We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,934 used machines on RESALE, but how to find them? Machine Search
used
Three Roll Calender Manufacturer: Reed 24inch wide x 12inch diam. Right angle drive Double helical gears Hand nips Lunn Safety Gear Holroyd Gearbox Crompton Parkinson Motor Complete with Starter
Reed 42" x 16" Two Roll Mill. 40HP Motor, with clutch brake. Friction ratio 1.1 Manual Nips. On one-piece steel bedplate.
used
Reed 40” x 16” Two Roll Mill Hand operated nips Right angle drive Tray fitted beneath Mill Rolls
used
Reed switch, 4 pieces KÄRCHER 2.880-194 Switch head: Ø 8 mm, length: 85 mm approx. 1.0 m connection cable New ! Dimensions ( packaging ): 235 x 75 x 75 mm
used
Relays, with reed contacts ELEKTRO-APPARATE-WERKE BERLIN-TREPTOW RELOG 2RG01 PL - No.: 731073000 24 V DC Spool: 807 383/3 10 Reed Contacts IP40 New ! Dimensions: 80 x 80 x 30 mm
used
Relay, with reed contacts ELEKTRO-APPARATE-WERKE BERLIN-TREPTOW RELOG 2RG01 PL - No.: 731082000 60 V DC 2 Coils : 402.602-6/1.56 + 402.601-8/1.56 2 + 4 reed contacts IP40 New ! Dimensions: 80 x 80 x 30 mm
used
Relay, with reed contacts ELEKTRO-APPARATE-WERKE BERLIN-TREPTOW RELOG 2RG04 PL - No.: 737003203 60 V DC 2 coils 1 + 2 reed contacts IP40 New ! Dimensions: 80 x 80 x 30 mm
used
There is a complete oil/rap mill, suitable for cleaning, conditioning and pressing available, the plant was operated until 2009 on 320 days a year, thereafter until 2016 only temporarily, includes (1) 22x elevators/TKF/KBW Ilchmann, Ergewa, CIMBRIA Hernig, type: A250-350, SU 200-400, TKF, KBW (2) 3x Discharge Screw Ergewa A350x1760 to 4880 (3) Screening Machine CIMBRIA 117, dimensions screening area: 18m² (4) Weighfeeder Herweg HDW 65/2,0-O, output: 12.5t/h (5) Drum Magnetic Separator Allgeier Ø400x800, speed: 35/min (6) Flaking Roller Mill CIMBRIA FW 812 (7) 3x Heat Pan CIMBRIA W255/7-1 (7) 3x Screw Presses CIMBRIA EP 26.1-W 255/7-1 (8) Trub separator CIMBRIA TAS 5 (9) Plate heat exchanger Thermowave TL 150 KBCL (10) 2x Plate filter Lochem Filter MVDCD 1225/1250/30/15 (10) Reed cooler Wessel GmbH GSK 250, with documentation, an on-site inspection is possible.O, output: 12.5t/h (5) Dru ...
used
Relays, with reed contacts ELEKTRO-APPARATE-WERKE BERLIN-TREPTOW RELOG 2RG01 PL - No.: 770034000 TGL 26047 60 V DC Coil: 401.641-8/1.56 10 Reed Contacts IP40 New !IP40br /br /New ! Dimensions: 80 x 80 x 30 mm
used
Relays, with reed contacts ELEKTRO-APPARATE-WERKE BERLIN-TREPTOW RELOG 2RG01 PL - No.: 731080000 TGL 26047 24 V DC 2 Coils: 402.602-6/1.24 + 402.601-8/1.24 2 + 4 reed contacts IP40 New ! Dimensions: 80 x 80 x 30 mm
used
Relays, with reed contacts ELEKTRO-APPARATE-WERKE BERLIN-TREPTOW RELOG 2RG03 PL - No.: 737 000 206 TGL 26047 Coil resistance: 2700 Ohm coil: 403.601-1/8.06 1 Reed contact IP40 New !br /br /IP40br /br /New ! Dimensions: 80 x 80 x 30 mm
used
Relays, with reed contacts ELEKTRO-APPARATE-WERKE BERLIN-TREPTOW RELOG 2RG01 PL - No.: 770032000 TGL 26047 24 V D coil: 807 384/3 10 Reed contacts IP40 New !br Dimensions: 80 x 80 x 30 mm
used
Relays, with reed contacts ELEKTRO-APPARATE-WERKE BERLIN-TREPTOW RELOG 2RG01 PL - No.: 731072000 12 V DC coil: 807 383/2 10 Reed contacts IP40 New ! Dimensions: 80 x 80 x 30 mm
used
Relays, with reed contacts ELEKTRO-APPARATE-WERKE BERLIN-TREPTOW RELOG 2RG01 PL - No.: 731077000 220 V DC coil: 807 384/7 10 reed contacts IP40 New ! Dimensions: 80 x 80 x 30 mm
used
Relays, with reed contacts ELEKTRO-APPARATE-WERKE BERLIN-TREPTOW RELOG 2RG01 PL - No.: 731075000 60 V DC Coil: 807 383/5 10 Reed contacts IP40 New ! Dimensions: 80 x 80 x 30 mm
used
steel silos 21 m3 and 29 m3, Payload approx. 40 to, net weight 3,300 kg / 3,900 kg, outlet height 2,050 mm, stand area 2,800 x 2,900 mm, passage width 2,000 x 2,300 mm, outlet flap NW 250,colour s 21 RAL 6005, moss green - shade S 29 RAL 6013, reed green
new
Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine in the High-Z series. With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the High-Z CNC unit, they acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable guid ...
new
Specifications / Technical Data S-720 CNC-Fraesmaschine With the High-Z CNC-Fraes.- and Engraving Machine you acquire an all-round talent in TUeV-certified Quality (EMV). Whether you want to clamp complex parts on a groove table or, or put factory tins in a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are protected with a double-secured emergency exit button. Another is located directly at the controller. Basic equipment of all high- ...
new
Specifications / Technical data S-1400/T 3-axis CNC-portal-machine and engraving machine (Attention: Pictures show the High-Z S-1400 with trapezoidal thread spindles, this differs exclusively by the spindles . With the T-variant of the high-Z CNC fraes machine, you acquire old-fashioned technology with the certain I-meat in TUeV-certified quality (EMC). The High-Z/T is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. Through the ball-circulation spindles used, the High-Z/T portalfraes machine achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm. At the same time, high travel speeds of up to approx. 108mm / second ( 6500 mm / minute ) can be achieved. This means engraving and fraes speeds of up to approx. 4500mm/min can be realized and urgent journeys up to approx. 7000mm/min. Here you can s ...
new
Specifications / Technical data S-1000/T Portalfraesmaschine / Engraving machine With the T-variant of the High-Z CNC-Fraese you acquire old-fashioned technology with the certain i-tuepfelchen in TUeV-certified quality (Emc). The High-Z/T Fraese is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. Through the ball-circuit spindles used, the High-Z/T achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm. At the same time, high travel speeds of up to approx. 108mm / second ( 6500 mm / minute ) can be achieved. This is how engraving and fraes speeds of up to approx. 4500mm/min can be realized and urgent journeys up to approx. 7000mm/min. Here you can see a video about empty runs with the new high-Z/T 3D CNC machine. This makes this machine series in the industrial sector just as applicable for work ...
new
Specifications / Technical Data S-720/T CNC-Fraesmaschine und Graviermaschine / Fraese With the T-variant of the High-Z CNC Fraes.-and engraving machine you acquire old-fashioned technology with the certain i-Tpuelchen in TUeV-certified quality (EMC). The High-Z/T CNC-Fraese is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. The high-Z/T CNC-Fraese achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm due to the ball's circulation spindles. At the same time, high travel speeds of up to 108mm/second ( 6500mm/ minute) can be achieved. This allows engraving and feeding speeds of up to approx. 4500mm/min and express ingesses up to approx. 7000mm/min. Here you can watch a video of empty journeys with the new High-Z/T. This series of mechanical engineering is just as applicable in the industrial sec ...
new
Item condition: New. Machine is delivered pre-assembled and tested. Specifications / Technical Data S-720 CNC-Fraesmaschine Engravings of all kinds, even on glass, VHM, carbide and up to 62 RC hard steel ! With the High-Z CNC-Fraes.- and Engraving Machine they acquire an all-round talent. Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are pr ...
used
CNC Router and 3D engraving machine T-Rex 0712: Equipment / product data CNC-milling machine type High-Z/TRex series: Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all axis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 17.000 mm/min Operating speed max. ca. 12.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table1650 x 880 mm Travels: X=1200mm; Y=700mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions ...
used
3D CNC Router T-Rex 1215 / Technical Data : Equipment / product data CNC-milling machine type High-Z/TRex series: Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all exis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 1860 x 1340 mm Travels: X=1500mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions wi ...
new
Specifications / Technical Data S-400 Fraes machine / engraving machine With the High-Z CNC-Fraes.- and engraving machine you acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or put factory tins in a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are protected with a double-secured emergency exit button. Another is located directly at the controller. Basic equip ...
new
Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine of the high-Z series in TUeV-certified quality (EMC). With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the high-z CNC unit, they acquire an all-round talent. Whether you want to clamp complex parts on a groove table or, or clamp the factory into a high vice (the machine stands on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be processed). Or just do engraving or drilling then they simply work on a flat surface, on which they then attach, for example, an MDF plate, which they once plan overfraes and are then able to work exactly in depth up to approx. +/- 0.02mm. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable ...
new
Specifications / Technical Data S-400 Fraes machine / engraving machine With the High-Z CNC-Fraes.- and engraving machine you acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or put factory tins in a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +/-0,02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are protected with a double-secured emergency exit button. Another is located directly at the controller. Basic equip ...
used
Equiptment / product data CNC-milling machine type High-Z/TRex series / 1224 Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all axis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 2800 x 1340 mm Travels: X=2400mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions with engines : LxBxH ca. 3070 x 1800 x ...
new
Specifications / Technical data S-400/T CNC-Portalfraesmaschine / Engraving machine Granite, marble, slate, soapstone engraving, photoengraving, fraesen... With the T-variant of the High-Z CNC-Fraesmachine you acquire old-guarded technology with the certain i-Tuepfelchen in TUeV-Qualitat. The High-Z/T is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. Through the ball-circulation spindles used, the High-Z/T CNC-Fraes machine achieves a fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm. At the same time, high travel speeds of up to approx. 108mm / second ( 6500 mm / minute ) can be achieved. This means engraving and fraes speeds of up to approx. 4500mm/min can be realized and urgent journeys up to approx. 7000mm/min. Here you can see a video about empty journeys with the new High-Z/T. This makes t ...
new
Item condition: New. Machine is delivered pre-assembled and tested! Specifications / Specifications S-720/T CNC-Fraesmaschine and G raviermaschine / Fraese With the T-variant of the High-Z CNC Fraes.- and engraving machine you acquire old-fashioned technology with the certain I-Tpfelchen in TUeV-certified quality (EMC). The High-Z/T CNC-Fraese is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. The high-Z/T CNC-Fraese achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm due to the ball's circulation spindles. At the same time, high travel speeds of up to 108mm/second ( 6500mm/ minute) can be achieved. This allows engraving and feeding speeds of up to approx. 4500mm/min and express ingess esons up to approx. 7000mm/min. Here you can watch a video of empty journeys with the new High-Z/T. This i ...
used
10 stupid pneumatic cylinder double acting RT/57216/M/50 Diameter 16mm Piston path 50mm p 1-10bar Tmax 80C L2H (new price per piece 31.52.-EUR) Additional ly20 piece Norgren Reed Switch M/50/LSU/2V Lock (NP24.95/pc) Additional items Screw fittings and connections Additional mounting kit QM/33/016/23 Pneumatics, hydraulics, drive elements Special price
used
USED STAINLESS STEEL 5000 LITRES REACTOR WITH AGITATION AND HALF-COIL JACKET REF.: C6844 General characteristics: Material Stainless steel Weight 1.450 kg Technical characteristics: Capacity 2.000 litros Bottom type Inf. Champagne - Sup. klopper Half Reed + Type of agitation Impeller On Brackets Vessel outside diameter 1800 mm Vessel height 1800 mm Vessel height + funds TOTAL: 4.850 mm Motor characteristics: Power 4 kW Rotational speed 700 rpm
used
Relay, with reed contacts and internal rectifier module ELEKTRO-APPARATE-WERKE BERLIN-TREPTOW RELOG 2RG05 PL - No.: 731438000 220 V AC Coil: 403.601-1/8.03 1 Reedkontakt IP40 New ! Dimensions: 80 x 80 x 30 mm
used
DECO 2000-26 year 2001 IEMCA BOSS 445 bar feeder + SERMETO chip conveyor + parts conveyor belt. 40269 Working hours S1 spindle capacity 32 mm (main headstock spindle) S4 spindle capacity 32 mm (against spindle) main operation: 2 combs capacity 5 tools each S2 motorization at reed 2 with mounting of 4 rotary tools possible A device at the end capacity 4 tools S3 motorization at the end device with mounting of 4 rotary tools possible Counter operation: 4 longitudinal fixed or rotating tools 3 transverse fixed or rotating tools S5 transverse and longitudinal engines. Pneumatic part ejector + jaws for part recovery (basket or mounted jaws) Many rotating and fixed tool holders supplied Many clamps and barrel provided Complete overhaul carried out by the machine manufacturer in December 2022 During this overhaul, the following elements were re ...
used
Signal module ELEKTRO-APPARATE-WERKE BERLIN-TREPTOW SES 122/1 PL - No.: 376199000 Article no.: 137 93 63 218 000056 Switching capacity: max. 20 VA Switching capacity: max. 60 V AC/DC, 1 A Supply voltage: 4,2 - 8.5 V DC with reed relay RGK 50/1 IP40 New ! Dimensions: 80 x 80 x 30 mm
used
Used conventional lathe Brand: TRENS Model: SN 630 S Year: 1996 Weight: 3800kg Lathe data: Distance between points: 3000mm Bench turning diameter: 645mm Dump diameter on cart: 350mm Turning diameter without neckline: 880mm Reed pitch: 77mm Point: Morse taper 5 Speeds: 18 (10 up to 1600rpm) Maximum weight of clamped piece: 1500kg Includes: - 310mm TOS 3-jaw chuck with sets of interior, exterior and soft jaws - 4-claw plate 500mm - Closed rear window 140mm - Closed rear window 260mm - Quick change turrets with 5 tool holders - All accessories in the photographs - Fagor 3-axis display Complies with CE regulations. It has a complete user manual in Spanish.
used
Limit sensor, for variable area flow meter, changeover, 4 pieces GEMÜ type: 1250 1250000Z00AT1 88310502 Output signal: 1 x reed contact, bistable, changeover contact Switching capacity: 250 V AC, 0,, 2 A, 10 W Material: PBTP ( polybutylene terephthalate ) Cable gland: PG 9 Can be clamped on for GEMÜ 815 variable area flow meter, 817, 830, 832, 835 and GEMÜ 865, 867, 880, 885 DN 25 Other quantities on request ! New ! Dimensions ( limit sensor ): 62 x 34 x 42 mm Dimensions ( packaging ): 150 x 115 x 70 mm
used
Limit sensor, for variable area flow meter, maximum contact, 4 pieces GEMÜ Type: 1251 1251000Z00000 88029062 Output signal: 1 x reed contact, bistable Switching capacity: 250 V AC, 1,, 0 A, 100 W Material: PBTP ( polybutylene terephthalate ) Cable gland: PG 9 Can be clamped on for GEMÜ 815 variable area flow meter, 817, 830, 832, 835 and GEMÜ 865, 867, 880, 885 DN 25 Other quantities on request ! New ! Dimensions ( limit sensor ): 62 x 34 x 42 mm Dimensions ( packaging ): 150 x 115 x 70 mm
used
Limit sensor, for variable area flow meter, minimum contact, 4 pieces GEMÜ Type: 1252 1252000Z00000 88029063 Output signal: 1 x reed contact, bistable Switching capacity: 250 V AC, 0,, 2 A, 10 VA Material: PBTP ( polybutylene terephthalate ) Cable gland: PG 9 Can be clamped on for GEMÜ 815 variable area flow meter, 817, 830, 832, 835 and GEMÜ 865, 867, 880, 885 DN 25 Other quantities on request ! New ! Dimensions ( limit sensor ): 62 x 34 x 42 mm Dimensions ( packaging ): 150 x 115 x 70 mm
used
Pneumatic cylinder, double-acting, with control valve NORGREN, IMI G18DD stroke: 200 mm rod diameter: Ø 32 mm rod thread: M27 x 2,0, Length: 55 mm Control valve: RXE9573-Z71-24S Control voltage: 24 V DC Operating pressure: 2.5 - 10 bar 2x REED switch: M/50/LSU/10V New ! Dimensions: 485 x 140 x 290 mm
used
Pressure valve, ring reed valve, compressor spare part GARDNER - DENVER 1300 AF/A valve seat diameter: Ø 111 mm, height: 9 mm valve diameter: Ø 118 mm, height: 67 mm used, tested ! Dimensions: 118 x 118 x 67 mm
used
Shredder for green waste, roots, waste wood, reed wood, organic waste, biomass, bark, etc. Equipment: Radio, hydraulic travel drive, overbelt magnet, SPECIAL FEATURE: Both shredding shafts, basket carrier with bio-cutting unit, baskets, tools, large service renewed before 100 hours of operation original Komptech.
used
Proximity Switch, Position Sensor FESTO SMEO-1-LED-24-B 30459 Measuring principle: magnetic, Reed material Housing: die-cast zinc approx. 2.5 m Connection cable New, with documents ! dimensions (sensor without cable): 37 x 16 x 16 mm dimensions ( packaging ): 240 x 200 x 20 mm
used
Proximity Switch, Position Sensor FESTO SMEO-1-B 30457 Measuring principle: magnetic, Reed Material Housing: die-cast zinc approx. 2.5 m Connection cable New, with documents !" dimensions ( sensor without cable ): 37 x 16 x 16 mm dimensions ( packaging ): 240 x 200 x 20 mm
used
Proximity Switch, Position Sensor FESTO SMEO-1-S-LED-24-B 150848 Measuring principle: magnetic, Reed Material Housing: PET Electrical connection: M8x1, 3-pin, plug New, with documents ! Dimensions (sensor): 42 x 16 x 16 mm Dimensions ( packaging ): 210 x 150 x 20 mm
used
Proximity Switch, Position Sensor FESTO SMEO-4U-S-LED-24-B 151526 Measuring Principle: Magnetic, Reed Material Housing: PET Electrical connection: M8 x 1, 3-pin, plug New, with documents ! Dimensions (sensor): 23 x 21 x 10 mm Dimensions ( packaging ): 150 x 110 x 10 mm
used
Flow monitor KITAZAWA ND-16 Installation dimension ( without hose connections ): 120 mm thread: 11/2 ( inches ) Material: stainless steel ( 1. 4408 / 1.4401 ) switch: GREFE MESSGERÄTETECHNIK contact type: Changeover switch ( reed switch ) switching capacity: max. 500 V, max. 1.5 A, max. 20 VA approx. 1.8 m Connection cable New ! dimensions (without cable): 230 x 120 x 77 mm
used
Pos. 2 - supply to the cooling tunnel, single-strand, equipped with cornering plastic flat-top chain, 82.5 mm wide; Scaffolding in stainless, Execution; complete with supports, railing brackets and guides as well as drive motor block in, Hollow shaft version, make SEW, type DRN®, 400/230 V, 50 Hz, IP55, energy efficiency class IE3;, the conveyor system is equipped with a pneumatic stopper/slider combination., This is how the rows are formed and pushed off., Item 3 – cooling tunnel, The system is based on a mat chain conveyor that is guided through a cooling zone., Technical specifications, Conveyor capacity: 750 pieces/h, Inlet temperature approx.: 80°C, Outlet temperature approx.: 35 °C, Average room temperature approx.: 10 °C, Cooling time approx.: 55 min, cooling belt, Usable chain width: approx. 1,200 mm, Usable chain length: approx. 4,200 mm, Inlet/outlet height: approx. 1,000 ...
used
Trough chain conveyor TKF Redler up to 120 to/Hused Trough width inside approx.: 300 mm Trough depth inside approx.: 320 m Trough length approx.: 6800 mm Inlet opening approx.: 300 x 400 mm Exhaust opening approx.: 300 x 600 mm Taker distance approx.: 130 mm Drive motor NORD 220/380 V, 1.5 kW, 1410/18 rpm by replacing the engine, power can be increased Total length approx.: 6900 mm Other names: TKF, Reedler, Chain Conveyor
used
for Euro pallets 12 pcs task - removal roller conveyors 60mm rollers, 250cm length, 95cm width with 80mm brake rollers Of which 5 pcs with task guided tours on the side (yellow) 7 pcs with end plates as collection points 6 pcs taxiways á 250cm 95cm width 36h lower in slope heights 20st. Bracing under the reeds Palette with transition roller pieces and div fasteners Further pictures of the conveyor technology are welcome on request!