127,387 used machines on RESALE, but how to find them? Machine Search
; Gross weight [kg]: 4830; Registration Number: 1; Engine: Cummins 6ZTAA13-G4; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 800
; Gross weight [kg]: 2350; Engine: 200; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 63A - 32A; Water Tank Volume [l]: 224
; Gross weight [kg]: 1520; Engine: Cummins 6BTA5.9-G2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 185
; Gross weight [kg]: 1430; Engine: Cummins 6BT5.9-G1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 185
Key data: 1600 mm, 3500 mm, 800 mm
For sale is: 1 Piece Used Face and Lace Lathe Manufacturer: Werkzeugmaschinenfabrik Zerbst GmbH Type: DP1 / S3 x 3500 Year of manufacture: 1994 Technical data: Largest turning diameter over bed: 1,600mm Center width: 3,500mm Spindle bore: 100mm Face plate diameter: 1,250mm Total mass of the machine: approx. 24.8t incl. documentation Further pictures and videos can be sent on request. The following things have been renewed/repaired on the machine in the last four years: At the end of 2022, the tailstock was completely overhauled. New bearing and new tip and lubrication. 2024 Cross Support regenerated. Refurbishment of the wedge strips with new sliding coating, snatchers on the guideways smoothed by scraping, Bearing seats of the spindles made smooth, wedge strips in the contact surface and covering surface scraped. Lubrication pump cle ...
; Gross weight [kg]: 1005; Engine: Kubota V3300-TE2BG2; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 140
; Gross weight [kg]: 730; Engine: Kubota V2403-M-DI-BG; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 110
; Gross weight [kg]: 3621; Registration Number: 1; Engine: Cummins 6CTAA9.5-G1; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 640
; Gross weight [kg]: 18000; Engine: Baudouin 12M26 G1000/5; Accessories: Tanker, Battery, Control Panel, Stahldach, Fuel tank available but capacity unknown., 40FT dimensions with twistlocks
; Gross weight [kg]: 3400; Engine: Cummins QSL9-G7; Accessories: Tanker, Battery, Control Panel, Stahldach, Incl. Coolant Heater and Battery Charger; Water Tank Volume [l]: 995
; Gross weight [kg]: 2760; Engine: Rehlko KD83L06T-AA56B; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger; Water Tank Volume [l]: 344
Approved for HVO use; Gross weight [kg]: 1490; Engine: Rehlko KD39L04T-AA56; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: cooland heater and battery charger; Water Tank Volume [l]: 181
; Gross weight [kg]: 14280; Engine: Cummins KTA38-G5; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 1200
; Gross weight [kg]: 8250; Engine: Cummins KTA38-G5; Accessories: Battery, Control Panel, Including : coolant heater and battery charger
Incl. Coolant Heater and Battery Charger; Gross weight [kg]: 3177; Engine: Cummins QSL9-G7; Accessories: Tanker, Battery, Control Panel, Stahldach, Requesting a EUR.1 Certificate is possible for this Generator set., , Warranty:, 1 year for continuous use, 2 years for standby use; Water Tank Volume [l]: 995
Spiraleindrehmaschine - Spiral insertion machine Renz DPST Year 1979 - Serial-No. 4015 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
; Gross weight [kg]: 1055; Engine: Perkins 1103A-33TG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 87
; Gross weight [kg]: 1102; Engine: Cummins 4BT3.9-G2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55
; Gross weight [kg]: 1072; Engine: Cummins 4B3.9-G12; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55
; Gross weight [kg]: 1215; Engine: Perkins 1104A-44TG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 120
CTP-Mitsubishi - DPX 460 – Platesetter with Rip-Mate PC Year of construction: approx. 2007 incl. software and accessories incl. roll films in their original packaging For the production of ready-to-print die-cut polyester printing plates Mitsubishi SILVER DIGIPLATE Suitable for the following printing presses: For Heidelberg QM 46, GTO 46, GTO 52 For Ryobi 5xx For Roland Edelmann Practica 400x510mm For Heidelberg Speedmaster SM 52 – PM 52 2x Supply Rolls 1x integrated register punch for PM52- SM52- Autoplate
current capacity: kVA throat: mm contact pressure capacity: kp volume capacity: Punching capacity: kN punching cross-cut in cmm: stroke: mm weight of the machine ca.: 170 kg dimensions: 1200 x 900 x 1350 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 25 mm throat: 210 mm : total power requirement: kW weight of the machine ca.: 0.085 t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 1650 mm turning diameter over slide rest: 1200 mm turning length: 7500 mm turning dia. in gap: 2500 mm spindle diameter: 105 mm speed: 3,55 - 180 (x24) U/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 4000 mm turning diameter over slide rest: . mm turning length: 5000 mm total power requirement: 30 kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Three-phase motor, electric motor -Power: 1.1/1.6 kW -Speed: 1400/2800 rpm -Shaft: Ø 25 mm -Construction: B3 -Protection class: - -Dimensions: 350/290/H260 mm -Weight: 42 kg
Gear motor, electric motor -Speed: 37/74 rpm -Power: 0.2/0.4 kW -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: IP 65 -Price: per piece -Number: 1x available -Dimensions: 345/200/H185 mm -Weight: 14 kg
Gear motor, electric motor -Speed: 32/65 rpm -Power: 0.2/0.4 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Price: per piece -Number: 5x available -Dimensions: 560/250/H220 mm -Weight: 32 kg
Gear motor, electric motor -Speed: 127/254 rpm -Power: 0.55/0.9 kW -Construction: B3 -1x shaft diameter: Ø 25 mm -3x shaft diameter: Ø 24 mm -Protection class: IP 54 -Number: 4x engines available -Price: per piece -Dimensions: 560/270/H240 mm -Weight: 43 kg
Gear motor, electric motor, three-phase motor -Speed: 13/80 rpm -Power: 0.063/0.4 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 65 -Brake -Dimensions: 570/240/H200 mm -Weight piece: 37 kg
Gear motor, electric motor -Speed: 32.5/65 rpm -Power: 0.18/0.36 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Number: 2x motors available -Price: per piece -Dimensions: -Weight: 22.2 kg
Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 103/420 rpm -Power: 0.36/1.4 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 65 -Brake -Number: 1x motors available -Price: per piece -Dimensions: 580/320/H220 mm -Weight: 42 kg
Gear motor, electric motor, electric gear motor, gear motor for stop, three-phase motor -Speed: 32/196 rpm -Power: 0.16/1.0 kW -Construction: B5 angle -Diameter shaft: 35 mm -Protection class: IP 54 -Dimensions: 560/310/H180 mm -Weight: 46 kg
1. Process Engineering Equipment - VA VA-02. Glycol Regeneration System (C 612) 2 double-tank systems, type DPC160-27/5.0/35k/A, built in 1991 Fully functional, cleaned, skid-mounted system - complete unit Manufacturer: Klöpper Therm Dortmund Unterste Wilms Str. 21 44143 Dortmund Tanks: Dillinger Steel Construction Technical Data: Each system consists of 2 tanks – sheet steel construction, diameter approx. 0.88m; length approx. 5.60m; weight per tank approx. 2.80 t; volume per system approx. 4700 l; Motors: SCHORCH KE 9132 M BA014-7; 6.8 kW; 380/660 V; 13.6A; 14400/min; SCHORCH KE3160C-HB012-Z; 5.5/7.5 kW; built in 1991; 380 V; 13.4/14.4 A; 720/14400/min; Find more here - / Contact us at -
Single sided postforming edge processing machine Brand: WEHRMANN Type: Combima DPF New with 12 months warranty Example with typical equipment; almost each equipment is possible. Please discuss your requirements with us Technical data: Machine control: BECKHOFF route control with 15? Touch-Screen for pre-selection of units and for saving programs. The workpiece transport via precision roller chain R75 with height adjustable top pressure. Feed speed: max. V=6-30 m/min. frequency controlled drive, Top pressure: Motorical height adjustment via axis adjustment in program Right hand site equipped with 1 unit, width adjustment via NC axis: 1 Pre-milling unit With 1 motor with vertical shaft, 400 V, 12,5 KW, 100 Hz, 6000 rpm. Motor shaft Hydro D40 Swivable 90 - 180 degrees, move in/out for use Left hand site Seite: 1 Infeed fence Infee ...
DC motor, servo motor, gear motor, electric motor, DC gear motor, DC shunt gear motor -Manufacturer: SEM, DC gear motor -Type: DPM30E4 -Voltage: 36 V -Speed: 70 rpm -technical data: see photo type plate -Shaft: Ø 30 x 50 mm -Dimensions: 430/150/H130mm -Weight: 14.3 kg
Sealing insert, Seal -Manufacturer: DOYMA, Curaflex sealing insert A unused Ovp -Type: A DPS DN 150, for 86.0 - 94.0 GGV / EPDM -Article No.: 101009015000 -Nominal diameter: DN 150 for 86 - 94 mm -Quantity: 1x insert available -Dimensions: Ø 150 x 44 mm -Weight: 1.3 kg
Fan, ventilator, blower, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, axial fan, suction fan, axial high-performance fan, duct fan -Manufacturer: Sunon, axial fan type DP209WR -Voltage: 220/240 VAC -Number: 1x fan available -Dimensions: 120/120/H40 mm -Weight: 0.5 kg
fiber optic measuring amplifier, fiber optic sensor, fiber optic cable sensor, universal reflex sensor, reflex sensor, fiber optic amplifier -Manufacturer: ifm, efector200 photoelectric sensor fiber optic amplifier OVP -Type: OU5002 OUF-DPKG -Dimensions box: 150/125/H30 mm -Weight: 0.1 kg
Triblock (rinser-filler-capper), pressure filler, isobaric, with vacuum pump pre-evacuation, manufacturer: Eurostar Italy, type Uniblock MEC ISO DPS 12-12-1C, 12 rinser nozzles, 12 filling valves, 1 head crown cap, year of construction: 2005, with height adjustment, set up to currently 330 ml with 26 mm crown corks. 2,500 bottles / hour Tribloc (Rinser-Filler-Crowner), counter pressure, isobaric, with vacuum pump, pre-evacuation, Made by: Eurostar Italy, Type: Uniblock MEC ISO DPS 12-12-1C, 12 head rinser nozzles , 12 filling valves, 1 head crown corker, Year: 2005, with hight adjustment, adjusted to bottle 330ml 0,33 l, 33cl mm with 26 mm crown cork. 2,500 BPH
Roofing nails, strip nails, nail strips, roofing nail rolls, coil roofing nails -Roofing nails: Nail rolls, 2 partially used cartons/total approx. 10,000 pieces -Type: DPN 31x22 FV Hot-dip galvanized -Price/Sale: complete -Dimensions: 470/280/H240 mm -Total weight: 17.1 kg
Position computer, computer, control unit, robot controller, controller, CNC controller -Manufacturer: Nucleus, Industrial PC DP3 ECO -Item No.: FE11002 -Number: 10x industrial PCs available -Price/Distribution: per piece -Transport dimensions: 200/115/H50 mm -Weight: 0.6 kg/pc.
; Power [PS]: 24; Gross weight [kg]: 650; Engine: Perkins 404J-22G; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets:, - CEE 32A - 400V - 5P, , You can also order this Generator with a Leroy Somer or Stamford Alternator., Prices when changing Generator options may differ from the price online.; Water Tank Volume [l]: 70
; Power [PS]: 24; Gross weight [kg]: 630; Engine: Yanmar 4TNV88-22G; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets: , - CEE 32A - 400V - 5P, , You can also order this Generator with a Leroy Somer or Stamford Alternator. , Prices when changing Generator options may differ from the price online.; Water Tank Volume [l]: 70
Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, Crane remote control switch without cable -Type: DSK3 DP2 -Transport dimensions: 500/90/H120 mm -Weight: 0.8 kg
Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, Crane remote control switch without cable -Type: DSK3 DP1 -Transport dimensions: 520/26/H145 mm -Weight: 1.7 kg
CNC Milling machine PMER type DPM Travel X: 780 mm Travel Y: 410 mm Travel Z: 550 mm Numerical Command ANILAM type 5000 M Cone: ISO 40 Spindle exit: 120 mm (manual) Spindle speed: from 70 to 3800 RPM Table size: 1270 x 320 mm Year of construction: 2004 Maxi distance spindle nose/table: 500 mm Mini distance spindle nose/table: 100 mm Swivel head right/left Jog crank Possibility to work manually (with cranks) or driven by the CN Lubricant pump Voltage: 380 V Width: 1900 mm Depth: 2100 mm Total height: 2500 mm Weight: 2,5 T
liter capacity: 980 l Pressure of pump: 8 / 20 bar total power requirement: - kW weight of the machine ca.: 560 kg dimensions of the machine ca.: 2,3 x 2,0 x 1,8 m Coolant System MAYFRAM - BFU 980 /S/20+/8 - NEW, unused - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 2 - Pump capacity: 4.0 kW, 2,917 rpm, 5.8 m³, 96.6 l/min, pressure 25 bar, max. temperature 90°C -.- kW, 2,864 rpm, 2.0 m³/h, 33.3 l/min, pressure 25 bar, max. temperature 90°C The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
liter capacity: 980 l Pressure of pump: 8 / 20 bar total power requirement: - kW weight of the machine ca.: 560 kg dimensions of the machine ca.: 2,3 x 2,0 x 1,8 m Coolant System MAYFRAM - DPF400-V980 SKD (BFU 980 /S/20+/8) - NEW, unused - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 3 - Pump capacity: 4.0 kW, 2,917 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temp. 90°C 3.0 kW, 3,514 rpm, 20.5 m³/h, 341.66 l/min, pressure 25 bar, max. temp. 90°C -.- kW, 2,864 rpm, 2.0 m³/h, 33.3 l/min, pressure 25 bar, max. temp. 90°C The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
