refrigerant used for sale

Compressed air refrigerant dryer Atlas Copco FD 1600 FS 13.00 bar, 96.00 m3/min, Refrigerant R 404a

Refrigerant dryer Kaeser TG 301 FE 16 bar, 30,8 m3/min, Refrigerant R 404a.

Compressor with refrigerant dryer, screw compressor ECOAIR D5 Year: 1993 0,45 m3/min 10 bar 5,5 kW 400 V 3AC refrigerant dryer: INGERSOLL-RAND DryStar DS006SS 0,24 kW 230 V AC used, tested ! Dimensions: 1750 x 900 x 1800 mm

max. 16,0 bar, 65,0 m3/min. Refrigerant R 404a.

max. 10,50 bar, 99,80 m3/min, Refrigerant R 404a, water cooled.

Compressed air refrigerant dryer Kaeser TH 451 16,00 bar, 45,00 m3/min.

Compressed air refrigerant dryer Atlas Copco FD 1000 VSD A 13 bar, 60 m3/min. Variable speed drive. Volume flow 0-60 m3/min.

Compressed air refrigerant dryer Atlas Copco FD 1250 VSD A 13 bar, 75 m3/min. Variable speed drive. Volume flow 0-75 m3/min.

Compressed air refrigerant dryer Hiross PG 0900 12 bar, 90 m3/min.

2 x Atlas Copco refrigerant dryer FD1600WFS 96 m3/min

Refrigerant dryer Kaeser TA 5 YOC 2013 Location: 59425 Unna The article is welcome to be viewed. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at traders, traders and legal entities. Company names and trademarks are the property of their respective owners and are used only to identify and describe the products. The assembly and the electrical connection of the machine / devi ...

Refrigeration compressor, chiller, refrigeration compressor, refrigeration unit, refrigeration compressor, blower, refrigerant muffler, discharge muffler -Manufacturer: UL Refrigeration Research, Discharge Silencer Muffler -Type: RR Muffler 823G -Pressure: up to 450 PSIG / 31 bar -Number: 1x muffler available -Price per piece -Dimensions: Ø 54 x 190 mm -Weight: 0.4 kg/pc.

Refrigerant recovery system, vacuum pump for air conditioners, air conditioners, refrigeration units, differential pressure gauge -For use in: air conditioning systems with recovery, CFC, HFC and HCFC -Dimensions: 300/400/H320 mm -Weight: 19kg

Type: Refrigerant Pressure Dryer Make: Mark Kompressoren Nominal capacity: 1.20 m³/min > under standard conditions: - Operating pressure 7 bar - Operating temperature 35°C - Ambient temperature 25°C - Pressure dew point +3°C) Maximum pressure: 13 bar Connection: G 3/4'' Voltage: 230 V/50 Hz Dimensions LxWxH: 350 x 500 x 450 mm

Description: Technical data: Volume flow rate : 16000 l/min Total working hours: 33658 Working hours until regular maintenance: 4029 Refrigerant : R 134a Rated power: 2,25 kW /5,7 A Max.Working pressure : 16 bars Air connection: 2” Approx. Onsite Dimension. (l x w x h): 929 x 1,101 x 1,510 mm, weight approx.: 328 kg

Specifications: - Operating pressure 16 bar - Inlet capacity up to 1100 m³/h - Refrigerant R 134 A - Drive 400 V / 2.95 kW - Space requirement approx. W 1550 x H 2200 x D 860 mm - Weight approx. 280 kg

Offer 19301 Specifications: - Operating pressure 16 bar - Inlet capacity up to 17 m³/h - Refrigerant R 134 A - Drive 400 V / 2.52 kW - Space requirement approx. W 860 x H 2200 x D 1300 mm - Weight approx. 700 kg

Boretti wine cabinet, refrigerant: R134a, 9 floors, floor dimensions: (9x) 540 mm x 545 mm x 80 mm, total dimensions: 760 mm x 750 mm x 2100 mm.

Kaeltetrockner Kaeser TG 301 FE 16 bar, 30.8 m3 rpm, caelte agent R404a.

Volume flow: 186m³/h, temperature: -10 to 120°C.

Operational pressure: 16bar, Leistung: 5,7kW.

Air pressure: 0.1-1.2Mpa, air pressure: 60°C, weight: 450kg.

Operational pressure: 43bar, connected load: 2.1kW, weight: 185kg, was maintained regularly, an inspection is possible.

double piston compressor system semi-hermetically air-conditioning compressor Compressor Chiller 2 x 18.5 Kw with frequency inverters 2x Semi-hermetic piston compressor Manufacturer: Bock Type: HGX5/830-4 N°: AM18158A014 & AM37155A014 380/420 V; 50 Hz; 3 ph; 1450 rpm. Displacement: 72.20 m3; 19/25 bar Power with cooling conditions and refrigerant R407C: 39.32 kW Power with cooling conditions and refrigerant R404A: 41.27 kW Power with conditions and refrigerant R134a: 31.45 kW 4x Plate heat exchanger Manufacturer: GEA WTT Gmbh Type: WP7M-120 Y.O.M.: 2006 max. Pressure: 30 Bar Temperature: -195/+195 °C Content Page 1: 13.69 Ltr. Content Page 2: 13.92 Ltr. 2x Liquid collector Cat. 2 Manufacturer: FricoMEC Type: RV-300X606 Volume: 35 Ltr. Pressure max:28 bar Temperature: -10/+120 °C 2x Inverter Manufacturer: Fuji Electric Type: FRN18.5F1S-4E 3ph 380/48 ...

Cofely Quantum X060-S2CL-LL chiller 600 kW All Quantum Air models are characterized by maximum efficiency, maximum cooling capacity, convenient control and excellent serviceability. Features of the Quantum Series: Turbo liquid chiller for applications from 250kW to 3MW Oil-free system High operational reliability Low maintenance, low vibration and quiet operation Multi-compressor design Precise control of the recooling process through variable capacity control Highest energy efficiency with excellent performance values (COP) Nominal power: 600 kW Number of compressors : 2 max. heat transfer fluid outlet: 38°C - 50°C min. refrigerant outlet : –5°C - 4°C max. current consumption: 275 A Refrigerant: R134a Capacity: 120kg Refrigerant: Water Refrigerant volume: 71.5 m³/h According to ENGIE, the Quantum chillers can be easily converted to the 513A refriger ...

Technical parameters of the MITSUBISHI ML3015EX S2-45CF-R laser – laser power: 4.5 kW – laser type: CO2 – man-hours: approx. 17,000 h – control: simultaneous 3 axes (X, Y, Z), sensing the height of the Z axis is also possible – maximum dimensions of the element to be processed: 3050 x 1525 mm – weight of the loaded pallet: 950 kg – workpiece support section height: 880 mm – pallet change time: approx. 25 seconds – number of pallets: 2 – X axis feed: 3100 mm – Y axis feed: 1550 mm – Z axis feed: 150 mm – rapid feed (X, Y axis), speed: maximum 100 m / min. (48 in manual mode) – maximum feed speed: 50 m / min. – positioning accuracy: 0.05 / 500 mm (X / Y axis), 0.1 / 100 mm (Z axis) – repeatability: + -0.01 mm (X, Y axis) – machine weight: 10700 kg MITSUBISHI Laser Resonator – reso ...

Dn Solution Nhp 5100 - Continuously controlled 4-axis horizontal CNC machining center Fanuc 31i-model B -apc 2 Stations - racing X730 -60 Random Tool Places - Iso 50 electrospindle with double contact flange, oil cooled, 15000 rpm - Pallet capacity: 500 kg -External air blow Adjustable m” function -Internal refrigerant supply at 70 Bar - preparation of measuring probe for zeroing of piece with Renishaw Rmp60 cycles (radio transmission) -data Server 2gb, Fanuc Aicc 2 Software (High Speed ​​For 3D Molds And Figures, 1ooo Blocks Ahead) -communication with ports and USB + Ethernet - Carpet Chip Conveyor Belt Steering Unit: FANUC 31I-MODEL B X Axis Runs: 730 Y Axis Strokes: 730 Z Axis Strokes: 880 Board length: 500 Board width: 500 Max Piece Dimensions Length x Width x Height Table: D.800x10900 Spindle Table Surface: Tapped Holes Max Piece Spindle Weight: 500 kg  ...

Description: Volume flow m³/min: 0,80 Pressure loss refrigeration dryer bar: 0,15 Electrical power consumption at 100 % vol. : 0,19 Overpressure bar: 3-16 Dimensions W x D x H: 386 x 473 x 440 mm Compressed air connection: G ½ / Condensate drain connection: G ¼ Electrical supply: 230 V / 1 Ph / 50 Hz Mass of refrigerant R-513A: 0.21 kg Mass of refrigerant R-513A as CO2 Equivalent t: 0.13 Hermetic refrigeration circuit is available. - Special cooling air duct / - Powerful refrigerant condenser - High-quality refrigerant compressor / - Strain-relieved condensate line Use up to 50°C ambient temperature! In mint condition ATTENTION: it is expressly noted that this lot only corresponds to the scope of the lot description. If objects can be seen on the photo, which are not explicitly stated in the lot description, they are not part of the sale. Of course, this also applies to tools, addi ...

Heraeus Vötsch Here we offer you a climate test chamber. Water-cooled Housing dimensions: width 2215 x depth 1280 x height 1985 (mm) Rated voltage: 400V, +-10%, 3/N.50Hz Rated power: 12.5 kW Rated current: 19 A Temperature testing Temperature range -70°C to + 180°C Temperature deviation: +- 0.5 K temporally, +- 2 K spatially Cooling speed on average: 2 K/min Heating speed on average: 3 K/min Climatic test Temperature range +10°C to + 90°C Humidity range: 10% to 98% RH Humidity deviation: +- 1% to +- 2% RH (temporal) Temperature deviation: +- 0.3 K temporally, +- 1.0 K spatially Test room volume: 1200 liters Qualified usable space: 695 x 1190 x 750 mm, approx. 620 liters Refrigerant ND R404A Refrigerant HD R23 Water consumption: < 3 litres / 24 hours (at 40 °C and 92 % RH) Type: HC 7120/S For you as a buyer for security the following information! The fol ...

Make and Model: GE WHG-125 Year: 2011 Hours: 6000 approx. Year : 117 HZ : 50/60 Voltage: 400/480 V Scope of supply: Each ORC skid has its own heat exchangers for evaporation and condensing of the refrigerant (working fluid). You would need to install a water heat source and a water cooling circuit, no cooling towers or blowers are included with what we have in storage. Condition: These units have been decommissioned and been in storage since May 2016. Unit 1 and 2 had a report of an MBC fault (magnetic bearing controller). Unit 3 has several parts missing due to a failure in the power electronics. Some parts of the Power electronics, PLC, speed drive for the refrigerant pump are missing. Unit 4 had a failed heat exchanger and filled the ORC with water, would need stripping to determine the full extent of the repairs needed. Extra: These units run on a working fluid (refri ...

YORK YVWA MEME FFBE 0900 SAX Brand:YORK Type:YVWA MEME FFBE 0900 SAX Stock number:M23-4637 Cooling capacity:900 kW Application:Cooling Refrigerant:R513A Refrigerant Content:2x 130 kg Voltage:400 Volts Power consumption:237,5 kW Dimensions:4200 x 1405 x 1825 mm Weight:5926 / 6540 kg Number in stock:3 piece(s) Price:On request Description: New unused water-cooled York water chiller with 2 frequency-controlled screw compressors distributed over 2 cooling circuits. This chiller is equipped with a hybrid falling film evaporator and runs on the new refrigerant R513A. Mentioned capacity at a water temperature of +12/6°C (in/out). Visit our website: used-refrigeration

Manufacturer: FST Type: DFX 18 Year of construction: 2017 Compressed air: 14 bar Minimum temperature compressed air: 14°C Maximum compressed air temperature: 55°C Refrigerant: R134.a 0.42 kg Minmal temperature refrigerant: -10°C Maximum temperature refrigerant: 120°C

Description: KAESER TB 19 Cycling Refrigerated Air Dryer flow rate (m3/min): 2,10 pressure loss, refrigeration dryer (bar): 0,19 elect. power consumption at 100% flow rate (kW): 0,43 elect. power consumption at 50% flow rate (kW): 0,24 compressed air connection (G): 1 condensate drain connection (G): 1⁄4 electrical supply : 230 V/1 Ph/50 Hz Other features : Floating contacts: refrigerant compressor running, high pressure dew point The Kaeser cycling control provides maximum efficiency by operating the refrigerant compressor only when necessary. This is achieved by utilizing a thermal storage medium. The refrigerant system cools the medium to a certain temperature, cuts off and then stands by until the temperature rises to a predetermined level before switching on again. Therefore, the dryer is not wasting energy when the demand is low. A non-cycling dryer continuous to op ...

Governing Unit: ... Axis X Strokes: 1000 Y Axis Runs: 800 Z Axis Strokes: 810 Board Length: 630 Width of Board Table: 630 Max Workpiece Dimensions Length X Width X Height Table: D.1050 X H.1000 Spindle Table Surface: Tapped Holes Max Workpiece Spindle Weight: 1500 Spindle Spindle: 6000 Spindle Spindle taper: ISO 50 Torque Cont 10 Min Spindle: Nm X-Axis Rapid Displacement Rapid Displacement: 60000 Y-Axis Rapid Displacement Rapid Displacement: 60000 Z Axis Rapid Displacement Rapid Displacement: 60000 Number Of Atc Warehouse Tools: 160 Max Tool Diameter Atc Warehouse: 250 Max Tool Length From the Atc Warehouse Reference Line: 630 Atc Magazine Tool Selection Method: Fixed Max Tool Weight Atc Warehouse: 30 Kg Atc Warehouse Tool Change Time: 5 SEC. Refrigerant Pressure: 30 BAR Refrigerant Tank Refrigerant: 500L Height Machine Dimensions: 3300 Width Machine Dimensions:  ...

FRIGOSCANDIA GYROCOMPACT GC42-08-30-06-NS-CCR Product number:M19-5013 Cooling capacity:100 kW Number of fans:1 Fin spacing:25mm - 6mm mm Defrost:Hot gas Refrigerant:NH3 Refrigerant Content:390 kg Voltage:400 Volt Power consumption:25 kW Motor power:30 kW Dimensions:7050 x 2620 x 3900 mm Weight:6500 kg Year:1996 Number in stock:1 piece(s) Price:Quotation request A nice compact Frigoscandia spiral freezer. Model GC 42-08-30-06-NS-NHT-CCR with a product capacity of maximum 1.000 kg/h (based on green peas). In/outfeed configuration is North/South. Infeed height = 560mm, outfeed height = 2540mm. Belt rotation is Counter Clock Wise, belt width gross = 420mm, belt width net = 375mm, max product height = 65mm, numbers of tiers = 30 tiers. Belt mesh width = 6mm. This Frigoscandia spiral freezer has been well maintained and is in top condition. The freezer is executed with a S. ...

BITZER / ALFA LAVAL L7SW1S12PP Product number:M19-4335 Cooling capacity:930 kW Refrigerant:NH3/R717 Refrigerant Content:80 kg Voltage:400 Volt Motor power:250 kW Dimensions:9.000x3.000x2.600 mm Weight:13.500 kg Year:2014 Number in stock:2 piece(s) Price:Quotation request Very nice and young Bitzer water-cooled ammonia water chiller(s) built in a machine-room container with mechanical cooling. This Bitzer chiller consists of a frequency controlled Bitzer screw compressor (brand Danfoss), WEG electric motor 250 kW, horizontal oil separator, oil cooler, combined economiser/liquid separator, Alfa Laval plate heat exchanger evaporator, Alfa Laval plate heat exchanger condenser, Grundfos speed controlled pumps and a control cabinet with Siemens PLC and touch screen. The above mentioned capacity is at +18/12°C in/out and a flow rate of 143,7 m3/h. and a cooling water supply +4 ...

BITZER LHV6/2DES-3.F1Y-40S Brand:BITZER Type:LHV6/2DES-3.F1Y-40S Stock number:M20-1244 Cooling capacity:9 kW Number of fans:2 Displacement:13,4 m³/h Refrigerant:R134a, R407C, R449A, R452A Refrigerant Content:13 l Voltage:230 / 400 Volts Motor power:2,2 kW Dimensions:1400 x 650 x 1400 mm Weight:270 kg Year:2015 New/unused Number in stock:2 piece(s) Price: Quotation request Description: New unused Bitzer inverter condensing unit, complete with controller. Mentioned capacity at an evaporating temperature of -5°C and an ambient temperature of +40°C when using R134a. (When using R452A: Q= 3.7kW at Te= -30°C and Tamb= +40°C). Please visit our website: used-refrigeration

SABROE PAC 163 HR-A Brand:SABROE Type:PAC 163 HR-A Stock number:M21-4474 Cooling capacity:1,437 kW Application:Cooling / Heating Refrigerant:R717 (NH3/Ammonia) Refrigerant Content:175 kg Voltage:400 Volts Power consumption:126 kW Motor power:160 kW Dimensions:5800 x 2660 x 2850 mm Weight:8,800 kg Year:2007 Number in stock:2 piece(s) Price:Quotation request Description: A very well maintained complete Sabroe water-cooled water chiller/heat pump. This water chiller is equipped with a frequency-controlled Sabroe SAB163HR compressor (up to 6,000 RPM), a Schorch 160 kW electric motor, an Alfa Lava evaporator and condenser, a complete control cabinet with a Vacon frequency controller and a Unisab II compressor/chiller controller. All necessary documentation is available. The stated capacity is for water +12/+7°C in/out. Visit also our website: used-refrigeration

HIDROS LDK.070X-1C Brand:HIDROS Type:LDK.070X-1C Stock number:M21-4478 Cooling capacity:64 kW Number of fans:2 Refrigerant:R407C Refrigerant Content:19 kg Voltage:400 Volts Power consumption:42,8 A Dimensions:2650 x 1150 x 1800 mm Weight:930 kg Year:2010 Number in stock:2 piece(s) Price: Quotation request Description: Good air-cooled Hidros water chiller with 2 scroll compressors on 1 circuit. This chiller is equipped with a hydro kit (water pump + expansion vessel) and a Dixell 1PG 100D controller. Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C. (Free Cooling: Q= 43kW, P= 1.4kW at Tw= +15°C / Tambiant = +2°C and 20% Glycol). Visit also our website: used-refrigeration

Product number:M15-4194 Cooling capacity:41,6 kW Number of fans:1 Refrigerant:R407C Refrigerant Content:10 kg Voltage:400 Volt Power consumption:16,5 kW Dimensions:2085 x 1230 x 2300 mm Weight:1013 kg Year:2012 Number in stock:2 piece(s) Very young and good LIEBERT air-cooled water chiller with free cooling capability (28,6 kW). Mentioned capacities are at an ambient temperature of 35°C and at 15/10°C (inlet/outlet) with ethylene glycol 30%. These chillers are equipped with an expansion tank and a water pump. Please visit also our website: used-refrigeration

Air Screw Compressor Atlas Copco GA 160 FF 160 kW, 7.2 bar, 27 m3/min With built-in compressed air refrigerant dryer. Refrigerant R 404a. New mineral oil. New oil separator.

Rotary screw air compressor Atlas Copco GA 160 FF 160 kW, 7,2 bar, 27 m3/min With built-in compressed air refrigerant dryer. Refrigerant R 404a. New mineral oil. New oil separator.

Air Screw Compressor Atlas Copco GA 315 VSD FF 290 kW, 10 bar, 51 m3/min Variable speed drive. Volume flow 13.0 - 51.0 m3/min. With built-in compressed air refrigerant dryer. Refrigerant R 404a. Air end 1x replaced in 2008.

CARRIER 30 RA 040 Brand: CARRIER Type: 30 RA 040 Stock number: M21-4526 Cooling capacity: 39.3 kW Application: Cooling Number of fans: 1 Refrigerant: R407C Refrigerant Content: 10 kg Voltage: 400 Volts Power consumption: 30 A Dimensions: 2100 x 1100 x 1400 mm Weight: 526 kg Year: 1999 Number in stock: 1 piece(s) Price: Quote request Description: Nice air-cooled Carrier chiller with 1 scroll compressor on 1 circuit. This machine is equipped with coated fins, a Pro Dialog Plus controller and a hydromodule (water pump and expansion vessel). Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C. Please visit also our website: used-refrigeration

Rotary screw air compressor Atlas Copco GA 315 VSD FF 290 kW, 10 bar, 51 m3/min Variable speed drive. Volume flow 13.0 – 51,0 m3/Min. With built-in compressed air refrigerant dryer. Refrigerant R 404a. Air end 1x replaced in 2008.

BLUE BOX Epsilon Echos HP 37/ST 1PS Brand:BLUE BOX Type:Epsilon Echos HP 37/ST 1PS Stock number:M21-4507 Cooling capacity:35.6 kW Application:Cooling/Heating Number of fans:2 Refrigerant:R410A Refrigerant Content:9 kg Voltage:400 Volts Power consumption:13 kW Dimensions:1350 x 550 x 2100 mm Weight:460 kg Year:2016 Number in stock:1 piece(s) Price:On request Description: Nice air-cooled Bleu Box chiller/heat pump with 1 Copeland ZP154 scroll compressor on 1 circuit. This machine is equipped with a Carel micro C² SE controller and a hydronic module (water pump, expansion vessel and 140 liter buffer tank). Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C. (Heating capacity: Q= 38.1kW, P= 11.9kW at +40/45°C and +7°C dry bulb, +6°C wet bulb). Please visit also our website: used-refrigeration

GEA GLAC 0152 AC1.SL Brand:GEA Type:GLAC 0152 AC1.SL Stock number:M21-4513 Cooling capacity:34 kW Number of fans:4 Refrigerant:R407C Refrigerant Content:6 + 6 kg Voltage:400 Volts Power consumption:15 kW Dimensions:2000 x 1150 x 1990 mm Weight:850 kg Year:2006 Number in stock:1 piece(s) Price:On request Description: Nice air-cooled Gea chiller with 2 Copeland scroll compressors distributed over 2 circuits. This chiller is equipped with speed-controlled fans, a CVM2 controller and a hydronic module (water pump, expansion vessel and 250 liter buffer tank). Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C. Please visit also our website: used-refrigeration

CIAT LGP 120V Product number:M14-4139 Cooling capacity:34,5 kW Refrigerant:R410A Refrigerant Content:3,3 kg Voltage:400 Volt Dimensions:883x798x1201 mm Weight:240 kg Year:2008 Number in stock:1 piece(s) Price:Quotation request Well maintained Ciat water chiller / heat pump with limited running hours. The heating capacity is 40,5 kW at an water outlet of + 45°C. Please visit also our website: used-refrigeration

Thermotron Temperature Chamber Here we offer you a Thermotron temperature chamber. Water-cooled Thermotron temperature chamber SE-1000-5-5 Dimensions of the working area - WxDxH: 102 x 100 x 97 centimeters Working range volume: 986 liters Temperature uniformity: ± 0.5°C Temperature range: -70ºC to 180ºC Temperature control tolerance: 0.3°C Feed dimensions - WxDxH: 122 x 188 x 218 centimeters Electrical requirements 400/3/50 28.4 A Refrigerant: R-404A / R23 Approx. Weight: 862 kg Type: Thermotron SE- 1000-5-5 For you as a buyer for security the following information! The following points are carried out in advance at our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful verification, the chambers are subjected to a test run, which ...

CIAT LG-LGP 900Z Product number:M18-4309 Cooling capacity:249 kW Refrigerant:R407C Refrigerant Content:12,3 + 13,3 kg Voltage:400 Volt Power consumption:67 kW Dimensions:2200 x 900 x 1700 mm Weight:1223 kg Year:2004 Number in stock:1 piece(s) Price:Quotation request Very nice water cooled Ciat water chiller with 4 scroll compressors distributed over 2 circuits. Mentioned capacity at a water temperature of +12/7°C (inlet/outlet) and an condenser water temperature of +30/35°C (inlet/outlet). Visit also our website: used-refrigeration