed which allows extremely high speeds to be driven in order to achieve an optimal milling result even with the smallest tools. This fork head is equipped with a fully automated spindle change cycle, which makes it possible to replace the complete spindle in less than an hour. A hydraulic clamping device is installed for clamping components (effective table ...

tank plant, fuel oil tank, service filling station, diesel filling station, steel tank with 50,000 litres capacity - brand new - according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid and is connected to the following Fittings equipped: 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is primed on the outside - on untreated sheets. L = approx. 10.70 m - D = 2.50 m - weight approx. 9.5 to. - ex works, freely charged - We recommend: Above container from the outside sandblast, ...

KAWASAKI YF03N ULTRA HIGH SPEED DELTA ROBOT The Y Series robots are parallel type pick & place robots and offer quality and reliability. Brand Kawasaki Type YF03N Year of construction 2010 Serial number YF0030012 Electrical connection 400 V Total dimensions L 2400 mm Total dimensions W 2350 mm Overall dimensions H 2750 mm Description of the Kawasaki YF03N robot Type Parallel Kinematics Degree of freedom (axes) 4 Maximum payload (kg) 3 Positioning repeatability (mm) 1 ± 0.1 Range of motion (mm) ø1,300 × H500 Weight (kg) 145 Angle repeatability (°) ± 0.1 Cycle time (payload) 2 0.27s (1 kg) 0.45s (3 kg) Other: 400 volts; camera; Software; instructions; components; Iron frame, with control cabinet; 2x connection cable 5-pin; Control panel E40E-A003

Spiral kneader Boku SK 240 A Basic overhaul basic refurbished spiral kneader Boku type SP 240 A with digital Steuerung.Es are 2 boilers in stainless steel with trolley. The kneader is suitable for a maximum of 240 kg of dough or for a maximum of 150 kg of flour.The machine has 2 speeds (slow and fast) and 2 Mixing time zones. Optionally, you can get the machine with a tipper and up to 4 boilers. Type: SK 240 AS CS for maximum 240kg of dough or for max. 150 kg flour 2 automatic timers 2 courses slow and fast Stainless steel spiral with 2 stainless steel boilers optional lye with up to 4 boilers Machine is overhauled and repainted

We are stocked for CHP Fast with Scania Motor DC12/16 fuselage motors. MIW Engine Repair Plant GmbH North-West Ring 8 D-27404 Zeven/Germany e-mail: info at miw-zeven

Oil-free. Water cooled. Variable speed drive. Volume flow 4.5 - 15.5 m3/min. at 7.0 bar. With built-in compressed air refrigerant adsorption dryer. HP air end 1x replaced. With energy recovery.

Fanuc LR Mate 100i High Speed Robot with Control It is a five-axis, modular, electrically servo-driven robot designed for loading and unloading precision machines, welding and material transport. Its hollow joint construction encloses the entire cable routing to avoid getting stuck. The FANUC LR Mate 100i also features brushless AC servo motors that minimize motor maintenance, sealed bearings and drives enable operation in harsh factory environments. Included in delivery is the control unit Mate RJ-2 Robot Specifications Axles: 5 Payload: 3kg H-reach: 620 mm Repeatability: ±0.04 mm Robot mass:32kg Movement speed of the robot J1 180 °/s (3.14 rad/s) J2 180 °/s (3.14 rad/s) J3 225 °/s (3.93 rad/s) J4 216 °/s (3.77 rad/s) J5272 °/s (4.75 rad/s) Robot Motion Range Robot J1 ±160° J2 +150° - 35° J3 +206° - 159° J4 ±120° J5 ±200° (Changes and e ...

Stable production machine, peak width 1000mm Peak height 180mm Grinding wheel diameter 500 mm ready for use. We specialize in the revision of grinding machines, and offer service, maintenance, repair, conversion and control modernization.