refrigerator used for sale

Mobile laboratory refrigerator (+1 / +8 °C). Incl. grating and lattice rail. Refrigerator is as good as new. Mobile Laboratory Refrigerators (+1 / +8 °C). Incl. grating and grating rail. Refrigerator is as good as new.

Incubator/ refrigerator,stainless steel,Memmert type ICP 400,0-60° C.

Laboratory refrigerator Liebherr LCexv 4010, combination device, explosion-proof interior in accordance with the ATEX directive for the storage of explosive and highly flammable substances. Electronic temperature control with 0.1°C temperature display to the degree enables the most accurate temperature settings Built-in data storage with AlarmLog Two independent regulators and two compressors for optimum functionality and rapid cooling rate after door openings 1-point calibration SmartMonitoring Ready via RS485 interface potential-free alarm contact for connection to central building control centers Access for temperature sensor (Ø 10 mm) Practical drawers (in the freezer compartment) with transparent front for a clear view of the stored goods The doors are self-closing for convenient operation, the door hinge can be changed and the clamp seals are replaceable

Liebherr Commercial Refrigerator Gkv 4360-20 Execution: Cooling Type: Cooling Operating mode: Convection cooling Door hinge: right Door design: solid door Inside white plastic Cleaning procedure Galvanized grates Large capacity SwingLine door with bar handle Replaceable door hinge Replaceable gasket Humidity adjustable Digital Door & Temperature Alarm Automatic defrosting Materials: Material: Stainless Steel Inner material: plastic Replaceable door hinge Climate & Environment: Energy efficiency class: D Energy consumption: 2,031 kWh/24 hours Refrigerant: R 600 a Product Identifications: MPN: GKv 4360 EAN code: 9005382196519 Temperature info: Temperature range: +1°C to +15°C Contents: Volume: 434 ltr Weight info: Weight: 72 kg Device connection: Connected load: 100 Watt Mains voltage: 230 volts Metrics: Length (width): 680 mm Dept ...

Used refrigerator, manufacturer KKT Kraus, model PWT 10, year of construction 2005

Absorption Refrigerator System with cooling tower Karlsruhe KRD 1/12-28-3. Cooling output: 214kW, permissible temperature: 10-60°C, max. overpressure: 1bar, nominal volume flow: 87.1m³/h, with Radial Fan Wolter GmbH TRZ 900/80 KTK and Absorption Chiller Carrier SCS 16LJ-03E-LC.

Brand New Baldwin Refrigerator Automix 229 D-1 With Digital Display

Laboratory refrigerator LKPv 1420 MediLine Dimensions: 216 / 143 / 83 cm

Commercial refrigerator Saro HK 400 Dimensions: 60.00 × 58.50 × 185.00 cm

ISA S.p.A. refrigerator, 6 floors, floor dimensions: 620 mm x 620 mm, total dimensions: 800 mm x 700 mm x 2050 mm.

Side-by-side refrigerator SAMSUNG RS6HA8891B1, S/N 06L34EBW100136P, total volume approx. 614 l, external dimensions approx. 92x177x71t cm, exhibition piece, retail price approx. ? 2.049,- gross

Built-in refrigerator AMICA EKSS 362 220, type BM213BUW#04AN, OVP, VK ? 359,- burtto

Medicine refrigerator SILENTIC, nameplate not to be found, instruction manual, without contents

We offer you here Bros. On the shelf: Dimensions: -L: 2000 mm -B: 500 mm -H: 1780 mm made of stainless steel 4 shelves If you are interested and for more information we are available.

Description: Serial number: 21-101535-10, with freezer compartment, color: white, dimensions: 55 x 55 x 88 cm, probably defective Location: A-040 Vienna Collection: Thursday, April 4th 2024, provided payment deadline is met Approx. Onsite Dimension. (l x w x h): 1,200 x 600 x 800 mm, weight approx.: 30 kg

Gebrauchte Ladentheke / Kühlschrank zu verkaufen. Verhandelbarer Preis

Approx. Onsite Dimension. (l x w x h): 600 x 500 x 850 mm, weight approx.: 40 kg

Description: Internal temperature range +2 to +10 °C Gross capacity 360 l Approx. Onsite Dimension. (l x w x h): 700 x 500 x 1,700 mm, weight approx.: 150 kg

True T-23F-HC Freezer  Original price 4625,- € The True T-23F-HC is a high-quality, energy-efficient commercial refrigerator specifically designed for use in restaurants, cafes, bakeries and other commercial facilities. With a total capacity of 600 liters, this refrigerator offers plenty of space for storing food and beverages. The True T-23F-HC is equipped with an energy-saving and environmentally friendly R290 refrigerant that helps reduce CO2 emissions. The cooling unit is mounted on the back of the refrigerator to ensure maximum usable space inside the unit. The refrigerator has a digital control that allows the user to precisely set and monitor the temperature of the appliance. The interior features sturdy, adjustable shelves that allow for easy cleaning and organization of food. In summary, the True T-23F-HC offers an excellent combination of performance, efficiency ...

00790-2 R&D department for Lithium-ion battery manufacturing will be COMPLETELY dissolved The value of these fixed assets amounted to approximately 7.5 million euros at the time of new acquisition. Manufacturer: Werner Mathis AG Manufacturer: Eirich Gustav GmbH (see also List1 page 6 EL5 Profi-Plus Manufacturer: Robust Habicht Manufacturer: Digatron Manufacturer: Coherent Rofin B.V. Manufacturer: Keyence Inventory name Filling station: Glovebox Braun with scale, cooling unit, etc. Exhaust air scrubber FRIDURIT Neutralization plant FRIATEC Rena Technologies GmbH Lauda Dr. R. Wobser GmbH & Co. KG AFA Glass furnace Ball fall viscometer Solder fume hood Profilometer Battery test system BaSyTec CTS 32 channels CTS 1666 Battery test system BaSyTec CTS 32 channels CTS 1667 Battery test system BaSyTec CTS 32 channels CTS 1668 Vacuum pump Measuring  ...

Refrigerator, showcase of a gas station, plus cooling area as well as deep-freeze area, including shelves Plus refrigerator consists of 4 doors, shelves, evaporator, aggregate. Minus refrigerator, consists of two turns with heating, shelves, aggregate, evaporator

Cool Compact Magnos 650 Refrigerator with Glass Door  Versatile convection refrigerator  excellent for commercial kitchens, restaurants, butchers, bakeries Cool Compact Refrigerator Magnos 650 with Glass Door suitable for use with GN 2/1 containers (grid size 530 x 650) with convection cooling and electronic control inside/outside CNS 18/10 ( also back wall, bottom and cover plate ) Warning by visual and acoustic signal Compressor Protection Function suitable for the tropics - suitable for ambient temperatures up to 43ºC Automatic evaporation of condensation by hot gas Cooling body made of one piece high-pressure foamed self-closing and lockable door, door hinge on the right Evaporator-free interior Drawers with telescopic full-extension extensions made of stainless steel 1.4509 Very stable drawer guide: loadable up to 60 kg Electronic control with 4 top performanc ...

Liebherr FKS 5000 refrigerator Gross capacity: 500l Coolant: R600a with storage rails for 60x40cm sheets for 19 sheets max. ! The previous owner has installed an extra heat air motor at the rear, so that the refrigerator can cool but also warm (proofing cabinet). But we didn't get it in the test! So no guarantee for this! Height: 162cm Width: 76cm Depth:80cm

Description Brand Electra Model V-09 ID 30071 Status Active Price 1.200 € + VAT Year of manufacture 2010 Location Oradea (RO) Display refrigerator Electra V-09 manufactured in 2010. Brut volume: 580 l, display volume: 380 l, compartment volume: 200 l. Refrigerant: R134a (0.600 kg), compressor: Aspera, 450 W, 220 V / 50 Hz. ExWorks. Price is negotiable. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. (+40-740/221.698 ) Hablamos Español. Beszélünk magyarul. (+40-743/177.040 ) Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervam dreptul la greseli, modificari si vanzare prealabila.

Description Brand Frigomeccanica ID 30137 Status Active Price 1.000 € + VAT Location Oradea, Romania Meat display refrigerator Frigomeccanica with lights. ExWorks. Price is negotiable. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. (+40-740/221.698 ) Hablamos Español. Beszélünk magyarul. (+40-743/177.040 ) Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervam dreptul la greseli, modificari si vanzare prealabila.

Used Final View Labels-MHD Control Device No. 2TG024887 Year built: 2010 Out of service since 2016 Device specification: Application (B/h) 36,000 Installation location behind the labeling machine Task: Container insection - underfilling and overfilling Container inspection - safety ring Detection in the labeler - hull label Recognition in the labeler - back label Accessories SPECTRUM refrigerator Follow-up error labeling machine takes stop signal to line MHD control in the labeling machine Messbrück container inspection version left Trigger bridge oblique lysread lid inspection of the retaining ring Discharge signal control One-segment Heuft Pusher Pusher PSH BG0109 The device has been stored properly by the manufacturer

Machine type Pulse-Arc-Inverter-Welding system Make MERKLE Type HighPULSE 284 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 100% ED at 200 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed 4-wheel drive DV 26 Fuse 16 Ampere Dimensions L x W x H 600 x 300 x 565 mm Special accessories Connection for water cooling Weight 33 kg Age 6 months Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welder gloves with cuff 1 piece spare p ...

Gram Refrigerator Type: Baker M 930 CBH 5B Stainless steel for 60x80cm and 60x40cm sheets Year of construction 2010 Coolant: R134a Height: 220cm Width: 80cm Depth: 100cm

Gram SKS Refrigerator with conditions for 8 sheets or more 60x40cm Height: 200cm Width: 81cm Depth: 71cm

SIGMA MISSION 2 vertical machining center with HEIDENAIN 426 control. Fully functional machine, including all its mandrine, DASSI refrigerator. X axis stroke 850 Y 480 Z 580

Refrigerator Eurochiller, model GCA045 Production - Italy. Issue 2008. Working. Volt 400 HZ 50 kw 18.5 A 34 Vaux 24 VI 500 IP 54 Gas R407c Air Condenser 25C Water Process 15C PS Alta/bassa, Hogh/Low Gas 27/22 bar TS Lato alta, High Side -10C/+95C TS lato Bassa, low Side -10C/+55C

Refrigerator Shiny Is in working order. Power 50 kW. 2008 2ca07120007

Thermoformer / heat sealer for product packaging in trays For flexible plastic trays, flexible plastic closure Rebuilt in 2015 With mold for 180 x 125mm trays Includes vacuum pump, and refrigerator DOCUMENTATION AVAILABLE

5 pieces available Refrigerator & freezer Year of construction approx. 2013 Switchable temperature ranges: cooling +4 to +15°C or deep freezing -18 to -23°C Connected loads 230 V / 429 W with electronic temperature display Ready to plug in with interior lighting incl. interior border grille REFRIGERANT - R290 with Auto Defrost Panoramic glass / round glass lid External dimensioning External width in mm 1850 External depth in mm 855 Exterior height in mm 770 Interior dimensioning Interior width in mm 1720 Interior depth in mm 720 Interior height in mm 655 Gross capacity approx. 800l

Miwe fully automatic proofing machine Type: GVA-S Year of construction 2015 digital control Freezer, refrigerator, fermentation room in one Coolant: R404 A for 58x78cm and 60x40cm sheets Stainless steel cladding tested & cleaned Height: 208cm Width: 75cm Depth: 100cm

Miwe fully automatic proofing machine Type: GVA-S Year of construction 2017 digital control Freezer, refrigerator, fermentation room in one Coolant: R404 A for 58x78cm and 60x40cm sheets Stainless steel cladding tested & cleaned Height: 208cm Width: 75cm Depth: 100cm

Plant complete with all the machinery and molds to produce plastic pots, saucers, cages and thermoformed pot holders of various types and sizes: from 40 cm. up to 1 m. Composed of: N1) 135 ton SANDRETTO plastic injection press N1) 135 ton SANDRETTO plastic injection press N1) 200 ton SANDRETTO plastic injection press N1) 300 ton SANDRETTO plastic injection press N1) 400 ton SANDRETTO plastic injection press N1) 5 pallets CAMPETELLA robot + labeller N1) 7 pallets CAMPETELLA robot + labeller N3) automatic stacking and coding lines N2) mold cabinets with drawers with a capacity of 1000 kg N1) refrigerator to cool water N1) freecooler to cool the oil N59) molds for flower pots

Miwe fully automatic proofing machine Type: GVA-S Year of construction 2008a digital control Freezer, refrigerator, fermentation room in one Coolant: R404 A for 58x78cm and 60x40cm sheets Stainless steel cladding tested & cleaned Height: 208cm Width: 75cm Depth: 100cm

Straight Machine, Alcohol Dampening with Technotrans Refrigerator, Quick Action Plate Clamps, Bacher Register, Powder Spray

Perfector 2/2, RCI CCI Comand Table, SAPC Semi Autoplate Change, Rolandmatic Dampening with Technotrans Cooling Refrigerator, Auto-Wash, Roland Mabeg Jet Feeder, Steel Plate on Overlap, Steel Plate on the Lining, Non-Stop Device, Super Blue, Bacher Registry System Quick Bars, Powder Sprayer, High Pile Delivery, Capacity: 15000 Sheets/h, Paper Thickness: 0,04-0,6mm, Max Paper Size: 53x74cm, Min Paper Size: 26x40cm, Start of Print: 9.5-10.5mm, Plate Format: 605x745, Plate Thickness: Max 0,3mm, Standard Accessories)

Perfector 1/5 and 6/0, RCI CCI Comand Table, SAPC Semi Autoplate Change, Rolandmatic Dampening with Technotrans Refrigerator, Auto-Wash, Double Size Impression Cylinders, Roland Mabeg Jet Feeder, Steel Plate on Overlap, High Pile Delivery, Autosize, IR Dryer and UV Dryer, Standard Accessories

Manafacture: SANYO Type: MDFU-442 Capacity: 426 l Refrigerator compartment dimensions: 800 x 900 x 1800 mm Refrigerant: R-134a Weight: 240 kg

Used cold room with storage freezer LILLNORD, type: Combirum C225-600 -In bakery condition- Refrigerator K 225-165 -10°C / +43°C - For 4 to 6 rack trolleys Storage freezer / fermentation interrupter TF 225-435 - 0° / -20°C - for 18 rack trolleys Assembly on request Condition: Very good, ready for immediate use Inspection and test run are possible by arrangement.

Refrigerator, Fabr. Liebherr, Type MRFvc 5501, 544 l

Control cabinet, distribution cabinet, control cabinet, TS modular cabinet, profile door -Profile door KTS for: refrigerator -TS single door: 600 x 2000 RAL 7035 -Article No.: 5050154 -Dimensions: 2040/645/H90 mm -Weight: 33 kg

Control cabinet, distribution cabinet, control cabinet TS modular cabinet, profile door -Profile door KTS for: refrigerator -TS8 1200 x 2200 -Price: per piece -Number: 2 pieces -Dimensions: 2240/680/H280 mm -Weight: 66 kg

Refrigerator Stainless steel for 20 sheets 600 x 800 Digital temperature display from -2 to +8°C EHT energy-saving system Ready to plug in with 20 pairs of support rails Refrigerant R 290/656R A Connection 230V/450Watt Dimensions: 800 x 980 x 2060 mm, WxDxH New device Another 400 bakery machines in stock!

max. sheet length 3000 mm Power 2500W max. sheet width 1500 mm CO₂ type max. sheet thickness 22 mm CNC control Type CNC Mazatrol Preview Passage X 3000mm Y passage 1500 mm max. loading on the table 1000 kg ------------------- Length x Width x Height 8000.0 × 3000.0 × 2000.0 Weight 12100 kg Working hours: Hours connected to electricity 38071 hours Technical condition: good Compliant with CE standards All device manuals Dust collector Refrigerator Resonator in good condition, all service was done on time. Photos of the machine taken on 20/04/2022

Fuji Quartz III 125 Printing Plate Processing Machine; good condition; cleaned and tested; Inlet width 1250mm, min.200mm; Panel length max.1500mm; Refrigerator. Plate processor Fuji Quartz III 125; good condition; cleaned and checked; working width max.1250mm, min.200mm; plate lenght max.1500mm; Chiller.

BYSTRONIC Bystar 3015, 2011 COMPOSITION ByLaser 4400W CO2 resonator (operating hours: 23,790), sheet loader (ByLoader 3015), refrigerator (ER, WKL430), ventilation (Donaldson, DFPRO6-SPRK). Documentation in electronic and paper form. ------------------------------------ SPECIFICATIONS Maximum sheet size, mm: 3000х1500 Positioning Speed, m / min: 80 Repositioning accuracy, mm: 0,05 Types and thicknesses of processed materials: Structural steel, mm - 20 Stainless steel, mm - 12 Aluminum, mm - 8 Copper, mm - 3 ------------------------------------ In the planned work of the enterprise since 2012 - DEMONSTRATION, mid-APRIL 2020. Sold in connection with the upgrade of the equipment of the production site. It is possible to advise the operators / technologists of the buyer before purchasing, as well as help in organizing the installation.