reducer used for sale

Cylinder pressure reducer, pressure reducer, pressure regulator FEINMECHANISCHE WERKE HALLE Acetylene Inlet pressure: 20 bar Pressure control range: 0 - 1.5 bar hose connection: G 3/8 ( inches ), grommet: Ø 9 mm Bottle connection: Stirrup New ! Dimensions ( cylinder pressure reducer ): 310 x 205 x 55 mm Dimensions ( packaging ): 300 x 250 x 80 mm

Reducer Concentric Reducer Concentric 160/90 SDR 1

Straight reducer fitting, reducer, cutting ring fitting, 10 pieces PARKER GR15/12LMS Operating pressure: max. 200 bar Material: Brass Tube outer diameter: Ø 15 / 12 mm width across flats: 27 / 22 mm with nut and cutting ring New ! Also available in other quantities ! Dimensions ( single screw connection ): 52 x 31 x 27 mm Dimensions ( packaging ): 125 x 125 x 65 mm

Pressure gauge shock reducer, for liquids and gases, 7 pieces PAGUS 1/2 ( inch ) Pmax. : 250 bar male thread: G 1/2 ( inch ) female thread: G 1/2 ( inch ) width across flats: 27 mm Material: Brass New ! Dimensions (single shock reducer): 65 x 35 x 30 mm

Pressure reducer cartridge SYR - SASSERATH 6247.50.900 DN 65 - 100 for flange pressure reducer 6247 ( until 12/2006 ) New, with documents ! Dimensions: 205 x 70 x 70 mm

CF reducer, 2 pieces VACOM TA063040R-304 302829 Inner diameter: DN 63 / DN 35 Connection flange: Ø 114 / 70 mm small flange rotatable Mounting length: 70 mm Material: Stainless steel 304 New ! Dimensions ( reducer ): 114 x 114 x 70 mm Dimensions ( packaging ): 230 x 115 x 70 mm

KF reducer, 9 pieces VACOM KF40R16-304 302053 Inner diameter: DN 40 / DN 16 Connection flange: Ø 55 / 30 mm installation length: 28 mm Material: stainless steel 304 New ! Dimensions ( reducer ): 55 x 28 x 55 mm Dimensions ( packaging ): 180 x 60 x 90 mm

Cylinder pressure reducer, pressure reducer, pressure regulator FEINMECHANISCHE WERKE HALLE Stickstoff Inlet pressure: 200 bar Pressure control range: 0 - 20 bar hose connection: G 1/4 ( inch ), grommet: Ø 6 mm Cylinder connection: W 24.3 x 1/14 (IG) New ! Dimensions: 210 x 210 x 55 mm

Cylinder Pressure Reducer, Pressure Reducer, Pressure Regulator FEINMECHANISCHE WERKE HALLE Oxygen Inlet pressure: 200 bar Pressure control range: 0 - 10 bar Hose connection: G 1/4 ( inch ) Cylinder connection: G 3/4 (IG) New ! Dimensions: 210 x 185 x 55 mm

Pressure reducer, pressure regulating valve, for domestic water HONEYWELL BRAUKMANN D 06 F ( D06F ) DN 15 / PN 25 installation dimensions: 80 mm ( pressure reducer ) / 205 mm ( with connections ) water connections: R1/2 housing material: brass New ! Dimensions: 230 x 205 x 110 mm

Used pressure reducers, fully functional, good condition 1x pressure reducer for helium, nitrogen and carbon dioxide each 200 bar / 10 bar

Reducer Concentric AGRU/TRACEABILITY 250/160 SDR 1

Reducer Concentric AGRU/TRACEABILITY 90/75 SDR17

Filter Pressure Reducer, Maintenance Unit PNEUMATECH 1100055 0.5 - 10 bar G 1 New ! Dimensions: 275 x 100 x 60 mm

Straight reducing fitting, reducer, cutting ring fitting, 10 pieces PARKER GR12/10LMS Operating pressure: max. 200 bar Material: Brass Tube outer diameter: Ø 12 / 10 mm width across flats: 22 / 19 mm with nut and cutting ring New ! Also available in other quantities ! Dimensions ( single screw connection ): 50 x 25 x 22 mm Dimensions ( packaging ): 125 x 125 x 65 mm

Filter pressure reducer, maintenance unit EAW REGLERWERK DRESDEN Type: 3.1026/12 0 - 400 kPa New ! Dimensions: 330 x 125 x 80 mm

Reducers, for pressure gauge connections with spigots, 8 pieces PAGUS M20 x 1.5 / 1/2 ( inches ) Pmax. : 250 bar external thread: M20 x 1.5 female thread: G 1/2 ( inch ) width across flats: 27 mm Material: brass 3 pieces with corrugated sealing seat 5 pieces with smooth sealing seat New ! Dimensions (single reducer): 49 / 47 x 35 x 30 mm

Filter pressure reducer, maintenance unit EAW, ELEKTRONIK DRESDEN Type: 3.1028/13 Control range: 0 - 600 kPa ( 0 - 6 bar ) Pmax.: 1 MPa ( 10 bar ) installation length: 72 mm Connection thread ( inside ): M16 x 1.5 New ! Dimensions: 330 x 72 x 122 mm

Filter pressure reducer, maintenance unit EAW REGLERWERK DRESDEN Type: 3.1026/18 0 - 1 MPa New ! Dimensions: 330 x 125 x 80 mm

Pressure reducer, pressure regulator FEINMECHANISCHE WERKE HALLE NW5 Pressure control range: 0 - 10 bar ( 0 - 1 MPa ) Connection thread: 3/8 ( inch ) Installation dimensions: 88 mm New ! Dimensions: 185 x 88 x 55 mm

Filter pressure reducer, maintenance unit EAW REGLERWERK DRESDEN Type: 3.1026/17 0 - 140 (400) kPa New ! Dimensions: 320 x 150 x 135 mm

Filter pressure reducer, maintenance unit EAW REGLERWERK DRESDEN Type: 3.1003/01 0 - 4 kp/cm² New ! Dimensions: 330 x 125 x 80 mm

Filter pressure reducer, maintenance unit EAW REGLERWERK DRESDEN Type: 3.1026/13 0 - 1 MPa New ! Dimensions: 345 x 125 x 80 mm

Pressure reducer HONEYWELL BRAUKMANN D22-1/2A 1.0 - 10.0 bar DN15 PN40 New ! Dimensions: 150 x 80 x 60 mm

Pressure reducer FORKARDT 15PN25 DN15 PN25 New ! Dimensions: 210 x 90 x 70 mm

Pressure reducer HOFMANN RK4D 15PN25 DN15 PN25 New ! Dimensions: 200 x 90 x 70 mm

Pressure reducer FORKARDT LFA3 130004 0200.08 E808 DN50 New ! Dimensions: 380 x 150 x 130 mm

Pressure reducer, precision pressure regulator PARKER R216G02E/N p: 0 - 8 bar p max: 20 bar G1/4 used, tested ! Dimensions: 180 x 125 x 170 mm

Acetylene pressure reducer pressure regulator MESSER GRIESHEIM / WITT U13 / 06D-57 357DH P1: 25 bar / P2: 1,5 bar SV 73.97 P: 1,9 bar FN 12-021 001 Pmax: 1,5 bar HDS17/017 Pmax: 25 bar used, tested ! Dimensions: 380 x 550 x 170 mm,

Pressure reducer, pressure regulator DRUVA FMD 670-99 A ( FMD670-99A ) Inlet pressure: max. 200 bar outlet pressure: 0.5 - 3.0 bar Material: Brass, PVDF New ! Dimensions: 120 x 110 x 115 mm

Stainless steel pressure reducer for oxygen MANKENBERG 762 DN 40 / NF 6630024TA-5 temp.: 80°C 0.01 to 0.05 bar flange Ø 150 mm stainless steel ! Dimensions: 350 x 265 x 235 mm

Pressure reducer, pressure regulating valve MANKENBERG 652 G1 6570036TA-EM temp.: 130°C 2 to 5 bar PN 40/10 stainless steel New ! Dimensions: 310 x 145 x 115 mm

Pressure reducer, pressure regulating valve, for domestic water, with strainer HONEYWELL BRAUKMANN D 06 F ( D06F ) 1/2- DVGW 0432 Installation dimensions: 80 mm Water connections: R1/2 housing material: brass New, with documents ! Dimensions ( pressure minder ): 80 x 64 x 150 mm

Pressure reducer, pressure regulating valve, for domestic water, with strainer, 2 pieces KEMPER Figure 710 0G 7100G01500 < br />DVGW P-IX 7898/I DN15 Installation dimensions: 90 mm Water connections: G3/4 Brass New ! Dimensions ( pressure reminder ): 175 x 90 x 80 mm Dimensions ( packaging ): 180 x 175 x 80 mm

Pressure reducer, pressure regulating valve, for domestic water HONEYWELL D06FN-1/2B DN 15 PN 25 Installation dimensions: 80 mm Water connections: R1/2 inch housing material: brass New, with documents ! Dimensions ( pressure reminder ): 205 x 80 x 70 mm Dimensions ( packaging ): 215 x 115 x 80 mm

Pressure reducer, pressure regulating valve, for domestic water, with strainer PAGUS 1/2 inch set pressure: 4 bar installation dimension: 125 mm water connections: 1/2 ( inch ) thread: 3/4 ( inch ) housing material: brass new, with documents ! Dimensions: 150 x 125 x 70 mm

Pressure reducers, pressure regulators, manometers -for nitrogen -Inlet pressure: max. 200 bar -Outlet pressure: 0 - 50 bar adjustable -Number: 1x reducer available -Price: per piece -Weight: 1.6 kg/piece

Pressure reducers, pressure regulators, manometers -for nitrogen -Inlet pressure: max. 25 bar -Outlet pressure: 0-1.5 bar adjustable -Number: 1x reducer available -Price: per piece -Weight: 1.3 kg/piece

Built: 2003 Condition: new Transmission ratio: 26.3 Input speed (n1): 2000 rpm Output speed: 76.2 rpm Efficiency: 0.94 Dimensions: Length 790 mm (without shaft), 966 mm with shaft Width: 450 mm Height: 300 mm Shaft diameter: 155 mm Weight: 352 kg For further technical information, please refer to the uploaded data sheet.

Pressure reducers, pressure regulators -Type: D14100 -Connection -Input: max. 20 bar -Output: max. 10 mbar -Weight: 2.7 kg

Pressure reducers, pressure regulators -Type: 002 3539 -Connection: -Price: per piece -Number: 9x available -Weight: 0.5 kg/piece

Pressure reducers, pressure regulators -Type: 444.223 -Connection: 1/4 -Price: per piece -Number: 8x available -Weight: 0.4 kg/piece

Pressure reducers, pressure regulators, manometers -for: forming gas -Output: flow meter -Dimensions: 240/200/H70 mm -Weight: 1.1 kg

2 pieces, reducing sleeves RH RÖHM 262 MK5 : MK3 DIN 2185 Dimensions: 170 x 40 x 90 mm

KF-CF Reducing Adapter T-Piece PAGUS DN50 / 2x DN40 KF50: Nominal diameter: DN 50, Flange diameter: Ø 75 mm KF40: Nominal diameter: DN 40 Flange diameter: Ø 55 mm CF40: Nominal diameter: DN 40 Flange diameter: Ø 70 mm, rotatable installation length: 150 mm Material: Stainless steel New ! Dimensions: 150 x 97 x 75 mm

T-piece with reduction +GF+ ( GEORG FISCHER ) DN65 / DN32 / DN20 sealing flange diameter: Ø 121 / 68 mm Loose flange diameter: Ø 185 mm bolt circle diameter: Ø 150 mm 4x bore: Ø 18 mm DN 65 PN 16 reduction1 to DN 32, External thread G2 ( inches ) reduction2 to DN 20, female thread G3/4 ( inches ) Material: Polypropylene ( abbreviation PP ) New ! Dimensions: 270 x 190 x 270 mm

T-piece with reduction +GF+ ( GEORG FISCHER ) DN65 / DN32 / DN20 sealing flange diameter: Ø 121 / 68 mm Loose flange diameter: Ø 185 mm bolt circle diameter: Ø 150 mm 4x bore: Ø 18 mm DN 65 PN 16 reduction1 to DN 32, External thread G2 ( inch ) reduction2 to DN 20, female thread G3/4 ( inch ) Material: Polypropylene ( abbreviation PP ) New ! Dimensions: 270 x 190 x 310 mm

Pressure reducers, pressure regulators, manometers -for forming gas -Inlet pressure: max. 200 bar -Output: flow meter -Number: 2x reducers available -Price: per piece -Weight: 1.8 kg/piece

Pressure reducers, pressure regulators, manometers -Inlet pressure: max. 200 bar -Control range up to: 20 bar -Dimensions: 190/70/H170 mm -Weight: 1.6 kg/piece

Description: MK5-MK4 delivered in original packaging unused ! Approx. Onsite Dimension. (l x w x h): 170 x 45 x 45 mm, weight approx.: 1 kg